diff options
Diffstat (limited to 'LUFA/Drivers')
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/DevChapter9.c | 43 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.c | 528 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 284 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.c | 370 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.h | 186 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_R.c | 27 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c | 39 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_RW.c | 76 | ||||
| -rw-r--r-- | LUFA/Drivers/USB/LowLevel/Template/Template_Pipe_RW.c | 78 |
9 files changed, 752 insertions, 879 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/DevChapter9.c b/LUFA/Drivers/USB/LowLevel/DevChapter9.c index feaabce46..f49f5b39b 100644 --- a/LUFA/Drivers/USB/LowLevel/DevChapter9.c +++ b/LUFA/Drivers/USB/LowLevel/DevChapter9.c @@ -241,47 +241,12 @@ static void USB_Device_GetDescriptor(void) #if defined(USE_RAM_DESCRIPTORS)
Endpoint_Write_Control_Stream_LE(DescriptorPointer, DescriptorSize);
+ #elif defined(USE_EEPROM_DESCRIPTORS)
+ Endpoint_Write_Control_EStream_LE(DescriptorPointer, DescriptorSize);
#else
- bool SendZLP;
-
- if (USB_ControlRequest.wLength > DescriptorSize)
- USB_ControlRequest.wLength = DescriptorSize;
-
- while (USB_ControlRequest.wLength)
- {
- while (!(Endpoint_IsINReady()))
- {
- if (Endpoint_IsOUTReceived())
- {
- Endpoint_ClearOUT();
- return;
- }
- }
-
- while (USB_ControlRequest.wLength && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
- {
- #if defined (USE_EEPROM_DESCRIPTORS)
- Endpoint_Write_Byte(eeprom_read_byte(DescriptorPointer++));
- #else
- Endpoint_Write_Byte(pgm_read_byte(DescriptorPointer++));
- #endif
-
- USB_ControlRequest.wLength--;
- }
-
- SendZLP = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearIN();
- }
-
- if (SendZLP)
- {
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- }
-
- while (!(Endpoint_IsOUTReceived()));
+ Endpoint_Write_Control_PStream_LE(DescriptorPointer, DescriptorSize);
#endif
-
+
Endpoint_ClearOUT();
}
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.c b/LUFA/Drivers/USB/LowLevel/Endpoint.c index 1ff66ddfa..f9db9cd22 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.c +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.c @@ -183,428 +183,116 @@ uint8_t Endpoint_Discard_Stream(uint16_t Length return ENDPOINT_RWSTREAM_NoError;
}
-uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)Buffer;
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- Endpoint_Write_Byte(*(DataStream++));
- case 7: Endpoint_Write_Byte(*(DataStream++));
- case 6: Endpoint_Write_Byte(*(DataStream++));
- case 5: Endpoint_Write_Byte(*(DataStream++));
- case 4: Endpoint_Write_Byte(*(DataStream++));
- case 3: Endpoint_Write_Byte(*(DataStream++));
- case 2: Endpoint_Write_Byte(*(DataStream++));
- case 1: Endpoint_Write_Byte(*(DataStream++));
- } while (Length >= 8);
- }
- }
- #endif
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_LE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_LE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_LE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr++))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Stream_BE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_EStream_BE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_PStream_BE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr--))
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_LE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_LE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Stream_BE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_RW.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_EStream_BE
+#define TEMPLATE_CLEAR_ENDPOINT() Endpoint_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_RW.c"
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Write_Byte(*(DataStream++));
- Length--;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- Endpoint_Write_Byte(*(DataStream--));
- case 7: Endpoint_Write_Byte(*(DataStream--));
- case 6: Endpoint_Write_Byte(*(DataStream--));
- case 5: Endpoint_Write_Byte(*(DataStream--));
- case 4: Endpoint_Write_Byte(*(DataStream--));
- case 3: Endpoint_Write_Byte(*(DataStream--));
- case 2: Endpoint_Write_Byte(*(DataStream--));
- case 1: Endpoint_Write_Byte(*(DataStream--));
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Endpoint_Write_Byte(*(DataStream--));
- Length--;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)Buffer;
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- Length -= 8;
-
- *(DataStream++) = Endpoint_Read_Byte();
- case 7: *(DataStream++) = Endpoint_Read_Byte();
- case 6: *(DataStream++) = Endpoint_Read_Byte();
- case 5: *(DataStream++) = Endpoint_Read_Byte();
- case 4: *(DataStream++) = Endpoint_Read_Byte();
- case 3: *(DataStream++) = Endpoint_Read_Byte();
- case 2: *(DataStream++) = Endpoint_Read_Byte();
- case 1: *(DataStream++) = Endpoint_Read_Byte();
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- *(DataStream++) = Endpoint_Read_Byte();
- Length--;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-
-uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
- uint8_t ErrorCode;
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- *(DataStream--) = Endpoint_Read_Byte();
- case 7: *(DataStream--) = Endpoint_Read_Byte();
- case 6: *(DataStream--) = Endpoint_Read_Byte();
- case 5: *(DataStream--) = Endpoint_Read_Byte();
- case 4: *(DataStream--) = Endpoint_Read_Byte();
- case 3: *(DataStream--) = Endpoint_Read_Byte();
- case 2: *(DataStream--) = Endpoint_Read_Byte();
- case 1: *(DataStream--) = Endpoint_Read_Byte();
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Endpoint_IsReadWriteAllowed()))
- {
- Endpoint_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return ENDPOINT_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Endpoint_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- *(DataStream--) = Endpoint_Read_Byte();
- Length--;
- }
- }
-
- return ENDPOINT_RWSTREAM_NoError;
-}
-#endif
-
-uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length)
-{
- uint8_t* DataStream = (uint8_t*)Buffer;
- bool LastPacketFull = false;
-
- if (Length > USB_ControlRequest.wLength)
- Length = USB_ControlRequest.wLength;
-
- while (Length && !(Endpoint_IsOUTReceived()))
- {
- while (!(Endpoint_IsINReady()));
-
- while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
- {
- Endpoint_Write_Byte(*(DataStream++));
- Length--;
- }
-
- LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearIN();
- }
-
- if (Endpoint_IsOUTReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
-
- if (LastPacketFull)
- {
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- }
-
- while (!(Endpoint_IsOUTReceived()));
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length)
-{
- uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
- bool LastPacketFull = false;
-
- if (Length > USB_ControlRequest.wLength)
- Length = USB_ControlRequest.wLength;
-
- while (Length && !(Endpoint_IsOUTReceived()))
- {
- if (Endpoint_IsINReady())
- {
- while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
- {
- Endpoint_Write_Byte(*(DataStream--));
- Length--;
- }
-
- LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
- Endpoint_ClearIN();
- }
- }
-
- if (Endpoint_IsOUTReceived())
- return ENDPOINT_RWCSTREAM_HostAborted;
-
- if (LastPacketFull)
- {
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- }
-
- while (!(Endpoint_IsOUTReceived()));
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length)
-{
- uint8_t* DataStream = (uint8_t*)Buffer;
-
- while (Length)
- {
- if (Endpoint_IsOUTReceived())
- {
- while (Length && Endpoint_BytesInEndpoint())
- {
- *(DataStream++) = Endpoint_Read_Byte();
- Length--;
- }
-
- Endpoint_ClearOUT();
- }
- }
-
- while (!(Endpoint_IsINReady()));
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
-
-uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length)
-{
- uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
-
- while (Length)
- {
- if (Endpoint_IsOUTReceived())
- {
- while (Length && Endpoint_BytesInEndpoint())
- {
- *(DataStream--) = Endpoint_Read_Byte();
- Length--;
- }
-
- Endpoint_ClearOUT();
- }
- }
-
- while (!(Endpoint_IsINReady()));
-
- return ENDPOINT_RWCSTREAM_NoError;
-}
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr++))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(*(BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_PStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(pgm_read_byte(BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Write_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Endpoint_Write_Byte(eeprom_read_byte(BufferPtr--))
+#include "Template/Template_Endpoint_Control_W.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_LE
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_Stream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Endpoint_Read_Byte()
+#include "Template/Template_Endpoint_Control_R.c"
+
+#define TEMPLATE_FUNC_NAME Endpoint_Read_Control_EStream_BE
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Endpoint_Read_Byte())
+#include "Template/Template_Endpoint_Control_R.c"
#endif
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index 772d1feed..2caea8343 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -43,6 +43,20 @@ * Functions, macros, variables, enums and types related to data reading and writing from and to endpoints.
*/
+/** \ingroup Group_EndpointRW
+ * @defgroup Group_EndpointPrimitiveRW Read/Write of Primitive Data Types
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
+ * from and to endpoints.
+ */
+
+/** \ingroup Group_EndpointRW
+ * @defgroup Group_EndpointStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to endpoints.
+ */
+
/** @defgroup Group_EndpointPacketManagement Endpoint Packet Management
*
* Functions, macros, variables, enums and types related to packet management of endpoints.
@@ -53,6 +67,8 @@ /* Includes: */
#include <avr/io.h>
+ #include <avr/pgmspace.h>
+ #include <avr/eeprom.h>
#include <stdbool.h>
#include "../../../Common/Common.h"
@@ -407,7 +423,7 @@ /** Enum for the possible error return codes of the Endpoint_*_Stream_* functions.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*/
enum Endpoint_Stream_RW_ErrorCodes_t
{
@@ -429,7 +445,7 @@ /** Enum for the possible error return codes of the Endpoint_*_Control_Stream_* functions..
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*/
enum Endpoint_ControlStream_RW_ErrorCodes_t
{
@@ -440,7 +456,7 @@ /* Inline Functions: */
/** Reads one byte from the currently selected endpoint's bank, for OUT direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \return Next byte in the currently selected endpoint's FIFO buffer
*/
@@ -452,7 +468,7 @@ /** Writes one byte from the currently selected endpoint's bank, for IN direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Byte Next byte to write into the the currently selected endpoint's FIFO buffer
*/
@@ -464,7 +480,7 @@ /** Discards one byte from the currently selected endpoint's bank, for OUT direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Byte(void)
@@ -477,7 +493,7 @@ /** Reads two bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \return Next word in the currently selected endpoint's FIFO buffer
*/
@@ -495,7 +511,7 @@ /** Reads two bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \return Next word in the currently selected endpoint's FIFO buffer
*/
@@ -513,7 +529,7 @@ /** Writes two bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer
*/
@@ -527,7 +543,7 @@ /** Writes two bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \param[in] Word Next word to write to the currently selected endpoint's FIFO buffer
*/
@@ -540,7 +556,7 @@ /** Discards two bytes from the currently selected endpoint's bank, for OUT direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_Word(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_Word(void)
@@ -554,7 +570,7 @@ /** Reads four bytes from the currently selected endpoint's bank in little endian format, for OUT
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \return Next double word in the currently selected endpoint's FIFO buffer
*/
@@ -578,7 +594,7 @@ /** Reads four bytes from the currently selected endpoint's bank in big endian format, for OUT
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \return Next double word in the currently selected endpoint's FIFO buffer
*/
@@ -602,7 +618,7 @@ /** Writes four bytes to the currently selected endpoint's bank in little endian format, for IN
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer
*/
@@ -618,7 +634,7 @@ /** Writes four bytes to the currently selected endpoint's bank in big endian format, for IN
* direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected endpoint's FIFO buffer
*/
@@ -633,7 +649,7 @@ /** Discards four bytes from the currently selected endpoint's bank, for OUT direction endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointPrimitiveRW
*/
static inline void Endpoint_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Endpoint_Discard_DWord(void)
@@ -669,6 +685,12 @@ #endif
/* Function Prototypes: */
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #define _CALLBACK_PARAM , StreamCallbackPtr_t Callback
+ #else
+ #define _CALLBACK_PARAM
+ #endif
+
/** Configures the specified endpoint number with the given endpoint type, direction, bank size
* and banking mode. Endpoints should be allocated in ascending order by their address in the
* device (i.e. endpoint 1 should be configured before endpoint 2 and so on) to prevent fragmentation
@@ -694,8 +716,6 @@ bool Endpoint_ConfigureEndpoint(const uint8_t Number, const uint8_t Type, const uint8_t Direction,
const uint16_t Size, const uint8_t Banks);
- #if !defined(CONTROL_ONLY_DEVICE)
-
/** Spinloops until the currently selected non-control endpoint is ready for the next packet of data
* to be read or written to it.
*
@@ -720,18 +740,14 @@ *
* \note This routine should not be used on CONTROL type endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Discard_Stream(uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- );
+ uint8_t Endpoint_Discard_Stream(uint16_t Length _CALLBACK_PARAM);
/** Writes the given number of bytes to the endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The last packet filled is not automatically sent;
@@ -746,7 +762,7 @@ *
* \note This routine should not be used on CONTROL type endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
@@ -754,11 +770,33 @@ *
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Write_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_LE.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_LE.
+ *
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The last packet filled is not automatically sent;
@@ -773,7 +811,7 @@ *
* \note This routine should not be used on CONTROL type endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
@@ -781,11 +819,33 @@ *
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Write_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Stream_BE.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Stream_BE.
+ *
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_PStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The last packet is not automatically
@@ -800,20 +860,28 @@ *
* \note This routine should not be used on CONTROL type endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
- * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_LE.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
/** Reads the given number of bytes from the endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The last packet is not automatically
* discarded once the remaining bytes has been read; the user is responsible for manually
@@ -827,7 +895,7 @@ *
* \note This routine should not be used on CONTROL type endpoints.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@@ -835,13 +903,19 @@ *
* \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
- #endif
+ /** EEPROM buffer source version of \ref Endpoint_Read_Stream_BE.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to, located in EEPROM memory space.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
@@ -853,14 +927,48 @@ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Write_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of Endpoint_Write_Control_Stream_LE.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_LE.
+ *
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,
* sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared
@@ -872,14 +980,48 @@ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
*
* \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
*/
- uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Endpoint_Write_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Endpoint_Write_Control_Stream_BE.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_EStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Endpoint_Write_Control_Stream_BE.
+ *
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected endpoint into the buffer.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Write_Control_PStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
@@ -891,7 +1033,7 @@ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@@ -900,6 +1042,22 @@ */
uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_LE.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,
* discarding fully read packets from the host as needed. The device IN acknowledgement is not
* automatically sent after success or failure states; the user is responsible for manually sending the
@@ -910,7 +1068,7 @@ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
* together; i.e. the entire stream data must be read or written at the one time.
*
- * \ingroup Group_EndpointRW
+ * \ingroup Group_EndpointStreamRW
*
* \param[out] Buffer Pointer to the destination data buffer to write to.
* \param[in] Length Number of bytes to send via the currently selected endpoint.
@@ -919,6 +1077,22 @@ */
uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+ /** EEPROM buffer source version of \ref Endpoint_Read_Control_Stream_BE.
+ *
+ * \note This routine should only be used on CONTROL type endpoints.
+ *
+ * \warning Unlike the standard stream read/write commands, the control stream commands cannot be chained
+ * together; i.e. the entire stream data must be read or written at the one time.
+ *
+ * \ingroup Group_EndpointStreamRW
+ *
+ * \param[out] Buffer Pointer to the destination data buffer to write to.
+ * \param[in] Length Number of bytes to send via the currently selected endpoint.
+ *
+ * \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Endpoint_Read_Control_EStream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);
+
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.c b/LUFA/Drivers/USB/LowLevel/Pipe.c index ab092796c..18fbc19b5 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.c +++ b/LUFA/Drivers/USB/LowLevel/Pipe.c @@ -106,162 +106,6 @@ uint8_t Pipe_WaitUntilReady(void) }
}
-uint8_t Pipe_Write_Stream_LE(const void* Data, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)Data;
- uint8_t ErrorCode;
-
- Pipe_SetToken(PIPE_TOKEN_OUT);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- Pipe_Write_Byte(*(DataStream++));
- case 7: Pipe_Write_Byte(*(DataStream++));
- case 6: Pipe_Write_Byte(*(DataStream++));
- case 5: Pipe_Write_Byte(*(DataStream++));
- case 4: Pipe_Write_Byte(*(DataStream++));
- case 3: Pipe_Write_Byte(*(DataStream++));
- case 2: Pipe_Write_Byte(*(DataStream++));
- case 1: Pipe_Write_Byte(*(DataStream++));
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Write_Byte(*(DataStream++));
- Length--;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t Pipe_Write_Stream_BE(const void* Data, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)(Data + Length - 1);
- uint8_t ErrorCode;
-
- Pipe_SetToken(PIPE_TOKEN_OUT);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- Pipe_Write_Byte(*(DataStream--));
- case 7: Pipe_Write_Byte(*(DataStream--));
- case 6: Pipe_Write_Byte(*(DataStream--));
- case 5: Pipe_Write_Byte(*(DataStream--));
- case 4: Pipe_Write_Byte(*(DataStream--));
- case 3: Pipe_Write_Byte(*(DataStream--));
- case 2: Pipe_Write_Byte(*(DataStream--));
- case 1: Pipe_Write_Byte(*(DataStream--));
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearOUT();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- Pipe_Write_Byte(*(DataStream--));
- Length--;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
uint8_t Pipe_Discard_Stream(uint16_t Length
#if !defined(NO_STREAM_CALLBACKS)
, StreamCallbackPtr_t Callback
@@ -339,160 +183,64 @@ uint8_t Pipe_Discard_Stream(uint16_t Length return PIPE_RWSTREAM_NoError;
}
-uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)Buffer;
- uint8_t ErrorCode;
-
- Pipe_SetToken(PIPE_TOKEN_IN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- *(DataStream++) = Pipe_Read_Byte();
- case 7: *(DataStream++) = Pipe_Read_Byte();
- case 6: *(DataStream++) = Pipe_Read_Byte();
- case 5: *(DataStream++) = Pipe_Read_Byte();
- case 4: *(DataStream++) = Pipe_Read_Byte();
- case 3: *(DataStream++) = Pipe_Read_Byte();
- case 2: *(DataStream++) = Pipe_Read_Byte();
- case 1: *(DataStream++) = Pipe_Read_Byte();
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- *(DataStream++) = Pipe_Read_Byte();
- Length--;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
-
-uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length
-#if !defined(NO_STREAM_CALLBACKS)
- , StreamCallbackPtr_t Callback
-#endif
- )
-{
- uint8_t* DataStream = (uint8_t*)(Buffer + Length - 1);
- uint8_t ErrorCode;
-
- Pipe_SetToken(PIPE_TOKEN_IN);
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
-
- #if defined(FAST_STREAM_TRANSFERS)
- uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
-
- if (Length >= 8)
- {
- Length -= BytesRemToAlignment;
-
- switch (BytesRemToAlignment)
- {
- default:
- do
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
-
- Length -= 8;
-
- *(DataStream--) = Pipe_Read_Byte();
- case 7: *(DataStream--) = Pipe_Read_Byte();
- case 6: *(DataStream--) = Pipe_Read_Byte();
- case 5: *(DataStream--) = Pipe_Read_Byte();
- case 4: *(DataStream--) = Pipe_Read_Byte();
- case 3: *(DataStream--) = Pipe_Read_Byte();
- case 2: *(DataStream--) = Pipe_Read_Byte();
- case 1: *(DataStream--) = Pipe_Read_Byte();
- } while (Length >= 8);
- }
- }
- #endif
-
- while (Length)
- {
- if (!(Pipe_IsReadWriteAllowed()))
- {
- Pipe_ClearIN();
-
- #if !defined(NO_STREAM_CALLBACKS)
- if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
- return PIPE_RWSTREAM_CallbackAborted;
- #endif
-
- if ((ErrorCode = Pipe_WaitUntilReady()))
- return ErrorCode;
- }
- else
- {
- *(DataStream--) = Pipe_Read_Byte();
- Length--;
- }
- }
-
- return PIPE_RWSTREAM_NoError;
-}
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_LE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*(BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_LE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_LE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr++))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_Stream_BE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(*(BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_PStream_BE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(pgm_read_byte(BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Write_EStream_BE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearOUT()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) Pipe_Write_Byte(eeprom_read_byte(BufferPtr--))
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_LE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr++) = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_LE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) 0
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr++, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_Stream_BE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) *(BufferPtr--) = Pipe_Read_Byte()
+#include "Template/Template_Pipe_RW.c"
+
+#define TEMPLATE_FUNC_NAME Pipe_Read_EStream_BE
+#define TEMPLATE_CLEAR_PIPE() Pipe_ClearIN()
+#define TEMPLATE_BUFFER_OFFSET(Length) Length - 1
+#define TEMPLATE_TRANSFER_BYTE(BufferPtr) eeprom_write_byte(BufferPtr--, Pipe_Read_Byte())
+#include "Template/Template_Pipe_RW.c"
#endif
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index cf61eeae0..363b9fd93 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -43,6 +43,20 @@ * Functions, macros, variables, enums and types related to data reading and writing from and to pipes.
*/
+/** \ingroup Group_PipeRW
+ * @defgroup Group_PipePrimitiveRW Read/Write of Primitive Data Types
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of primitive data types
+ * from and to pipes.
+ */
+
+/** \ingroup Group_PipeRW
+ * @defgroup Group_PipeStreamRW Read/Write of Multi-Byte Streams
+ *
+ * Functions, macros, variables, enums and types related to data reading and writing of data streams from
+ * and to pipes.
+ */
+
/** @defgroup Group_PipePacketManagement Pipe Packet Management
*
* Functions, macros, variables, enums and types related to packet management of pipes.
@@ -61,6 +75,8 @@ /* Includes: */
#include <avr/io.h>
+ #include <avr/pgmspace.h>
+ #include <avr/eeprom.h>
#include <stdbool.h>
#include "../../../Common/Common.h"
@@ -502,7 +518,7 @@ /* Inline Functions: */
/** Reads one byte from the currently selected pipe's bank, for OUT direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \return Next byte in the currently selected pipe's FIFO buffer
*/
@@ -514,7 +530,7 @@ /** Writes one byte from the currently selected pipe's bank, for IN direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \param[in] Byte Next byte to write into the the currently selected pipe's FIFO buffer
*/
@@ -526,7 +542,7 @@ /** Discards one byte from the currently selected pipe's bank, for OUT direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_Byte(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_Byte(void)
@@ -539,7 +555,7 @@ /** Reads two bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \return Next word in the currently selected pipe's FIFO buffer
*/
@@ -557,7 +573,7 @@ /** Reads two bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \return Next word in the currently selected pipe's FIFO buffer
*/
@@ -575,7 +591,7 @@ /** Writes two bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \param[in] Word Next word to write to the currently selected pipe's FIFO buffer
*/
@@ -589,7 +605,7 @@ /** Writes two bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \param[in] Word Next word to write to the currently selected pipe's FIFO buffer
*/
@@ -602,7 +618,7 @@ /** Discards two bytes from the currently selected pipe's bank, for OUT direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_Word(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_Word(void)
@@ -616,7 +632,7 @@ /** Reads four bytes from the currently selected pipe's bank in little endian format, for OUT
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \return Next double word in the currently selected pipe's FIFO buffer
*/
@@ -640,7 +656,7 @@ /** Reads four bytes from the currently selected pipe's bank in big endian format, for OUT
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \return Next double word in the currently selected pipe's FIFO buffer
*/
@@ -664,7 +680,7 @@ /** Writes four bytes to the currently selected pipe's bank in little endian format, for IN
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer
*/
@@ -678,7 +694,7 @@ /** Writes four bytes to the currently selected pipe's bank in big endian format, for IN
* direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*
* \param[in] DWord Next double word to write to the currently selected pipe's FIFO buffer
*/
@@ -691,7 +707,7 @@ /** Discards four bytes from the currently selected pipe's bank, for OUT direction pipes.
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipePrimitiveRW
*/
static inline void Pipe_Discard_DWord(void) ATTR_ALWAYS_INLINE;
static inline void Pipe_Discard_DWord(void)
@@ -716,6 +732,12 @@ extern uint8_t USB_ControlPipeSize;
/* Function Prototypes: */
+ #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
+ #define _CALLBACK_PARAM , StreamCallbackPtr_t Callback
+ #else
+ #define _CALLBACK_PARAM
+ #endif
+
/** Configures the specified pipe number with the given pipe type, token, target endpoint number in the
* attached device, bank size and banking mode. Pipes should be allocated in ascending order by their
* address in the device (i.e. pipe 1 should be configured before pipe 2 and so on) to prevent fragmentation
@@ -756,6 +778,28 @@ */
uint8_t Pipe_WaitUntilReady(void);
+ /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
+ * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
+ * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
+ * Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,
+ * allowing for early aborts of stream transfers.
+ *
+ * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
+ * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
+ * disabled and this function has the Callback parameter omitted.
+ *
+ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
+ * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[in] Length Number of bytes to send via the currently selected pipe.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Discard_Stream(uint16_t Length _CALLBACK_PARAM);
+
/** Writes the given number of bytes to the pipe from the given buffer in little endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
* the user is responsible for manually sending the last written packet to the host via the
@@ -769,7 +813,7 @@ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
@@ -777,12 +821,34 @@ *
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Pipe_Write_Stream_LE(const void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Pipe_Write_Stream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_LE.
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_LE.
+ *
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_PStream_LE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
/** Writes the given number of bytes to the pipe from the given buffer in big endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
* the user is responsible for manually sending the last written packet to the host via the
@@ -796,7 +862,7 @@ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipeStreamRW
*
* \param[in] Buffer Pointer to the source data buffer to read from.
* \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
@@ -804,37 +870,33 @@ *
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Pipe_Write_Stream_BE(const void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Pipe_Write_Stream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
- /** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host
- * as needed. The last packet is not automatically discarded once the remaining bytes has been read; the
- * user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.
- * Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,
- * allowing for early aborts of stream transfers.
+ /** EEPROM buffer source version of \ref Pipe_Write_Stream_BE.
*
- * The callback routine should be created according to the information in \ref Group_StreamCallbacks.
- * If the token NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are
- * disabled and this function has the Callback parameter omitted.
+ * \ingroup Group_PipeStreamRW
*
- * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
- * having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
- * \ingroup Group_PipeRW
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Write_EStream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** FLASH buffer source version of \ref Pipe_Write_Stream_BE.
*
- * \param[in] Length Number of bytes to send via the currently selected pipe.
+ * \note The FLASH data must be located in the first 64KB of FLASH for this function to work correctly.
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[in] Buffer Pointer to the source data buffer to read from.
+ * \param[in] Length Number of bytes to read for the currently selected pipe into the buffer.
* \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
*
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Pipe_Discard_Stream(uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- );
+ uint8_t Pipe_Write_PStream_BE(const void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the pipe into the given buffer in little endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
@@ -849,7 +911,7 @@ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
@@ -857,11 +919,19 @@ *
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_LE.
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_LE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
/** Reads the given number of bytes from the pipe into the given buffer in big endian,
* sending full packets to the device as needed. The last packet filled is not automatically sent;
@@ -876,7 +946,7 @@ * The pipe token is set automatically, thus this can be used on bi-directional pipes directly without
* having to explicitly change the data direction with a call to \ref Pipe_SetPipeToken().
*
- * \ingroup Group_PipeRW
+ * \ingroup Group_PipeStreamRW
*
* \param[out] Buffer Pointer to the source data buffer to write to.
* \param[in] Length Number of bytes to read for the currently selected pipe to read from.
@@ -884,12 +954,20 @@ *
* \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
*/
- uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length
- #if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)
- , StreamCallbackPtr_t Callback
- #endif
- ) ATTR_NON_NULL_PTR_ARG(1);
+ uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+ /** EEPROM buffer source version of \ref Pipe_Read_Stream_BE.
+ *
+ * \ingroup Group_PipeStreamRW
+ *
+ * \param[out] Buffer Pointer to the source data buffer to write to.
+ * \param[in] Length Number of bytes to read for the currently selected pipe to read from.
+ * \param[in] Callback Name of a callback routine to call between successive USB packet transfers, NULL if no callback
+ *
+ * \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.
+ */
+ uint8_t Pipe_Read_EStream_BE(void* Buffer, uint16_t Length _CALLBACK_PARAM) ATTR_NON_NULL_PTR_ARG(1);
+
/* Private Interface - For use in library only: */
#if !defined(__DOXYGEN__)
/* Macros: */
diff --git a/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_R.c b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_R.c new file mode 100644 index 000000000..d66edafd6 --- /dev/null +++ b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_R.c @@ -0,0 +1,27 @@ +uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length)
+{
+ uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
+
+ while (Length)
+ {
+ if (Endpoint_IsOUTReceived())
+ {
+ while (Length && Endpoint_BytesInEndpoint())
+ {
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ Length--;
+ }
+
+ Endpoint_ClearOUT();
+ }
+ }
+
+ while (!(Endpoint_IsINReady()));
+
+ return ENDPOINT_RWCSTREAM_NoError;
+}
+
+
+#undef TEMPLATE_BUFFER_OFFSET
+#undef TEMPLATE_FUNC_NAME
+#undef TEMPLATE_TRANSFER_BYTE
\ No newline at end of file diff --git a/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c new file mode 100644 index 000000000..2796c6425 --- /dev/null +++ b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_Control_W.c @@ -0,0 +1,39 @@ +uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length)
+{
+ uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
+ bool LastPacketFull = false;
+
+ if (Length > USB_ControlRequest.wLength)
+ Length = USB_ControlRequest.wLength;
+
+ while (Length && !(Endpoint_IsOUTReceived()))
+ {
+ while (!(Endpoint_IsINReady()));
+
+ while (Length && (Endpoint_BytesInEndpoint() < USB_ControlEndpointSize))
+ {
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ Length--;
+ }
+
+ LastPacketFull = (Endpoint_BytesInEndpoint() == USB_ControlEndpointSize);
+ Endpoint_ClearIN();
+ }
+
+ if (Endpoint_IsOUTReceived())
+ return ENDPOINT_RWCSTREAM_HostAborted;
+
+ if (LastPacketFull)
+ {
+ while (!(Endpoint_IsINReady()));
+ Endpoint_ClearIN();
+ }
+
+ while (!(Endpoint_IsOUTReceived()));
+
+ return ENDPOINT_RWCSTREAM_NoError;
+}
+
+#undef TEMPLATE_BUFFER_OFFSET
+#undef TEMPLATE_FUNC_NAME
+#undef TEMPLATE_TRANSFER_BYTE
\ No newline at end of file diff --git a/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_RW.c b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_RW.c new file mode 100644 index 000000000..731c5f8ff --- /dev/null +++ b/LUFA/Drivers/USB/LowLevel/Template/Template_Endpoint_RW.c @@ -0,0 +1,76 @@ +uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length _CALLBACK_PARAM)
+{
+ uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
+ uint8_t ErrorCode;
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+
+ #if defined(FAST_STREAM_TRANSFERS)
+ uint8_t BytesRemToAlignment = (Endpoint_BytesInEndpoint() & 0x07);
+
+ if (Length >= 8)
+ {
+ Length -= BytesRemToAlignment;
+
+ switch (BytesRemToAlignment)
+ {
+ default:
+ do
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ TEMPLATE_CLEAR_ENDPOINT();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return ENDPOINT_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+
+ Length -= 8;
+
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 7: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 6: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 5: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 4: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 3: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 2: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 1: TEMPLATE_TRANSFER_BYTE(DataStream);
+ } while (Length >= 8);
+ }
+ }
+ #endif
+
+ while (Length)
+ {
+ if (!(Endpoint_IsReadWriteAllowed()))
+ {
+ TEMPLATE_CLEAR_ENDPOINT();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return ENDPOINT_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Endpoint_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ Length--;
+ }
+ }
+
+ return ENDPOINT_RWSTREAM_NoError;
+}
+
+#undef TEMPLATE_FUNC_NAME
+#undef TEMPLATE_TRANSFER_BYTE
+#undef TEMPLATE_CLEAR_ENDPOINT
+#undef TEMPLATE_BUFFER_OFFSET
\ No newline at end of file diff --git a/LUFA/Drivers/USB/LowLevel/Template/Template_Pipe_RW.c b/LUFA/Drivers/USB/LowLevel/Template/Template_Pipe_RW.c new file mode 100644 index 000000000..f36f82da5 --- /dev/null +++ b/LUFA/Drivers/USB/LowLevel/Template/Template_Pipe_RW.c @@ -0,0 +1,78 @@ +uint8_t TEMPLATE_FUNC_NAME (void* Buffer, uint16_t Length _CALLBACK_PARAM)
+{
+ uint8_t* DataStream = (uint8_t*)(Buffer + TEMPLATE_BUFFER_OFFSET(Length));
+ uint8_t ErrorCode;
+
+ Pipe_SetToken(PIPE_TOKEN_IN);
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+
+ #if defined(FAST_STREAM_TRANSFERS)
+ uint8_t BytesRemToAlignment = (Pipe_BytesInPipe() & 0x07);
+
+ if (Length >= 8)
+ {
+ Length -= BytesRemToAlignment;
+
+ switch (BytesRemToAlignment)
+ {
+ default:
+ do
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ TEMPLATE_CLEAR_PIPE();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return PIPE_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+
+ Length -= 8;
+
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 7: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 6: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 5: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 4: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 3: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 2: TEMPLATE_TRANSFER_BYTE(DataStream);
+ case 1: TEMPLATE_TRANSFER_BYTE(DataStream);
+ } while (Length >= 8);
+ }
+ }
+ #endif
+
+ while (Length)
+ {
+ if (!(Pipe_IsReadWriteAllowed()))
+ {
+ TEMPLATE_CLEAR_PIPE();
+
+ #if !defined(NO_STREAM_CALLBACKS)
+ if ((Callback != NULL) && (Callback() == STREAMCALLBACK_Abort))
+ return PIPE_RWSTREAM_CallbackAborted;
+ #endif
+
+ if ((ErrorCode = Pipe_WaitUntilReady()))
+ return ErrorCode;
+ }
+ else
+ {
+ TEMPLATE_TRANSFER_BYTE(DataStream);
+ Length--;
+ }
+ }
+
+ return PIPE_RWSTREAM_NoError;
+}
+
+#undef TEMPLATE_FUNC_NAME
+#undef TEMPLATE_TRANSFER_BYTE
+#undef TEMPLATE_CLEAR_PIPE
+#undef TEMPLATE_BUFFER_OFFSET
\ No newline at end of file |