diff options
Diffstat (limited to 'Projects/AVRISP/Lib/XPROG/TPITarget.c')
-rw-r--r-- | Projects/AVRISP/Lib/XPROG/TPITarget.c | 338 |
1 files changed, 338 insertions, 0 deletions
diff --git a/Projects/AVRISP/Lib/XPROG/TPITarget.c b/Projects/AVRISP/Lib/XPROG/TPITarget.c new file mode 100644 index 000000000..f7943bfa1 --- /dev/null +++ b/Projects/AVRISP/Lib/XPROG/TPITarget.c @@ -0,0 +1,338 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * Target-related functions for the TPI Protocol decoder.
+ */
+
+#define INCLUDE_FROM_TPITARGET_C
+#include "TPITarget.h"
+
+#if defined(ENABLE_TPI_PROTOCOL) || defined(__DOXYGEN__)
+
+/** Flag to indicate if the USART is currently in Tx or Rx mode. */
+volatile bool IsSending;
+
+#if !defined(TPI_VIA_HARDWARE_USART)
+/** Software USART raw frame bits for transmission/reception. */
+volatile uint16_t SoftUSART_Data;
+
+/** Bits remaining to be sent or received via the software USART - set as a GPIOR for speed. */
+#define SoftUSART_BitCount GPIOR2
+
+
+/** ISR to manage the software USART when bit-banged USART mode is selected. */
+ISR(TIMER1_CAPT_vect, ISR_BLOCK)
+{
+ /* Toggle CLOCK pin in a single cycle (see AVR datasheet) */
+ BITBANG_TPICLOCK_PIN |= BITBANG_TPICLOCK_MASK;
+
+ /* If not sending or receiving, just exit */
+ if (!(SoftUSART_BitCount))
+ return;
+
+ /* Check to see if we are at a rising or falling edge of the clock */
+ if (BITBANG_TPICLOCK_PORT & BITBANG_TPICLOCK_MASK)
+ {
+ /* If at rising clock edge and we are in send mode, abort */
+ if (IsSending)
+ return;
+
+ /* Wait for the start bit when receiving */
+ if ((SoftUSART_BitCount == BITS_IN_TPI_FRAME) && (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK))
+ return;
+
+ /* Shift in the bit one less than the frame size in position, so that the start bit will eventually
+ * be discarded leaving the data to be byte-aligned for quick access */
+ if (BITBANG_TPIDATA_PIN & BITBANG_TPIDATA_MASK)
+ SoftUSART_Data |= (1 << (BITS_IN_TPI_FRAME - 1));
+
+ SoftUSART_Data >>= 1;
+ SoftUSART_BitCount--;
+ }
+ else
+ {
+ /* If at falling clock edge and we are in receive mode, abort */
+ if (!IsSending)
+ return;
+
+ /* Set the data line to the next bit value */
+ if (SoftUSART_Data & 0x01)
+ BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
+ else
+ BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
+
+ SoftUSART_Data >>= 1;
+ SoftUSART_BitCount--;
+ }
+}
+#endif
+
+/** Enables the target's TPI interface, holding the target in reset until TPI mode is exited. */
+void TPITarget_EnableTargetTPI(void)
+{
+ /* Set /RESET line low for at least 90ns to enable TPI functionality */
+ RESET_LINE_DDR |= RESET_LINE_MASK;
+ RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ asm volatile ("NOP"::);
+ asm volatile ("NOP"::);
+
+#if defined(TPI_VIA_HARDWARE_USART)
+ /* Set Tx and XCK as outputs, Rx as input */
+ DDRD |= (1 << 5) | (1 << 3);
+ DDRD &= ~(1 << 2);
+
+ /* Set up the synchronous USART for XMEGA communications -
+ 8 data bits, even parity, 2 stop bits */
+ UBRR1 = (F_CPU / 1000000UL);
+ UCSR1B = (1 << TXEN1);
+ UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
+
+ /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+ TPITarget_SendBreak();
+ TPITarget_SendBreak();
+#else
+ /* Set DATA and CLOCK lines to outputs */
+ BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
+ BITBANG_TPICLOCK_DDR |= BITBANG_TPICLOCK_MASK;
+
+ /* Set DATA line high for idle state */
+ BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
+
+ /* Fire timer capture ISR every 100 cycles to manage the software USART */
+ OCR1A = 80;
+ TCCR1B = (1 << WGM13) | (1 << WGM12) | (1 << CS10);
+ TIMSK1 = (1 << ICIE1);
+
+ /* Send two BREAKs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
+ TPITarget_SendBreak();
+ TPITarget_SendBreak();
+#endif
+}
+
+/** Disables the target's TPI interface, exits programming mode and starts the target's application. */
+void TPITarget_DisableTargetTPI(void)
+{
+#if defined(TPI_VIA_HARDWARE_USART)
+ /* Turn off receiver and transmitter of the USART, clear settings */
+ UCSR1A |= (1 << TXC1) | (1 << RXC1);
+ UCSR1B = 0;
+ UCSR1C = 0;
+
+ /* Set all USART lines as input, tristate */
+ DDRD &= ~((1 << 5) | (1 << 3));
+ PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
+#else
+ /* Set DATA and CLOCK lines to inputs */
+ BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
+ BITBANG_TPICLOCK_DDR &= ~BITBANG_TPICLOCK_MASK;
+
+ /* Tristate DATA and CLOCK lines */
+ BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
+ BITBANG_TPICLOCK_PORT &= ~BITBANG_TPICLOCK_MASK;
+#endif
+
+ /* Tristate target /RESET line */
+ RESET_LINE_DDR &= ~RESET_LINE_MASK;
+ RESET_LINE_PORT &= ~RESET_LINE_MASK;
+}
+
+/** Sends a byte via the USART.
+ *
+ * \param[in] Byte Byte to send through the USART
+ */
+void TPITarget_SendByte(const uint8_t Byte)
+{
+#if defined(TPI_VIA_HARDWARE_USART)
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ PORTD |= (1 << 3);
+ DDRD |= (1 << 3);
+
+ UCSR1B |= (1 << TXEN1);
+ UCSR1B &= ~(1 << RXEN1);
+
+ IsSending = true;
+ }
+
+ /* Wait until there is space in the hardware Tx buffer before writing */
+ while (!(UCSR1A & (1 << UDRE1)));
+ UCSR1A |= (1 << TXC1);
+ UDR1 = Byte;
+#else
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
+ BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
+
+ IsSending = true;
+ }
+
+ /* Calculate the new USART frame data here while while we wait for a previous byte (if any) to finish sending */
+ uint16_t NewUSARTData = ((1 << 11) | (1 << 10) | (0 << 9) | ((uint16_t)Byte << 1) | (0 << 0));
+
+ /* Compute Even parity - while a bit is still set, chop off lowest bit and toggle parity bit */
+ uint8_t ParityData = Byte;
+ while (ParityData)
+ {
+ NewUSARTData ^= (1 << 9);
+ ParityData &= (ParityData - 1);
+ }
+
+ /* Wait until transmitter is idle before writing new data */
+ while (SoftUSART_BitCount);
+
+ /* Data shifted out LSB first, START DATA PARITY STOP STOP */
+ SoftUSART_Data = NewUSARTData;
+ SoftUSART_BitCount = BITS_IN_TPI_FRAME;
+#endif
+}
+
+/** Receives a byte via the software USART, blocking until data is received.
+ *
+ * \return Received byte from the USART
+ */
+uint8_t TPITarget_ReceiveByte(void)
+{
+#if defined(TPI_VIA_HARDWARE_USART)
+ /* Switch to Rx mode if currently in Tx mode */
+ if (IsSending)
+ {
+ while (!(UCSR1A & (1 << TXC1)));
+ UCSR1A |= (1 << TXC1);
+
+ UCSR1B &= ~(1 << TXEN1);
+ UCSR1B |= (1 << RXEN1);
+
+ DDRD &= ~(1 << 3);
+ PORTD &= ~(1 << 3);
+
+ IsSending = false;
+ }
+
+ /* Wait until a byte has been received before reading */
+ while (!(UCSR1A & (1 << RXC1)));
+ return UDR1;
+#else
+ /* Switch to Rx mode if currently in Tx mode */
+ if (IsSending)
+ {
+ while (SoftUSART_BitCount);
+
+ BITBANG_TPIDATA_DDR &= ~BITBANG_TPIDATA_MASK;
+ BITBANG_TPIDATA_PORT &= ~BITBANG_TPIDATA_MASK;
+
+ IsSending = false;
+ }
+
+ /* Wait until a byte has been received before reading */
+ SoftUSART_BitCount = BITS_IN_TPI_FRAME;
+ while (SoftUSART_BitCount);
+
+ /* Throw away the parity and stop bits to leave only the data (start bit is already discarded) */
+ return (uint8_t)SoftUSART_Data;
+#endif
+}
+
+/** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
+void TPITarget_SendBreak(void)
+{
+#if defined(TPI_VIA_HARDWARE_USART)
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ PORTD |= (1 << 3);
+ DDRD |= (1 << 3);
+
+ UCSR1B &= ~(1 << RXEN1);
+ UCSR1B |= (1 << TXEN1);
+
+ IsSending = true;
+ }
+
+ /* Need to do nothing for a full frame to send a BREAK */
+ for (uint8_t i = 0; i < BITS_IN_TPI_FRAME; i++)
+ {
+ /* Wait for a full cycle of the clock */
+ while (PIND & (1 << 5));
+ while (!(PIND & (1 << 5)));
+ }
+#else
+ /* Switch to Tx mode if currently in Rx mode */
+ if (!(IsSending))
+ {
+ BITBANG_TPIDATA_PORT |= BITBANG_TPIDATA_MASK;
+ BITBANG_TPIDATA_DDR |= BITBANG_TPIDATA_MASK;
+
+ IsSending = true;
+ }
+
+ while (SoftUSART_BitCount);
+
+ /* Need to do nothing for a full frame to send a BREAK */
+ SoftUSART_Data = 0x0FFF;
+ SoftUSART_BitCount = BITS_IN_TPI_FRAME;
+#endif
+}
+
+/** Busy-waits while the NVM controller is busy performing a NVM operation, such as a FLASH page read or CRC
+ * calculation.
+ *
+ * \return Boolean true if the NVM controller became ready within the timeout period, false otherwise
+ */
+bool TPITarget_WaitWhileNVMBusBusy(void)
+{
+ TCNT0 = 0;
+ TIFR0 = (1 << OCF1A);
+
+ uint8_t TimeoutMS = TPI_NVM_TIMEOUT_MS;
+
+ /* Poll the STATUS register to check to see if NVM access has been enabled */
+ while (TimeoutMS)
+ {
+ /* Send the SLDCS command to read the TPI STATUS register to see the NVM bus is active */
+ TPITarget_SendByte(TPI_CMD_SLDCS | TPI_STATUS_REG);
+ if (TPITarget_ReceiveByte() & TPI_STATUS_NVM)
+ return true;
+
+ if (TIFR0 & (1 << OCF1A))
+ {
+ TIFR0 = (1 << OCF1A);
+ TimeoutMS--;
+ }
+ }
+
+ return false;
+}
+
+#endif
|