aboutsummaryrefslogtreecommitdiffstats
path: root/Bootloaders
Commit message (Collapse)AuthorAgeFilesLines
* Fix TeensyHID bootloader - change vendor page in the descriptors to match ↵Dean Camera2009-12-233-43/+4
| | | | | | the undocumented page needed for the new Teensy 2.0 boards. Commit for the 091223 release.
* Ooops - TeensyHID bootloader makefile should use a 16MHz FCPU, not 8MHz.Dean Camera2009-12-211-1/+1
|
* Ensure that unsupported SetFeature/ClearFeature request targets cause a ↵Dean Camera2009-12-211-1/+1
| | | | STALL back to the host.
* Correct TeensyHID bootloader descriptors to use the correct revision code ↵Dean Camera2009-12-211-1/+1
| | | | for the ATMEGA32U4 based Teensy revision.
* Added new NO_DEVICE_SELF_POWER and NO_DEVICE_REMOTE_WAKEUP compile time options.Dean Camera2009-12-206-3/+9
|
* Fixed TeensyHID bootloader not enumerating to the host correctly.Dean Camera2009-12-204-50/+45
|
* Increase timeout of Mass Storage and Still Image host commands to 10 seconds ↵Dean Camera2009-12-091-2/+2
| | | | | | | | (up from 5) to account for slow-processing devices. Added brace guards to macros with parameters to prevent unintended changed evaluation of the macro expression. Minor code cleanups (remove redundant comments, fix spacing, etc.).
* Make sure that USB_STREAM_TIMEOUT_MS is set in the MassStorageHost ↵Dean Camera2009-12-081-3/+3
| | | | | | ClassDriver demo, so that slow devices don't time out the data pipe. Increase pipe timeout in both MassStorageHost demos to 5 seconds to account for the really slow devices. Fix TeensyHID bootloader not properly shutting down the USB interface to trigger a disconnection on the host before resetting the AVR.
* Add to the existing CDC Class Driver's CreateStream() function documentation ↵Dean Camera2009-11-292-7/+3
| | | | to explicitly state that the created streams are bidirectional.
* Minor code cleanups for clarity.Dean Camera2009-11-112-4/+3
|
* Spell check all source code variables, comments and strings.Dean Camera2009-11-095-5/+5
|
* Fix invalid Event name rule in demo/project makefiles.Dean Camera2009-10-164-4/+4
|
* Make Audio device demos compatible with AVRs running at 16MHz instead of 8MHz.Dean Camera2009-10-124-89/+11
| | | | Fix up demo documentation device compatibility list to be as general as possible to reduce changes required as Atmel releases more devices within the same USB AVR series.
* Added stdio.h stream examples for the virtual CDC UART in the CDC host demos.Dean Camera2009-10-111-1/+0
| | | | Removed accidental reference to the incomplete MIDI class bootloader in the Bootloader folder makefile.
* Application documentation/comment cleanup.Dean Camera2009-10-084-4/+2
|
* Add new MIDIHost LowLevel demo application.Dean Camera2009-10-081-2/+2
| | | | Make unfinished device mode applications use the VID/PID reserved for LUFA development devices.
* Removed mostly useless "TestApp" demo, as it was mainly useful only for ↵Dean Camera2009-09-3011-1/+3399
| | | | | | | | checking for sytax errors in the library. MIDI device demos now receive MIDI events from the host and display note ON messages via the board LEDs. Added beginnings of a MIDI class bootloader.
* Added new Pipe_IsFrozen() macro to determine if the currently selected pipe ↵Dean Camera2009-09-201-2/+2
| | | | | | | | is frozen. Added new USB_GetHIDReportSize() function to the HID report parser to retrieve the size of a given report by its ID. More additions to the unfinished HID Host Class Driver.
* Remove USE_NONSTANDARD_DESCRIPTOR_NAMES compile time token, split out ↵Dean Camera2009-09-093-3/+0
| | | | | | standard descriptors into seperate USB_Descriptor_* and USB_StdDescriptor_* structures so that both can be used within the one project. Add guard to the HID Host Class driver SetProtocol command, to ensure that the device supports boot protocol mode before issuing the request.
* Add link to third-party signed version of the official FLIP DFU driver for ↵Dean Camera2009-09-072-3/+7
| | | | | | 64-bit Windows OSes to the DFU bootloader readme file. Add HTML anchor links to URLs in the documentation to ensure that they are rendered correctly in the generated documentation.
* Remove information about 64 bit Windows OS signing requirements for the CDC ↵Dean Camera2009-09-071-5/+0
| | | | based demos -- apparently the native CDC driver can be installed without first disabling the OS's driver signing requirements.
* Corrected incorrect signature bytes for the AT90USB82 and added support for ↵Dean Camera2009-09-072-15/+26
| | | | | | the ATMEGAXX2 variant AVRs to the DFU bootloader. Added warning to the EVENT_USB_Device_Connect() and EVENT_USB_Device_Disconnect() events that they may be fired multiple times during device enumeration on the series 2 AVRs.
* Fixed DFU and CDC class bootloaders on the AT90USBXXX2 series USB AVRs.Dean Camera2009-09-064-20/+0
|
* Add in new invalid event hook check targets to project makefiles to produce ↵Dean Camera2009-09-063-90/+180
| | | | | | | | compilation errors when invalid event names are used in a project. Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.) Fix allowable F_CPU values comment in project makefiles.
* Added 64 bit OS driver installation instructions to the readme for all CDC ↵Dean Camera2009-09-061-28/+38
| | | | based projects.
* Changed Still Image Host class driver to auto-fill TransactionID element of ↵Dean Camera2009-09-061-31/+82
| | | | | | | | sent headers depending on the current session state. CDC based demos and project now work under 64 bit versions of Windows (thanks to Ronny Hanson, Thomas Bleeker). The Benito Programmer project now has its own unique VID/PID pair allocated from the Atmel donated LUFA VID/PID pool.
* Added beginnings of a new AVRISP-MKII clone project.Dean Camera2009-08-171-1/+1
| | | | | | Added new Endpoint_SetEndpointDirection() macro to set the current endpoint direction for bidirectional endpoints. Renamed internal USB_INT_ENDPOINT_SETUP macro to USB_INT_RXSTPI to fit in with the rest of the interrupt vector macros.
* Added explicit attribute masks to the device mode demos' descriptors.Dean Camera2009-08-132-4/+4
|
* Fixed issue in USBtoSerial demos where the USART Rx line was not having its ↵Dean Camera2009-08-051-9/+9
| | | | | | | | pullup enabled at startup, leading to noise being received from the Rx pin when left floating. Removed unused relative Common.h header include from the DriverStubs board stub drivers. Fixed Benito programmer, use the correct LED functions where needed to ensure correct status display at all times.
* Renamed all library events to properly seperate out Device and Host mode ↵Dean Camera2009-08-057-18/+18
| | | | | | | | events. Changed the firing conditions for some events to ensure that events are fired by their own USB mode only. Remove VBUS events - not needed as the library takes care of VBUS detection and feedback on supported AVRs via the USB_Device_Connected and USB_Device_Disconnected events. Fixed incorrect Host state assignment in the incomplete BluetoothHost demo.
* Rename TOTAL_NUM_CONFIGURATIONS to FIXED_NUM_CONFIGURATIONS, to match the ↵Dean Camera2009-08-026-6/+6
| | | | existing FIXED_CONTROL_ENDPOINT_SIZE compile time option. Add FIXED_NUM_CONFIGURATIONS to the descriptors of each project using the option.
* Renamed USB_Device_SetHighSpeed() to USB_Device_SetFullSpeed() so that the ↵Dean Camera2009-07-311-1/+0
| | | | | | correct terminology is used (thanks to Brian Dickman). Fix USB_PLL_Off() call in the series 4, 6 and 7 microcontroller disconnect interrupt handler code, which wasn't guarded by a test of USB_Options to check if the user has specified manual PLL control (thanks to Brian Dickman).
* Change project makefiles so that the current target settings and not just ↵Dean Camera2009-07-283-57/+60
| | | | | | the board selection is printed during the build process. Fix warning in AudioOutput demos when AUDIO_OUT_STEREO output mode is selected.
* Better solution - change compile time token names to DEVICE_STATE_AS_GPIOR ↵Dean Camera2009-07-283-3/+3
| | | | and HOST_STATE_AS_GPIOR and allow the user to set them to the index of the GPIOR register within the device to use.
* Added HOST_STATE_AS_GPIOR1 and DEVICE_STATE_AS_GPIOR0 compile time options, ↵Dean Camera2009-07-283-0/+3
| | | | the latter of which is used in the bootloaders, to reduce code size.
* Added new Benito project, a simple modified USB-to-Serial bridge for the ↵Dean Camera2009-07-231-1/+1
| | | | programming of AVRs using the official Arduino bootloader.
* Ensure that the USB_DeviceState variable is properly set upon wakeup events, ↵Dean Camera2009-07-231-1/+1
| | | | | | | | to the Addressed or Configured state as needed. Add explicit support for the AT90USB646 to the Teensy bootloader now that PJRC have released the Teensy++ board. Ensure unfinished SideShow demo uses an unallocated PID value within the LUFA range.
* Slight changes to TeensyHID bootloader to ensure it builds under the 2KB ↵Dean Camera2009-07-212-11/+0
| | | | | | boundary. Changed USB_Init() and USB_Shutdown() so that they are no longer dependant on oneanother for possible code savings when the interface is never explicitly shut down.
* Added new USB_DeviceState variable to keep track of the current Device mode ↵Dean Camera2009-07-213-51/+81
| | | | | | | | | | | | USB state. Added new Endpoint_ClearStatusStage() convenience function to assist with the status stages of control transfers. Removed vague USB_IsConnected global - test USB_DeviceState or USB_HostState explicitly to gain previous functionality. Removed USB_IsSuspended global - test USB_DeviceState against DEVICE_STATE_Suspended instead. Fixed possible enumeration errors from spinloops which may fail to exit if the USB connection is severed before the exit condition becomes true.
* Change Doxygen configuration files to not produce 4096 directories for the ↵Dean Camera2009-07-202-2/+2
| | | | | | documentation files -- the LUFA components do not generate enough documentation files to justify the large performance hit of creating so many directories. Fix missing Doxygen documentation in the Class Driver Mass Storage Device demo.
* Added new TOTAL_NUM_CONFIGURATIONS option, removed ↵Dean Camera2009-07-163-6/+6
| | | | | | USE_SINGLE_DEVICE_CONFIGURATION compile time option (but silently convert it to USE_SINGLE_DEVICE_CONFIGURATION internally for compatibility). Added new USE_FLASH_DESCRIPTORS compile time option. By default, descriptors can now lie in mixed memory spaces (specified by a new parameter to the CALLBACK_USB_GetDescriptor() function) unless one of the USE_*_DESCRIPTORS compile time option is specified.
* Added compatibility list to the documentation of each individual demo.Dean Camera2009-07-133-0/+33
| | | | | | Documented FAST_STREAM_TRANSFERS compile time option. Reduced the TCP window size for the RNDIS demos (Class and LowLevel) to make them compatible with the AT90USB64x.
* Added incomplete PrinterHost demo application.Dean Camera2009-07-113-3/+3
| | | | | | Seperated out Lib components of the incomplete BluetoothHost demo application out into a seperate Lib subfolder. Changed F_CLOCK entries in project makefiles to alias to F_CPU by default, as this is the most common case.
* Added const modifiers to device mode class drivers.Dean Camera2009-06-284-9/+9
| | | | | | Added parameter directions to function parameter documentation. Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).
* Optimize vendor/product description string display code in MassStorageHost.Dean Camera2009-06-264-14/+14
| | | | | | | | Remove all Host mode class demos other than the CDCHost class driver demo, so that they can be re-added as they are made once the host mode class framework is designed. Fixed USB_Host_SendControlRequest() not re-suspending the USB bus when initial device ready-wait fails. Fixed USB Pad regulator not being disabled on some AVR models when the USB_OPT_REG_DISABLED option is used.
* Add NO_INTERNAL_SERIAL compile time option to bootloaders to prevent them ↵Dean Camera2009-06-213-0/+3
| | | | from having unneccesary size increases from unused code.
* Re-add signature byte defines to the DFU and CDC class bootloaders -- the ↵Dean Camera2009-06-219-32/+74
| | | | SIGNATURE_x defines in the AVR device header files only exist in a newer version of avr-libc than is in the Debian repositories, causing build issues on Linux.
* Fix makefiles -- the auto-addition of -D switches to each LUFA compile time ↵Dean Camera2009-06-193-23/+23
| | | | option was faulty, due to GNUMake becomming confused by the spaces in the USE_STATIC_OPTIONS lines. Make user add in the switches explicitly instead.
* Move LUFA compile time options to a new section in the application makefiles ↵Dean Camera2009-06-193-15/+35
| | | | for clarity.
* Added new USB_Host_ClearPipeStall() convenience function to clear a stall ↵Dean Camera2009-06-183-12/+0
| | | | | | | | | | condition on an attached device's endpoint. Added new USB_Host_GetDeviceDescriptor() convenience function to retrieve the attached device's Device descriptor. Make Pipe_ConfigurePipe() mask the given endpoint number against PIPE_EPNUM_MASK to ensure the endpoint IN direction bit is cleared to prevent endpoint type corruption. Fix documentation mentioning Pipe_GetCurrentToken() function when real name is Pipe_GetPipeToken().