aboutsummaryrefslogtreecommitdiffstats
path: root/LUFA/Drivers
diff options
context:
space:
mode:
Diffstat (limited to 'LUFA/Drivers')
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h2
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h8
-rw-r--r--LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h4
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h23
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h39
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h6
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h9
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.c16
-rw-r--r--LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.h6
9 files changed, 34 insertions, 79 deletions
diff --git a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
index 61e47cfbd..dbbe884ff 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
@@ -92,7 +92,7 @@
defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)))
/** String descriptor index for the device's unique serial number string descriptor within the device.
* This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
- * number allocations) to a device regardless of the port it is plugged in to on the host. Some USB AVRs contain
+ * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
* a unique serial number internally, and setting the device descriptors serial number string index to this value
* will cause it to use the internal serial number.
*
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
index b51f17dd7..30979aff9 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
@@ -101,7 +101,7 @@
#if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
#define ENDPOINT_DETAILS_MAXEP 7
- #define ENDPOINT_DETAILS_EP0 64, 2
+ #define ENDPOINT_DETAILS_EP0 64, 1
#define ENDPOINT_DETAILS_EP1 256, 2
#define ENDPOINT_DETAILS_EP2 64, 2
#define ENDPOINT_DETAILS_EP3 64, 2
@@ -111,7 +111,7 @@
#else
#define ENDPOINT_DETAILS_MAXEP 5
- #define ENDPOINT_DETAILS_EP0 64, 2
+ #define ENDPOINT_DETAILS_EP0 64, 1
#define ENDPOINT_DETAILS_EP1 64, 1
#define ENDPOINT_DETAILS_EP2 64, 1
#define ENDPOINT_DETAILS_EP3 64, 2
@@ -262,8 +262,8 @@
* ascending order, or bank corruption will occur.
* \n\n
*
- * \note Certain models of USB AVR's endpoints may have different maximum packet sizes based on the endpoint's
- * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each endpoint.
+ * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to
+ * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
* \n\n
*
* \note The default control endpoint should not be manually configured by the user application, as
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index 42876d678..3aea58f5c 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -838,8 +838,8 @@
* or bank corruption will occur.
* \n\n
*
- * \note Certain models of USB AVR's pipes may have different maximum packet sizes based on the pipe's
- * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each pipe.
+ * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's
+ * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe.
* \n\n
*
* \note The default control pipe should not be manually configured by the user application, as it is
diff --git a/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
index 0e7692330..e74f361ee 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Device_UC3B.h
@@ -63,18 +63,13 @@
/* Macros: */
/** \name USB Device Mode Option Masks */
//@{
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR) || defined(__DOXYGEN__)
- /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
- * USB interface should be initialized in low speed (1.5Mb/s) mode.
- *
- * \note Low Speed mode is not available on all USB AVR models.
- * \n
- *
- * \note Restrictions apply on the number, size and type of endpoints which can be used
- * when running in low speed mode - refer to the USB 2.0 specification.
- */
- #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
- #endif
+ /** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
+ * USB interface should be initialized in low speed (1.5Mb/s) mode.
+ *
+ * \note Restrictions apply on the number, size and type of endpoints which can be used
+ * when running in low speed mode - refer to the USB 2.0 specification.
+ */
+ #define USB_DEVICE_OPT_LOWSPEED (1 << 0)
/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the
* USB interface should be initialized in full speed (12Mb/s) mode.
@@ -84,7 +79,7 @@
/** String descriptor index for the device's unique serial number string descriptor within the device.
* This unique serial number is used by the host to associate resources to the device (such as drivers or COM port
- * number allocations) to a device regardless of the port it is plugged in to on the host. Some USB AVRs contain
+ * number allocations) to a device regardless of the port it is plugged in to on the host. Some microcontrollers contain
* a unique serial number internally, and setting the device descriptors serial number string index to this value
* will cause it to use the internal serial number.
*
@@ -152,7 +147,6 @@
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Inline Functions: */
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
static inline void USB_Device_SetLowSpeed(void) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetLowSpeed(void)
{
@@ -164,7 +158,6 @@
{
AVR32_USBB.UDCON.ls = false;
}
- #endif
static inline void USB_Device_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
static inline void USB_Device_SetDeviceAddress(const uint8_t Address)
diff --git a/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
index ca7403a80..556ac84b1 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Endpoint_UC3B.h
@@ -98,25 +98,15 @@
#define _ENDPOINT_GET_BANKS2(EPDetails) _ENDPOINT_GET_BANKS3(EPDetails)
#define _ENDPOINT_GET_BANKS3(MaxSize, Banks) (Banks)
- #if defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR)
- #define ENDPOINT_DETAILS_MAXEP 7
-
- #define ENDPOINT_DETAILS_EP0 64, 2
- #define ENDPOINT_DETAILS_EP1 256, 2
- #define ENDPOINT_DETAILS_EP2 64, 2
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #define ENDPOINT_DETAILS_EP5 64, 2
- #define ENDPOINT_DETAILS_EP6 64, 2
- #else
- #define ENDPOINT_DETAILS_MAXEP 5
+ #define ENDPOINT_DETAILS_MAXEP 7
- #define ENDPOINT_DETAILS_EP0 64, 2
- #define ENDPOINT_DETAILS_EP1 64, 1
- #define ENDPOINT_DETAILS_EP2 64, 1
- #define ENDPOINT_DETAILS_EP3 64, 2
- #define ENDPOINT_DETAILS_EP4 64, 2
- #endif
+ #define ENDPOINT_DETAILS_EP0 64, 1
+ #define ENDPOINT_DETAILS_EP1 64, 2
+ #define ENDPOINT_DETAILS_EP2 64, 2
+ #define ENDPOINT_DETAILS_EP3 64, 2
+ #define ENDPOINT_DETAILS_EP4 64, 2
+ #define ENDPOINT_DETAILS_EP5 256, 2
+ #define ENDPOINT_DETAILS_EP6 256, 2
/* Inline Functions: */
static inline uint32_t Endpoint_BytesToEPSizeMask(const uint16_t Bytes) ATTR_WARN_UNUSED_RESULT ATTR_CONST
@@ -174,13 +164,6 @@
* accesses the second bank.
*/
#define ENDPOINT_BANK_DOUBLE AVR32_USBB_UECFG0_EPBK_DOUBLE
-
- /** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
- * that the endpoint should have three banks, which requires more USB FIFO memory but results
- * in faster transfers as one USB device (the AVR or the host) can access one bank while the other
- * accesses the remaining banks.
- */
- #define ENDPOINT_BANK_TRIPLE AVR32_USBB_UECFG0_EPBK_TRIPLE
//@}
#if (!defined(FIXED_CONTROL_ENDPOINT_SIZE) || defined(__DOXYGEN__))
@@ -210,7 +193,7 @@
#if !defined(CONTROL_ONLY_DEVICE) || defined(__DOXYGEN__)
/** Total number of endpoints (including the default control endpoint at address 0) which may
- * be used in the device. Different USB AVR models support different amounts of endpoints,
+ * be used in the device. Different AVR models support different amounts of endpoints,
* this value reflects the maximum number of endpoints for the currently selected AVR model.
*/
#define ENDPOINT_TOTAL_ENDPOINTS ENDPOINT_DETAILS_MAXEP
@@ -270,8 +253,8 @@
* ascending order, or bank corruption will occur.
* \n\n
*
- * \note Certain models of USB AVR's endpoints may have different maximum packet sizes based on the endpoint's
- * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each endpoint.
+ * \note Different endpoints may have different maximum packet sizes based on the endpoint's index - refer to
+ * the chosen microcontroller model's datasheet to determine the maximum bank size for each endpoint.
* \n\n
*
* \note The default control endpoint should not be manually configured by the user application, as
diff --git a/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
index 816b19831..4d08a4c98 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Host_UC3B.h
@@ -355,8 +355,6 @@
static inline void USB_Host_VBUS_Manual_Enable(void)
{
AVR32_USBB.USBCON.vbushwc = true;
-
- // TODO: Manual VBUS pin output setup
}
static inline void USB_Host_VBUS_Auto_On(void) ATTR_ALWAYS_INLINE;
@@ -368,7 +366,7 @@
static inline void USB_Host_VBUS_Manual_On(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Manual_On(void)
{
- // TODO: Manual VBUS pin output on
+ AVR32_USBB.USBSTASET.vbusrqs = true;
}
static inline void USB_Host_VBUS_Auto_Off(void) ATTR_ALWAYS_INLINE;
@@ -380,7 +378,7 @@
static inline void USB_Host_VBUS_Manual_Off(void) ATTR_ALWAYS_INLINE;
static inline void USB_Host_VBUS_Manual_Off(void)
{
- // TODO: Manual VBUS pin output off
+ AVR32_USBB.USBSTACLR.vbusrqc = true;
}
static inline void USB_Host_SetDeviceAddress(const uint8_t Address) ATTR_ALWAYS_INLINE;
diff --git a/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
index 1d7a002e4..484e48ac1 100644
--- a/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/Pipe_UC3B.h
@@ -172,15 +172,14 @@
#define PIPE_CONTROLPIPE_DEFAULT_SIZE 64
/** Total number of pipes (including the default control pipe at address 0) which may be used in
- * the device. Different USB AVR models support different amounts of pipes, this value reflects
- * the maximum number of pipes for the currently selected AVR model.
+ * the device.
*/
#define PIPE_TOTAL_PIPES 7
/** Size in bytes of the largest pipe bank size possible in the device. Not all banks on each AVR
* model supports the largest bank size possible on the device; different pipe numbers support
* different maximum bank sizes. This value reflects the largest possible bank of any pipe on the
- * currently selected USB AVR model.
+ * currently selected UC3B AVR model.
*/
#define PIPE_MAX_SIZE 256
@@ -857,8 +856,8 @@
* or bank corruption will occur.
* \n\n
*
- * \note Certain models of USB AVR's pipes may have different maximum packet sizes based on the pipe's
- * index - refer to the chosen USB AVR's datasheet to determine the maximum bank size for each pipe.
+ * \note Certain microcontroller model's pipes may have different maximum packet sizes based on the pipe's
+ * index - refer to the chosen microcontroller's datasheet to determine the maximum bank size for each pipe.
* \n\n
*
* \note The default control pipe should not be manually configured by the user application, as it is
diff --git a/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.c b/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.c
index 68092fbf6..cc4de29dd 100644
--- a/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.c
+++ b/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.c
@@ -152,25 +152,15 @@ static void USB_Init_Device(void)
USB_Descriptor_Device_t* DeviceDescriptorPtr;
if (CALLBACK_USB_GetDescriptor((DTYPE_Device << 8), 0, (void*)&DeviceDescriptorPtr) != NO_DESCRIPTOR)
- {
- #if defined(USE_RAM_DESCRIPTORS)
- USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
- #elif defined(USE_EEPROM_DESCRIPTORS)
- USB_ControlEndpointSize = eeprom_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #else
- USB_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
- #endif
- }
+ USB_ControlEndpointSize = DeviceDescriptorPtr->Endpoint0Size;
#endif
- #if (defined(USB_SERIES_4_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_7_AVR))
if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
USB_Device_SetLowSpeed();
else
USB_Device_SetFullSpeed();
USB_INT_Enable(USB_INT_VBUS);
- #endif
Endpoint_ConfigureEndpoint(ENDPOINT_CONTROLEP, EP_TYPE_CONTROL,
ENDPOINT_DIR_OUT, USB_ControlEndpointSize,
@@ -192,9 +182,7 @@ static void USB_Init_Host(void)
USB_Host_HostMode_On();
- USB_Host_VBUS_Auto_Off();
- USB_Host_VBUS_Manual_Enable();
- USB_Host_VBUS_Manual_On();
+ USB_Host_VBUS_Auto_On();
USB_INT_Enable(USB_INT_SRPI);
USB_INT_Enable(USB_INT_BCERRI);
diff --git a/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.h b/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.h
index 7eb69cd4d..56ee252d5 100644
--- a/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.h
+++ b/LUFA/Drivers/USB/Core/UC3B/USBController_UC3B.h
@@ -123,8 +123,6 @@
/* Inline Functions: */
/** Determines if the VBUS line is currently high (i.e. the USB host is supplying power).
*
- * \note This function is not available on some AVR models which do not support hardware VBUS monitoring.
- *
* \return Boolean \c true if the VBUS line is currently detecting power from a host, \c false otherwise.
*/
static inline bool USB_VBUS_GetStatus(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE;
@@ -193,10 +191,6 @@
* this function). To statically set the USB options, pass in the \c USE_STATIC_OPTIONS token,
* defined to the appropriate options masks. When the options are statically set, this
* parameter does not exist in the function prototype.
- * \n\n
- *
- * \note The mode parameter does not exist on devices where only one mode is possible, such as USB
- * AVR models which only implement the USB device mode in hardware.
*
* \see \ref Group_Device for the \c USB_DEVICE_OPT_* masks.
*/
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-05 12:44:10 +0000