aboutsummaryrefslogtreecommitdiffstats
path: root/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
diff options
context:
space:
mode:
Diffstat (limited to 'Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c')
-rw-r--r--Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c78
1 files changed, 39 insertions, 39 deletions
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
index 3d7b91365..da32f03dd 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.c
@@ -75,7 +75,7 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
for (;;)
{
/* Send the LDCS command to read the PDI STATUS register to see the NVM bus is active */
- XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_STATUS_REG);
+ XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_STATUS));
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
@@ -97,14 +97,14 @@ bool XMEGANVM_WaitWhileNVMBusBusy(void)
bool XMEGANVM_WaitWhileNVMControllerBusy(void)
{
/* Preload the pointer register with the NVM STATUS register address to check the BUSY flag */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATSIZE_4BYTES));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_STATUS);
/* Poll the NVM STATUS register while the NVM controller is busy */
for (;;)
{
/* Fetch the current status value via the pointer register (without auto-increment afterwards) */
- XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT << 2) | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT, PDI_DATSIZE_1BYTE));
uint8_t StatusRegister = XPROGTarget_ReceiveByte();
@@ -128,11 +128,11 @@ bool XMEGANVM_EnablePDI(void)
XPROGTarget_EnableTargetPDI();
/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
- XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
+ XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
XPROGTarget_SendByte(PDI_RESET_KEY);
/* Lower direction change guard time to 32 USART bits */
- XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
+ XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_CTRL));
XPROGTarget_SendByte(0x02);
/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
@@ -155,11 +155,11 @@ void XMEGANVM_DisablePDI(void)
do
{
/* Clear reset register */
- XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
+ XPROGTarget_SendByte(PDI_CMD_STCS(PDI_REG_RESET));
XPROGTarget_SendByte(0x00);
/* Read back the reset register, check to see if it took effect */
- XPROGTarget_SendByte(PDI_CMD_LDCS | PDI_RESET_REG);
+ XPROGTarget_SendByte(PDI_CMD_LDCS(PDI_REG_RESET));
} while (XPROGTarget_ReceiveByte() != 0x00);
XPROGTarget_DisableTargetPDI();
@@ -182,12 +182,12 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
return false;
/* Set the NVM command to the correct CRC read command */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(CRCCommand);
/* Set CMDEX bit in NVM CTRLA register to start the CRC generation */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
@@ -200,15 +200,15 @@ bool XMEGANVM_GetMemoryCRC(const uint8_t CRCCommand,
return false;
/* Load the PDI pointer register with the DAT0 register start address */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATSIZE_4BYTES));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_DAT0);
/* Send the REPEAT command to grab the CRC bytes */
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATSIZE_1BYTE));
XPROGTarget_SendByte(XMEGA_CRC_LENGTH_BYTES - 1);
/* Read in the CRC bytes from the target */
- XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATSIZE_1BYTE));
for (uint8_t i = 0; i < XMEGA_CRC_LENGTH_BYTES; i++)
((uint8_t*)CRCDest)[i] = XPROGTarget_ReceiveByte();
@@ -232,29 +232,29 @@ bool XMEGANVM_ReadMemory(const uint32_t ReadAddress,
return false;
/* Send the READNVM command to the NVM controller for reading of an arbitrary location */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(XMEGA_NVM_CMD_READNVM);
if (ReadSize > 1)
{
/* Load the PDI pointer register with the start address we want to read from */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATSIZE_4BYTES));
XMEGANVM_SendAddress(ReadAddress);
/* Send the REPEAT command with the specified number of bytes to read */
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATSIZE_1BYTE));
XPROGTarget_SendByte(ReadSize - 1);
/* Send a LD command with indirect access and post-increment to read out the bytes */
- XPROGTarget_SendByte(PDI_CMD_LD | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_LD(PDI_POINTER_INDIRECT_PI, PDI_DATSIZE_1BYTE));
while (ReadSize-- && TimeoutTicksRemaining)
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
}
else
{
/* Send a LDS command with the read address to read out the requested byte */
- XPROGTarget_SendByte(PDI_CMD_LDS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_LDS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendAddress(ReadAddress);
*(ReadBuffer++) = XPROGTarget_ReceiveByte();
}
@@ -279,12 +279,12 @@ bool XMEGANVM_WriteByteMemory(const uint8_t WriteCommand,
return false;
/* Send the memory write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(WriteCommand);
/* Send new memory byte to the memory of the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendAddress(WriteAddress);
XPROGTarget_SendByte(Byte);
@@ -318,12 +318,12 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
return false;
/* Send the memory buffer erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseBuffCommand);
/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
}
@@ -335,20 +335,20 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
return false;
/* Send the memory buffer write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(WriteBuffCommand);
/* Load the PDI pointer register with the start address we want to write to */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATSIZE_4BYTES));
XMEGANVM_SendAddress(WriteAddress);
/* Send the REPEAT command with the specified number of bytes to write */
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATSIZE_1BYTE));
XPROGTarget_SendByte(WriteSize - 1);
/* Send a ST command with indirect access and post-increment to write the bytes */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATSIZE_1BYTE));
while (WriteSize--)
XPROGTarget_SendByte(*(WriteBuffer++));
}
@@ -360,12 +360,12 @@ bool XMEGANVM_WritePageMemory(const uint8_t WriteBuffCommand,
return false;
/* Send the memory write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(WritePageCommand);
/* Send the address of the first page location to write the memory page */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendAddress(WriteAddress);
XPROGTarget_SendByte(0x00);
}
@@ -391,24 +391,24 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
if (EraseCommand == XMEGA_NVM_CMD_CHIPERASE)
{
/* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Set CMDEX bit in NVM CTRLA register to start the erase sequence */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
}
else if (EraseCommand == XMEGA_NVM_CMD_ERASEEEPROM)
{
/* Send the EEPROM page buffer erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF);
/* Set CMDEX bit in NVM CTRLA register to start the buffer erase */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
@@ -417,42 +417,42 @@ bool XMEGANVM_EraseMemory(const uint8_t EraseCommand,
return false;
/* Send the EEPROM memory buffer write command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF);
/* Load the PDI pointer register with the EEPROM page start address */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_DIRECT << 2) | PDI_DATSIZE_4BYTES);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_DIRECT, PDI_DATSIZE_4BYTES));
XMEGANVM_SendAddress(Address);
/* Send the REPEAT command with the specified number of bytes to write */
- XPROGTarget_SendByte(PDI_CMD_REPEAT | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_REPEAT(PDI_DATSIZE_1BYTE));
XPROGTarget_SendByte(XPROG_Param_EEPageSize - 1);
/* Send a ST command with indirect access and post-increment to tag each byte in the EEPROM page buffer */
- XPROGTarget_SendByte(PDI_CMD_ST | (PDI_POINTER_INDIRECT_PI << 2) | PDI_DATSIZE_1BYTE);
+ XPROGTarget_SendByte(PDI_CMD_ST(PDI_POINTER_INDIRECT_PI, PDI_DATSIZE_1BYTE));
for (uint8_t PageByte = 0; PageByte < XPROG_Param_EEPageSize; PageByte++)
XPROGTarget_SendByte(0x00);
/* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Set CMDEX bit in NVM CTRLA register to start the EEPROM erase sequence */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CTRLA);
XPROGTarget_SendByte(XMEGA_NVM_BIT_CTRLA_CMDEX);
}
else
{
/* Send the memory erase command to the target */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendNVMRegAddress(XMEGA_NVM_REG_CMD);
XPROGTarget_SendByte(EraseCommand);
/* Other erase modes just need us to address a byte within the target memory space */
- XPROGTarget_SendByte(PDI_CMD_STS | (PDI_DATSIZE_4BYTES << 2));
+ XPROGTarget_SendByte(PDI_CMD_STS(PDI_DATSIZE_4BYTES, PDI_DATSIZE_1BYTE));
XMEGANVM_SendAddress(Address);
XPROGTarget_SendByte(0x00);
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 06:04:05 +0000