diff options
Diffstat (limited to 'LUFA/Drivers')
29 files changed, 79 insertions, 56 deletions
diff --git a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h index e9ff2f888..98665740f 100644 --- a/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h +++ b/LUFA/Drivers/Board/AVR8/BUMBLEB/Joystick.h @@ -29,7 +29,7 @@ */ /** \file - * \brief Board specific joystick driver header for the Fletchtronics BUMLEB. + * \brief Board specific joystick driver header for the Fletchtronics BUMBLEB. * \copydetails Group_Joystick_BUMBLEB * * \note This file should not be included directly. It is automatically included as needed by the joystick driver @@ -38,7 +38,7 @@ /** \ingroup Group_Joystick * \defgroup Group_Joystick_BUMBLEB BUMBLEB - * \brief Board specific joystick driver header for the Fletchtronics BUMLEB. + * \brief Board specific joystick driver header for the Fletchtronics BUMBLEB. * * Board specific joystick driver header for the Fletchtronics BUMBLEB (http://fletchtronics.net/bumble-b). The BUMBLEB * third-party board does not include any on-board peripherals, but does have an officially recommended external peripheral diff --git a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h index c9153b232..8a39fa641 100644 --- a/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h +++ b/LUFA/Drivers/Board/AVR8/CULV3/Buttons.h @@ -32,15 +32,15 @@ * \brief Board specific LED driver header for the Busware CULV3. * \copydetails Group_LEDs_CULV3 * - * \note This file should not be included directly. It is automatically included as needed by the LEDs driver + * \note This file should not be included directly. It is automatically included as needed by the Buttons driver * dispatch header located in LUFA/Drivers/Board/LEDs.h. */ -/** \ingroup Group_LEDs - * \defgroup Group_LEDs_CULV3 CULV3 - * \brief Board specific LED driver header for the Busware CULV3. +/** \ingroup Group_Buttons + * \defgroup Group_Buttons_CULV3 CULV3 + * \brief Board specific Buttons driver header for the Busware CULV3. * - * Board specific LED driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL). + * Board specific Buttons driver header for the Busware CUL V3 (http://busware.de/tiki-index.php?page=CUL). * * @{ */ diff --git a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h index a1e8938d2..0b496a829 100644 --- a/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/EVK527/Dataflash.h @@ -128,7 +128,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) { @@ -163,7 +163,7 @@ } /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h index 3b5f1ed63..c29f18a10 100644 --- a/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK525/Dataflash.h @@ -128,7 +128,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) { @@ -163,7 +163,7 @@ } /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h index 7a5feb725..7f8f72896 100644 --- a/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/STK526/Dataflash.h @@ -128,7 +128,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) { @@ -163,7 +163,7 @@ } /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h index c5be10190..f3af9bfb1 100644 --- a/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/USBKEY/Dataflash.h @@ -131,7 +131,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) { @@ -169,7 +169,7 @@ } /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h index 7ecefba5a..113505a28 100644 --- a/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h +++ b/LUFA/Drivers/Board/AVR8/XPLAIN/Dataflash.h @@ -134,7 +134,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress) { @@ -169,7 +169,7 @@ } /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h index ed584e13c..d3011062d 100644 --- a/LUFA/Drivers/Board/Buttons.h +++ b/LUFA/Drivers/Board/Buttons.h @@ -56,7 +56,7 @@ * It provides a way to easily configure and check the status of all the buttons on the board so that appropriate * actions can be taken. * - * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project + * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Buttons.h file in the user project * directory. Otherwise, it will include the appropriate built in board driver header file. * * For possible \c BOARD makefile values, see \ref Group_BoardTypes. diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h index 99679808b..ff71e6f7c 100644 --- a/LUFA/Drivers/Board/Dataflash.h +++ b/LUFA/Drivers/Board/Dataflash.h @@ -176,7 +176,7 @@ * are deselected. * * \param[in] PageAddress Address of the page to manipulate, ranging from - * ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). + * 0 to ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). */ static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress); @@ -191,7 +191,7 @@ static inline void Dataflash_WaitWhileBusy(void); /** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with - * dataflash commands which require a complete 24-byte address. + * dataflash commands which require a complete 24-bit address. * * \param[in] PageAddress Page address within the selected dataflash IC * \param[in] BufferByte Address within the dataflash's buffer diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h index c517a752b..ef97e752f 100644 --- a/LUFA/Drivers/Board/Joystick.h +++ b/LUFA/Drivers/Board/Joystick.h @@ -55,7 +55,7 @@ * Hardware Joystick driver. This module provides an easy to use interface to control the hardware digital Joystick * located on many boards. * - * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project + * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Joystick.h file in the user project * directory. Otherwise, it will include the appropriate built in board driver header file. * * For possible \c BOARD makefile values, see \ref Group_BoardTypes. diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h index 316f812a2..5b407b4d7 100644 --- a/LUFA/Drivers/Board/LEDs.h +++ b/LUFA/Drivers/Board/LEDs.h @@ -55,7 +55,7 @@ * Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It * provides an interface to configure, test and change the status of all the board LEDs. * - * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/Dataflash.h file in the user project + * If the \c BOARD value is set to \c BOARD_USER, this will include the \c /Board/LEDs.h file in the user project * directory. Otherwise, it will include the appropriate built in board driver header file. If the BOARD value * is set to \c BOARD_NONE, this driver is silently disabled. * diff --git a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h index 634c54480..36e7de3f0 100644 --- a/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h +++ b/LUFA/Drivers/Peripheral/AVR8/SPI_AVR8.h @@ -145,7 +145,7 @@ /** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out MSB first. */ #define SPI_ORDER_MSB_FIRST (0 << DORD) - /** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out MSB first. */ + /** SPI data order mask for \c SPI_Init(). Indicates that data should be shifted out LSB first. */ #define SPI_ORDER_LSB_FIRST (1 << DORD) //@} diff --git a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c index edfc9865c..ef35ac686 100644 --- a/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c +++ b/LUFA/Drivers/Peripheral/AVR8/TWI_AVR8.c @@ -1,10 +1,33 @@ /* + LUFA Library Copyright (C) Dean Camera, 2011. dean [at] fourwalledcubicle [dot] com www.lufa-lib.org */ +/* + Copyright 2011 Dean Camera (dean [at] fourwalledcubicle [dot] com) + + Permission to use, copy, modify, distribute, and sell this + software and its documentation for any purpose is hereby granted + without fee, provided that the above copyright notice appear in + all copies and that both that the copyright notice and this + permission notice and warranty disclaimer appear in supporting + documentation, and that the name of the author not be used in + advertising or publicity pertaining to distribution of the + software without specific, written prior permission. + + The author disclaim all warranties with regard to this + software, including all implied warranties of merchantability + and fitness. In no event shall the author be liable for any + special, indirect or consequential damages or any damages + whatsoever resulting from loss of use, data or profits, whether + in an action of contract, negligence or other tortious action, + arising out of or in connection with the use or performance of + this software. +*/ + #define __INCLUDE_FROM_TWI_C #include "../TWI.h" diff --git a/LUFA/Drivers/USB/Class/Common/Audio.h b/LUFA/Drivers/USB/Class/Common/Audio.h index fd9a3a92b..247f7f6d4 100644 --- a/LUFA/Drivers/USB/Class/Common/Audio.h +++ b/LUFA/Drivers/USB/Class/Common/Audio.h @@ -477,7 +477,7 @@ uint8_t UnitID; /**< ID value of this feature unit - must be a unique value within the device. */ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit. */ - uint8_t ControlSize; /**< Size of each element in the \c ChanelControlls array. */ + uint8_t ControlSize; /**< Size of each element in the \c ChannelControls array. */ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel. */ uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device. */ @@ -506,7 +506,7 @@ uint8_t bUnitID; /**< ID value of this feature unit - must be a unique value within the device. */ uint8_t bSourceID; /**< Source ID value of the audio source input into this feature unit. */ - uint8_t bControlSize; /**< Size of each element in the \c ChanelControlls array. */ + uint8_t bControlSize; /**< Size of each element in the \c ChannelControls array. */ uint8_t bmaControls[3]; /**< Feature masks for the control channel, and each separate audio channel. */ uint8_t iFeature; /**< Index of a string descriptor describing this descriptor within the device. */ diff --git a/LUFA/Drivers/USB/Class/Common/MassStorage.h b/LUFA/Drivers/USB/Class/Common/MassStorage.h index 0f5db97ec..9f8de4e0b 100644 --- a/LUFA/Drivers/USB/Class/Common/MassStorage.h +++ b/LUFA/Drivers/USB/Class/Common/MassStorage.h @@ -132,7 +132,7 @@ /** SCSI Sense Code to indicate an error whilst accessing the medium. */ #define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03 - /** SCSI Sense Code to indicate a hardware has occurred. */ + /** SCSI Sense Code to indicate a hardware error has occurred. */ #define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04 /** SCSI Sense Code to indicate that an illegal request has been issued. */ diff --git a/LUFA/Drivers/USB/Class/Device/Audio.h b/LUFA/Drivers/USB/Class/Device/Audio.h index a09076341..ed23683a6 100644 --- a/LUFA/Drivers/USB/Class/Device/Audio.h +++ b/LUFA/Drivers/USB/Class/Device/Audio.h @@ -218,7 +218,7 @@ /** Reads the next 8-bit audio sample from the current audio interface. * * \pre This should be preceded immediately by a call to the \ref Audio_Device_IsSampleReceived() function to ensure - * ensure the correct endpoint is selected and ready for data. + * that the correct endpoint is selected and ready for data. * * \param[in,out] AudioInterfaceInfo Pointer to a structure containing an Audio Class configuration and state. * diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h index c3a97f6ef..e0fa50259 100644 --- a/LUFA/Drivers/USB/Class/Device/MIDI.h +++ b/LUFA/Drivers/USB/Class/Device/MIDI.h @@ -81,13 +81,13 @@ { uint8_t StreamingInterfaceNumber; /**< Index of the Audio Streaming interface within the device this structure controls. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming MIDI data, if available (zero if unused). */ - uint16_t DataINEndpointSize; /**< Size in bytes of the incoming MIDI data endpoint, if available (zero if unused). */ + uint8_t DataINEndpointNumber; /**< Endpoint number of the incoming MIDI IN data, if available (zero if unused). */ + uint16_t DataINEndpointSize; /**< Size in bytes of the incoming MIDI IN data endpoint, if available (zero if unused). */ bool DataINEndpointDoubleBank; /**< Indicates if the MIDI interface's IN data endpoint should use double banking. */ - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing MIDI data, if available (zero if unused). */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing MIDI data endpoint, if available (zero if unused). */ - bool DataOUTEndpointDoubleBank; /**< Indicates if the MIDI interface's IN data endpoint should use double banking. */ + uint8_t DataOUTEndpointNumber; /**< Endpoint number of the outgoing MIDI OUT data, if available (zero if unused). */ + uint16_t DataOUTEndpointSize; /**< Size in bytes of the outgoing MIDI OUT data endpoint, if available (zero if unused). */ + bool DataOUTEndpointDoubleBank; /**< Indicates if the MIDI interface's OUT data endpoint should use double banking. */ } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ diff --git a/LUFA/Drivers/USB/Class/Device/RNDIS.h b/LUFA/Drivers/USB/Class/Device/RNDIS.h index 734ceb3fd..66b85b15e 100644 --- a/LUFA/Drivers/USB/Class/Device/RNDIS.h +++ b/LUFA/Drivers/USB/Class/Device/RNDIS.h @@ -79,23 +79,23 @@ { const struct { - uint8_t ControlInterfaceNumber; /**< Interface number of the CDC control interface within the device. */ + uint8_t ControlInterfaceNumber; /**< Interface number of the RNDIS control interface within the device. */ - uint8_t DataINEndpointNumber; /**< Endpoint number of the CDC interface's IN data endpoint. */ - uint16_t DataINEndpointSize; /**< Size in bytes of the CDC interface's IN data endpoint. */ + uint8_t DataINEndpointNumber; /**< Endpoint number of the RNDIS interface's IN data endpoint. */ + uint16_t DataINEndpointSize; /**< Size in bytes of the RNDIS interface's IN data endpoint. */ bool DataINEndpointDoubleBank; /**< Indicates if the RNDIS interface's IN data endpoint should use double banking. */ - uint8_t DataOUTEndpointNumber; /**< Endpoint number of the CDC interface's OUT data endpoint. */ - uint16_t DataOUTEndpointSize; /**< Size in bytes of the CDC interface's OUT data endpoint. */ + uint8_t DataOUTEndpointNumber; /**< Endpoint number of the RNDIS interface's OUT data endpoint. */ + uint16_t DataOUTEndpointSize; /**< Size in bytes of the RNDIS interface's OUT data endpoint. */ bool DataOUTEndpointDoubleBank; /**< Indicates if the RNDIS interface's OUT data endpoint should use double banking. */ - uint8_t NotificationEndpointNumber; /**< Endpoint number of the CDC interface's IN notification endpoint, if used. */ - uint16_t NotificationEndpointSize; /**< Size in bytes of the CDC interface's IN notification endpoint, if used. */ + uint8_t NotificationEndpointNumber; /**< Endpoint number of the RNDIS interface's IN notification endpoint, if used. */ + uint16_t NotificationEndpointSize; /**< Size in bytes of the RNDIS interface's IN notification endpoint, if used. */ bool NotificationEndpointDoubleBank; /**< Indicates if the RNDIS interface's notification endpoint should use double banking. */ char* AdapterVendorDescription; /**< String description of the adapter vendor. */ MAC_Address_t AdapterMACAddress; /**< MAC address of the adapter. */ - } Config; /**< Config data for the USB class interface within the device. All elements in this section. + } Config; /**< Config data for the USB class interface within the device. All elements in this section * <b>must</b> be set or the interface will fail to enumerate and operate correctly. */ struct @@ -114,7 +114,7 @@ /* Function Prototypes: */ /** Configures the endpoints of a given RNDIS interface, ready for use. This should be linked to the library * \ref EVENT_USB_Device_ConfigurationChanged() event so that the endpoints are configured when the configuration - * containing the given HID interface is selected. + * containing the given RNDIS interface is selected. * * \note The endpoint index numbers as given in the interface's configuration structure must not overlap with any other * interface, or endpoint bank corruption will occur. Gaps in the allocated endpoint numbers or non-sequential indexes @@ -133,7 +133,7 @@ */ void RNDIS_Device_ProcessControlRequest(USB_ClassInfo_RNDIS_Device_t* const RNDISInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - /** General management task for a given HID class interface, required for the correct operation of the interface. This should + /** General management task for a given RNDIS class interface, required for the correct operation of the interface. This should * be called frequently in the main program loop, before the master USB management task \ref USB_USBTask(). * * \param[in,out] RNDISInterfaceInfo Pointer to a structure containing a RNDIS Class configuration and state. diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h index 4bb98630f..455e2f9ef 100644 --- a/LUFA/Drivers/USB/Class/Host/CDC.h +++ b/LUFA/Drivers/USB/Class/Host/CDC.h @@ -185,7 +185,7 @@ */ uint8_t CDC_Host_SendControlLineStateChange(USB_ClassInfo_CDC_Host_t* const CDCInterfaceInfo) ATTR_NON_NULL_PTR_ARG(1); - /** Sends a Send Break request to the device. This is generally used to separate data data or to indicate a special condition + /** Sends a Send Break request to the device. This is generally used to separate data or to indicate a special condition * to the receiving device. * * \param[in,out] CDCInterfaceInfo Pointer to a structure containing a CDC Class host configuration and state. diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.h b/LUFA/Drivers/USB/Class/Host/StillImage.h index 51dc1e99d..b79b81747 100644 --- a/LUFA/Drivers/USB/Class/Host/StillImage.h +++ b/LUFA/Drivers/USB/Class/Host/StillImage.h @@ -100,7 +100,7 @@ * after \ref SI_Host_ConfigurePipes() is called and the Host state machine is in the * Configured state. */ - uint8_t InterfaceNumber; /**< Interface index of the Mass Storage interface within the attached device. */ + uint8_t InterfaceNumber; /**< Interface index of the Still Image interface within the attached device. */ uint16_t DataINPipeSize; /**< Size in bytes of the Still Image interface's IN data pipe. */ uint16_t DataOUTPipeSize; /**< Size in bytes of the Still Image interface's OUT data pipe. */ @@ -188,7 +188,7 @@ PIMA_Container_t* const PIMAHeader) ATTR_NON_NULL_PTR_ARG(1) ATTR_NON_NULL_PTR_ARG(2); - /** Receives a raw PIMA block header to the device. This can be used to receive arbitrary PIMA blocks from the device with + /** Receives a raw PIMA block header from the device. This can be used to receive arbitrary PIMA blocks from the device with * or without parameters. * * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the @@ -221,7 +221,7 @@ const uint8_t TotalParams, uint32_t* const Params) ATTR_NON_NULL_PTR_ARG(1); - /** Receives and checks a response block from the attached PIMA device, once a command has been issued and all data + /** Receives and checks a response block from the attached Still Image device, once a command has been issued and all data * associated with the command has been transferred. * * \pre This function must only be called when the Host state machine is in the \ref HOST_STATE_Configured state or the diff --git a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h index 433311d3b..f5a03d194 100644 --- a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.h @@ -452,7 +452,7 @@ uint16_t Length,
uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE().
+ /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_LE().
*
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@@ -465,7 +465,7 @@ uint16_t Length,
uint16_t* const BytesProcessed) ATTR_NON_NULL_PTR_ARG(1);
- /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE().
+ /** EEPROM buffer destination version of \ref Endpoint_Read_Stream_BE().
*
* \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h index bdbe31c33..7868ac36a 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h @@ -625,7 +625,7 @@ return UEDATX; } - /** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints. + /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints. * * \ingroup Group_EndpointPrimitiveRW_AVR8 * diff --git a/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h index fda145c1e..e9b92c047 100644 --- a/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/OTG_AVR8.h @@ -133,7 +133,7 @@ OTGCON &= ~(1 << HNPREQ); } - /** Indicates if the connected device is not currently sending a HNP request. + /** Indicates if the connected device is currently sending a HNP request. * * \return Boolean \c true if a HNP is currently being issued by the connected device, \c false otherwise. */ diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h index c7e21f73a..c6bdcfb4a 100644 --- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h +++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h @@ -590,7 +590,7 @@ return UPDATX; } - /** Writes one byte from the currently selected pipe's bank, for IN direction pipes. + /** Writes one byte to the currently selected pipe's bank, for IN direction pipes. * * \ingroup Group_PipePrimitiveRW_AVR8 * diff --git a/LUFA/Drivers/USB/Core/Events.h b/LUFA/Drivers/USB/Core/Events.h index 18814715e..2ea14bf10 100644 --- a/LUFA/Drivers/USB/Core/Events.h +++ b/LUFA/Drivers/USB/Core/Events.h @@ -78,7 +78,7 @@ /** Event for USB mode pin level change. This event fires when the USB interface is set to dual role * mode, and the UID pin level has changed to indicate a new mode (device or host). This event fires * before the mode is switched to the newly indicated mode but after the \ref EVENT_USB_Device_Disconnect - * event has fired (if connected before the role change). + * event has fired (if disconnected before the role change). * * \note This event only exists on microcontrollers that support dual role USB modes. * \n\n diff --git a/LUFA/Drivers/USB/Core/StdRequestType.h b/LUFA/Drivers/USB/Core/StdRequestType.h index 83f59afc6..9a9e6f214 100644 --- a/LUFA/Drivers/USB/Core/StdRequestType.h +++ b/LUFA/Drivers/USB/Core/StdRequestType.h @@ -222,7 +222,7 @@ { FEATURE_SEL_EndpointHalt = 0x00, /**< Feature selector for Clear Feature or Set Feature commands. When * used in a Set Feature or Clear Feature request this indicates that an - * endpoint (whose address is given elsewhere in the request should have + * endpoint (whose address is given elsewhere in the request) should have * its stall condition changed. */ FEATURE_SEL_DeviceRemoteWakeup = 0x01, /**< Feature selector for Device level Remote Wakeup enable set or clear. diff --git a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h index 1c9f6ccf1..41ab16564 100644 --- a/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Endpoint_UC3.h @@ -633,7 +633,7 @@ return *(USB_EndpointFIFOPos[USB_SelectedEndpoint]++);
}
- /** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints.
+ /** Writes one byte to the currently selected endpoint's bank, for IN direction endpoints.
*
* \ingroup Group_EndpointPrimitiveRW_UC3
*
diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h index b6f015c11..c10518548 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -614,7 +614,7 @@ return *(USB_PipeFIFOPos[USB_SelectedPipe]++);
}
- /** Writes one byte from the currently selected pipe's bank, for IN direction pipes.
+ /** Writes one byte to the currently selected pipe's bank, for IN direction pipes.
*
* \ingroup Group_PipePrimitiveRW_UC3
*
diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h index 9c72e3856..958eeea35 100644 --- a/LUFA/Drivers/USB/USB.h +++ b/LUFA/Drivers/USB/USB.h @@ -176,7 +176,7 @@ * * To initialize the Class driver instance, the driver's <tt><i>{Class Name}</i>_Device_ConfigureEndpoints()</tt> function * should be called in response to the \ref EVENT_USB_Device_ConfigurationChanged() event. This function will return a - * boolean value if the driver successfully initialized the instance. Like all the class driver functions, this function + * boolean true value if the driver successfully initialized the instance. Like all the class driver functions, this function * takes in the address of the specific instance you wish to initialize - in this manner, multiple separate instances of * the same class type can be initialized like this: * |