aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/AVRISP-MKII
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/AVRISP-MKII')
-rw-r--r--Projects/AVRISP-MKII/AVRISP.txt34
-rw-r--r--Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c10
-rw-r--r--Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c8
-rw-r--r--Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h8
-rw-r--r--Projects/AVRISP-MKII/makefile8
5 files changed, 36 insertions, 32 deletions
diff --git a/Projects/AVRISP-MKII/AVRISP.txt b/Projects/AVRISP-MKII/AVRISP.txt
index 8ea8c8dac..9bed59e56 100644
--- a/Projects/AVRISP-MKII/AVRISP.txt
+++ b/Projects/AVRISP-MKII/AVRISP.txt
@@ -109,7 +109,7 @@
* </table>
*
* <b><sup>1</sup></b> <i>Optional, see \ref SSec_Options section - for USB AVRs with ADC modules only</i> \n
- * <b><sup>2</sup></b> <i>See \ref SSec_Options section</i>
+ * <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
*
* \section Sec_PDI PDI Connections
* Connections to the device for PDI programming<b><sup>1</sup></b> (when enabled):
@@ -153,7 +153,8 @@
* </table>
*
* <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
- * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
+ * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n
+ * <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
*
* \section Sec_TPI TPI Connections
* Connections to the device for TPI programming<b><sup>1</sup></b> (when enabled):
@@ -197,7 +198,8 @@
* </table>
*
* <b><sup>1</sup></b> <i>When XPROG_VIA_HARDWARE_USART is set, the AVR's Tx and Rx become the DATA line when connected together
- * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i>
+ * via a pair of 300 ohm resistors, and the AVR's XCK pin becomes CLOCK.</i> \n
+ * <b><sup>2</sup></b> <i>See AUX line related tokens in the \ref SSec_Options section</i>
*
* \section SSec_Options Project Options
*
@@ -210,27 +212,29 @@
* <td><b>Description:</b></td>
* </tr>
* <tr>
- * <td>RESET_LINE_PORT</td>
+ * <td>AUX_LINE_PORT</td>
* <td>Makefile CDEFS</td>
- * <td>PORT register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ * <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
- * <td>RESET_LINE_PIN</td>
+ * <td>AUX_LINE_PIN</td>
* <td>Makefile CDEFS</td>
- * <td>PIN register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ * <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
- * <td>RESET_LINE_DDR</td>
+ * <td>AUX_LINE_DDR</td>
* <td>Makefile CDEFS</td>
- * <td>DDR register for the programmer's target RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ * <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
- * <td>RESET_LINE_MASK</td>
+ * <td>AUX_LINE_MASK</td>
* <td>Makefile CDEFS</td>
- * <td>Mask for the programmer's target RESET line on the chosen port. <b>Must not be the AVR's /SS pin</b>, as the
- * target pins are tri-stated when not in use, and low signals on the /SS pin will force SPI slave mode when the
- * pin is configured as an input. When in PDI programming mode, this is the target clock pin.
- * <i>Ignored when compiled for the XPLAIN board.</i></td>
+ * <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
+ * but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>. <i>Ignored when
+ * compiled for the XPLAIN board.</i></td>
* </tr>
* <tr>
* <td>VTARGET_ADC_CHANNEL</td>
@@ -252,7 +256,7 @@
* <td>Makefile CDEFS</td>
* <td>Define to force the PDI and TPI protocols (when enabled) to use the much faster hardware USART instead of bit-banging
* to match the official AVRISP pinout. This breaks pinout compatibility with the official AVRISP MKII (and requires
- * seperate ISP and PDI/TPI programming headers) but increases programming speed dramatically.
+ * seperate ISP, PDI, and TPI programming headers) but increases programming speed dramatically.
* <i>Ignored when compiled for the XPLAIN board.</i></td>
* </tr>
* </table>
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index ebaf2f3e5..1bd688701 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -84,15 +84,15 @@ void ISPTarget_ChangeTargetResetLine(const bool ResetTarget)
{
if (ResetTarget)
{
- RESET_LINE_DDR |= RESET_LINE_MASK;
+ AUX_LINE_DDR |= AUX_LINE_MASK;
if (!(V2Params_GetParameterValue(PARAM_RESET_POLARITY)))
- RESET_LINE_PORT |= RESET_LINE_MASK;
+ AUX_LINE_PORT |= AUX_LINE_MASK;
}
else
{
- RESET_LINE_DDR &= ~RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR &= ~AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
}
}
@@ -144,7 +144,7 @@ uint8_t ISPTarget_WaitForProgComplete(const uint8_t ProgrammingMode, const uint1
}
/** Waits until the target has completed the last operation, by continuously polling the device's
- * BUSY flag until it is cleared, or until the \ref TARGET_BUSY_TIMEOUT_MS timeout period has expired.
+ * BUSY flag until it is cleared, or until the command timeout period has expired.
*
* \return V2 Protocol status \ref STATUS_CMD_OK if the no timeout occurred, \ref STATUS_RDY_BSY_TOUT otherwise
*/
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index def34991f..856b48903 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -189,8 +189,8 @@ void XPROGTarget_EnableTargetTPI(void)
IsSending = false;
/* Set /RESET line low for at least 90ns to enable TPI functionality */
- RESET_LINE_DDR |= RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR |= AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
asm volatile ("NOP"::);
asm volatile ("NOP"::);
@@ -269,8 +269,8 @@ void XPROGTarget_DisableTargetTPI(void)
#endif
/* Tristate target /RESET line */
- RESET_LINE_DDR &= ~RESET_LINE_MASK;
- RESET_LINE_PORT &= ~RESET_LINE_MASK;
+ AUX_LINE_DDR &= ~AUX_LINE_MASK;
+ AUX_LINE_PORT &= ~AUX_LINE_MASK;
}
/** Sends a byte via the USART.
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index f4c3b7b1d..3bbf454be 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -63,10 +63,10 @@
#define BITBANG_PDIDATA_PIN PINB
#define BITBANG_PDIDATA_MASK (1 << 3)
- #define BITBANG_PDICLOCK_PORT RESET_LINE_PORT
- #define BITBANG_PDICLOCK_DDR RESET_LINE_DDR
- #define BITBANG_PDICLOCK_PIN RESET_LINE_PIN
- #define BITBANG_PDICLOCK_MASK RESET_LINE_MASK
+ #define BITBANG_PDICLOCK_PORT AUX_LINE_PORT
+ #define BITBANG_PDICLOCK_DDR AUX_LINE_DDR
+ #define BITBANG_PDICLOCK_PIN AUX_LINE_PIN
+ #define BITBANG_PDICLOCK_MASK AUX_LINE_MASK
#define BITBANG_TPIDATA_PORT PORTB
#define BITBANG_TPIDATA_DDR DDRB
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index f5bb5b712..a3f136838 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -191,10 +191,10 @@ CSTANDARD = -std=gnu99
# Place -D or -U options here for C sources
CDEFS = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
-CDEFS += -DRESET_LINE_PORT=PORTB
-CDEFS += -DRESET_LINE_PIN=PINB
-CDEFS += -DRESET_LINE_DDR=DDRB
-CDEFS += -DRESET_LINE_MASK="(1 << 4)"
+CDEFS += -DAUX_LINE_PORT=PORTB
+CDEFS += -DAUX_LINE_PIN=PINB
+CDEFS += -DAUX_LINE_DDR=DDRB
+CDEFS += -DAUX_LINE_MASK="(1 << 4)"
CDEFS += -DVTARGET_ADC_CHANNEL=2
CDEFS += -DENABLE_ISP_PROTOCOL
CDEFS += -DENABLE_XPROG_PROTOCOL
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 01:54:29 +0000