aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/TempDataLogger/TemperatureDataLogger.txt
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/TempDataLogger/TemperatureDataLogger.txt')
-rw-r--r--Projects/TempDataLogger/TemperatureDataLogger.txt10
1 files changed, 5 insertions, 5 deletions
diff --git a/Projects/TempDataLogger/TemperatureDataLogger.txt b/Projects/TempDataLogger/TemperatureDataLogger.txt
index 41fb2c320..01a080d87 100644
--- a/Projects/TempDataLogger/TemperatureDataLogger.txt
+++ b/Projects/TempDataLogger/TemperatureDataLogger.txt
@@ -6,7 +6,7 @@
/** \mainpage Temperature Datalogger Project
*
- * \section SSec_Compat Demo Compatibility:
+ * \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
@@ -14,7 +14,7 @@
* - Series 6 USB AVRs (AT90USBxxx6)
* - Series 4 USB AVRs (ATMEGAxxU4) - <i>those with >16KB of FLASH memory only</i>
*
- * \section SSec_Info USB Information:
+ * \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
@@ -47,7 +47,7 @@
* </tr>
* </table>
*
- * \section SSec_Description Project Description:
+ * \section Sec_Description Project Description:
*
* Temperature Data Logger project. This project is a very basic USB data logger for the current temperature as reported by
* the board's temperature sensor, writing the temperature to a file stored on the board's Dataflash in a FAT filesystem
@@ -57,7 +57,7 @@
*
* A DS1307 or compatible RTC IC is designed to be attached to the AVR's TWI bus, for the management of timestamps on the
* sampled data. This project will not function correctly if the RTC chip is omitted unless the DUMMY_RTC compile time token
- * is specified - see \ref SSec_Options.
+ * is specified - see \ref Sec_Options.
*
* Due to the host's need for exclusive access to the file system, the device will not log samples while connected to a host.
* For the logger to store data, the Dataflash must first be formatted by the host so that it contains a valid FAT file system.
@@ -65,7 +65,7 @@
* This project uses the FatFS library from ELM Chan (http://elm-chan.org/fsw/ff/00index_e.html) and the .NET HID device library
* LibHIDNet (http://sourceforge.net/projects/libhidnet/).
*
- * \section SSec_Options Project Options
+ * \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*