diff options
Diffstat (limited to 'LUFA/Drivers/USB/Class/Common/SCSICodes.h')
| -rw-r--r-- | LUFA/Drivers/USB/Class/Common/SCSICodes.h | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/LUFA/Drivers/USB/Class/Common/SCSICodes.h b/LUFA/Drivers/USB/Class/Common/SCSICodes.h deleted file mode 100644 index 2b2213de2..000000000 --- a/LUFA/Drivers/USB/Class/Common/SCSICodes.h +++ /dev/null @@ -1,85 +0,0 @@ -/*
- LUFA Library
- Copyright (C) Dean Camera, 2009.
-
- dean [at] fourwalledcubicle [dot] com
- www.fourwalledcubicle.com
-*/
-
-/*
- Copyright 2009 Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
- Permission to use, copy, modify, and distribute this software
- and its documentation for any purpose and without fee is hereby
- granted, provided that the above copyright notice appear in all
- copies and that both that the copyright notice and this
- permission notice and warranty disclaimer appear in supporting
- documentation, and that the name of the author not be used in
- advertising or publicity pertaining to distribution of the
- software without specific, written prior permission.
-
- The author disclaim all warranties with regard to this
- software, including all implied warranties of merchantability
- and fitness. In no event shall the author be liable for any
- special, indirect or consequential damages or any damages
- whatsoever resulting from loss of use, data or profits, whether
- in an action of contract, negligence or other tortious action,
- arising out of or in connection with the use or performance of
- this software.
-*/
-
-/** \file
- *
- * Header containing macros for possible SCSI commands and SENSE data. Refer to
- * the SCSI standard documentation for more information on each SCSI command and
- * the SENSE data.
- */
-
-#ifndef _SCSI_CODES_H_
-#define _SCSI_CODES_H_
-
- /* Macros: */
- #define SCSI_CMD_INQUIRY 0x12
- #define SCSI_CMD_REQUEST_SENSE 0x03
- #define SCSI_CMD_TEST_UNIT_READY 0x00
- #define SCSI_CMD_READ_CAPACITY_10 0x25
- #define SCSI_CMD_SEND_DIAGNOSTIC 0x1D
- #define SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1E
- #define SCSI_CMD_WRITE_10 0x2A
- #define SCSI_CMD_READ_10 0x28
- #define SCSI_CMD_WRITE_6 0x0A
- #define SCSI_CMD_READ_6 0x08
- #define SCSI_CMD_VERIFY_10 0x2F
- #define SCSI_CMD_MODE_SENSE_6 0x1A
- #define SCSI_CMD_MODE_SENSE_10 0x5A
-
- #define SCSI_SENSE_KEY_GOOD 0x00
- #define SCSI_SENSE_KEY_RECOVERED_ERROR 0x01
- #define SCSI_SENSE_KEY_NOT_READY 0x02
- #define SCSI_SENSE_KEY_MEDIUM_ERROR 0x03
- #define SCSI_SENSE_KEY_HARDWARE_ERROR 0x04
- #define SCSI_SENSE_KEY_ILLEGAL_REQUEST 0x05
- #define SCSI_SENSE_KEY_UNIT_ATTENTION 0x06
- #define SCSI_SENSE_KEY_DATA_PROTECT 0x07
- #define SCSI_SENSE_KEY_BLANK_CHECK 0x08
- #define SCSI_SENSE_KEY_VENDOR_SPECIFIC 0x09
- #define SCSI_SENSE_KEY_COPY_ABORTED 0x0A
- #define SCSI_SENSE_KEY_ABORTED_COMMAND 0x0B
- #define SCSI_SENSE_KEY_VOLUME_OVERFLOW 0x0D
- #define SCSI_SENSE_KEY_MISCOMPARE 0x0E
-
- #define SCSI_ASENSE_NO_ADDITIONAL_INFORMATION 0x00
- #define SCSI_ASENSE_LOGICAL_UNIT_NOT_READY 0x04
- #define SCSI_ASENSE_INVALID_FIELD_IN_CDB 0x24
- #define SCSI_ASENSE_WRITE_PROTECTED 0x27
- #define SCSI_ASENSE_FORMAT_ERROR 0x31
- #define SCSI_ASENSE_INVALID_COMMAND 0x20
- #define SCSI_ASENSE_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x21
- #define SCSI_ASENSE_MEDIUM_NOT_PRESENT 0x3A
-
- #define SCSI_ASENSEQ_NO_QUALIFIER 0x00
- #define SCSI_ASENSEQ_FORMAT_COMMAND_FAILED 0x01
- #define SCSI_ASENSEQ_INITIALIZING_COMMAND_REQUIRED 0x02
- #define SCSI_ASENSEQ_OPERATION_IN_PROGRESS 0x07
-
-#endif
|