diff options
Diffstat (limited to 'Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c')
| -rw-r--r-- | Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c | 48 |
1 files changed, 24 insertions, 24 deletions
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c index 9922c195e..85b31fbdb 100644 --- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c +++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c @@ -85,7 +85,7 @@ void ISPProtocol_EnterISPMode(void) for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
{
ISPProtocol_DelayMS(Enter_ISP_Params.ByteDelay);
- ResponseBytes[RByte] = SPI_Transfer(Enter_ISP_Params.EnterProgBytes[RByte]);
+ ResponseBytes[RByte] = SPI_TransferByte(Enter_ISP_Params.EnterProgBytes[RByte]);
}
/* Check if polling disabled, or if the polled value matches the expected value */
@@ -204,10 +204,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
- SPI_Send(Write_Memory_Params.ProgrammingCommands[0]);
- SPI_Send(CurrentAddress >> 8);
- SPI_Send(CurrentAddress & 0xFF);
- SPI_Send(ByteToWrite);
+ SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
+ SPI_SendByte(CurrentAddress >> 8);
+ SPI_SendByte(CurrentAddress & 0xFF);
+ SPI_SendByte(ByteToWrite);
/* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
* or low byte at the current word address */
@@ -230,10 +230,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) /* If the current page must be committed, send the PROGRAM PAGE command to the target */
if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
{
- SPI_Send(Write_Memory_Params.ProgrammingCommands[1]);
- SPI_Send(StartAddress >> 8);
- SPI_Send(StartAddress & 0xFF);
- SPI_Send(0x00);
+ SPI_SendByte(Write_Memory_Params.ProgrammingCommands[1]);
+ SPI_SendByte(StartAddress >> 8);
+ SPI_SendByte(StartAddress & 0xFF);
+ SPI_SendByte(0x00);
/* Check if polling is possible, if not switch to timed delay mode */
if (!(PollAddress))
@@ -254,10 +254,10 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command) bool IsOddByte = (CurrentByte & 0x01);
uint8_t ByteToWrite = *(NextWriteByte++);
- SPI_Send(Write_Memory_Params.ProgrammingCommands[0]);
- SPI_Send(CurrentAddress >> 8);
- SPI_Send(CurrentAddress & 0xFF);
- SPI_Send(ByteToWrite);
+ SPI_SendByte(Write_Memory_Params.ProgrammingCommands[0]);
+ SPI_SendByte(CurrentAddress >> 8);
+ SPI_SendByte(CurrentAddress & 0xFF);
+ SPI_SendByte(ByteToWrite);
/* AVR FLASH addressing requires us to modify the write command based on if we are writing a high
* or low byte at the current word address */
@@ -325,10 +325,10 @@ void ISPProtocol_ReadMemory(uint8_t V2Command) for (uint16_t CurrentByte = 0; CurrentByte < Read_Memory_Params.BytesToRead; CurrentByte++)
{
/* Read the next byte from the desired memory space in the device */
- SPI_Send(Read_Memory_Params.ReadMemoryCommand);
- SPI_Send(CurrentAddress >> 8);
- SPI_Send(CurrentAddress & 0xFF);
- Endpoint_Write_Byte(SPI_Receive());
+ SPI_SendByte(Read_Memory_Params.ReadMemoryCommand);
+ SPI_SendByte(CurrentAddress >> 8);
+ SPI_SendByte(CurrentAddress & 0xFF);
+ Endpoint_Write_Byte(SPI_ReceiveByte());
/* Check if the endpoint bank is currently full, if so send the packet */
if (!(Endpoint_IsReadWriteAllowed()))
@@ -381,7 +381,7 @@ void ISPProtocol_ChipErase(void) /* Send the chip erase commands as given by the host to the device */
for (uint8_t SByte = 0; SByte < sizeof(Erase_Chip_Params.EraseCommandBytes); SByte++)
- SPI_Send(Erase_Chip_Params.EraseCommandBytes[SByte]);
+ SPI_SendByte(Erase_Chip_Params.EraseCommandBytes[SByte]);
/* Use appropriate command completion check as given by the host (delay or busy polling) */
if (!(Erase_Chip_Params.PollMethod))
@@ -416,7 +416,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command) /* Send the Fuse or Lock byte read commands as given by the host to the device, store response */
for (uint8_t RByte = 0; RByte < sizeof(ResponseBytes); RByte++)
- ResponseBytes[RByte] = SPI_Transfer(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
+ ResponseBytes[RByte] = SPI_TransferByte(Read_FuseLockSigOSCCAL_Params.ReadCommandBytes[RByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
@@ -444,7 +444,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command) /* Send the Fuse or Lock byte program commands as given by the host to the device */
for (uint8_t SByte = 0; SByte < sizeof(Write_FuseLockSig_Params.WriteCommandBytes); SByte++)
- SPI_Send(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
+ SPI_SendByte(Write_FuseLockSig_Params.WriteCommandBytes[SByte]);
Endpoint_Write_Byte(V2Command);
Endpoint_Write_Byte(STATUS_CMD_OK);
@@ -479,9 +479,9 @@ void ISPProtocol_SPIMulti(void) while (CurrTxPos < SPI_Multi_Params.RxStartAddr)
{
if (CurrTxPos < SPI_Multi_Params.TxBytes)
- SPI_Send(SPI_Multi_Params.TxData[CurrTxPos]);
+ SPI_SendByte(SPI_Multi_Params.TxData[CurrTxPos]);
else
- SPI_Send(0);
+ SPI_SendByte(0);
CurrTxPos++;
}
@@ -490,9 +490,9 @@ void ISPProtocol_SPIMulti(void) while (CurrRxPos < SPI_Multi_Params.RxBytes)
{
if (CurrTxPos < SPI_Multi_Params.TxBytes)
- Endpoint_Write_Byte(SPI_Transfer(SPI_Multi_Params.TxData[CurrTxPos++]));
+ Endpoint_Write_Byte(SPI_TransferByte(SPI_Multi_Params.TxData[CurrTxPos++]));
else
- Endpoint_Write_Byte(SPI_Receive());
+ Endpoint_Write_Byte(SPI_ReceiveByte());
/* Check to see if we have filled the endpoint bank and need to send the packet */
if (!(Endpoint_IsReadWriteAllowed()))
|