diff options
Diffstat (limited to 'Demos')
61 files changed, 148 insertions, 148 deletions
diff --git a/Demos/Device/AudioInput/Descriptors.c b/Demos/Device/AudioInput/Descriptors.c index 7a3e42883..95b2906e8 100644 --- a/Demos/Device/AudioInput/Descriptors.c +++ b/Demos/Device/AudioInput/Descriptors.c @@ -267,7 +267,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/AudioInput/Descriptors.h b/Demos/Device/AudioInput/Descriptors.h index cc0074980..5c5d9a686 100644 --- a/Demos/Device/AudioInput/Descriptors.h +++ b/Demos/Device/AudioInput/Descriptors.h @@ -183,7 +183,7 @@ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */
uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */
- uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each seperate audio channel */
+ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */
uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */
} USB_AudioFeatureUnit_t;
@@ -202,7 +202,7 @@ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals
* such as the speaker and microphone of a phone handset
*/
- uint8_t TotalChannels; /**< Total number of seperate audio channels within this interface (right, left, etc.) */
+ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */
uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */
diff --git a/Demos/Device/AudioOutput/AudioOutput.c b/Demos/Device/AudioOutput/AudioOutput.c index 0f390f001..855edf68c 100644 --- a/Demos/Device/AudioOutput/AudioOutput.c +++ b/Demos/Device/AudioOutput/AudioOutput.c @@ -236,7 +236,7 @@ TASK(USB_Audio_Task) /* Clear the sample reload timer */
TIFR0 |= (1 << OCF0A);
- /* Retreive the signed 16-bit left and right audio samples */
+ /* Retrieve the signed 16-bit left and right audio samples */
int16_t LeftSample_16Bit = (int16_t)Endpoint_Read_Word_LE();
int16_t RightSample_16Bit = (int16_t)Endpoint_Read_Word_LE();
diff --git a/Demos/Device/AudioOutput/Descriptors.c b/Demos/Device/AudioOutput/Descriptors.c index 169e534ba..30af5e851 100644 --- a/Demos/Device/AudioOutput/Descriptors.c +++ b/Demos/Device/AudioOutput/Descriptors.c @@ -267,7 +267,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/AudioOutput/Descriptors.h b/Demos/Device/AudioOutput/Descriptors.h index 99f10d648..1964b742c 100644 --- a/Demos/Device/AudioOutput/Descriptors.h +++ b/Demos/Device/AudioOutput/Descriptors.h @@ -183,7 +183,7 @@ uint8_t SourceID; /**< Source ID value of the audio source input into this feature unit */
uint8_t ControlSize; /**< Size of each element in the ChanelControlls array */
- uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each seperate audio channel */
+ uint8_t ChannelControls[3]; /**< Feature masks for the control channel, and each separate audio channel */
uint8_t FeatureUnitStrIndex; /**< Index of a string descriptor describing this descriptor within the device */
} USB_AudioFeatureUnit_t;
@@ -202,7 +202,7 @@ uint8_t AssociatedOutputTerminal; /**< ID of associated output terminal, for physically grouped terminals
* such as the speaker and microphone of a phone handset
*/
- uint8_t TotalChannels; /**< Total number of seperate audio channels within this interface (right, left, etc.) */
+ uint8_t TotalChannels; /**< Total number of separate audio channels within this interface (right, left, etc.) */
uint16_t ChannelConfig; /**< CHANNEL_* masks indicating what channel layout is supported by this terminal */
uint8_t ChannelStrIndex; /**< Index of a string descriptor describing this channel within the device */
diff --git a/Demos/Device/CDC/CDC.c b/Demos/Device/CDC/CDC.c index d4eecc897..5e153f652 100644 --- a/Demos/Device/CDC/CDC.c +++ b/Demos/Device/CDC/CDC.c @@ -56,7 +56,7 @@ TASK_LIST *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -66,7 +66,7 @@ CDC_Line_Coding_t LineCoding = { BaudRateBPS: 9600, /** String to print through the virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";
-/** String to print through the virtual serial port when the joystick is pressed downwards. */
+/** String to print through the virtual serial port when the joystick is pressed downward. */
char JoystickDownString[] = "Joystick Down\r\n";
/** String to print through the virtual serial port when the joystick is pressed left. */
diff --git a/Demos/Device/CDC/CDC.h b/Demos/Device/CDC/CDC.h index d953303f7..a36fdc921 100644 --- a/Demos/Device/CDC/CDC.h +++ b/Demos/Device/CDC/CDC.h @@ -98,17 +98,17 @@ #define CONTROL_LINE_IN_RING (1 << 3)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a framing error has ocurred on the virtual serial port.
+ * to indicate that a framing error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_FRAMEERROR (1 << 4)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a parity error has ocurred on the virtual serial port.
+ * to indicate that a parity error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_PARITYERROR (1 << 5)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a data overrun error has ocurred on the virtual serial port.
+ * to indicate that a data overrun error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
@@ -138,7 +138,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a
diff --git a/Demos/Device/CDC/Descriptors.c b/Demos/Device/CDC/Descriptors.c index fa0c79da0..869dc5deb 100644 --- a/Demos/Device/CDC/Descriptors.c +++ b/Demos/Device/CDC/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/DualCDC/Descriptors.c b/Demos/Device/DualCDC/Descriptors.c index 4f74b138b..91ae50eea 100644 --- a/Demos/Device/DualCDC/Descriptors.c +++ b/Demos/Device/DualCDC/Descriptors.c @@ -338,7 +338,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/DualCDC/DualCDC.c b/Demos/Device/DualCDC/DualCDC.c index 3c598da42..fecbaff60 100644 --- a/Demos/Device/DualCDC/DualCDC.c +++ b/Demos/Device/DualCDC/DualCDC.c @@ -57,7 +57,7 @@ TASK_LIST *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -70,7 +70,7 @@ CDC_Line_Coding_t LineCoding1 = { BaudRateBPS: 9600, *
* These values are set by the host via a class-specific request, however they are not required to be used accurately.
* It is possible to completely ignore these value or use other settings as the host is completely unaware of the physical
- * serial link characteristics and instead sends and recieves data in endpoint streams.
+ * serial link characteristics and instead sends and receives data in endpoint streams.
*/
CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600,
CharFormat: OneStopBit,
@@ -80,7 +80,7 @@ CDC_Line_Coding_t LineCoding2 = { BaudRateBPS: 9600, /** String to print through the first virtual serial port when the joystick is pressed upwards. */
char JoystickUpString[] = "Joystick Up\r\n";
-/** String to print through the first virtual serial port when the joystick is pressed downwards. */
+/** String to print through the first virtual serial port when the joystick is pressed downward. */
char JoystickDownString[] = "Joystick Down\r\n";
/** String to print through the first virtual serial port when the joystick is pressed left. */
@@ -324,7 +324,7 @@ TASK(CDC1_Task) Endpoint_ClearCurrentBank();
}
-/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echos back
+/** Function to manage CDC data transmission and reception to and from the host for the second CDC interface, which echoes back
* all data sent to it from the host.
*/
TASK(CDC2_Task)
@@ -335,13 +335,13 @@ TASK(CDC2_Task) /* Check to see if any data has been received */
if (Endpoint_ReadWriteAllowed())
{
- /* Create a temp buffer big enough to hold the incomming endpoint packet */
+ /* Create a temp buffer big enough to hold the incoming endpoint packet */
uint8_t Buffer[Endpoint_BytesInEndpoint()];
- /* Remember how large the incomming packet is */
+ /* Remember how large the incoming packet is */
uint16_t DataLength = Endpoint_BytesInEndpoint();
- /* Read in the incomming packet into the buffer */
+ /* Read in the incoming packet into the buffer */
Endpoint_Read_Stream_LE(&Buffer, DataLength);
/* Finalize the stream transfer to send the last packet */
diff --git a/Demos/Device/DualCDC/DualCDC.h b/Demos/Device/DualCDC/DualCDC.h index 4c62abf9d..84be114e9 100644 --- a/Demos/Device/DualCDC/DualCDC.h +++ b/Demos/Device/DualCDC/DualCDC.h @@ -87,7 +87,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/* Enums: */
diff --git a/Demos/Device/GenericHID/Descriptors.c b/Demos/Device/GenericHID/Descriptors.c index c460a6c15..0c3fac7f5 100644 --- a/Demos/Device/GenericHID/Descriptors.c +++ b/Demos/Device/GenericHID/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/GenericHID/GenericHID.c b/Demos/Device/GenericHID/GenericHID.c index cacbdc55c..2d9869982 100644 --- a/Demos/Device/GenericHID/GenericHID.c +++ b/Demos/Device/GenericHID/GenericHID.c @@ -268,7 +268,7 @@ TASK(USB_HID_Report) if (Endpoint_ReadWriteAllowed())
{
- /* Create a tempoary buffer to hold the read in report from the host */
+ /* Create a temporary buffer to hold the read in report from the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Read Generic Report Data */
@@ -285,7 +285,7 @@ TASK(USB_HID_Report) if (Endpoint_ReadWriteAllowed())
{
- /* Create a tempoary buffer to hold the report to send to the host */
+ /* Create a temporary buffer to hold the report to send to the host */
uint8_t GenericData[GENERIC_REPORT_SIZE];
/* Create Generic Report Data */
diff --git a/Demos/Device/Joystick/Descriptors.c b/Demos/Device/Joystick/Descriptors.c index 36e644c26..788596e11 100644 --- a/Demos/Device/Joystick/Descriptors.c +++ b/Demos/Device/Joystick/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Keyboard/Descriptors.c b/Demos/Device/Keyboard/Descriptors.c index 1f383ab08..722b65818 100644 --- a/Demos/Device/Keyboard/Descriptors.c +++ b/Demos/Device/Keyboard/Descriptors.c @@ -212,7 +212,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Keyboard/Keyboard.c b/Demos/Device/Keyboard/Keyboard.c index 265e950e0..d118edea6 100644 --- a/Demos/Device/Keyboard/Keyboard.c +++ b/Demos/Device/Keyboard/Keyboard.c @@ -67,7 +67,7 @@ bool UsingReportProtocol = true; uint8_t IdleCount = 0;
/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
+ * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
* the current idle period via a Get Idle HID class request, thus its value must be preserved.
*/
uint16_t IdleMSRemaining = 0;
@@ -243,7 +243,7 @@ EVENT_HANDLER(USB_UnhandledControlPacket) /* Read in the LED report from the host */
uint8_t LEDStatus = Endpoint_Read_Byte();
- /* Process the incomming LED report */
+ /* Process the incoming LED report */
ProcessLEDReport(LEDStatus);
/* Clear the endpoint data */
diff --git a/Demos/Device/KeyboardMouse/Descriptors.c b/Demos/Device/KeyboardMouse/Descriptors.c index c9d91039b..7f39c6b59 100644 --- a/Demos/Device/KeyboardMouse/Descriptors.c +++ b/Demos/Device/KeyboardMouse/Descriptors.c @@ -282,7 +282,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MIDI/Descriptors.c b/Demos/Device/MIDI/Descriptors.c index 1dbc1d915..81f574829 100644 --- a/Demos/Device/MIDI/Descriptors.c +++ b/Demos/Device/MIDI/Descriptors.c @@ -278,7 +278,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MIDI/Descriptors.h b/Demos/Device/MIDI/Descriptors.h index f80e58b20..8a93b87a6 100644 --- a/Demos/Device/MIDI/Descriptors.h +++ b/Demos/Device/MIDI/Descriptors.h @@ -117,7 +117,7 @@ } USB_AudioStreamEndpoint_Std_t;
/** Type define for an Audio class specific MIDI IN jack. This gives information to the host on a MIDI input, either
- * a physical input jack, or a logical jack (recieving input data internally, or from the host via an endpoint).
+ * a physical input jack, or a logical jack (receiving input data internally, or from the host via an endpoint).
*/
typedef struct
{
diff --git a/Demos/Device/MassStorage/Descriptors.c b/Demos/Device/MassStorage/Descriptors.c index a6173156a..dd98db59a 100644 --- a/Demos/Device/MassStorage/Descriptors.c +++ b/Demos/Device/MassStorage/Descriptors.c @@ -172,7 +172,7 @@ USB_Descriptor_String_t PROGMEM SerialNumberString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/MassStorage/MassStorage.c b/Demos/Device/MassStorage/MassStorage.c index 92e33073c..403264835 100644 --- a/Demos/Device/MassStorage/MassStorage.c +++ b/Demos/Device/MassStorage/MassStorage.c @@ -56,7 +56,7 @@ CommandBlockWrapper_t CommandBlock; /** Structure to hold the latest Command Status Wrapper to return to the host, containing the status of the last issued command. */
CommandStatusWrapper_t CommandStatus = { Signature: CSW_SIGNATURE };
-/** Flag to asyncronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
+/** Flag to asynchronously abort any in-progress data transfers upon the reception of a mass storage reset command. */
volatile bool IsMassStoreReset = false;
/** Main program entry point. This routine configures the hardware required by the application, then
@@ -262,7 +262,7 @@ TASK(USB_MassStorage) /* Return command status block to the host */
ReturnCommandStatus();
- /* Check if a Mass Storage Reset ocurred */
+ /* Check if a Mass Storage Reset occurred */
if (IsMassStoreReset)
{
/* Reset the data endpoint banks */
diff --git a/Demos/Device/MassStorage/SCSI.c b/Demos/Device/MassStorage/SCSI.c index d9c552691..d50f63d91 100644 --- a/Demos/Device/MassStorage/SCSI.c +++ b/Demos/Device/MassStorage/SCSI.c @@ -38,7 +38,7 @@ #define INCLUDE_FROM_SCSI_C
#include "SCSI.h"
-/** Structure to hold the SCSI reponse data to a SCSI INQUIRY command. This gives information about the device's
+/** Structure to hold the SCSI response data to a SCSI INQUIRY command. This gives information about the device's
* features and capabilities.
*/
SCSI_Inquiry_Response_t InquiryData =
@@ -88,7 +88,7 @@ void SCSI_DecodeSCSICommand(void) {
bool CommandSuccess = false;
- /* Run the apropriate SCSI command hander function based on the passed command */
+ /* Run the appropriate SCSI command hander function based on the passed command */
switch (CommandBlock.SCSICommandData[0])
{
case SCSI_CMD_INQUIRY:
@@ -235,7 +235,7 @@ static bool SCSI_Command_Read_Capacity_10(void) return true;
}
-/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command peforms a quick check of the Dataflash ICs on the
+/** Command processing for an issued SCSI SEND DIAGNOSTIC command. This command performs a quick check of the Dataflash ICs on the
* board, and indicates if they are present and functioning correctly. Only the Self-Test portion of the diagnostic command is
* supported.
*
diff --git a/Demos/Device/Mouse/Descriptors.c b/Demos/Device/Mouse/Descriptors.c index dac048b97..9ad39f4d4 100644 --- a/Demos/Device/Mouse/Descriptors.c +++ b/Demos/Device/Mouse/Descriptors.c @@ -195,7 +195,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/Mouse/Mouse.c b/Demos/Device/Mouse/Mouse.c index c066d424a..c429768c9 100644 --- a/Demos/Device/Mouse/Mouse.c +++ b/Demos/Device/Mouse/Mouse.c @@ -66,7 +66,7 @@ bool UsingReportProtocol = true; uint8_t IdleCount = 0;
/** Current Idle period remaining. When the IdleCount value is set, this tracks the remaining number of idle
- * milliseconds. This is seperate to the IdleCount timer and is incremented and compared as the host may request
+ * milliseconds. This is separate to the IdleCount timer and is incremented and compared as the host may request
* the current idle period via a Get Idle HID class request, thus its value must be preserved.
*/
uint16_t IdleMSRemaining = 0;
diff --git a/Demos/Device/RNDISEthernet/ARP.c b/Demos/Device/RNDISEthernet/ARP.c index 3560403f4..0f108c290 100644 --- a/Demos/Device/RNDISEthernet/ARP.c +++ b/Demos/Device/RNDISEthernet/ARP.c @@ -41,7 +41,7 @@ * to the output Ethernet frame if the host is requesting the IP or MAC address of the
* virtual server device on the network.
*
- * \param InDataStart Pointer to the start of the incomming packet's ARP header
+ * \param InDataStart Pointer to the start of the incoming packet's ARP header
* \param OutDataStart Pointer to the start of the outgoing packet's ARP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/RNDISEthernet/DHCP.c b/Demos/Device/RNDISEthernet/DHCP.c index 7f220c423..76711fb4f 100644 --- a/Demos/Device/RNDISEthernet/DHCP.c +++ b/Demos/Device/RNDISEthernet/DHCP.c @@ -40,8 +40,8 @@ /** Processes a DHCP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if the host is requesting or accepting an IP address.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param DHCPHeaderInStart Pointer to the start of the incomming packet's DHCP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param DHCPHeaderInStart Pointer to the start of the incoming packet's DHCP header
* \param DHCPHeaderOutStart Pointer to the start of the outgoing packet's DHCP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
@@ -72,12 +72,12 @@ int16_t DHCP_ProcessDHCPPacket(void* IPHeaderInStart, void* DHCPHeaderInStart, v memcpy(&DHCPHeaderOUT->ClientHardwareAddress, &DHCPHeaderIN->ClientHardwareAddress, sizeof(MAC_Address_t));
DHCPHeaderOUT->Cookie = SwapEndian_32(DHCP_MAGIC_COOKIE);
- /* Alter the incomming IP packet header so that the corrected IP source and destinations are used - this means that
+ /* Alter the incoming IP packet header so that the corrected IP source and destinations are used - this means that
when the response IP header is generated, it will use the corrected addresses and not the null/broatcast addresses */
IPHeaderIN->SourceAddress = ClientIPAddress;
IPHeaderIN->DestinationAddress = ServerIPAddress;
- /* Process the incomming DHCP packet options */
+ /* Process the incoming DHCP packet options */
while (DHCPOptionsINStart[0] != DHCP_OPTION_END)
{
/* Find the Message Type DHCP option, to determine the type of DHCP packet */
diff --git a/Demos/Device/RNDISEthernet/DHCP.h b/Demos/Device/RNDISEthernet/DHCP.h index f1e14e196..f0e68b994 100644 --- a/Demos/Device/RNDISEthernet/DHCP.h +++ b/Demos/Device/RNDISEthernet/DHCP.h @@ -102,7 +102,7 @@ uint8_t HardwareAddressLength; /**< Length in bytes of a hardware (MAC) address on the network */
uint8_t Hops; /**< Number of hops required to reach the server, unused */
- uint32_t TransactionID; /**< Unique ID of the DHCP packet, for postive matching between sent and recieved packets */
+ uint32_t TransactionID; /**< Unique ID of the DHCP packet, for positive matching between sent and received packets */
uint16_t ElapsedSeconds; /**< Elapsed seconds since the request was made */
uint16_t Flags; /**< BOOTP packet flags */
diff --git a/Demos/Device/RNDISEthernet/Descriptors.c b/Demos/Device/RNDISEthernet/Descriptors.c index 1994c601c..0e7b9348e 100644 --- a/Demos/Device/RNDISEthernet/Descriptors.c +++ b/Demos/Device/RNDISEthernet/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/RNDISEthernet/Ethernet.c b/Demos/Device/RNDISEthernet/Ethernet.c index b8d561509..3d34f716a 100644 --- a/Demos/Device/RNDISEthernet/Ethernet.c +++ b/Demos/Device/RNDISEthernet/Ethernet.c @@ -31,14 +31,14 @@ /** \file
*
* Ethernet frame packet handling routines. This protocol handles the processing of raw Ethernet
- * frames sent and receieved, deferring the processing of subpacket protocols to the appropriate
+ * frames sent and received, deferring the processing of subpacket protocols to the appropriate
* protocol handlers, such as DHCP or ARP.
*/
#include "Ethernet.h"
/* Global Variables: */
-/** Ethernet Frame buffer structure, to hold the incomming Ethernet frame from the host. */
+/** Ethernet Frame buffer structure, to hold the incoming Ethernet frame from the host. */
Ethernet_Frame_Info_t FrameIN;
/** Ethernet Frame buffer structure, to hold the outgoing Ethernet frame to the host. */
@@ -60,14 +60,14 @@ const IP_Address_t BroadcastIPAddress = {BROADCAST_IP_ADDRESS}; const IP_Address_t ClientIPAddress = {CLIENT_IP_ADDRESS};
-/** Processes an incomming Ethernet frame, and writes the appropriate response to the output Ethernet
+/** Processes an incoming Ethernet frame, and writes the appropriate response to the output Ethernet
* frame buffer if the sub protocol handlers create a valid response.
*/
void Ethernet_ProcessPacket(void)
{
DecodeEthernetFrameHeader(FrameIN.FrameData);
- /* Cast the incomming Ethernet frame to the Ethernet header type */
+ /* Cast the incoming Ethernet frame to the Ethernet header type */
Ethernet_Frame_Header_t* FrameINHeader = (Ethernet_Frame_Header_t*)&FrameIN.FrameData;
Ethernet_Frame_Header_t* FrameOUTHeader = (Ethernet_Frame_Header_t*)&FrameOUT.FrameData;
@@ -91,7 +91,7 @@ void Ethernet_ProcessPacket(void) break;
}
- /* Protcol processing routine has filled a response, complete the ethernet frame header */
+ /* Protocol processing routine has filled a response, complete the ethernet frame header */
if (RetSize > 0)
{
/* Fill out the response Ethernet frame header */
diff --git a/Demos/Device/RNDISEthernet/Ethernet.h b/Demos/Device/RNDISEthernet/Ethernet.h index 23fc325a5..b360f07ae 100644 --- a/Demos/Device/RNDISEthernet/Ethernet.h +++ b/Demos/Device/RNDISEthernet/Ethernet.h @@ -65,7 +65,7 @@ */
#define MAC_COMPARE(MAC1, MAC2) (memcmp(MAC1, MAC2, sizeof(MAC_Address_t)) == 0)
- /** Maximum size of an incomming or outgoing Ethernet frame in bytes */
+ /** Maximum size of an incoming or outgoing Ethernet frame in bytes */
#define ETHERNET_FRAME_SIZE_MAX 1500
/** Minimum size of an Ethernet packet in bytes, to conform to the Ethernet V2 packet standard */
diff --git a/Demos/Device/RNDISEthernet/ICMP.c b/Demos/Device/RNDISEthernet/ICMP.c index a15564059..da4ffcfa1 100644 --- a/Demos/Device/RNDISEthernet/ICMP.c +++ b/Demos/Device/RNDISEthernet/ICMP.c @@ -40,7 +40,7 @@ /** Processes an ICMP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if the host is issuing a ICMP ECHO request.
*
- * \param InDataStart Pointer to the start of the incomming packet's ICMP header
+ * \param InDataStart Pointer to the start of the incoming packet's ICMP header
* \param OutDataStart Pointer to the start of the outgoing packet's ICMP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/RNDISEthernet/IP.c b/Demos/Device/RNDISEthernet/IP.c index 65875bb0a..8fb0b446d 100644 --- a/Demos/Device/RNDISEthernet/IP.c +++ b/Demos/Device/RNDISEthernet/IP.c @@ -39,7 +39,7 @@ /** Processes an IP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if one is created by a subprotocol handler.
*
- * \param InDataStart Pointer to the start of the incomming packet's IP header
+ * \param InDataStart Pointer to the start of the incoming packet's IP header
* \param OutDataStart Pointer to the start of the outgoing packet's IP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
diff --git a/Demos/Device/RNDISEthernet/IP.h b/Demos/Device/RNDISEthernet/IP.h index be928e68f..fc1a46aef 100644 --- a/Demos/Device/RNDISEthernet/IP.h +++ b/Demos/Device/RNDISEthernet/IP.h @@ -51,7 +51,7 @@ /** Protocol IP address of the virtual server machine */
#define SERVER_IP_ADDRESS { 10, 0, 0, 2}
- /** Protocol IP address of the broadcase address */
+ /** Protocol IP address of the broadcast address */
#define BROADCAST_IP_ADDRESS {0xFF, 0xFF, 0xFF, 0xFF}
/** Default Time To Live (TTL) value for sent packets, indicating the maximum allowable hops until their destination is reached */
@@ -75,7 +75,7 @@ uint8_t TypeOfService; /**< Special service type identifier, indicating delay/throughput/reliability levels */
uint16_t TotalLength; /**< Total length of the IP packet, in bytes */
- uint16_t Identification; /**< Idenfication value for identifying fragmented packets */
+ uint16_t Identification; /**< Identification value for identifying fragmented packets */
unsigned int FragmentOffset : 13; /**< Offset of this IP fragment */
unsigned int Flags : 3; /**< Fragment flags, to indicate if a packet is fragmented */
diff --git a/Demos/Device/RNDISEthernet/ProtocolDecoders.c b/Demos/Device/RNDISEthernet/ProtocolDecoders.c index f0e6ebba8..db5da3c81 100644 --- a/Demos/Device/RNDISEthernet/ProtocolDecoders.c +++ b/Demos/Device/RNDISEthernet/ProtocolDecoders.c @@ -29,7 +29,7 @@ */
/* Protocol decoders for Ethernet, TCP, IP, ICMP and ARP. Each of these routines
- accepts a header to the appropriate protocol and prints out pertient information
+ accepts a header to the appropriate protocol and prints out pertinent information
on the packet through the serial port.
To disable printing of a specific protocol, define the token NO_DECODE_{Protocol}
@@ -39,7 +39,7 @@ /** \file
*
* Protocol decoding routines, for the plain-text decoding of Ethernet frames for debugging purposes.
- * Enabled protocol decoders will print incomming Ethernet frame contents through the USART in a human
+ * Enabled protocol decoders will print incoming Ethernet frame contents through the USART in a human
* readable format.
*
* Note that the USART is a slow transmission medium, and will slow down packet processing considerably.
diff --git a/Demos/Device/RNDISEthernet/RNDIS.h b/Demos/Device/RNDISEthernet/RNDIS.h index 7c75875cf..0d240ac4e 100644 --- a/Demos/Device/RNDISEthernet/RNDIS.h +++ b/Demos/Device/RNDISEthernet/RNDIS.h @@ -45,7 +45,7 @@ #include "Ethernet.h"
/* Macros: */
- /** Physical MAC Address of the USB netowork adapter */
+ /** Physical MAC Address of the USB network adapter */
#define ADAPTER_MAC_ADDRESS {0x02, 0x00, 0x02, 0x00, 0x02, 0x00}
/** Implemented RNDIS Version Major */
diff --git a/Demos/Device/RNDISEthernet/RNDISEthernet.c b/Demos/Device/RNDISEthernet/RNDISEthernet.c index 3f9bb187a..98863a113 100644 --- a/Demos/Device/RNDISEthernet/RNDISEthernet.c +++ b/Demos/Device/RNDISEthernet/RNDISEthernet.c @@ -99,7 +99,7 @@ EVENT_HANDLER(USB_Connect) }
/** Event handler for the USB_Disconnect event. This indicates that the device is no longer connected to a host via
- * the status LEDs and stops all the relevent tasks.
+ * the status LEDs and stops all the relevant tasks.
*/
EVENT_HANDLER(USB_Disconnect)
{
@@ -114,7 +114,7 @@ EVENT_HANDLER(USB_Disconnect) }
/** Event handler for the USB_ConfigurationChanged event. This is fired when the host sets the current configuration
- * of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevent tasks.
+ * of the USB device after enumeration, and configures the RNDIS device endpoints and starts the relevant tasks.
*/
EVENT_HANDLER(USB_ConfigurationChanged)
{
@@ -238,7 +238,7 @@ void UpdateStatus(uint8_t CurrentStatus) }
/** Task to manage the sending and receiving of encapsulated RNDIS data and notifications. This removes the RNDIS
- * wrapper from recieved Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
+ * wrapper from received Ethernet frames and places them in the FrameIN global buffer, or adds the RNDIS wrapper
* to a frame in the FrameOUT global before sending the buffer contents to the host.
*/
TASK(RNDIS_Task)
diff --git a/Demos/Device/RNDISEthernet/TCP.c b/Demos/Device/RNDISEthernet/TCP.c index b4a65344c..f259aad02 100644 --- a/Demos/Device/RNDISEthernet/TCP.c +++ b/Demos/Device/RNDISEthernet/TCP.c @@ -60,7 +60,7 @@ TASK(TCP_Task) {
/* Task to hand off TCP packets to and from the listening applications. */
- /* Run each application in sequence, to process incomming and generate outgoing packets */
+ /* Run each application in sequence, to process incoming and generate outgoing packets */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
/* Find the corresponding port entry in the port table */
@@ -179,7 +179,7 @@ void TCP_Init(void) */
bool TCP_SetPortState(uint16_t Port, uint8_t State, void (*Handler)(TCP_ConnectionState_t*, TCP_ConnectionBuffer_t*))
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
/* Check to see if the port entry is already in the port state table */
for (uint8_t PTableEntry = 0; PTableEntry < MAX_TCP_CONNECTIONS; PTableEntry++)
@@ -226,7 +226,7 @@ bool TCP_SetPortState(uint16_t Port, uint8_t State, void (*Handler)(TCP_Connecti */
uint8_t TCP_GetPortState(uint16_t Port)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t PTableEntry = 0; PTableEntry < MAX_TCP_CONNECTIONS; PTableEntry++)
{
@@ -251,7 +251,7 @@ uint8_t TCP_GetPortState(uint16_t Port) */
bool TCP_SetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort, uint8_t State)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -291,7 +291,7 @@ bool TCP_SetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t */
uint8_t TCP_GetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -318,7 +318,7 @@ uint8_t TCP_GetConnectionState(uint16_t Port, IP_Address_t RemoteAddress, uint16 */
TCP_ConnectionInfo_t* TCP_GetConnectionInfo(uint16_t Port, IP_Address_t RemoteAddress, uint16_t RemotePort)
{
- /* Note, Port number should be specified in BIG endian to simplfy network code */
+ /* Note, Port number should be specified in BIG endian to simplify network code */
for (uint8_t CSTableEntry = 0; CSTableEntry < MAX_TCP_CONNECTIONS; CSTableEntry++)
{
@@ -337,8 +337,8 @@ TCP_ConnectionInfo_t* TCP_GetConnectionInfo(uint16_t Port, IP_Address_t RemoteAd /** Processes a TCP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if one is created by a application handler.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param TCPHeaderInStart Pointer to the start of the incomming packet's TCP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param TCPHeaderInStart Pointer to the start of the incoming packet's TCP header
* \param TCPHeaderOutStart Pointer to the start of the outgoing packet's TCP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE if no
@@ -357,7 +357,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void bool PacketResponse = false;
- /* Check if the destination port is open and allows incomming connections */
+ /* Check if the destination port is open and allows incoming connections */
if (TCP_GetPortState(TCPHeaderIN->DestinationPort) == TCP_Port_Open)
{
/* Detect SYN from host to start a connection */
@@ -375,7 +375,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void }
else
{
- /* Process the incomming TCP packet based on the current connection state for the sender and port */
+ /* Process the incoming TCP packet based on the current connection state for the sender and port */
switch (TCP_GetConnectionState(TCPHeaderIN->DestinationPort, IPHeaderIN->SourceAddress, TCPHeaderIN->SourcePort))
{
case TCP_Connection_Listen:
@@ -470,7 +470,7 @@ int16_t TCP_ProcessTCPPacket(void* IPHeaderInStart, void* TCPHeaderInStart, void }
else
{
- /* Buffer is currently in use by the application, defer processing of the incomming packet */
+ /* Buffer is currently in use by the application, defer processing of the incoming packet */
return NO_PROCESS;
}
}
@@ -591,7 +591,7 @@ static uint16_t TCP_Checksum16(void* TCPHeaderOutStart, IP_Address_t SourceAddre {
uint32_t Checksum = 0;
- /* TCP/IP checksums are the addition of the one's compliment of each word including the IP psudo-header,
+ /* TCP/IP checksums are the addition of the one's compliment of each word including the IP pseudo-header,
complimented */
Checksum += ((uint16_t*)&SourceAddress)[0];
diff --git a/Demos/Device/RNDISEthernet/TCP.h b/Demos/Device/RNDISEthernet/TCP.h index 25fa6575d..d4b72a519 100644 --- a/Demos/Device/RNDISEthernet/TCP.h +++ b/Demos/Device/RNDISEthernet/TCP.h @@ -224,7 +224,7 @@ unsigned char Reserved : 4; /**< Reserved, must be all 0 */
unsigned char DataOffset : 4; /**< Offset of the data from the start of the header, in 4 byte chunks */
uint8_t Flags; /**< TCP packet flags */
- uint16_t WindowSize; /**< Current data window size (bytes remaning in reception buffer) */
+ uint16_t WindowSize; /**< Current data window size (bytes remaining in reception buffer) */
uint16_t Checksum; /**< TCP checksum */
uint16_t UrgentPointer; /**< Urgent data pointer */
diff --git a/Demos/Device/RNDISEthernet/UDP.c b/Demos/Device/RNDISEthernet/UDP.c index 3e1f9395b..1f571c3e9 100644 --- a/Demos/Device/RNDISEthernet/UDP.c +++ b/Demos/Device/RNDISEthernet/UDP.c @@ -40,8 +40,8 @@ /** Processes a UDP packet inside an Ethernet frame, and writes the appropriate response
* to the output Ethernet frame if a subprotocol handler has created a response packet.
*
- * \param IPHeaderInStart Pointer to the start of the incomming packet's IP header
- * \param UDPHeaderInStart Pointer to the start of the incomming packet's UDP header
+ * \param IPHeaderInStart Pointer to the start of the incoming packet's IP header
+ * \param UDPHeaderInStart Pointer to the start of the incoming packet's UDP header
* \param UDPHeaderOutStart Pointer to the start of the outgoing packet's UDP header
*
* \return The number of bytes written to the out Ethernet frame if any, NO_RESPONSE otherwise
diff --git a/Demos/Device/USBtoSerial/Descriptors.c b/Demos/Device/USBtoSerial/Descriptors.c index 03d4ed9e4..67fb4e910 100644 --- a/Demos/Device/USBtoSerial/Descriptors.c +++ b/Demos/Device/USBtoSerial/Descriptors.c @@ -216,7 +216,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/Device/USBtoSerial/RingBuff.h b/Demos/Device/USBtoSerial/RingBuff.h index 4b6bfde66..23288d87a 100644 --- a/Demos/Device/USBtoSerial/RingBuff.h +++ b/Demos/Device/USBtoSerial/RingBuff.h @@ -29,8 +29,8 @@ */
/* Buffer Configuration: */
- /* Buffer length - select static size of created ringbuffers: */
- #define BUFF_STATICSIZE 128 // Set to the static ringbuffer size for all ringbuffers (place size after define)
+ /* Buffer length - select static size of created ring buffers: */
+ #define BUFF_STATICSIZE 128 // Set to the static ring buffer size for all ring buffers (place size after define)
/* Volatile mode - uncomment to make buffers volatile, for use in ISRs, etc: */
#define BUFF_VOLATILE // Uncomment to cause all ring buffers to become volatile (and atomic if multi-byte) in access
@@ -40,9 +40,9 @@ // #define BUFF_DROPNEW // Uncomment to cause full ring buffers to drop the new character when full
// #define BUFF_NODROPCHECK // Uncomment to ignore full ring buffer checks - checking left to user!
- /* Underflow behaviour - select behaviour when Buffer_GetElement is called with an empty ringbuffer: */
- //#define BUFF_EMPTYRETURNSZERO // Uncomment to return 0 when an empty ringbuffer is read
- #define BUFF_NOEMPTYCHECK // Uncomment to disable checking of empty ringbuffers - checking left to user!
+ /* Underflow behaviour - select behaviour when Buffer_GetElement is called with an empty ring buffer: */
+ //#define BUFF_EMPTYRETURNSZERO // Uncomment to return 0 when an empty ring buffer is read
+ #define BUFF_NOEMPTYCHECK // Uncomment to disable checking of empty ring buffers - checking left to user!
/* Buffer storage type - set the datatype for the stored data */
#define BUFF_DATATYPE uint8_t // Change to the data type that is going to be stored into the buffer
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.c b/Demos/Device/USBtoSerial/USBtoSerial.c index c7c9e4b04..a9f0434cb 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.c +++ b/Demos/Device/USBtoSerial/USBtoSerial.c @@ -79,7 +79,7 @@ int main(void) LEDs_Init();
ReconfigureUSART();
- /* Ringbuffer Initialization */
+ /* Ring buffer Initialization */
Buffer_Initialize(&Rx_Buffer);
Buffer_Initialize(&Tx_Buffer);
diff --git a/Demos/Device/USBtoSerial/USBtoSerial.h b/Demos/Device/USBtoSerial/USBtoSerial.h index 3fb6d7d9f..092660069 100644 --- a/Demos/Device/USBtoSerial/USBtoSerial.h +++ b/Demos/Device/USBtoSerial/USBtoSerial.h @@ -39,7 +39,7 @@ /* Includes: */
#include <avr/io.h>
#include <avr/wdt.h>
- #include <avr/interrupt.h> + #include <avr/interrupt.h>
#include <avr/power.h>
#include "Descriptors.h"
@@ -99,17 +99,17 @@ #define CONTROL_LINE_IN_RING (1 << 3)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a framing error has ocurred on the virtual serial port.
+ * to indicate that a framing error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_FRAMEERROR (1 << 4)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a parity error has ocurred on the virtual serial port.
+ * to indicate that a parity error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_PARITYERROR (1 << 5)
/** Mask for use with the a NOTIF_SerialState class specific notification from the device to the host,
- * to indicate that a data overrun error has ocurred on the virtual serial port.
+ * to indicate that a data overrun error has occurred on the virtual serial port.
*/
#define CONTROL_LINE_IN_OVERRUNERROR (1 << 6)
@@ -139,7 +139,7 @@ uint8_t ParityType; /**< Parity setting of the virtual serial port, a value from the
* CDCDevice_LineCodingParity_t enum
*/
- uint8_t DataBits; /**< Bits of data per charater of the virtual serial port */
+ uint8_t DataBits; /**< Bits of data per character of the virtual serial port */
} CDC_Line_Coding_t;
/** Type define for a CDC notification, sent to the host via the CDC notification endpoint to indicate a
diff --git a/Demos/Host/CDCHost/CDCHost.c b/Demos/Host/CDCHost/CDCHost.c index 1f05ecb1f..a51f597a2 100644 --- a/Demos/Host/CDCHost/CDCHost.c +++ b/Demos/Host/CDCHost/CDCHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"CDC Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -196,7 +196,7 @@ TASK(USB_CDC_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -248,7 +248,7 @@ TASK(USB_CDC_Host) uint16_t BufferLength = Pipe_BytesInPipe();
uint8_t Buffer[BufferLength];
- /* Read in the pipe data to the tempoary buffer */
+ /* Read in the pipe data to the temporary buffer */
Pipe_Read_Stream_LE(Buffer, BufferLength);
/* Clear the pipe after it is read, ready for the next packet */
diff --git a/Demos/Host/CDCHost/ConfigDescriptor.h b/Demos/Host/CDCHost/ConfigDescriptor.h index 04d71aade..0ba614824 100644 --- a/Demos/Host/CDCHost/ConfigDescriptor.h +++ b/Demos/Host/CDCHost/ConfigDescriptor.h @@ -73,7 +73,7 @@ DescriptorTooLarge = 2, /**< The device's Configuration Descriptor is too large to process */
InvalidConfigDataReturned = 3, /**< The device returned an invalid Configuration Descriptor */
NoCDCInterfaceFound = 4, /**< A compatible CDC interface was not found in the device's Configuration Descriptor */
- NoEndpointFound = 5, /**< Cmpatible CDC endpoints were not found in the device's CDC interface */
+ NoEndpointFound = 5, /**< Compatible CDC endpoints were not found in the device's CDC interface */
};
/* Configuration Descriptor Comparison Functions: */
diff --git a/Demos/Host/GenericHIDHost/GenericHIDHost.c b/Demos/Host/GenericHIDHost/GenericHIDHost.c index c703039f3..778b8f6f8 100644 --- a/Demos/Host/GenericHIDHost/GenericHIDHost.c +++ b/Demos/Host/GenericHIDHost/GenericHIDHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Generic HID Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -288,7 +288,7 @@ TASK(USB_HID_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
diff --git a/Demos/Host/KeyboardHost/KeyboardHost.c b/Demos/Host/KeyboardHost/KeyboardHost.c index 13aed7ec3..f73e56893 100644 --- a/Demos/Host/KeyboardHost/KeyboardHost.c +++ b/Demos/Host/KeyboardHost/KeyboardHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -263,7 +263,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -310,7 +310,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
diff --git a/Demos/Host/KeyboardHostWithParser/HIDReport.h b/Demos/Host/KeyboardHostWithParser/HIDReport.h index 5e18313f6..7c59138c2 100644 --- a/Demos/Host/KeyboardHostWithParser/HIDReport.h +++ b/Demos/Host/KeyboardHostWithParser/HIDReport.h @@ -51,7 +51,7 @@ {
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
- ParseControlError = 2, /**< Control error occured while trying to read the device HID descriptor */
+ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
diff --git a/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c b/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c index f7a0087e7..eefd2fa56 100644 --- a/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c +++ b/Demos/Host/KeyboardHostWithParser/KeyboardHostWithParser.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Keyboard Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -199,7 +199,7 @@ TASK(USB_Keyboard_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -255,7 +255,7 @@ TASK(USB_Keyboard_Host) break;
}
- /* All LEDs off - ready to indicate keypresses */
+ /* All LEDs off - ready to indicate key presses */
UpdateStatus(Status_USBReady);
puts_P(PSTR("Keyboard Enumerated.\r\n"));
@@ -282,7 +282,7 @@ TASK(USB_Keyboard_Host) /* Check each HID report item in turn, looking for keyboard scan code reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
- /* Create a tempoary item pointer to the next report item */
+ /* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
/* Check if the current report item is a keyboard scancode */
diff --git a/Demos/Host/MassStorageHost/MassStorageHost.c b/Demos/Host/MassStorageHost/MassStorageHost.c index d042b78bb..a7b550ca7 100644 --- a/Demos/Host/MassStorageHost/MassStorageHost.c +++ b/Demos/Host/MassStorageHost/MassStorageHost.c @@ -74,7 +74,7 @@ int main(void) /* Indicate USB not ready */
UpdateStatus(Status_USBNotReady);
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"MassStore Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -137,7 +137,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -170,7 +170,7 @@ TASK(USB_MassStore_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -222,7 +222,7 @@ TASK(USB_MassStore_Host) break;
}
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = MassStore_GetMaxLUN(&MassStore_MaxLUNIndex)) != HOST_SENDCONTROL_Successful)
{
ShowDiskReadError(PSTR("Get Max LUN"), ErrorCode);
@@ -240,7 +240,7 @@ TASK(USB_MassStore_Host) }
/* Get sense data from the device - many devices will not accept any other commands until the sense data
- * is read - both on startup and after a failed command */
+ * is read - both on start-up and after a failed command */
SCSI_Request_Sense_Response_t SenseData;
if ((ErrorCode = MassStore_RequestSense(0, &SenseData)) != 0)
{
@@ -397,7 +397,7 @@ void UpdateStatus(uint8_t CurrentStatus) LEDs_SetAllLEDs(LEDMask);
}
-/** Indicates that a communication error has ocurred with the attached Mass Storage Device,
+/** Indicates that a communication error has occurred with the attached Mass Storage Device,
* printing error codes to the serial port and waiting until the device is removed before
* continuing.
*
diff --git a/Demos/Host/MassStorageHost/MassStorageHost.h b/Demos/Host/MassStorageHost/MassStorageHost.h index b130cfed3..33e2d2538 100644 --- a/Demos/Host/MassStorageHost/MassStorageHost.h +++ b/Demos/Host/MassStorageHost/MassStorageHost.h @@ -66,7 +66,7 @@ Status_EnumerationError = 3, /**< Software error while enumerating the attached USB device */
Status_HardwareError = 4, /**< Hardware error while enumerating the attached USB device */
Status_Busy = 5, /**< Busy reading or writing to the attached Mass Storage device */
- Status_SCSICommandError = 6, /**< Error sending or recieving a command to or from the attached SCSI device */
+ Status_SCSICommandError = 6, /**< Error sending or receiving a command to or from the attached SCSI device */
};
/* Task Definitions: */
diff --git a/Demos/Host/MassStorageHost/MassStoreCommands.c b/Demos/Host/MassStorageHost/MassStoreCommands.c index f4143adcf..700d969db 100644 --- a/Demos/Host/MassStorageHost/MassStoreCommands.c +++ b/Demos/Host/MassStorageHost/MassStoreCommands.c @@ -37,8 +37,8 @@ * to a FAT library to give file-level access to an attached device's contents.
*
* \note Many Mass Storage devices on the market are non-compliant to the
- * specifications and thus can proove difficult to interface with. It
- * may be neccesary to retry the functions in the module several times
+ * specifications and thus can prove difficult to interface with. It
+ * may be necessary to retry the functions in the module several times
* after they have returned and error to successfully send the command
* to the device. Some devices may also need to have the stream function
* timeout period extended beyond 100ms (some badly designed devices exceeding
@@ -52,17 +52,17 @@ /* Globals: */
/** Current CBW to send to the device. This is automatically filled by the routines
- * in this file and is not externally accessable.
+ * in this file and is not externally accessible.
*/
static CommandBlockWrapper_t SCSICommandBlock;
/** Current CSW received from the device. This is automatically filled by the routines
- * in this file and is externally accessable so that the return codes may be checked.
+ * in this file and is externally accessible so that the return codes may be checked.
*/
CommandStatusWrapper_t SCSICommandStatus;
/** Current Tag value used in issued CBWs to the device. This is automatically incremented
- * by the routines in this file, and is not externally accessable.
+ * by the routines in this file, and is not externally accessible.
*/
static uint32_t MassStore_Tag = 1;
@@ -122,7 +122,7 @@ static uint8_t MassStore_WaitForDataReceived(void) /* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
- /* Clear the flag and decrement the timout period counter */
+ /* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
diff --git a/Demos/Host/MassStorageHost/MassStoreCommands.h b/Demos/Host/MassStorageHost/MassStoreCommands.h index adab4fb0a..97bbe29b2 100644 --- a/Demos/Host/MassStorageHost/MassStoreCommands.h +++ b/Demos/Host/MassStorageHost/MassStoreCommands.h @@ -54,7 +54,7 @@ /** Command Block Wrapper signature byte, for verification of valid CBW blocks */
#define CBW_SIGNATURE 0x43425355UL
- /** Command Statuc Wrapper signature byte, for verification of valid CSW blocks */
+ /** Command Static Wrapper signature byte, for verification of valid CSW blocks */
#define CSW_SIGNATURE 0x53425355UL
/** Data direction mask for the Flags field of a CBW, indicating Host-to-Device transfer direction */
@@ -98,13 +98,13 @@ {
uint32_t Signature; /**< Command status signature, always equal to CSW_SIGNATURE */
uint32_t Tag; /**< Current CBW tag, to positively associate a CBW with a CSW */
- uint32_t DataTransferResidue; /**< Length of data not transfered */
+ uint32_t DataTransferResidue; /**< Length of data not transferred */
uint8_t Status; /**< Command status, a value from the MassStorageHost_CommandStatusCodes_t enum */
} CommandStatusWrapper_t;
/** Type define for a SCSI Sense structure. Structures of this type are filled out by the
* device via the MassStore_RequestSense() function, indicating the current sense data of the
- * device (giving explitic error codes for the last issued command). For details of the
+ * device (giving explicit error codes for the last issued command). For details of the
* structure contents, refer to the SCSI specifications.
*/
typedef struct
diff --git a/Demos/Host/MouseHost/MouseHost.c b/Demos/Host/MouseHost/MouseHost.c index dd7ff73f0..29cbd8741 100644 --- a/Demos/Host/MouseHost/MouseHost.c +++ b/Demos/Host/MouseHost/MouseHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -259,7 +259,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -306,7 +306,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Protocol).\r\n"));
diff --git a/Demos/Host/MouseHostWithParser/HIDReport.h b/Demos/Host/MouseHostWithParser/HIDReport.h index 8ebb97da1..aa259a114 100644 --- a/Demos/Host/MouseHostWithParser/HIDReport.h +++ b/Demos/Host/MouseHostWithParser/HIDReport.h @@ -60,7 +60,7 @@ {
ParseSuccessful = 0, /**< HID report descriptor parsed successfully */
ParseError = 1, /**< Failed to fully process the HID report descriptor */
- ParseControlError = 2, /**< Control error occured while trying to read the device HID descriptor */
+ ParseControlError = 2, /**< Control error occurred while trying to read the device HID descriptor */
};
/* Type Defines: */
diff --git a/Demos/Host/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/MouseHostWithParser/MouseHostWithParser.c index 5ccda4912..79cecdf5b 100644 --- a/Demos/Host/MouseHostWithParser/MouseHostWithParser.c +++ b/Demos/Host/MouseHostWithParser/MouseHostWithParser.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Mouse Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -200,7 +200,7 @@ TASK(USB_Mouse_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if ((ErrorCode = USB_Host_SendControlRequest(NULL)) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control Error (Set Configuration).\r\n"));
@@ -256,7 +256,7 @@ TASK(USB_Mouse_Host) break;
}
- /* All LEDs off - ready to indicate keypresses */
+ /* All LEDs off - ready to indicate key presses */
UpdateStatus(Status_USBReady);
puts_P(PSTR("Mouse Enumerated.\r\n"));
@@ -285,7 +285,7 @@ TASK(USB_Mouse_Host) /* Check each HID report item in turn, looking for mouse X/Y/button reports */
for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
{
- /* Create a tempoary item pointer to the next report item */
+ /* Create a temporary item pointer to the next report item */
HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
bool FoundData;
diff --git a/Demos/Host/StillImageHost/StillImageCommands.c b/Demos/Host/StillImageHost/StillImageCommands.c index 4d4c0b170..be6f7482d 100644 --- a/Demos/Host/StillImageHost/StillImageCommands.c +++ b/Demos/Host/StillImageHost/StillImageCommands.c @@ -111,7 +111,7 @@ uint8_t SImage_RecieveBlockHeader(void) /* Check to see if a new frame has been issued (1ms elapsed) */
if (USB_INT_HasOccurred(USB_INT_HSOFI))
{
- /* Clear the flag and decrement the timout period counter */
+ /* Clear the flag and decrement the timeout period counter */
USB_INT_Clear(USB_INT_HSOFI);
TimeoutMSRem--;
diff --git a/Demos/Host/StillImageHost/StillImageCommands.h b/Demos/Host/StillImageHost/StillImageCommands.h index 5679deae2..2ac6afd8b 100644 --- a/Demos/Host/StillImageHost/StillImageCommands.h +++ b/Demos/Host/StillImageHost/StillImageCommands.h @@ -62,7 +62,7 @@ (params * sizeof(PIMA_SendBlock.Params[0])))
/* Type Defines: */
- /** Type define for a PIMA container, use to send commands and receieve responses to and from an
+ /** Type define for a PIMA container, use to send commands and receive responses to and from an
* attached Still Image device.
*/
typedef struct
diff --git a/Demos/Host/StillImageHost/StillImageHost.c b/Demos/Host/StillImageHost/StillImageHost.c index 50b2054df..787629c3b 100644 --- a/Demos/Host/StillImageHost/StillImageHost.c +++ b/Demos/Host/StillImageHost/StillImageHost.c @@ -75,7 +75,7 @@ int main(void) /* Initialize USB Subsystem */
USB_Init();
- /* Startup message */
+ /* Start-up message */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"Still Image Host Demo running.\r\n" ESC_INVERSE_OFF));
@@ -132,7 +132,7 @@ EVENT_HANDLER(USB_HostError) for(;;);
}
-/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occured while
+/** Event handler for the USB_DeviceEnumerationFailed event. This indicates that a problem occurred while
* enumerating an attached USB device.
*/
EVENT_HANDLER(USB_DeviceEnumerationFailed)
@@ -165,7 +165,7 @@ TASK(USB_SImage_Host) wLength: 0,
};
- /* Send the request, display error and wait for device detatch if request fails */
+ /* Send the request, display error and wait for device detach if request fails */
if (USB_Host_SendControlRequest(NULL) != HOST_SENDCONTROL_Successful)
{
puts_P(PSTR("Control error.\r\n"));
@@ -223,7 +223,7 @@ TASK(USB_SImage_Host) /* Send the GETDEVICEINFO block */
SImage_SendBlockHeader();
- /* Recieve the response data block */
+ /* Receive the response data block */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -274,7 +274,7 @@ TASK(USB_SImage_Host) UnicodeToASCII(DeviceInfoPos, DeviceVersion);
printf_P(PSTR(" Device Version: %s\r\n"), DeviceVersion);
- /* Recieve the final response block from the device */
+ /* Receive the final response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -302,7 +302,7 @@ TASK(USB_SImage_Host) /* Send the OPENSESSION block, open a session with an ID of 0x0001 */
SImage_SendBlockHeader();
- /* Recieve the response block from the device */
+ /* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
@@ -330,7 +330,7 @@ TASK(USB_SImage_Host) /* Send the CLOSESESSION block, close the session with an ID of 0x0001 */
SImage_SendBlockHeader();
- /* Recieve the response block from the device */
+ /* Receive the response block from the device */
if ((ErrorCode = SImage_RecieveBlockHeader()) != PIPE_RWSTREAM_ERROR_NoError)
{
ShowCommandError(ErrorCode, false);
diff --git a/Demos/OTG/TestApp/Descriptors.c b/Demos/OTG/TestApp/Descriptors.c index fc56660be..d5155678b 100644 --- a/Demos/OTG/TestApp/Descriptors.c +++ b/Demos/OTG/TestApp/Descriptors.c @@ -140,7 +140,7 @@ USB_Descriptor_String_t PROGMEM ProductString = /** This function is called by the library when in device mode, and must be overridden (see StdDescriptors.h
* documentation) by the application code so that the address and size of a requested descriptor can be given
- * to the USB library. When the device recieves a Get Descriptor request on the control endpoint, this function
+ * to the USB library. When the device receives a Get Descriptor request on the control endpoint, this function
* is called so that the descriptor details can be passed back and the appropriate descriptor sent back to the
* USB host.
*/
diff --git a/Demos/OTG/TestApp/TestApp.c b/Demos/OTG/TestApp/TestApp.c index a66a728c9..49fdf6782 100644 --- a/Demos/OTG/TestApp/TestApp.c +++ b/Demos/OTG/TestApp/TestApp.c @@ -80,7 +80,7 @@ int main(void) /* Turn on interrupts */
sei();
- /* Startup message via USART */
+ /* Start-up message via USART */
puts_P(PSTR(ESC_RESET ESC_BG_WHITE ESC_INVERSE_ON ESC_ERASE_DISPLAY
"LUFA Demo running.\r\n" ESC_INVERSE_OFF));
@@ -130,7 +130,7 @@ TASK(TestApp_CheckJoystick) */
TASK(TestApp_CheckTemp)
{
- static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on startup
+ static SchedulerDelayCounter_t DelayCounter = 10000; // Force immediate run on start-up
/* Task runs every 10000 ticks, 10 seconds for this demo */
if (Scheduler_HasDelayElapsed(10000, &DelayCounter))
@@ -161,7 +161,7 @@ TASK(TestApp_CheckHWB) /* Set flag, indicating that current pressed state has been handled */
IsPressed = true;
- /* First start of the USB interface permenantly blocks the joystick task */
+ /* First start of the USB interface permanently blocks the joystick task */
if (BlockingJoystickTask == false)
{
Scheduler_SetTaskMode(TestApp_CheckJoystick, TASK_STOP);
|