diff options
Diffstat (limited to 'Projects')
| -rw-r--r-- | Projects/AVRISP-MKII/AVRISP-MKII.c | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c index 82325e55e..6d4bc89ae 100644 --- a/Projects/AVRISP-MKII/AVRISP-MKII.c +++ b/Projects/AVRISP-MKII/AVRISP-MKII.c @@ -36,6 +36,16 @@ #include "AVRISP-MKII.h" +#if (BOARD != BOARD_NONE) + /* Some board hardware definitions (e.g. the Arduino Micro) have their LEDs defined on the same pins + as the ISP, PDI or TPI interfaces (see the accompanying project documentation). If a board other + than NONE is selected (to enable the LED driver with the programmer) you should double-check that + no conflicts will occur. If there is a conflict, turn off the LEDs (set BOARD to NONE in the makefile) + or define a custom board driver (see the LUFA manual) with alternative LED mappings. + */ + #warning Board specific drivers have been selected; make sure the board LED driver does not conflict with the programmer ISP/PDI/TPI interfaces. +#endif + /** Main program entry point. This routine contains the overall program flow, including initial * setup of all components and the main program loop. */ |