Replace all inline definitions with GFXINLINE

16 files changed, 138 insertions, 138 deletions

diff --git a/boards/addons/gdisp/board_ED060SC4_example.h b/boards/addons/gdisp/board_ED060SC4_example.h
index 008e85d4..4c25ba55 100644
--- a/boards/addons/gdisp/board_ED060SC4_example.h
+++ b/boards/addons/gdisp/board_ED060SC4_example.h
@@ -45,7 +45,7 @@
 #define GPIOC_VPOS_CTRL     14
 #define GPIOC_VNEG_CTRL     15
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -76,68 +76,68 @@ static void eink_delay(int us) {
 }
 
 /* Turn the E-ink panel Vdd supply (+3.3V) on or off. */
-static inline void setpower_vdd(GDisplay *g, bool_t on) {
+static GFXINLINE void setpower_vdd(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_SMPS_CTRL, !on);
 	palWritePad(GPIOA, GPIOA_EINK_VDD, on);
 }
 
 /* Turn the E-ink panel negative supplies (-15V, -20V) on or off. */
-static inline void setpower_vneg(GDisplay *g, bool_t on) {
+static GFXINLINE void setpower_vneg(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOA, GPIOA_VNEG_CTRL, on);
 }
 
 /* Turn the E-ink panel positive supplies (-15V, -20V) on or off. */
-static inline void setpower_vpos(GDisplay *g, bool_t on) {
+static GFXINLINE void setpower_vpos(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOA, GPIOA_VPOS_CTRL, on);
 }
 
 /* Set the state of the LE (source driver Latch Enable) pin. */
-static inline void setpin_le(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_le(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_LE, on);
 }
 
 /* Set the state of the OE (source driver Output Enable) pin. */
-static inline void setpin_oe(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_oe(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_OE, on);
 }
 
 /* Set the state of the CL (source driver Clock) pin. */
-static inline void setpin_cl(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_cl(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_CL, on);
 }
 
 /* Set the state of the SPH (source driver Start Pulse Horizontal) pin. */
-static inline void setpin_sph(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_sph(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_SPH, on);
 }
 
 /* Set the state of the D0-D7 (source driver Data) pins. */
-static inline void setpins_data(GDisplay *g, uint8_t value) {
+static GFXINLINE void setpins_data(GDisplay *g, uint8_t value) {
 	(void) g;
 	palWriteGroup(GPIOB, 0xFF, GPIOB_EINK_D0, value);
 }
 
 /* Set the state of the CKV (gate driver Clock Vertical) pin. */
-static inline void setpin_ckv(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_ckv(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_CKV, on);
 }
 
 /* Set the state of the GMODE (gate driver Gate Mode) pin. */
-static inline void setpin_gmode(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_gmode(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOC, GPIOC_EINK_GMODE, on);
 }
 
 /* Set the state of the SPV (gate driver Start Pulse Vertical) pin. */
-static inline void setpin_spv(GDisplay *g, bool_t on) {
+static GFXINLINE void setpin_spv(GDisplay *g, bool_t on) {
 	(void) g;
 	palWritePad(GPIOB, GPIOB_EINK_SPV, on);
 }
diff --git a/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h b/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
index 341f4366..bece729d 100644
--- a/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
+++ b/boards/addons/gdisp/board_HX8347D_stm32f4discovery.h
@@ -67,7 +67,7 @@ static const SPIConfig spi1cfg_16bit = {
 	SPI_CR1_DFF //SPI_CR1_BR_0
 };
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -99,11 +99,11 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	if (state) {
 		CLR_RST;
@@ -112,35 +112,35 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
 	}
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 	pwmEnableChannel(&PWMD4, 1, percent);
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 	spiAcquireBus(&SPID1);
     while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));		// Safety
 	CLR_CS;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 	SET_CS;
 	spiReleaseBus(&SPID1);
 }
 
-static inline void busmode16(GDisplay *g) {
+static GFXINLINE void busmode16(GDisplay *g) {
 	(void) g;
 	spiStart(&SPID1, &spi1cfg_16bit);
 }
 
-static inline void busmode8(GDisplay *g) {
+static GFXINLINE void busmode8(GDisplay *g) {
 	(void) g;
 	spiStart(&SPID1, &spi1cfg_8bit);
 }
 
-static inline void write_index(GDisplay *g, uint8_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint8_t index) {
 	(void) g;
     CLR_DATA;
     SPI1->DR = index;
@@ -148,13 +148,13 @@ static inline void write_index(GDisplay *g, uint8_t index) {
     SET_DATA;
 }
 
-static inline void write_data(GDisplay *g, uint8_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint8_t data) {
 	(void) g;
     SPI1->DR = data;
     while(((SPI1->SR & SPI_SR_TXE) == 0) || ((SPI1->SR & SPI_SR_BSY) != 0));
 }
 
-static inline void write_ram16(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_ram16(GDisplay *g, uint16_t data) {
 	(void) g;
     SPI1->DR      = data;
     while((SPI1->SR & SPI_SR_TXE) == 0);
diff --git a/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h b/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
index 0e399f1f..8ae7715f 100644
--- a/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
+++ b/boards/addons/gdisp/board_ILI9320_olimex_pic32mx_lcd.h
@@ -64,7 +64,7 @@ static void init_board(GDisplay *g) {
 
 #define PmpWaitBusy()   do {} while (PMMODEbits.BUSY)
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
@@ -84,11 +84,11 @@ static void set_backlight(GDisplay *g, uint8_t percent) {
 		palSetPad(IOPORTD, 3);
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
@@ -112,11 +112,11 @@ static noinline void write_data(GDisplay *g, uint16_t data) {
 	PmpWaitBusy();
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 }
 
diff --git a/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h b/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
index 87c4530d..51090f5d 100644
--- a/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
+++ b/boards/addons/gdisp/board_ILI9325_hy_stm32_100p.h
@@ -34,7 +34,7 @@
 #define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
 #define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -64,11 +64,11 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	if(state)
 		palClearPad(GPIOE, GPIOE_TFT_RST);
@@ -76,38 +76,38 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
 		palSetPad(GPIOE, GPIOE_TFT_RST);
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 	(void)percent;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	GDISP_REG = index;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	GDISP_RAM = data;
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 }
 
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	(void) g;
 	return GDISP_RAM;
 }
diff --git a/boards/addons/gdisp/board_ILI9341_spi.h b/boards/addons/gdisp/board_ILI9341_spi.h
index 4b3b058d..fbb710b0 100644
--- a/boards/addons/gdisp/board_ILI9341_spi.h
+++ b/boards/addons/gdisp/board_ILI9341_spi.h
@@ -55,7 +55,7 @@ static void send_data(uint16_t data);
  *
  * @notapi
  */
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
   // As we are not using multiple displays we set g->board to NULL as we don't use it.
   g->board = 0;
@@ -75,7 +75,7 @@ static inline void init_board(GDisplay *g) {
  *
  * @notapi
  */
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
@@ -87,7 +87,7 @@ static inline void post_init_board(GDisplay *g) {
  * 
  * @notapi
  */
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 
 	if (state == TRUE) {
@@ -105,7 +105,7 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
  * 
  * @notapi
  */
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 	(void) percent;
 }
@@ -117,7 +117,7 @@ static inline void set_backlight(GDisplay *g, uint8_t percent) {
  *
  * @notapi
  */
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
@@ -128,7 +128,7 @@ static inline void acquire_bus(GDisplay *g) {
  *
  * @notapi
  */
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
@@ -139,7 +139,7 @@ static inline void release_bus(GDisplay *g) {
  * 
  * @notapi
  */
-static inline void send_data(uint16_t data) {
+static GFXINLINE void send_data(uint16_t data) {
 // http://forum.easyelectronics.ru/viewtopic.php?p=262122#p262122
   while (!(SPI2->SR & SPI_SR_TXE)); // при входе на отправку проверяем - а пустой ли SPI_DR
   SPI2->DR = data; // загрузили в SPI_DR код команды
@@ -154,7 +154,7 @@ static inline void send_data(uint16_t data) {
  *
  * @notapi
  */
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 
   while (SPI2->SR & SPI_SR_BSY);
@@ -177,7 +177,7 @@ static inline void write_index(GDisplay *g, uint16_t index) {
  * 
  * @notapi
  */
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 
   send_data(data);
@@ -190,7 +190,7 @@ static inline void write_data(GDisplay *g, uint16_t data) {
  *
  * @notapi
  */
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 }
 
@@ -201,7 +201,7 @@ static inline void setreadmode(GDisplay *g) {
  *
  * @notapi
  */
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 }
 
@@ -213,7 +213,7 @@ static inline void setwritemode(GDisplay *g) {
  *
  * @notapi
  */
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	(void) g;
 	return 0;
 }
diff --git a/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h b/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
index 08cbaf3d..fb57fb62 100644
--- a/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
+++ b/boards/addons/gdisp/board_ILI9481_firebullstm32f103.h
@@ -27,7 +27,7 @@
 #define SET_RD		palSetPad(GPIOD, 15);
 #define CLR_RD		palClearPad(GPIOD, 15);
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -49,53 +49,53 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 	(void) percent;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	palWritePort(GPIOE, index);
 	CLR_RS; CLR_WR; SET_WR; SET_RS;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	palWritePort(GPIOE, data);
 	CLR_WR; SET_WR;
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 	// change pin mode to digital input
 	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_INPUT);
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 	// change pin mode back to digital output
 	palSetGroupMode(GPIOE, PAL_WHOLE_PORT, 0, PAL_MODE_OUTPUT_PUSHPULL);
 }
 
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	uint16_t	value;
 	(void) g;
 	
diff --git a/boards/addons/gdisp/board_S6D1121_olimex_e407.h b/boards/addons/gdisp/board_S6D1121_olimex_e407.h
index 1e2b53f7..fd924e7f 100644
--- a/boards/addons/gdisp/board_S6D1121_olimex_e407.h
+++ b/boards/addons/gdisp/board_S6D1121_olimex_e407.h
@@ -21,7 +21,7 @@
 #define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
 #define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -50,43 +50,43 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
 	(void) percent;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	GDISP_REG = index;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	GDISP_RAM = data;
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 }
 
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	(void) g;
 	return GDISP_RAM;
 }
diff --git a/boards/addons/gdisp/board_SPFD54124B_stm32f3.h b/boards/addons/gdisp/board_SPFD54124B_stm32f3.h
index 765af495..df11a337 100644
--- a/boards/addons/gdisp/board_SPFD54124B_stm32f3.h
+++ b/boards/addons/gdisp/board_SPFD54124B_stm32f3.h
@@ -53,12 +53,12 @@ static const SPIConfig hs_spicfg = {
 #endif
 
 #if USE_SOFT_SPI
-static inline void soft_spi_sck(void){
+static GFXINLINE void soft_spi_sck(void){
   palSetPad(SPFD54124B_SPI_PORT, SPFD54124B_SPI_SCK);
   palClearPad(SPFD54124B_SPI_PORT, SPFD54124B_SPI_SCK);
 }
 
-static inline void soft_spi_write_9bit(uint16_t data){
+static GFXINLINE void soft_spi_write_9bit(uint16_t data){
 
   uint8_t i;
 
@@ -81,7 +81,7 @@ static inline void soft_spi_write_9bit(uint16_t data){
 }
 #endif
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
   (void) g;
   if(state) {
     CLR_RST;
@@ -90,7 +90,7 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
   }
 }
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
   // As we are not using multiple displays we set g->board to NULL as we don't use it.
   g->board = 0;
 
@@ -127,7 +127,7 @@ static inline void init_board(GDisplay *g) {
   }
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
   (void) g;
 #if USE_HARD_SPI
 #if GFX_USE_OS_CHIBIOS
@@ -138,7 +138,7 @@ static inline void acquire_bus(GDisplay *g) {
 #endif
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
   (void) g;
 #if USE_HARD_SPI
 #if GFX_USE_OS_CHIBIOS
@@ -148,7 +148,7 @@ static inline void release_bus(GDisplay *g) {
 #endif
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
   (void) g;
 
   uint16_t b;
@@ -176,7 +176,7 @@ static inline void write_data(GDisplay *g, uint16_t data) {
 
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
   (void)    g;
 
 #if USE_HARD_SPI
@@ -191,11 +191,11 @@ static inline void write_index(GDisplay *g, uint16_t index) {
 #endif
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
   (void) g;
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
   (void) g;
   (void) percent;
 }
diff --git a/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
index 6198b73a..33142e83 100644
--- a/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
+++ b/boards/addons/gdisp/board_SSD1289_stm32f4discovery.h
@@ -38,7 +38,7 @@ static const PWMConfig pwmcfg = {
 	0
 };
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -101,55 +101,55 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void set_backlight(GDisplay *g, uint8_t percent) {
+static GFXINLINE void set_backlight(GDisplay *g, uint8_t percent) {
 	(void) g;
     pwmEnableChannel(&PWMD3, 2, percent);
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	GDISP_REG = index;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	GDISP_RAM = data;
 }
 
-static inline void setreadmode(GDisplay *g) {
+static GFXINLINE void setreadmode(GDisplay *g) {
 	(void) g;
 	FSMC_Bank1->BTCR[FSMC_BANK+1] = FSMC_BTR1_ADDSET_3 | FSMC_BTR1_DATAST_3 | FSMC_BTR1_BUSTURN_0;		/* FSMC timing */
 }
 
-static inline void setwritemode(GDisplay *g) {
+static GFXINLINE void setwritemode(GDisplay *g) {
 	(void) g;
 	FSMC_Bank1->BTCR[FSMC_BANK+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0;		/* FSMC timing */
 }
 
-static inline uint16_t read_data(GDisplay *g) {
+static GFXINLINE uint16_t read_data(GDisplay *g) {
 	(void) g;
 	return GDISP_RAM;
 }
 
 #if defined(GDISP_USE_DMA) || defined(__DOXYGEN__)
-	static inline void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
+	static GFXINLINE void dma_with_noinc(GDisplay *g, color_t *buffer, int area) {
 		(void) g;
 		dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
 		dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
@@ -160,7 +160,7 @@ static inline uint16_t read_data(GDisplay *g) {
 		}
 	}
 
-	static inline void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
+	static GFXINLINE void dma_with_inc(GDisplay *g, color_t *buffer, int area) {
 		(void) g;
         dmaStreamSetPeripheral(GDISP_DMA_STREAM, buffer);
         dmaStreamSetMode(GDISP_DMA_STREAM, STM32_DMA_CR_PL(0) | STM32_DMA_CR_PINC | STM32_DMA_CR_PSIZE_HWORD | STM32_DMA_CR_MSIZE_HWORD | STM32_DMA_CR_DIR_M2M);
diff --git a/boards/addons/gdisp/board_SSD1306_i2c.h b/boards/addons/gdisp/board_SSD1306_i2c.h
index e147a918..ee92ded6 100644
--- a/boards/addons/gdisp/board_SSD1306_i2c.h
+++ b/boards/addons/gdisp/board_SSD1306_i2c.h
@@ -49,7 +49,7 @@ static I2CConfig i2cconfig;
 	static int32_t thdPriority = 0;
 #endif
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -78,11 +78,11 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	if(state)
 		CLR_RST
@@ -90,7 +90,7 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
 		SET_RST
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 	#if GFX_USE_OS_CHIBIOS
 		thdPriority = (int32_t)chThdGetPriority();
@@ -99,7 +99,7 @@ static inline void acquire_bus(GDisplay *g) {
 	i2cAcquireBus(&I2CD1);
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 	#if GFX_USE_OS_CHIBIOS
 		chThdSetPriority(thdPriority);
@@ -107,7 +107,7 @@ static inline void release_bus(GDisplay *g) {
 	i2cReleaseBus(&I2CD1);
 }
 
-static inline void write_cmd(GDisplay *g, uint8_t cmd) {
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
 	uint8_t command[2];
 	(void) g;
 
@@ -119,7 +119,7 @@ static inline void write_cmd(GDisplay *g, uint8_t cmd) {
 	i2cStop(&I2CD1);
 }
 
-static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
 	(void) g;
 
 	i2cStart(&I2CD1, &i2cconfig);
diff --git a/boards/addons/gdisp/board_SSD1306_spi.h b/boards/addons/gdisp/board_SSD1306_spi.h
index 56e1abae..f7b1ac6d 100644
--- a/boards/addons/gdisp/board_SSD1306_spi.h
+++ b/boards/addons/gdisp/board_SSD1306_spi.h
@@ -52,7 +52,7 @@ static const SPIConfig spi1config = {
 	static int32_t thdPriority = 0;
 #endif
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 	unsigned	i;
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
@@ -78,11 +78,11 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	if(state)
 		CLR_RST
@@ -90,7 +90,7 @@ static inline void setpin_reset(GDisplay *g, bool_t state) {
 		SET_RST
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 	#if GFX_USE_OS_CHIBIOS
 		thdPriority = (int32_t)chThdGetPriority();
@@ -99,7 +99,7 @@ static inline void acquire_bus(GDisplay *g) {
 	spiAcquireBus(&SPID1);
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 	#if GFX_USE_OS_CHIBIOS
 		chThdSetPriority(thdPriority);
@@ -107,7 +107,7 @@ static inline void release_bus(GDisplay *g) {
 	spiReleaseBus(&SPID1);
 }
 
-static inline void write_cmd(GDisplay *g, uint8_t cmd) {
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
 	uint8_t command[2];
 	(void)	g;
 
@@ -121,7 +121,7 @@ static inline void write_cmd(GDisplay *g, uint8_t cmd) {
 	spiStop(&SPID1);
 }
 
-static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
 	(void) g;
 
 	spiStart(&SPID1, &spi1config);
diff --git a/boards/addons/gdisp/board_SSD1306_spi2.h b/boards/addons/gdisp/board_SSD1306_spi2.h
index 5b647578..2bc0679f 100644
--- a/boards/addons/gdisp/board_SSD1306_spi2.h
+++ b/boards/addons/gdisp/board_SSD1306_spi2.h
@@ -33,7 +33,7 @@
 
 static SPIConfig spi_cfg = { NULL, CS_PORT, CS_PAD, 0 };
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 	(void) g;
 	g->board = 0; 
 	// Maximum speed of SSD1306 is 10Mhz, so set SPI speed less or = to that.  
@@ -73,31 +73,31 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	palWritePad(RESET_PORT, RESET_PAD, !state);
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 	spiAcquireBus(SPI_DRIVER);
 	spiStart(SPI_DRIVER, &spi_cfg); 
 	spiSelect(SPI_DRIVER);
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 	spiUnselect(SPI_DRIVER);
 	spiStop(SPI_DRIVER);
 	spiReleaseBus(SPI_DRIVER);
 }
 
-static inline void write_cmd(GDisplay *g, uint8_t cmd) {
+static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) {
 	(void) g;
 	static uint8_t buf;
 	palClearPad(DNC_PORT, DNC_PAD);
@@ -105,7 +105,7 @@ static inline void write_cmd(GDisplay *g, uint8_t cmd) {
 	spiSend(SPI_DRIVER, 1, &buf);
 }
 
-static inline void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
+static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) {
 	(void) g;
 	palSetPad(DNC_PORT, DNC_PAD);
 	spiSend(SPI_DRIVER, length, data);
diff --git a/boards/addons/gdisp/board_SSD1963_fsmc.h b/boards/addons/gdisp/board_SSD1963_fsmc.h
index 55fabacc..1bccac71 100644
--- a/boards/addons/gdisp/board_SSD1963_fsmc.h
+++ b/boards/addons/gdisp/board_SSD1963_fsmc.h
@@ -35,7 +35,7 @@ static const LCD_Parameters	DisplayTimings[] = {
 #define GDISP_REG              (*((volatile uint16_t *) 0x60000000)) /* RS = 0 */
 #define GDISP_RAM              (*((volatile uint16_t *) 0x60020000)) /* RS = 1 */
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -74,32 +74,32 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 	/* FSMC delay reduced as the controller now runs at full speed */
 	FSMC_Bank1->BTCR[0+1] = FSMC_BTR1_ADDSET_0 | FSMC_BTR1_DATAST_2 | FSMC_BTR1_BUSTURN_0 ;
 	FSMC_Bank1->BTCR[0] = FSMC_BCR1_MWID_0 | FSMC_BCR1_WREN | FSMC_BCR1_MBKEN;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	GDISP_REG = index;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	GDISP_RAM = data;
 }
diff --git a/boards/addons/gdisp/board_SSD1963_gpio.h b/boards/addons/gdisp/board_SSD1963_gpio.h
index cc7d1579..e3b80917 100644
--- a/boards/addons/gdisp/board_SSD1963_gpio.h
+++ b/boards/addons/gdisp/board_SSD1963_gpio.h
@@ -53,7 +53,7 @@ static const LCD_Parameters	DisplayTimings[] = {
 #define Set_RD		palSetPad(GDISP_CMD_PORT, GDISP_RD);
 #define Clr_RD		palClearPad(GDISP_CMD_PORT, GDISP_RD);
 
-static inline void init_board(GDisplay *g) {
+static GFXINLINE void init_board(GDisplay *g) {
 
 	// As we are not using multiple displays we set g->board to NULL as we don't use it.
 	g->board = 0;
@@ -68,33 +68,33 @@ static inline void init_board(GDisplay *g) {
 	}
 }
 
-static inline void post_init_board(GDisplay *g) {
+static GFXINLINE void post_init_board(GDisplay *g) {
 	(void) g;
 }
 
-static inline void setpin_reset(GDisplay *g, bool_t state) {
+static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) {
 	(void) g;
 	(void) state;
 }
 
-static inline void acquire_bus(GDisplay *g) {
+static GFXINLINE void acquire_bus(GDisplay *g) {
 	(void) g;
 	Set_CS;
 }
 
-static inline void release_bus(GDisplay *g) {
+static GFXINLINE void release_bus(GDisplay *g) {
 	(void) g;
 	Clr_CS;
 }
 
-static inline void write_index(GDisplay *g, uint16_t index) {
+static GFXINLINE void write_index(GDisplay *g, uint16_t index) {
 	(void) g;
 	Set_RS; Clr_RD; Set_WR;
 	palWritePort(GDISP_DATA_PORT, index);
 	Clr_WR;
 }
 
-static inline void write_data(GDisplay *g, uint16_t data) {
+static GFXINLINE void write_data(GDisplay *g, uint16_t data) {
 	(void) g;
 	Clr_RS; Clr_RD; Set_WR;
 	palWritePort(GDISP_DATA_PORT, data);
diff --git a/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
index af5f1282..94f393b5 100644
--- a/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
+++ b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_olimex_stm32_e407.h
@@ -44,13 +44,13 @@ static bool_t init_board(GMouse* m, unsigned driverinstance) {
 	return TRUE;
 }
 
-static inline bool_t getpin_pressed(GMouse* m) {
+static GFXINLINE bool_t getpin_pressed(GMouse* m) {
 	(void)		m;
 
 	return (!palReadPad(GPIOG, 0));
 }
 
-static inline void aquire_bus(GMouse* m) {
+static GFXINLINE void aquire_bus(GMouse* m) {
 	(void)		m;
 
 	spiAcquireBus(&SPID2);
@@ -58,7 +58,7 @@ static inline void aquire_bus(GMouse* m) {
     palClearPad(GPIOG, 10);
 }
 
-static inline void release_bus(GMouse* m) {
+static GFXINLINE void release_bus(GMouse* m) {
 	(void)		m;
 
 	palSetPad(GPIOG, 10);
@@ -66,7 +66,7 @@ static inline void release_bus(GMouse* m) {
     //TOUCHSCREEN_SPI_EPILOGUE();
 }
 
-static inline uint16_t read_value(GMouse* m, uint16_t port) {
+static GFXINLINE uint16_t read_value(GMouse* m, uint16_t port) {
     static uint8_t txbuf[3] = {0};
     static uint8_t rxbuf[3] = {0};
 	(void)		m;
diff --git a/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
index b4478d2b..83fb04fb 100644
--- a/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
+++ b/boards/addons/ginput/touch/ADS7843/ginput_lld_mouse_board_st_stm32f4_discovery.h
@@ -60,27 +60,27 @@ static bool_t init_board(GMouse* m, unsigned driverinstance) {
 	return TRUE;
 }
 
-static inline bool_t getpin_pressed(GMouse* m) {
+static GFXINLINE bool_t getpin_pressed(GMouse* m) {
 	(void)		m;
 
 	return (!palReadPad(GPIOC, 5));
 }
 
-static inline void aquire_bus(GMouse* m) {
+static GFXINLINE void aquire_bus(GMouse* m) {
 	(void)		m;
 
 	spiAcquireBus(&SPID2);
 	palClearPad(GPIOC, 4);
 }
 
-static inline void release_bus(GMouse* m) {
+static GFXINLINE void release_bus(GMouse* m) {
 	(void)		m;
 
 	palSetPad(GPIOC, 4);
 	spiReleaseBus(&SPID2);
 }
 
-static inline uint16_t read_value(GMouse* m, uint16_t port) {
+static GFXINLINE uint16_t read_value(GMouse* m, uint16_t port) {
 	static uint8_t txbuf[3] = {0};
 	static uint8_t rxbuf[3] = {0};
 	(void)		m;