diff options
Diffstat (limited to 'Projects/AVRISP/Lib/XPROG/TPITarget.c')
| -rw-r--r-- | Projects/AVRISP/Lib/XPROG/TPITarget.c | 14 |
1 files changed, 7 insertions, 7 deletions
diff --git a/Projects/AVRISP/Lib/XPROG/TPITarget.c b/Projects/AVRISP/Lib/XPROG/TPITarget.c index f7943bfa1..441f5526a 100644 --- a/Projects/AVRISP/Lib/XPROG/TPITarget.c +++ b/Projects/AVRISP/Lib/XPROG/TPITarget.c @@ -36,12 +36,12 @@ #define INCLUDE_FROM_TPITARGET_C
#include "TPITarget.h"
-#if defined(ENABLE_TPI_PROTOCOL) || defined(__DOXYGEN__)
+#if defined(ENABLE_XPROG_PROTOCOL) || defined(__DOXYGEN__)
/** Flag to indicate if the USART is currently in Tx or Rx mode. */
volatile bool IsSending;
-#if !defined(TPI_VIA_HARDWARE_USART)
+#if !defined(XPROG_VIA_HARDWARE_USART)
/** Software USART raw frame bits for transmission/reception. */
volatile uint16_t SoftUSART_Data;
@@ -105,7 +105,7 @@ void TPITarget_EnableTargetTPI(void) asm volatile ("NOP"::);
asm volatile ("NOP"::);
-#if defined(TPI_VIA_HARDWARE_USART)
+#if defined(XPROG_VIA_HARDWARE_USART)
/* Set Tx and XCK as outputs, Rx as input */
DDRD |= (1 << 5) | (1 << 3);
DDRD &= ~(1 << 2);
@@ -141,7 +141,7 @@ void TPITarget_EnableTargetTPI(void) /** Disables the target's TPI interface, exits programming mode and starts the target's application. */
void TPITarget_DisableTargetTPI(void)
{
-#if defined(TPI_VIA_HARDWARE_USART)
+#if defined(XPROG_VIA_HARDWARE_USART)
/* Turn off receiver and transmitter of the USART, clear settings */
UCSR1A |= (1 << TXC1) | (1 << RXC1);
UCSR1B = 0;
@@ -171,7 +171,7 @@ void TPITarget_DisableTargetTPI(void) */
void TPITarget_SendByte(const uint8_t Byte)
{
-#if defined(TPI_VIA_HARDWARE_USART)
+#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
@@ -224,7 +224,7 @@ void TPITarget_SendByte(const uint8_t Byte) */
uint8_t TPITarget_ReceiveByte(void)
{
-#if defined(TPI_VIA_HARDWARE_USART)
+#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Rx mode if currently in Tx mode */
if (IsSending)
{
@@ -267,7 +267,7 @@ uint8_t TPITarget_ReceiveByte(void) /** Sends a BREAK via the USART to the attached target, consisting of a full frame of idle bits. */
void TPITarget_SendBreak(void)
{
-#if defined(TPI_VIA_HARDWARE_USART)
+#if defined(XPROG_VIA_HARDWARE_USART)
/* Switch to Tx mode if currently in Rx mode */
if (!(IsSending))
{
|