1 files changed, 92 insertions, 0 deletions
diff --git a/Projects/AVRISP/AVRISP.txt b/Projects/AVRISP/AVRISP.txt
new file mode 100644
index 000000000..e26cfb11e
--- /dev/null
+++ b/Projects/AVRISP/AVRISP.txt
@@ -0,0 +1,92 @@
+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \mainpage AVRISP MKII Programmer Project
+ *
+ *  \section SSec_Compat Demo Compatibility:
+ *
+ *  The following table indicates what microcontrollers are compatible with this demo.
+ *
+ *  - AT90USB1287
+ *  - AT90USB1286
+ *  - AT90USB647
+ *  - AT90USB646
+ *  - ATMEGA32U6
+ *  - ATMEGA32U4
+ *  - ATMEGA16U4
+ *  - AT90USB162
+ *  - AT90USB82
+ *
+ *  \section SSec_Info USB Information:
+ *
+ *  The following table gives a rundown of the USB utilization of this demo.
+ *
+ * <table>
+ *  <tr>
+ *   <td><b>USB Mode:</b></td>
+ *   <td>Device</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>USB Class:</b></td>
+ *   <td>Vendor Specific Class</td>
+ *  </tr>
+ *  <tr> 
+ *   <td><b>USB Subclass:</b></td>
+ *   <td>N/A</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>Relevant Standards:</b></td>
+ *   <td>Atmel AVRISP MKII Protocol Specification</td>
+ *  </tr>
+ *  <tr>
+ *   <td><b>Usable Speeds:</b></td>
+ *   <td>Full Speed Mode</td>
+ *  </tr>
+ * </table>
+ *
+ *  \section SSec_Description Project Description: 
+ *
+ *  Firmware for an AVRStudio compatible AVRISP-MKII clone programmer. This project will enable the USB AVR series of
+ *  microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio. In its
+ *  most basic form, it allows for the programming of 5V AVRs from within AVRStudio with no special hardware other than
+ *  the USB AVR and the parts needed for the USB interface. If the user desires, more advanced circuits incorporating
+ *  level conversion can be made to allow for the programming of 3.3V AVR designs.
+ *
+ *  This device spoofs Atmel's official AVRISP-MKII device PID so that it remains compatible with Atmel's AVRISP-MKII
+ *  drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.
+ *
+ *  Note that this design currently has several limitations:
+ *    - Minimum target clock speed of 500KHz due to hardware SPI used
+ *    - No VTARGET detection and notification
+ *    - No reversed/shorted target connector detection and notification
+ *
+ *  \section SSec_Options Project Options
+ *
+ *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
+ *
+ *  <table>
+ *   <tr>
+ *    <td><b>Define Name:</b></td>
+ *    <td><b>Location:</b></td>
+ *    <td><b>Description:</b></td>
+ *   </tr>
+ *   <tr>
+ *    <td>RESET_LINE_PORT</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>PORT register for the programmer's target RESET line.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>RESET_LINE_DDR</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>DDR register for the programmer's target RESET line.</td>
+ *   </tr>
+ *   <tr>
+ *    <td>RESET_LINE_MASK</td>
+ *    <td>Makefile CDEFS</td>
+ *    <td>Mask for the programmer's target RESET line on the chosen port.</td>
+ *   </tr>
+ *  </table>
+ */