diff options
Diffstat (limited to 'LUFA/Drivers/USB')
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/Endpoint.h | 37 | ||||
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/HostChapter9.c | 2 | ||||
-rw-r--r-- | LUFA/Drivers/USB/LowLevel/Pipe.h | 36 |
3 files changed, 1 insertions, 74 deletions
diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h index aa5005a82..4882acc3b 100644 --- a/LUFA/Drivers/USB/LowLevel/Endpoint.h +++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h @@ -153,34 +153,6 @@ * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
*/
#define ENDPOINT_INT_SETUP UEIENX, (1 << RXSTPE), UEINTX, (1 << RXSTPI)
-
- /** Interrupt definition for the endpoint IN interrupt (for INTERRUPT type endpoints). Should be
- * used with the USB_INT_* macros located in USBInterrupt.h.
- *
- * This interrupt will fire if enabled on an INTERRUPT type endpoint if a the endpoint interrupt
- * period has elapsed and the endpoint is ready for a new packet to be written to its FIFO buffer
- * (if required).
- *
- * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the
- * endpoint is selected), and will fire the common endpoint interrupt vector.
- *
- * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
- */
- #define ENDPOINT_INT_IN UEIENX, (1 << TXINE) , UEINTX, (1 << TXINI)
-
- /** Interrupt definition for the endpoint OUT interrupt (for INTERRUPT type endpoints). Should be
- * used with the USB_INT_* macros located in USBInterrupt.h.
- *
- * This interrupt will fire if enabled on an INTERRUPT type endpoint if a the endpoint interrupt
- * period has elapsed and the endpoint is ready for a packet from the host to be read from its
- * FIFO buffer (if received).
- *
- * \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the
- * endpoint is selected), and will fire the common endpoint interrupt vector.
- *
- * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
- */
- #define ENDPOINT_INT_OUT UEIENX, (1 << RXOUTE), UEINTX, (1 << RXOUTI)
/* Pseudo-Function Macros: */
#if defined(__DOXYGEN__)
@@ -265,13 +237,6 @@ */
static inline uint8_t Endpoint_GetEndpointInterrupts(void);
- /** Clears the endpoint interrupt flag. This clears the specified endpoint number's interrupt
- * mask in the endpoint interrupt flag register.
- *
- * \param EndpointNumber Index of the endpoint whose interrupt flag should be cleared
- */
- static inline void Endpoint_ClearEndpointInterrupt(uint8_t EndpointNumber);
-
/** Determines if the specified endpoint number has interrupted (valid only for INTERRUPT type
* endpoints).
*
@@ -398,8 +363,6 @@ #define Endpoint_GetEndpointInterrupts() UEINT
- #define Endpoint_ClearEndpointInterrupt(n) MACROS{ UEINT &= ~(1 << n); }MACROE
-
#define Endpoint_HasEndpointInterrupted(n) ((UEINT & (1 << n)) ? true : false)
#define Endpoint_IsINReady() ((UEINTX & (1 << TXINI)) ? true : false)
diff --git a/LUFA/Drivers/USB/LowLevel/HostChapter9.c b/LUFA/Drivers/USB/LowLevel/HostChapter9.c index ee51cf3ae..4b96c691d 100644 --- a/LUFA/Drivers/USB/LowLevel/HostChapter9.c +++ b/LUFA/Drivers/USB/LowLevel/HostChapter9.c @@ -155,7 +155,7 @@ static uint8_t USB_Host_Wait_For_Setup_IOS(const uint8_t WaitType) {
uint16_t TimeoutCounter = USB_HOST_TIMEOUT_MS;
- while (!(((WaitType == USB_HOST_WAITFOR_SetupSent) && Pipe_IsSETUPSent()) ||
+ while (!(((WaitType == USB_HOST_WAITFOR_SetupSent) && Pipe_IsSETUPSent()) ||
((WaitType == USB_HOST_WAITFOR_InReceived) && Pipe_IsINReceived()) ||
((WaitType == USB_HOST_WAITFOR_OutReady) && Pipe_IsOUTReady())))
{
diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h index 7e81cf686..d5c209492 100644 --- a/LUFA/Drivers/USB/LowLevel/Pipe.h +++ b/LUFA/Drivers/USB/LowLevel/Pipe.h @@ -158,34 +158,6 @@ */
#define PIPE_EPSIZE_MASK 0x7FF
- /** Interrupt definition for the pipe IN interrupt (for INTERRUPT type pipes). Should be used with
- * the USB_INT_* macros located in USBInterrupt.h.
- *
- * This interrupt will fire if enabled on an INTERRUPT type pipe if the pipe interrupt period has
- * elapsed and the pipe is ready for the next packet from the attached device to be read out from its
- * FIFO buffer (if received).
- *
- * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
- * is selected), and will fire the common pipe interrupt vector.
- *
- * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
- */
- #define PIPE_INT_IN UPIENX, (1 << RXINE) , UPINTX, (1 << RXINI)
-
- /** Interrupt definition for the pipe OUT interrupt (for INTERRUPT type pipes). Should be used with
- * the USB_INT_* macros located in USBInterrupt.h.
- *
- * This interrupt will fire if enabled on an INTERRUPT type endpoint if a the pipe interrupt period
- * has elapsed and the pipe is ready for a packet to be written to the pipe's FIFO buffer and sent
- * to the attached device (if required).
- *
- * \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe
- * is selected), and will fire the common pipe interrupt vector.
- *
- * \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.
- */
- #define PIPE_INT_OUT UPIENX, (1 << TXOUTE), UPINTX, (1 << TXOUTI)
-
/** Interrupt definition for the pipe SETUP bank ready interrupt (for CONTROL type pipes). Should be
* used with the USB_INT_* macros located in USBInterrupt.h.
*
@@ -337,12 +309,6 @@ */
static inline uint8_t Pipe_GetPipeInterrupts(void);
- /** Clears the interrupt flag for the specified pipe number.
- *
- * \param PipeNumber Index of the pipe whose interrupt flag is to be cleared
- */
- static inline void Pipe_ClearPipeInterrupt(uint8_t PipeNumber);
-
/** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type
* pipes).
*
@@ -504,8 +470,6 @@ #define Pipe_GetPipeInterrupts() UPINT
- #define Pipe_ClearPipeInterrupt(n) MACROS{ UPINT &= ~(1 << n); }MACROE
-
#define Pipe_HasPipeInterrupted(n) ((UPINT & (1 << n)) ? true : false)
#define Pipe_Unfreeze() MACROS{ UPCONX &= ~(1 << PFREEZE); }MACROE
|