diff options
Diffstat (limited to 'Projects/AVRISP/Lib/XPROG/PDIProtocol.c')
-rw-r--r-- | Projects/AVRISP/Lib/XPROG/PDIProtocol.c | 378 |
1 files changed, 378 insertions, 0 deletions
diff --git a/Projects/AVRISP/Lib/XPROG/PDIProtocol.c b/Projects/AVRISP/Lib/XPROG/PDIProtocol.c new file mode 100644 index 000000000..ed5146063 --- /dev/null +++ b/Projects/AVRISP/Lib/XPROG/PDIProtocol.c @@ -0,0 +1,378 @@ +/*
+ LUFA Library
+ Copyright (C) Dean Camera, 2009.
+
+ dean [at] fourwalledcubicle [dot] com
+ www.fourwalledcubicle.com
+*/
+
+/*
+ Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+ Permission to use, copy, modify, and distribute this software
+ and its documentation for any purpose and without fee is hereby
+ granted, provided that the above copyright notice appear in all
+ copies and that both that the copyright notice and this
+ permission notice and warranty disclaimer appear in supporting
+ documentation, and that the name of the author not be used in
+ advertising or publicity pertaining to distribution of the
+ software without specific, written prior permission.
+
+ The author disclaim all warranties with regard to this
+ software, including all implied warranties of merchantability
+ and fitness. In no event shall the author be liable for any
+ special, indirect or consequential damages or any damages
+ whatsoever resulting from loss of use, data or profits, whether
+ in an action of contract, negligence or other tortious action,
+ arising out of or in connection with the use or performance of
+ this software.
+*/
+
+/** \file
+ *
+ * PDI Protocol handler, to process V2 Protocol wrapped PDI commands used in Atmel programmer devices.
+ */
+
+#define INCLUDE_FROM_PDIPROTOCOL_C
+#include "PDIProtocol.h"
+
+#if defined(ENABLE_PDI_PROTOCOL) || defined(__DOXYGEN__)
+/** Base absolute address for the target's NVM controller */
+uint32_t XPROG_Param_NVMBase = 0x010001C0;
+
+/** Size in bytes of the target's EEPROM page */
+uint32_t XPROG_Param_EEPageSize;
+
+/** Handler for the CMD_XPROG_SETMODE command, which sets the programmer-to-target protocol used for PDI
+ * XMEGA programming (either PDI or JTAG). Only PDI programming is supported.
+ */
+void PDIProtocol_XPROG_SetMode(void)
+{
+ struct
+ {
+ uint8_t Protocol;
+ } SetMode_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params));
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Serial_TxByte(SetMode_XPROG_Params.Protocol);
+
+ Endpoint_Write_Byte(CMD_XPROG_SETMODE);
+ Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol == XPRG_PROTOCOL_PDI) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
+ * removed and processed so that the underlying XPROG command can be handled.
+ */
+void PDIProtocol_XPROG_Command(void)
+{
+ uint8_t XPROGCommand = Endpoint_Read_Byte();
+
+ switch (XPROGCommand)
+ {
+ case XPRG_CMD_ENTER_PROGMODE:
+ PDIProtocol_EnterXPROGMode();
+ break;
+ case XPRG_CMD_LEAVE_PROGMODE:
+ PDIProtocol_LeaveXPROGMode();
+ break;
+ case XPRG_CMD_ERASE:
+ PDIProtocol_Erase();
+ break;
+ case XPRG_CMD_WRITE_MEM:
+ PDIProtocol_WriteMemory();
+ break;
+ case XPRG_CMD_READ_MEM:
+ PDIProtocol_ReadMemory();
+ break;
+ case XPRG_CMD_CRC:
+ PDIProtocol_ReadCRC();
+ break;
+ case XPRG_CMD_SET_PARAM:
+ PDIProtocol_SetParam();
+ break;
+ }
+}
+
+/** Handler for the XPROG ENTER_PROGMODE command to establish a PDI connection with the attached device. */
+static void PDIProtocol_EnterXPROGMode(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ /* Enable PDI programming mode with the attached target */
+ PDITarget_EnableTargetPDI();
+
+ /* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
+ PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
+ PDITarget_SendByte(PDI_RESET_KEY);
+
+ /* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
+ PDITarget_SendByte(PDI_CMD_KEY);
+ for (uint8_t i = sizeof(PDI_NVMENABLE_KEY); i > 0; i--)
+ PDITarget_SendByte(PDI_NVMENABLE_KEY[i - 1]);
+
+ /* Wait until the NVM bus becomes active */
+ bool NVMBusEnabled = PDITarget_WaitWhileNVMBusBusy();
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
+ Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG LEAVE_PROGMODE command to terminate the PDI programming connection with
+ * the attached device.
+ */
+static void PDIProtocol_LeaveXPROGMode(void)
+{
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ /* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
+ PDITarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
+ PDITarget_SendByte(0x00);
+
+ PDITarget_DisableTargetPDI();
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
+ Endpoint_Write_Byte(XPRG_ERR_OK);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPRG ERASE command to erase a specific memory address space in the attached device. */
+static void PDIProtocol_Erase(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ } Erase_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params));
+ Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint8_t EraseCommand = XMEGA_NVM_CMD_NOOP;
+
+ /* Determine which NVM command to send to the device depending on the memory to erase */
+ if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_CHIP)
+ EraseCommand = XMEGA_NVM_CMD_CHIPERASE;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP)
+ EraseCommand = XMEGA_NVM_CMD_ERASEAPPSEC;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT)
+ EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSEC;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM)
+ EraseCommand = XMEGA_NVM_CMD_ERASEEEPROM;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_APP_PAGE)
+ EraseCommand = XMEGA_NVM_CMD_ERASEAPPSECPAGE;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_BOOT_PAGE)
+ EraseCommand = XMEGA_NVM_CMD_ERASEBOOTSECPAGE;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_EEPROM_PAGE)
+ EraseCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGE;
+ else if (Erase_XPROG_Params.MemoryType == XPRG_ERASE_USERSIG)
+ EraseCommand = XMEGA_NVM_CMD_ERASEUSERSIG;
+
+ /* Erase the target memory, indicate timeout if ocurred */
+ if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_ERASE);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
+static void PDIProtocol_WriteMemory(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint8_t PageMode;
+ uint32_t Address;
+ uint16_t Length;
+ uint8_t ProgData[256];
+ } WriteMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
+ sizeof(WriteMemory_XPROG_Params).ProgData));
+ WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
+ WriteMemory_XPROG_Params.Length = SwapEndian_16(WriteMemory_XPROG_Params.Length);
+ Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length);
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ /* Assume FLASH page programming by default, as it is the common case */
+ uint8_t WriteCommand = XMEGA_NVM_CMD_WRITEFLASHPAGE;
+ uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
+ uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
+ bool PagedMemory = true;
+
+ if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_APPL)
+ {
+ WriteCommand = XMEGA_NVM_CMD_WRITEAPPSECPAGE;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_BOOT)
+ {
+ WriteCommand = XMEGA_NVM_CMD_WRITEBOOTSECPAGE;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_EEPROM)
+ {
+ WriteCommand = XMEGA_NVM_CMD_WRITEEEPROMPAGE;
+ WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
+ EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_USERSIG)
+ {
+ /* User signature is paged, but needs us to manually indicate the mode bits since the host doesn't set them */
+ WriteMemory_XPROG_Params.PageMode = (XPRG_PAGEMODE_ERASE | XPRG_PAGEMODE_WRITE);
+ WriteCommand = XMEGA_NVM_CMD_WRITEUSERSIG;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_FUSE)
+ {
+ WriteCommand = XMEGA_NVM_CMD_WRITEFUSE;
+ PagedMemory = false;
+ }
+ else if (WriteMemory_XPROG_Params.MemoryType == XPRG_MEM_TYPE_LOCKBITS)
+ {
+ WriteCommand = XMEGA_NVM_CMD_WRITELOCK;
+ PagedMemory = false;
+ }
+
+ /* Send the appropriate memory write commands to the device, indicate timeout if occurred */
+ if ((PagedMemory && !XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
+ WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length)) ||
+ (!PagedMemory && !XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
+ WriteMemory_XPROG_Params.ProgData)))
+ {
+ ReturnStatus = XPRG_ERR_TIMEOUT;
+ }
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG READ_MEMORY command to read data from a specific address space within the
+ * attached device.
+ */
+static void PDIProtocol_ReadMemory(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t MemoryType;
+ uint32_t Address;
+ uint16_t Length;
+ } ReadMemory_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params));
+ ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
+ ReadMemory_XPROG_Params.Length = SwapEndian_16(ReadMemory_XPROG_Params.Length);
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint8_t ReadBuffer[256];
+
+ /* Read the target's memory, indicate timeout if occurred */
+ if (!(XMEGANVM_ReadMemory(ReadMemory_XPROG_Params.Address, ReadBuffer, ReadMemory_XPROG_Params.Length)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
+ Endpoint_Write_Byte(ReturnStatus);
+
+ if (ReturnStatus == XPRG_ERR_OK)
+ Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length);
+
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG CRC command to read a specific memory space's CRC value for comparison between the
+ * attached device's memory and a data set on the host.
+ */
+static void PDIProtocol_ReadCRC(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ struct
+ {
+ uint8_t CRCType;
+ } ReadCRC_XPROG_Params;
+
+ Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params));
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ uint8_t CRCCommand = XMEGA_NVM_CMD_NOOP;
+ uint32_t MemoryCRC;
+
+ /* Determine which NVM command to send to the device depending on the memory to CRC */
+ if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_APP)
+ CRCCommand = XMEGA_NVM_CMD_APPCRC;
+ else if (ReadCRC_XPROG_Params.CRCType == XPRG_CRC_BOOT)
+ CRCCommand = XMEGA_NVM_CMD_BOOTCRC;
+ else
+ CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
+
+ /* Perform and retrieve the memory CRC, indicate timeout if occurred */
+ if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
+ ReturnStatus = XPRG_ERR_TIMEOUT;
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_CRC);
+ Endpoint_Write_Byte(ReturnStatus);
+
+ if (ReturnStatus == XPRG_ERR_OK)
+ {
+ Endpoint_Write_Byte(MemoryCRC >> 16);
+ Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
+ }
+
+ Endpoint_ClearIN();
+}
+
+/** Handler for the XPROG SET_PARAM command to set a PDI parameter for use when communicating with the
+ * attached device.
+ */
+static void PDIProtocol_SetParam(void)
+{
+ uint8_t ReturnStatus = XPRG_ERR_OK;
+
+ uint8_t XPROGParam = Endpoint_Read_Byte();
+
+ /* Determine which parameter is being set, store the new parameter value */
+ if (XPROGParam == XPRG_PARAM_NVMBASE)
+ XPROG_Param_NVMBase = Endpoint_Read_DWord_BE();
+ else if (XPROGParam == XPRG_PARAM_EEPPAGESIZE)
+ XPROG_Param_EEPageSize = Endpoint_Read_Word_BE();
+ else
+ ReturnStatus = XPRG_ERR_FAILED;
+
+ Endpoint_ClearOUT();
+ Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
+
+ Endpoint_Write_Byte(CMD_XPROG);
+ Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
+ Endpoint_Write_Byte(ReturnStatus);
+ Endpoint_ClearIN();
+}
+
+#endif
|