diff options
Diffstat (limited to 'LUFA/ManPages/ConfiguringApps.txt')
| -rw-r--r-- | LUFA/ManPages/ConfiguringApps.txt | 12 |
1 files changed, 7 insertions, 5 deletions
diff --git a/LUFA/ManPages/ConfiguringApps.txt b/LUFA/ManPages/ConfiguringApps.txt index 058d79b1f..f601efacf 100644 --- a/LUFA/ManPages/ConfiguringApps.txt +++ b/LUFA/ManPages/ConfiguringApps.txt @@ -6,11 +6,11 @@ /** \page Page_ConfiguringApps Configuring the Demos, Bootloaders and Projects * - * If the target AVR model, clock speed, board or other settings are different to the current settings, they must be changed + * If the target AVR model, clock speed, board or other settings are different from the current settings, they must be changed * and the project recompiled from the source code before being programmed into the AVR microcontroller. Most project * configuration options are located in the "makefile" build script inside each LUFA application's folder, however some - * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in the - * main .c source file of the project. See each project's individual documentation for application-specific configuration + * demo or application-specific configuration settings (such as the output format in the AudioOut demo) are located in one or + * more of the source files of the project. See each project's individual documentation for application-specific configuration * values. * * Each project "makefile" contains all the script and configuration data required to compile each project. When opened with @@ -20,7 +20,7 @@ * Inside each makefile, a number of configuration variables are located, with the format "<VARIABLE NAME> = <VALUE>". For * each application, the important variables which should be altered are: * - * - <b>MCU</b>, the target AVR processor. + * - <b>MCU</b>, the target AVR processor * - <b>BOARD</b>, the target board hardware * - <b>F_CLOCK</b>, the target raw master clock frequency, before any prescaling is performed * - <b>F_CPU</b>, the target AVR CPU master clock frequency, after any prescaling @@ -35,7 +35,7 @@ * (such as the AT90USB1287, or the ATMEGA32U4), in all lower-case (e.g. "at90usb1287"). Note that not all demos support all the * USB AVR models, as they may make use of peripherals or modes only present in some devices. * - * For supported library AVR models, see main documentation page. + * For supported processor models, see \ref Page_DeviceSupport. * * \section Sec_BOARD The BOARD Parameter * This parameter indicates the target AVR board hardware for the compiled application. Some LUFA library drivers are board-specific, @@ -48,6 +48,8 @@ * directory into a /Board/ folder inside the application directory, and the stub driver completed with the appropriate code to drive the * custom board's hardware. * + * For boards with built in hardware driver support within the LUFA library, see \ref Page_DeviceSupport. + * * \section Sec_F_CLOCK The F_CLOCK Parameter * This parameter indicates the target AVR's input clock frequency, in Hz. This is the actual clock input, before any prescaling is performed. In the * USB AVR architecture, the input clock before any prescaling is fed directly to the PLL subsystem, and thus the PLL is derived directly from the |