Add in new invalid event hook check targets to project makefiles to produce compilation errors when invalid event names are used in a project.

Re-add in flip, flip-ee, dfu and dfu-ee targets to project makefiles (thanks to Opendous Inc.)

Fix allowable F_CPU values comment in project makefiles.

3 files changed, 180 insertions, 90 deletions

diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile
index 3c79cb649..87cc5c792 100644
--- a/Bootloaders/CDC/makefile
+++ b/Bootloaders/CDC/makefile
@@ -32,6 +32,18 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

+# make dfu = Download the hex file to the device, using dfu-programmer (must

+#            have dfu-programmer installed).

+#

+# make flip = Download the hex file to the device, using Atmel FLIP (must

+#             have Atmel FLIP installed).

+#

+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

+#               (must have dfu-programmer installed).

+#

+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

+#                (must have Atmel FLIP installed).

+#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -59,28 +71,21 @@ BOARD  = USBKEY
 

 # Processor frequency.

 #     This will define a symbol, F_CPU, in all source code files equal to the 

-#     processor frequency. You can then use this symbol in your source code to 

+#     processor frequency in Hz. You can then use this symbol in your source code to 

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

 #     automatically to create a 32-bit value in your source code.

-#     Typical values are:

-#         F_CPU =  1000000

-#         F_CPU =  1843200

-#         F_CPU =  2000000

-#         F_CPU =  3686400

-#         F_CPU =  4000000

-#         F_CPU =  7372800

-#         F_CPU =  8000000

-#         F_CPU = 11059200

-#         F_CPU = 14745600

-#         F_CPU = 16000000

-#         F_CPU = 18432000

-#         F_CPU = 20000000

+#

+#     This will be an integer division of F_CLOCK below, as it is sourced by

+#     F_CLOCK after it has run through any CPU prescalers. Note that this value

+#     does not *change* the processor frequency - it should merely be updated to

+#     reflect the processor speed set externally so that the code can use accurate

+#     software delays.

 F_CPU = 8000000

 

 

 # Input clock frequency.

 #     This will define a symbol, F_CLOCK, in all source code files equal to the 

-#     input clock frequency (before any prescaling is performed). This value may

+#     input clock frequency (before any prescaling is performed) in Hz. This value may

 #     differ from F_CPU if prescaling is used on the latter, and is required as the

 #     raw input clock is fed directly to the PLL sections of the AVR for high speed

 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

@@ -319,9 +324,9 @@ EXTMEMOPTS =
 #    -Map:      create map file

 #    --cref:    add cross reference to  map file

 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)

+LDFLAGS += -Wl,--relax 

+LDFLAGS += -Wl,--gc-sections

 LDFLAGS += $(EXTMEMOPTS)

 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

@@ -458,7 +463,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 

 

 # Default target.

-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end

+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end

 

 # Change the build target to build a HEX file or a library.

 build: elf hex eep lss sym

@@ -501,14 +506,17 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

 	2>/dev/null; echo; fi

 

-showeventhooks: build

-	@echo

-	@echo -------- Unhooked LUFA Events --------

-	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \

-	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \

-			   echo "(None)"

-	@echo --------------------------------------

+$(LUFA_PATH)/LUFA/LUFA_Events.lst:

+	@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst

 

+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst

+	@echo

+	@echo Checking for invalid events...

+	@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \

+	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true

+	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp

+	@if test -s InvalidEvents.tmp; then exit 1; fi

+	

 showliboptions:

 	@echo

 	@echo ---- Compile Time Library Options ----

@@ -525,16 +533,37 @@ showtarget:
 	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master

 	@echo --------------------------------------

 	

+

 # Display compiler version information.

 gccversion : 

 	@$(CC) --version

 

 

-

 # Program the device.  

 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

+flip: $(TARGET).hex

+	batchisp -hardware usb -device $(MCU) -operation erase f

+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+

+dfu: $(TARGET).hex

+	dfu-programmer $(MCU) erase

+	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

+	dfu-programmer $(MCU) reset

+

+flip-ee: $(TARGET).hex $(TARGET).eep

+	$(COPY) $(TARGET).eep $(TARGET)eep.hex

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+	$(REMOVE) $(TARGET)eep.hex

+

+dfu-ee: $(TARGET).hex $(TARGET).eep

+	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

+	dfu-programmer $(MCU) reset

+

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -689,9 +718,9 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)

 	$(REMOVE) $(SRC:.c=.d)

 	$(REMOVE) $(SRC:.c=.i)

+	$(REMOVE) InvalidEvents.tmp

 	$(REMOVEDIR) .dep

 

-

 doxygen:

 	@echo Generating Project Documentation...

 	@doxygen Doxygen.conf

@@ -709,7 +738,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 

 

 # Listing of phony targets.

-.PHONY : all showeventhooks showliboptions showtarget  \

-begin finish end sizebefore sizeafter gccversion build \

-elf hex eep lss sym coff extcoff program clean debug   \

+.PHONY : all checkinvalidevents showliboptions    \

+showtarget begin finish end sizebefore sizeafter  \

+gccversion build elf hex eep lss sym coff extcoff \

+program dfu flip flip-ee dfu-ee clean debug       \

 clean_list clean_binary gdb-config doxygen
\ No newline at end of file
diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile
index 2f9444b34..622290ff3 100644
--- a/Bootloaders/DFU/makefile
+++ b/Bootloaders/DFU/makefile
@@ -32,6 +32,18 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

+# make dfu = Download the hex file to the device, using dfu-programmer (must

+#            have dfu-programmer installed).

+#

+# make flip = Download the hex file to the device, using Atmel FLIP (must

+#             have Atmel FLIP installed).

+#

+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

+#               (must have dfu-programmer installed).

+#

+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

+#                (must have Atmel FLIP installed).

+#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -59,28 +71,21 @@ BOARD = USBKEY
 

 # Processor frequency.

 #     This will define a symbol, F_CPU, in all source code files equal to the 

-#     processor frequency. You can then use this symbol in your source code to 

+#     processor frequency in Hz. You can then use this symbol in your source code to 

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

 #     automatically to create a 32-bit value in your source code.

-#     Typical values are:

-#         F_CPU =  1000000

-#         F_CPU =  1843200

-#         F_CPU =  2000000

-#         F_CPU =  3686400

-#         F_CPU =  4000000

-#         F_CPU =  7372800

-#         F_CPU =  8000000

-#         F_CPU = 11059200

-#         F_CPU = 14745600

-#         F_CPU = 16000000

-#         F_CPU = 18432000

-#         F_CPU = 20000000

+#

+#     This will be an integer division of F_CLOCK below, as it is sourced by

+#     F_CLOCK after it has run through any CPU prescalers. Note that this value

+#     does not *change* the processor frequency - it should merely be updated to

+#     reflect the processor speed set externally so that the code can use accurate

+#     software delays.

 F_CPU = 8000000

 

 

 # Input clock frequency.

 #     This will define a symbol, F_CLOCK, in all source code files equal to the 

-#     input clock frequency (before any prescaling is performed). This value may

+#     input clock frequency (before any prescaling is performed) in Hz. This value may

 #     differ from F_CPU if prescaling is used on the latter, and is required as the

 #     raw input clock is fed directly to the PLL sections of the AVR for high speed

 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

@@ -321,9 +326,9 @@ EXTMEMOPTS =
 #    -Map:      create map file

 #    --cref:    add cross reference to  map file

 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

-LDFLAGS += -Wl,--relax

-LDFLAGS += -Wl,--gc-sections

 LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)

+LDFLAGS += -Wl,--relax 

+LDFLAGS += -Wl,--gc-sections

 LDFLAGS += $(EXTMEMOPTS)

 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

@@ -355,7 +360,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 

 # Uncomment the following if you do /not/ wish a verification to be

 # performed after programming the device.

-AVRDUDE_NO_VERIFY = -V

+#AVRDUDE_NO_VERIFY = -V

 

 # Increase verbosity level.  Please use this when submitting bug

 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 

@@ -460,7 +465,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 

 

 # Default target.

-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end

+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end

 

 # Change the build target to build a HEX file or a library.

 build: elf hex eep lss sym

@@ -503,14 +508,17 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

 	2>/dev/null; echo; fi

 

-showeventhooks: build

-	@echo

-	@echo -------- Unhooked LUFA Events --------

-	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \

-	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \

-			   echo "(None)"

-	@echo --------------------------------------

+$(LUFA_PATH)/LUFA/LUFA_Events.lst:

+	@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst

 

+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst

+	@echo

+	@echo Checking for invalid events...

+	@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \

+	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true

+	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp

+	@if test -s InvalidEvents.tmp; then exit 1; fi

+	

 showliboptions:

 	@echo

 	@echo ---- Compile Time Library Options ----

@@ -527,16 +535,37 @@ showtarget:
 	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master

 	@echo --------------------------------------

 	

+

 # Display compiler version information.

 gccversion : 

 	@$(CC) --version

 

 

-

 # Program the device.  

 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

+flip: $(TARGET).hex

+	batchisp -hardware usb -device $(MCU) -operation erase f

+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+

+dfu: $(TARGET).hex

+	dfu-programmer $(MCU) erase

+	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

+	dfu-programmer $(MCU) reset

+

+flip-ee: $(TARGET).hex $(TARGET).eep

+	$(COPY) $(TARGET).eep $(TARGET)eep.hex

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+	$(REMOVE) $(TARGET)eep.hex

+

+dfu-ee: $(TARGET).hex $(TARGET).eep

+	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

+	dfu-programmer $(MCU) reset

+

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -691,9 +720,9 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)

 	$(REMOVE) $(SRC:.c=.d)

 	$(REMOVE) $(SRC:.c=.i)

+	$(REMOVE) InvalidEvents.tmp

 	$(REMOVEDIR) .dep

 

-

 doxygen:

 	@echo Generating Project Documentation...

 	@doxygen Doxygen.conf

@@ -711,7 +740,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 

 

 # Listing of phony targets.

-.PHONY : all showeventhooks showliboptions showtarget  \

-begin finish end sizebefore sizeafter gccversion build \

-elf hex eep lss sym coff extcoff program clean debug   \

+.PHONY : all checkinvalidevents showliboptions    \

+showtarget begin finish end sizebefore sizeafter  \

+gccversion build elf hex eep lss sym coff extcoff \

+program dfu flip flip-ee dfu-ee clean debug       \

 clean_list clean_binary gdb-config doxygen
\ No newline at end of file
diff --git a/Bootloaders/TeensyHID/makefile b/Bootloaders/TeensyHID/makefile
index e7e14e7d5..15d1d9dff 100644
--- a/Bootloaders/TeensyHID/makefile
+++ b/Bootloaders/TeensyHID/makefile
@@ -32,6 +32,18 @@
 # make program = Download the hex file to the device, using avrdude.

 #                Please customize the avrdude settings below first!

 #

+# make dfu = Download the hex file to the device, using dfu-programmer (must

+#            have dfu-programmer installed).

+#

+# make flip = Download the hex file to the device, using Atmel FLIP (must

+#             have Atmel FLIP installed).

+#

+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer

+#               (must have dfu-programmer installed).

+#

+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP

+#                (must have Atmel FLIP installed).

+#

 # make doxygen = Generate DoxyGen documentation for the project (must have

 #                DoxyGen installed)

 #

@@ -59,28 +71,21 @@ BOARD  =
 

 # Processor frequency.

 #     This will define a symbol, F_CPU, in all source code files equal to the 

-#     processor frequency. You can then use this symbol in your source code to 

+#     processor frequency in Hz. You can then use this symbol in your source code to 

 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done

 #     automatically to create a 32-bit value in your source code.

-#     Typical values are:

-#         F_CPU =  1000000

-#         F_CPU =  1843200

-#         F_CPU =  2000000

-#         F_CPU =  3686400

-#         F_CPU =  4000000

-#         F_CPU =  7372800

-#         F_CPU =  8000000

-#         F_CPU = 11059200

-#         F_CPU = 14745600

-#         F_CPU = 16000000

-#         F_CPU = 18432000

-#         F_CPU = 20000000

+#

+#     This will be an integer division of F_CLOCK below, as it is sourced by

+#     F_CLOCK after it has run through any CPU prescalers. Note that this value

+#     does not *change* the processor frequency - it should merely be updated to

+#     reflect the processor speed set externally so that the code can use accurate

+#     software delays.

 F_CPU = 16000000

 

 

 # Input clock frequency.

 #     This will define a symbol, F_CLOCK, in all source code files equal to the 

-#     input clock frequency (before any prescaling is performed). This value may

+#     input clock frequency (before any prescaling is performed) in Hz. This value may

 #     differ from F_CPU if prescaling is used on the latter, and is required as the

 #     raw input clock is fed directly to the PLL sections of the AVR for high speed

 #     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'

@@ -320,9 +325,9 @@ EXTMEMOPTS =
 #    -Map:      create map file

 #    --cref:    add cross reference to  map file

 LDFLAGS = -Wl,-Map=$(TARGET).map,--cref

+LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)

 LDFLAGS += -Wl,--relax 

 LDFLAGS += -Wl,--gc-sections

-LDFLAGS += -Wl,--section-start=.text=$(BOOT_START)

 LDFLAGS += $(EXTMEMOPTS)

 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))

 LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)

@@ -459,7 +464,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 

 

 # Default target.

-all: begin gccversion sizebefore build showeventhooks showliboptions showtarget sizeafter end

+all: begin gccversion sizebefore build checkinvalidevents showliboptions showtarget sizeafter end

 

 # Change the build target to build a HEX file or a library.

 build: elf hex eep lss sym

@@ -502,14 +507,17 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \

 	2>/dev/null; echo; fi

 

-showeventhooks: build

-	@echo

-	@echo -------- Unhooked LUFA Events --------

-	@$(shell) (grep -s '^EVENT_.*LUFA/.*\\.o' $(TARGET).map | \

-	           cut -d' ' -f1 | cut -d'_' -f2- | grep ".*") || \

-			   echo "(None)"

-	@echo --------------------------------------

+$(LUFA_PATH)/LUFA/LUFA_Events.lst:

+	@make -C $(LUFA_PATH)/LUFA/ LUFA_Events.lst

 

+checkinvalidevents: $(LUFA_PATH)/LUFA/LUFA_Events.lst

+	@echo

+	@echo Checking for invalid events...

+	@$(shell) avr-nm $(TARGET).elf | sed -n -e 's/^.*EVENT_/EVENT_/p' | \

+	                 grep -F -v --file=$(LUFA_PATH)/LUFA/LUFA_Events.lst > InvalidEvents.tmp || true

+	@sed -n -e 's/^/  WARNING - INVALID EVENT NAME: /p' InvalidEvents.tmp

+	@if test -s InvalidEvents.tmp; then exit 1; fi

+	

 showliboptions:

 	@echo

 	@echo ---- Compile Time Library Options ----

@@ -526,16 +534,37 @@ showtarget:
 	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master

 	@echo --------------------------------------

 	

+

 # Display compiler version information.

 gccversion : 

 	@$(CC) --version

 

 

-

 # Program the device.  

 program: $(TARGET).hex $(TARGET).eep

 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)

 

+flip: $(TARGET).hex

+	batchisp -hardware usb -device $(MCU) -operation erase f

+	batchisp -hardware usb -device $(MCU) -operation loadbuffer $(TARGET).hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+

+dfu: $(TARGET).hex

+	dfu-programmer $(MCU) erase

+	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex

+	dfu-programmer $(MCU) reset

+

+flip-ee: $(TARGET).hex $(TARGET).eep

+	$(COPY) $(TARGET).eep $(TARGET)eep.hex

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM erase

+	batchisp -hardware usb -device $(MCU) -operation memory EEPROM loadbuffer $(TARGET)eep.hex program

+	batchisp -hardware usb -device $(MCU) -operation start reset 0

+	$(REMOVE) $(TARGET)eep.hex

+

+dfu-ee: $(TARGET).hex $(TARGET).eep

+	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep

+	dfu-programmer $(MCU) reset

+

 

 # Generate avr-gdb config/init file which does the following:

 #     define the reset signal, load the target file, connect to target, and set 

@@ -690,9 +719,9 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)

 	$(REMOVE) $(SRC:.c=.d)

 	$(REMOVE) $(SRC:.c=.i)

+	$(REMOVE) InvalidEvents.tmp

 	$(REMOVEDIR) .dep

 

-

 doxygen:

 	@echo Generating Project Documentation...

 	@doxygen Doxygen.conf

@@ -710,7 +739,8 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 

 

 # Listing of phony targets.

-.PHONY : all showeventhooks showliboptions showtarget  \

-begin finish end sizebefore sizeafter gccversion build \

-elf hex eep lss sym coff extcoff program clean debug   \

+.PHONY : all checkinvalidevents showliboptions    \

+showtarget begin finish end sizebefore sizeafter  \

+gccversion build elf hex eep lss sym coff extcoff \

+program dfu flip flip-ee dfu-ee clean debug       \

 clean_list clean_binary gdb-config doxygen
\ No newline at end of file