diff options
Diffstat (limited to 'Demos')
62 files changed, 13392 insertions, 5208 deletions
diff --git a/Demos/Device/ClassDriver/AudioInput/doxyfile b/Demos/Device/ClassDriver/AudioInput/doxyfile index d52d22cdc..1d9a51775 100644 --- a/Demos/Device/ClassDriver/AudioInput/doxyfile +++ b/Demos/Device/ClassDriver/AudioInput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/AudioOutput/doxyfile b/Demos/Device/ClassDriver/AudioOutput/doxyfile index 937ef3907..61d83e867 100644 --- a/Demos/Device/ClassDriver/AudioOutput/doxyfile +++ b/Demos/Device/ClassDriver/AudioOutput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = YES +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/CCID/doxyfile b/Demos/Device/ClassDriver/CCID/doxyfile index 43e4e56c0..1d8f56522 100644 --- a/Demos/Device/ClassDriver/CCID/doxyfile +++ b/Demos/Device/ClassDriver/CCID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/DualMIDI/doxyfile b/Demos/Device/ClassDriver/DualMIDI/doxyfile index 879aae3e8..445960d52 100644 --- a/Demos/Device/ClassDriver/DualMIDI/doxyfile +++ b/Demos/Device/ClassDriver/DualMIDI/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile b/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile index 40dcfe915..d5f6f1a0e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile +++ b/Demos/Device/ClassDriver/DualVirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/GenericHID/doxyfile b/Demos/Device/ClassDriver/GenericHID/doxyfile index ffc0d0590..6a8127fe7 100644 --- a/Demos/Device/ClassDriver/GenericHID/doxyfile +++ b/Demos/Device/ClassDriver/GenericHID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -876,6 +942,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -885,6 +955,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -937,7 +1011,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -969,12 +1043,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1002,7 +1076,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1015,6 +1089,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1133,7 +1217,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1162,12 +1246,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1191,13 +1287,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1236,7 +1332,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1312,7 +1408,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1320,7 +1416,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1329,7 +1425,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1337,7 +1433,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1345,7 +1441,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1438,7 +1534,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1450,7 +1546,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1477,8 +1573,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1539,7 +1635,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1552,7 +1648,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1604,21 +1700,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1637,9 +1747,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1736,12 +1849,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1781,9 +1910,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1792,8 +1921,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1879,6 +2008,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1911,9 +2047,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/Joystick/doxyfile b/Demos/Device/ClassDriver/Joystick/doxyfile index 45ebd1341..4c25402e1 100644 --- a/Demos/Device/ClassDriver/Joystick/doxyfile +++ b/Demos/Device/ClassDriver/Joystick/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/Keyboard/doxyfile b/Demos/Device/ClassDriver/Keyboard/doxyfile index e39731937..04e0a51cb 100644 --- a/Demos/Device/ClassDriver/Keyboard/doxyfile +++ b/Demos/Device/ClassDriver/Keyboard/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/KeyboardMouse/doxyfile b/Demos/Device/ClassDriver/KeyboardMouse/doxyfile index 6648a78d1..347fbd7af 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/doxyfile +++ b/Demos/Device/ClassDriver/KeyboardMouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile index 6ea750cfc..695586847 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/MIDI/doxyfile b/Demos/Device/ClassDriver/MIDI/doxyfile index e7bfea0c0..4684c71f7 100644 --- a/Demos/Device/ClassDriver/MIDI/doxyfile +++ b/Demos/Device/ClassDriver/MIDI/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/MassStorage/doxyfile b/Demos/Device/ClassDriver/MassStorage/doxyfile index 84c2d3d0b..5f274bff9 100644 --- a/Demos/Device/ClassDriver/MassStorage/doxyfile +++ b/Demos/Device/ClassDriver/MassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile b/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile index 7f0c541ba..5bbdbda79 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/Mouse/doxyfile b/Demos/Device/ClassDriver/Mouse/doxyfile index 37bc83018..43f88ca1a 100644 --- a/Demos/Device/ClassDriver/Mouse/doxyfile +++ b/Demos/Device/ClassDriver/Mouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/RNDISEthernet/doxyfile b/Demos/Device/ClassDriver/RNDISEthernet/doxyfile index 29d07c317..c42b6ac30 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/doxyfile +++ b/Demos/Device/ClassDriver/RNDISEthernet/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/VirtualSerial/doxyfile b/Demos/Device/ClassDriver/VirtualSerial/doxyfile index aa21df582..03be65dd1 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile b/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile index ff418b91d..651b227fd 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile b/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile index 36c6a6ecc..ec3b85842 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/AudioInput/doxyfile b/Demos/Device/LowLevel/AudioInput/doxyfile index d52d22cdc..1d9a51775 100644 --- a/Demos/Device/LowLevel/AudioInput/doxyfile +++ b/Demos/Device/LowLevel/AudioInput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/AudioOutput/doxyfile b/Demos/Device/LowLevel/AudioOutput/doxyfile index 937ef3907..61d83e867 100644 --- a/Demos/Device/LowLevel/AudioOutput/doxyfile +++ b/Demos/Device/LowLevel/AudioOutput/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = YES +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/BulkVendor/doxyfile b/Demos/Device/LowLevel/BulkVendor/doxyfile index 7c307b094..0fe41f777 100644 --- a/Demos/Device/LowLevel/BulkVendor/doxyfile +++ b/Demos/Device/LowLevel/BulkVendor/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -877,6 +943,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -886,6 +956,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -938,7 +1012,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -970,12 +1044,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1003,7 +1077,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1016,6 +1090,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1134,7 +1218,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1163,12 +1247,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1192,13 +1288,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1237,7 +1333,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1313,7 +1409,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1321,7 +1417,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1330,7 +1426,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1338,7 +1434,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1346,7 +1442,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1439,7 +1535,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1451,7 +1547,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1478,8 +1574,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1540,7 +1636,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1553,7 +1649,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1605,21 +1701,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1638,9 +1748,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1737,12 +1850,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1782,9 +1911,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1793,8 +1922,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1880,6 +2009,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1912,9 +2048,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2082,12 +2218,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2101,15 +2231,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2242,7 +2363,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2253,7 +2375,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2276,11 +2399,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2331,6 +2458,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/CCID/doxyfile b/Demos/Device/LowLevel/CCID/doxyfile index 43e4e56c0..1d8f56522 100644 --- a/Demos/Device/LowLevel/CCID/doxyfile +++ b/Demos/Device/LowLevel/CCID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/DualVirtualSerial/doxyfile b/Demos/Device/LowLevel/DualVirtualSerial/doxyfile index 40dcfe915..d5f6f1a0e 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/doxyfile +++ b/Demos/Device/LowLevel/DualVirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/GenericHID/doxyfile b/Demos/Device/LowLevel/GenericHID/doxyfile index ffc0d0590..6a8127fe7 100644 --- a/Demos/Device/LowLevel/GenericHID/doxyfile +++ b/Demos/Device/LowLevel/GenericHID/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -876,6 +942,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -885,6 +955,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -937,7 +1011,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -969,12 +1043,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1002,7 +1076,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1015,6 +1089,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1133,7 +1217,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1162,12 +1246,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1191,13 +1287,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1236,7 +1332,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1312,7 +1408,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1320,7 +1416,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1329,7 +1425,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1337,7 +1433,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1345,7 +1441,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1438,7 +1534,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1450,7 +1546,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1477,8 +1573,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1539,7 +1635,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1552,7 +1648,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1604,21 +1700,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1637,9 +1747,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1736,12 +1849,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1781,9 +1910,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1792,8 +1921,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1879,6 +2008,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1911,9 +2047,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2081,12 +2217,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2100,15 +2230,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2241,7 +2362,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2252,7 +2374,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2275,11 +2398,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2330,6 +2457,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/Joystick/doxyfile b/Demos/Device/LowLevel/Joystick/doxyfile index 45ebd1341..4c25402e1 100644 --- a/Demos/Device/LowLevel/Joystick/doxyfile +++ b/Demos/Device/LowLevel/Joystick/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/Keyboard/doxyfile b/Demos/Device/LowLevel/Keyboard/doxyfile index e39731937..04e0a51cb 100644 --- a/Demos/Device/LowLevel/Keyboard/doxyfile +++ b/Demos/Device/LowLevel/Keyboard/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/KeyboardMouse/doxyfile b/Demos/Device/LowLevel/KeyboardMouse/doxyfile index 6648a78d1..347fbd7af 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/doxyfile +++ b/Demos/Device/LowLevel/KeyboardMouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/MIDI/doxyfile b/Demos/Device/LowLevel/MIDI/doxyfile index e7bfea0c0..4684c71f7 100644 --- a/Demos/Device/LowLevel/MIDI/doxyfile +++ b/Demos/Device/LowLevel/MIDI/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/MassStorage/doxyfile b/Demos/Device/LowLevel/MassStorage/doxyfile index 84c2d3d0b..5f274bff9 100644 --- a/Demos/Device/LowLevel/MassStorage/doxyfile +++ b/Demos/Device/LowLevel/MassStorage/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/Mouse/doxyfile b/Demos/Device/LowLevel/Mouse/doxyfile index 37bc83018..43f88ca1a 100644 --- a/Demos/Device/LowLevel/Mouse/doxyfile +++ b/Demos/Device/LowLevel/Mouse/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/RNDISEthernet/doxyfile b/Demos/Device/LowLevel/RNDISEthernet/doxyfile index 29d07c317..c42b6ac30 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/doxyfile +++ b/Demos/Device/LowLevel/RNDISEthernet/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Device/LowLevel/VirtualSerial/doxyfile b/Demos/Device/LowLevel/VirtualSerial/doxyfile index aa21df582..03be65dd1 100644 --- a/Demos/Device/LowLevel/VirtualSerial/doxyfile +++ b/Demos/Device/LowLevel/VirtualSerial/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile b/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile index 0bfe97d54..015eb4a74 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile b/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile index 6fd6211d3..5830257c6 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/AudioInputHost/doxyfile b/Demos/Host/ClassDriver/AudioInputHost/doxyfile index dda008658..9b6c8c0db 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/doxyfile +++ b/Demos/Host/ClassDriver/AudioInputHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/AudioOutputHost/doxyfile b/Demos/Host/ClassDriver/AudioOutputHost/doxyfile index c27221c69..0bcfcb84a 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/doxyfile +++ b/Demos/Host/ClassDriver/AudioOutputHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile b/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile index e8f82b8fe..4a4f2b556 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/KeyboardHost/doxyfile b/Demos/Host/ClassDriver/KeyboardHost/doxyfile index 968ab03f1..73b81ab26 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/doxyfile +++ b/Demos/Host/ClassDriver/KeyboardHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile b/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile index 084a65242..c47c9daea 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/MIDIHost/doxyfile b/Demos/Host/ClassDriver/MIDIHost/doxyfile index 7a6906a27..75327a0c3 100644 --- a/Demos/Host/ClassDriver/MIDIHost/doxyfile +++ b/Demos/Host/ClassDriver/MIDIHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/MassStorageHost/doxyfile b/Demos/Host/ClassDriver/MassStorageHost/doxyfile index 58657165c..e580adbcf 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/doxyfile +++ b/Demos/Host/ClassDriver/MassStorageHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/MouseHost/doxyfile b/Demos/Host/ClassDriver/MouseHost/doxyfile index a025dd58d..064e055f4 100644 --- a/Demos/Host/ClassDriver/MouseHost/doxyfile +++ b/Demos/Host/ClassDriver/MouseHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile b/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile index f12fda279..6e99c1a7f 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile +++ b/Demos/Host/ClassDriver/MouseHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/PrinterHost/doxyfile b/Demos/Host/ClassDriver/PrinterHost/doxyfile index 3fcf03b2b..b0f3921b0 100644 --- a/Demos/Host/ClassDriver/PrinterHost/doxyfile +++ b/Demos/Host/ClassDriver/PrinterHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile b/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile index 6f97bee2c..b9ec2ebaf 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/StillImageHost/doxyfile b/Demos/Host/ClassDriver/StillImageHost/doxyfile index 7eca05a94..248d6ba53 100644 --- a/Demos/Host/ClassDriver/StillImageHost/doxyfile +++ b/Demos/Host/ClassDriver/StillImageHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile b/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile index df50a03e9..f56f68343 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile +++ b/Demos/Host/ClassDriver/VirtualSerialHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile b/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile index 6fd6211d3..5830257c6 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/AudioInputHost/doxyfile b/Demos/Host/LowLevel/AudioInputHost/doxyfile index dda008658..9b6c8c0db 100644 --- a/Demos/Host/LowLevel/AudioInputHost/doxyfile +++ b/Demos/Host/LowLevel/AudioInputHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/AudioOutputHost/doxyfile b/Demos/Host/LowLevel/AudioOutputHost/doxyfile index c27221c69..0bcfcb84a 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/doxyfile +++ b/Demos/Host/LowLevel/AudioOutputHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/GenericHIDHost/doxyfile b/Demos/Host/LowLevel/GenericHIDHost/doxyfile index 1a8704264..205b751c9 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/doxyfile +++ b/Demos/Host/LowLevel/GenericHIDHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile b/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile index e8f82b8fe..4a4f2b556 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile +++ b/Demos/Host/LowLevel/JoystickHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/KeyboardHost/doxyfile b/Demos/Host/LowLevel/KeyboardHost/doxyfile index 968ab03f1..73b81ab26 100644 --- a/Demos/Host/LowLevel/KeyboardHost/doxyfile +++ b/Demos/Host/LowLevel/KeyboardHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile b/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile index 084a65242..c47c9daea 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/MIDIHost/doxyfile b/Demos/Host/LowLevel/MIDIHost/doxyfile index 7a6906a27..75327a0c3 100644 --- a/Demos/Host/LowLevel/MIDIHost/doxyfile +++ b/Demos/Host/LowLevel/MIDIHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/MassStorageHost/doxyfile b/Demos/Host/LowLevel/MassStorageHost/doxyfile index 58657165c..e580adbcf 100644 --- a/Demos/Host/LowLevel/MassStorageHost/doxyfile +++ b/Demos/Host/LowLevel/MassStorageHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/MouseHost/doxyfile b/Demos/Host/LowLevel/MouseHost/doxyfile index a025dd58d..064e055f4 100644 --- a/Demos/Host/LowLevel/MouseHost/doxyfile +++ b/Demos/Host/LowLevel/MouseHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/MouseHostWithParser/doxyfile b/Demos/Host/LowLevel/MouseHostWithParser/doxyfile index f12fda279..6e99c1a7f 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/doxyfile +++ b/Demos/Host/LowLevel/MouseHostWithParser/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/PrinterHost/doxyfile b/Demos/Host/LowLevel/PrinterHost/doxyfile index 3fcf03b2b..b0f3921b0 100644 --- a/Demos/Host/LowLevel/PrinterHost/doxyfile +++ b/Demos/Host/LowLevel/PrinterHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile b/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile index 50e1cc59a..28fdef033 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile +++ b/Demos/Host/LowLevel/RNDISEthernetHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/StillImageHost/doxyfile b/Demos/Host/LowLevel/StillImageHost/doxyfile index 7eca05a94..248d6ba53 100644 --- a/Demos/Host/LowLevel/StillImageHost/doxyfile +++ b/Demos/Host/LowLevel/StillImageHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. diff --git a/Demos/Host/LowLevel/VirtualSerialHost/doxyfile b/Demos/Host/LowLevel/VirtualSerialHost/doxyfile index df50a03e9..f56f68343 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/doxyfile +++ b/Demos/Host/LowLevel/VirtualSerialHost/doxyfile @@ -1,4 +1,4 @@ -# Doxyfile 1.8.9 +# Doxyfile 1.8.16 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -17,11 +17,11 @@ # Project related configuration options #--------------------------------------------------------------------------- -# This tag specifies the encoding used for all characters in the config file -# that follow. The default is UTF-8 which is also the encoding used for all text -# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv -# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv -# for the list of possible encodings. +# This tag specifies the encoding used for all characters in the configuration +# file that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# https://www.gnu.org/software/libiconv/ for the list of possible encodings. # The default value is: UTF-8. DOXYFILE_ENCODING = UTF-8 @@ -93,6 +93,14 @@ ALLOW_UNICODE_NAMES = NO OUTPUT_LANGUAGE = English +# The OUTPUT_TEXT_DIRECTION tag is used to specify the direction in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all generated output in the proper direction. +# Possible values are: None, LTR, RTL and Context. +# The default value is: None. + +OUTPUT_TEXT_DIRECTION = None + # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member # descriptions after the members that are listed in the file and class # documentation (similar to Javadoc). Set to NO to disable this. @@ -189,6 +197,16 @@ SHORT_NAMES = YES JAVADOC_AUTOBRIEF = NO +# If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line +# such as +# /*************** +# as being the beginning of a Javadoc-style comment "banner". If set to NO, the +# Javadoc-style will behave just like regular comments and it will not be +# interpreted by doxygen. +# The default value is: NO. + +JAVADOC_BANNER = NO + # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first # line (until the first dot) of a Qt-style comment as the brief description. If # set to NO, the Qt-style will behave just like regular Qt-style comments (thus @@ -236,7 +254,12 @@ TAB_SIZE = 4 # will allow you to put the command \sideeffect (or @sideeffect) in the # documentation, which will result in a user-defined paragraph with heading # "Side Effects:". You can put \n's in the value part of an alias to insert -# newlines. +# newlines (in the resulting output). You can put ^^ in the value part of an +# alias to insert a newline as if a physical newline was in the original file. +# When you need a literal { or } or , in the value part of an alias you have to +# escape them by means of a backslash (\), this can lead to conflicts with the +# commands \{ and \} for these it is advised to use the version @{ and @} or use +# a double escape (\\{ and \\}) ALIASES = @@ -274,17 +297,26 @@ OPTIMIZE_FOR_FORTRAN = NO OPTIMIZE_OUTPUT_VHDL = NO +# Set the OPTIMIZE_OUTPUT_SLICE tag to YES if your project consists of Slice +# sources only. Doxygen will then generate output that is more tailored for that +# language. For instance, namespaces will be presented as modules, types will be +# separated into more groups, etc. +# The default value is: NO. + +OPTIMIZE_OUTPUT_SLICE = NO + # Doxygen selects the parser to use depending on the extension of the files it # parses. With this tag you can assign which parser to use for a given # extension. Doxygen has a built-in mapping, but you can override or extend it # using this tag. The format is ext=language, where ext is a file extension, and # language is one of the parsers supported by doxygen: IDL, Java, Javascript, -# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran: -# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran: -# Fortran. In the later case the parser tries to guess whether the code is fixed -# or free formatted code, this is the default for Fortran type files), VHDL. For -# instance to make doxygen treat .inc files as Fortran files (default is PHP), -# and .f files as C (default is Fortran), use: inc=Fortran f=C. +# Csharp (C#), C, C++, D, PHP, md (Markdown), Objective-C, Python, Slice, +# Fortran (fixed format Fortran: FortranFixed, free formatted Fortran: +# FortranFree, unknown formatted Fortran: Fortran. In the later case the parser +# tries to guess whether the code is fixed or free formatted code, this is the +# default for Fortran type files), VHDL, tcl. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is +# Fortran), use: inc=Fortran f=C. # # Note: For files without extension you can use no_extension as a placeholder. # @@ -295,7 +327,7 @@ EXTENSION_MAPPING = # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments # according to the Markdown format, which allows for more readable -# documentation. See http://daringfireball.net/projects/markdown/ for details. +# documentation. See https://daringfireball.net/projects/markdown/ for details. # The output of markdown processing is further processed by doxygen, so you can # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in # case of backward compatibilities issues. @@ -303,6 +335,15 @@ EXTENSION_MAPPING = MARKDOWN_SUPPORT = NO +# When the TOC_INCLUDE_HEADINGS tag is set to a non-zero value, all headings up +# to that level are automatically included in the table of contents, even if +# they do not have an id attribute. +# Note: This feature currently applies only to Markdown headings. +# Minimum value: 0, maximum value: 99, default value: 5. +# This tag requires that the tag MARKDOWN_SUPPORT is set to YES. + +TOC_INCLUDE_HEADINGS = 5 + # When enabled doxygen tries to link words that correspond to documented # classes, or namespaces to their corresponding documentation. Such a link can # be prevented in individual cases by putting a % sign in front of the word or @@ -328,7 +369,7 @@ BUILTIN_STL_SUPPORT = NO CPP_CLI_SUPPORT = NO # Set the SIP_SUPPORT tag to YES if your project consists of sip (see: -# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen +# https://www.riverbankcomputing.com/software/sip/intro) sources only. Doxygen # will parse them like normal C++ but will assume all classes use public instead # of private inheritance when no explicit protection keyword is present. # The default value is: NO. @@ -353,6 +394,13 @@ IDL_PROPERTY_SUPPORT = YES DISTRIBUTE_GROUP_DOC = NO +# If one adds a struct or class to a group and this option is enabled, then also +# any nested class or struct is added to the same group. By default this option +# is disabled and one has to add nested compounds explicitly via \ingroup. +# The default value is: NO. + +GROUP_NESTED_COMPOUNDS = NO + # Set the SUBGROUPING tag to YES to allow class member groups of the same type # (for instance a group of public functions) to be put as a subgroup of that # type (e.g. under the Public Functions section). Set it to NO to prevent @@ -427,6 +475,12 @@ EXTRACT_ALL = YES EXTRACT_PRIVATE = YES +# If the EXTRACT_PRIV_VIRTUAL tag is set to YES, documented private virtual +# methods of a class will be included in the documentation. +# The default value is: NO. + +EXTRACT_PRIV_VIRTUAL = NO + # If the EXTRACT_PACKAGE tag is set to YES, all members with package or internal # scope will be included in the documentation. # The default value is: NO. @@ -505,7 +559,7 @@ INTERNAL_DOCS = NO # names in lower-case letters. If set to YES, upper-case letters are also # allowed. This is useful if you have classes or files whose names only differ # in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. +# (including Cygwin) ands Mac users are advised to set this option to NO. # The default value is: system dependent. CASE_SENSE_NAMES = NO @@ -692,7 +746,7 @@ LAYOUT_FILE = # The CITE_BIB_FILES tag can be used to specify one or more bib files containing # the reference definitions. This must be a list of .bib files. The .bib # extension is automatically appended if omitted. This requires the bibtex tool -# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info. +# to be installed. See also https://en.wikipedia.org/wiki/BibTeX for more info. # For LaTeX the style of the bibliography can be controlled using # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the # search path. See also \cite for info how to create references. @@ -737,11 +791,18 @@ WARN_IF_DOC_ERROR = YES # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that # are documented, but have no documentation for their parameters or return # value. If set to NO, doxygen will only warn about wrong or incomplete -# parameter documentation, but not about the absence of documentation. +# parameter documentation, but not about the absence of documentation. If +# EXTRACT_ALL is set to YES then this flag will automatically be disabled. # The default value is: NO. WARN_NO_PARAMDOC = YES +# If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when +# a warning is encountered. +# The default value is: NO. + +WARN_AS_ERROR = NO + # The WARN_FORMAT tag determines the format of the warning messages that doxygen # can produce. The string should contain the $file, $line, and $text tags, which # will be replaced by the file and line number from which the warning originated @@ -765,7 +826,7 @@ WARN_LOGFILE = # The INPUT tag is used to specify the files and/or directories that contain # documented source files. You may enter file names like myfile.cpp or # directories like /usr/src/myproject. Separate the files or directories with -# spaces. +# spaces. See also FILE_PATTERNS and EXTENSION_MAPPING # Note: If this tag is empty the current directory is searched. INPUT = ./ @@ -773,7 +834,7 @@ INPUT = ./ # This tag can be used to specify the character encoding of the source files # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses # libiconv (or the iconv built into libc) for the transcoding. See the libiconv -# documentation (see: http://www.gnu.org/software/libiconv) for the list of +# documentation (see: https://www.gnu.org/software/libiconv/) for the list of # possible encodings. # The default value is: UTF-8. @@ -781,12 +842,17 @@ INPUT_ENCODING = UTF-8 # If the value of the INPUT tag contains directories, you can use the # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and -# *.h) to filter out the source-files in the directories. If left blank the -# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii, -# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp, -# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown, -# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, -# *.qsf, *.as and *.js. +# *.h) to filter out the source-files in the directories. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# read by doxygen. +# +# If left blank the following patterns are tested:*.c, *.cc, *.cxx, *.cpp, +# *.c++, *.java, *.ii, *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, +# *.hh, *.hxx, *.hpp, *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, +# *.m, *.markdown, *.md, *.mm, *.dox, *.py, *.pyw, *.f90, *.f95, *.f03, *.f08, +# *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf, *.qsf and *.ice. FILE_PATTERNS = *.h \ *.c \ @@ -875,6 +941,10 @@ IMAGE_PATH = # Note that the filter must not add or remove lines; it is applied before the # code is scanned, but not when the output code is generated. If lines are added # or removed, the anchors will not be placed correctly. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. INPUT_FILTER = @@ -884,6 +954,10 @@ INPUT_FILTER = # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how # filters are used. If the FILTER_PATTERNS tag is empty or if none of the # patterns match the file name, INPUT_FILTER is applied. +# +# Note that for custom extensions or not directly supported extensions you also +# need to set EXTENSION_MAPPING for the extension otherwise the files are not +# properly processed by doxygen. FILTER_PATTERNS = @@ -936,7 +1010,7 @@ INLINE_SOURCES = NO STRIP_CODE_COMMENTS = YES # If the REFERENCED_BY_RELATION tag is set to YES then for each documented -# function all documented functions referencing it will be listed. +# entity all documented functions referencing it will be listed. # The default value is: NO. REFERENCED_BY_RELATION = NO @@ -968,12 +1042,12 @@ SOURCE_TOOLTIPS = YES # If the USE_HTAGS tag is set to YES then the references to source code will # point to the HTML generated by the htags(1) tool instead of doxygen built-in # source browser. The htags tool is part of GNU's global source tagging system -# (see http://www.gnu.org/software/global/global.html). You will need version +# (see https://www.gnu.org/software/global/global.html). You will need version # 4.8.6 or higher. # # To use it do the following: # - Install the latest version of global -# - Enable SOURCE_BROWSER and USE_HTAGS in the config file +# - Enable SOURCE_BROWSER and USE_HTAGS in the configuration file # - Make sure the INPUT points to the root of the source tree # - Run doxygen as normal # @@ -1001,7 +1075,7 @@ VERBATIM_HEADERS = NO # rich C++ code for which doxygen's built-in parser lacks the necessary type # information. # Note: The availability of this option depends on whether or not doxygen was -# compiled with the --with-libclang option. +# generated with the -Duse_libclang=ON option for CMake. # The default value is: NO. CLANG_ASSISTED_PARSING = NO @@ -1014,6 +1088,16 @@ CLANG_ASSISTED_PARSING = NO CLANG_OPTIONS = +# If clang assisted parsing is enabled you can provide the clang parser with the +# path to the compilation database (see: +# http://clang.llvm.org/docs/HowToSetupToolingForLLVM.html) used when the files +# were built. This is equivalent to specifying the "-p" option to a clang tool, +# such as clang-check. These options will then be passed to the parser. +# Note: The availability of this option depends on whether or not doxygen was +# generated with the -Duse_libclang=ON option for CMake. + +CLANG_DATABASE_PATH = + #--------------------------------------------------------------------------- # Configuration options related to the alphabetical class index #--------------------------------------------------------------------------- @@ -1132,7 +1216,7 @@ HTML_EXTRA_FILES = # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen # will adjust the colors in the style sheet and background images according to # this color. Hue is specified as an angle on a colorwheel, see -# http://en.wikipedia.org/wiki/Hue for more information. For instance the value +# https://en.wikipedia.org/wiki/Hue for more information. For instance the value # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300 # purple, and 360 is red again. # Minimum value: 0, maximum value: 359, default value: 220. @@ -1161,12 +1245,24 @@ HTML_COLORSTYLE_GAMMA = 80 # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML # page will contain the date and time when the page was generated. Setting this -# to NO can help when comparing the output of multiple runs. -# The default value is: YES. +# to YES can help to show when doxygen was last run and thus if the +# documentation is up to date. +# The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. HTML_TIMESTAMP = NO +# If the HTML_DYNAMIC_MENUS tag is set to YES then the generated HTML +# documentation will contain a main index with vertical navigation menus that +# are dynamically created via Javascript. If disabled, the navigation index will +# consists of multiple levels of tabs that are statically embedded in every HTML +# page. Disable this option to support browsers that do not have Javascript, +# like the Qt help browser. +# The default value is: YES. +# This tag requires that the tag GENERATE_HTML is set to YES. + +HTML_DYNAMIC_MENUS = YES + # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the # page has loaded. @@ -1190,13 +1286,13 @@ HTML_INDEX_NUM_ENTRIES = 100 # If the GENERATE_DOCSET tag is set to YES, additional index files will be # generated that can be used as input for Apple's Xcode 3 integrated development -# environment (see: http://developer.apple.com/tools/xcode/), introduced with -# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a +# environment (see: https://developer.apple.com/xcode/), introduced with OSX +# 10.5 (Leopard). To create a documentation set, doxygen will generate a # Makefile in the HTML output directory. Running make will produce the docset in # that directory and running make install will install the docset in # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at -# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html -# for more information. +# startup. See https://developer.apple.com/library/archive/featuredarticles/Doxy +# genXcode/_index.html for more information. # The default value is: NO. # This tag requires that the tag GENERATE_HTML is set to YES. @@ -1235,7 +1331,7 @@ DOCSET_PUBLISHER_NAME = Publisher # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three # additional HTML index files: index.hhp, index.hhc, and index.hhk. The # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop -# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on +# (see: https://www.microsoft.com/en-us/download/details.aspx?id=21138) on # Windows. # # The HTML Help Workshop contains a compiler that can convert all HTML output @@ -1311,7 +1407,7 @@ QCH_FILE = # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help # Project output. For more information please see Qt Help Project / Namespace -# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace). +# (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#namespace). # The default value is: org.doxygen.Project. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1319,7 +1415,7 @@ QHP_NAMESPACE = org.doxygen.Project # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt # Help Project output. For more information please see Qt Help Project / Virtual -# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual- +# Folders (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#virtual- # folders). # The default value is: doc. # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1328,7 +1424,7 @@ QHP_VIRTUAL_FOLDER = doc # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom # filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1336,7 +1432,7 @@ QHP_CUST_FILTER_NAME = # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the # custom filter to add. For more information please see Qt Help Project / Custom -# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom- +# Filters (see: https://doc.qt.io/archives/qt-4.8/qthelpproject.html#custom- # filters). # This tag requires that the tag GENERATE_QHP is set to YES. @@ -1344,7 +1440,7 @@ QHP_CUST_FILTER_ATTRS = # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this # project's filter section matches. Qt Help Project / Filter Attributes (see: -# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes). +# https://doc.qt.io/archives/qt-4.8/qthelpproject.html#filter-attributes). # This tag requires that the tag GENERATE_QHP is set to YES. QHP_SECT_FILTER_ATTRS = @@ -1437,7 +1533,7 @@ EXT_LINKS_IN_WINDOW = NO FORMULA_FONTSIZE = 10 -# Use the FORMULA_TRANPARENT tag to determine whether or not the images +# Use the FORMULA_TRANSPARENT tag to determine whether or not the images # generated for formulas are transparent PNGs. Transparent PNGs are not # supported properly for IE 6.0, but are supported on all modern browsers. # @@ -1449,7 +1545,7 @@ FORMULA_FONTSIZE = 10 FORMULA_TRANSPARENT = YES # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see -# http://www.mathjax.org) which uses client side Javascript for the rendering +# https://www.mathjax.org) which uses client side Javascript for the rendering # instead of using pre-rendered bitmaps. Use this if you do not have LaTeX # installed or if you want to formulas look prettier in the HTML output. When # enabled you may also need to install MathJax separately and configure the path @@ -1476,8 +1572,8 @@ MATHJAX_FORMAT = HTML-CSS # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax # Content Delivery Network so you can quickly see the result without installing # MathJax. However, it is strongly recommended to install a local copy of -# MathJax from http://www.mathjax.org before deployment. -# The default value is: http://cdn.mathjax.org/mathjax/latest. +# MathJax from https://www.mathjax.org before deployment. +# The default value is: https://cdnjs.cloudflare.com/ajax/libs/mathjax/2.7.5/. # This tag requires that the tag USE_MATHJAX is set to YES. MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest @@ -1538,7 +1634,7 @@ SERVER_BASED_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). +# Xapian (see: https://xapian.org/). # # See the section "External Indexing and Searching" for details. # The default value is: NO. @@ -1551,7 +1647,7 @@ EXTERNAL_SEARCH = NO # # Doxygen ships with an example indexer (doxyindexer) and search engine # (doxysearch.cgi) which are based on the open source search engine library -# Xapian (see: http://xapian.org/). See the section "External Indexing and +# Xapian (see: https://xapian.org/). See the section "External Indexing and # Searching" for details. # This tag requires that the tag SEARCHENGINE is set to YES. @@ -1603,21 +1699,35 @@ LATEX_OUTPUT = latex # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be # invoked. # -# Note that when enabling USE_PDFLATEX this option is only used for generating -# bitmaps for formulas in the HTML output, but not in the Makefile that is -# written to the output directory. -# The default file is: latex. +# Note that when not enabling USE_PDFLATEX the default is latex when enabling +# USE_PDFLATEX the default is pdflatex and when in the later case latex is +# chosen this is overwritten by pdflatex. For specific output languages the +# default can have been set differently, this depends on the implementation of +# the output language. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_CMD_NAME = latex # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate # index for LaTeX. +# Note: This tag is used in the Makefile / make.bat. +# See also: LATEX_MAKEINDEX_CMD for the part in the generated output file +# (.tex). # The default file is: makeindex. # This tag requires that the tag GENERATE_LATEX is set to YES. MAKEINDEX_CMD_NAME = makeindex +# The LATEX_MAKEINDEX_CMD tag can be used to specify the command name to +# generate index for LaTeX. In case there is no backslash (\) as first character +# it will be automatically added in the LaTeX code. +# Note: This tag is used in the generated output file (.tex). +# See also: MAKEINDEX_CMD_NAME for the part in the Makefile / make.bat. +# The default value is: makeindex. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_MAKEINDEX_CMD = makeindex + # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX # documents. This may be useful for small projects and may help to save some # trees in general. @@ -1636,9 +1746,12 @@ COMPACT_LATEX = NO PAPER_TYPE = a4wide # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names -# that should be included in the LaTeX output. To get the times font for -# instance you can specify -# EXTRA_PACKAGES=times +# that should be included in the LaTeX output. The package can be specified just +# by its name or with the correct syntax as to be used with the LaTeX +# \usepackage command. To get the times font for instance you can specify : +# EXTRA_PACKAGES=times or EXTRA_PACKAGES={times} +# To use the option intlimits with the amsmath package you can specify: +# EXTRA_PACKAGES=[intlimits]{amsmath} # If left blank no extra packages will be included. # This tag requires that the tag GENERATE_LATEX is set to YES. @@ -1735,12 +1848,28 @@ LATEX_SOURCE_CODE = NO # The LATEX_BIB_STYLE tag can be used to specify the style to use for the # bibliography, e.g. plainnat, or ieeetr. See -# http://en.wikipedia.org/wiki/BibTeX and \cite for more info. +# https://en.wikipedia.org/wiki/BibTeX and \cite for more info. # The default value is: plain. # This tag requires that the tag GENERATE_LATEX is set to YES. LATEX_BIB_STYLE = plain +# If the LATEX_TIMESTAMP tag is set to YES then the footer of each generated +# page will contain the date and time when the page was generated. Setting this +# to NO can help when comparing the output of multiple runs. +# The default value is: NO. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_TIMESTAMP = NO + +# The LATEX_EMOJI_DIRECTORY tag is used to specify the (relative or absolute) +# path from which the emoji images will be read. If a relative path is entered, +# it will be relative to the LATEX_OUTPUT directory. If left blank the +# LATEX_OUTPUT directory will be used. +# This tag requires that the tag GENERATE_LATEX is set to YES. + +LATEX_EMOJI_DIRECTORY = + #--------------------------------------------------------------------------- # Configuration options related to the RTF output #--------------------------------------------------------------------------- @@ -1780,9 +1909,9 @@ COMPACT_RTF = NO RTF_HYPERLINKS = NO -# Load stylesheet definitions from file. Syntax is similar to doxygen's config -# file, i.e. a series of assignments. You only have to provide replacements, -# missing definitions are set to their default value. +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# configuration file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. # # See also section "Doxygen usage" for information on how to generate the # default style sheet that doxygen normally uses. @@ -1791,8 +1920,8 @@ RTF_HYPERLINKS = NO RTF_STYLESHEET_FILE = # Set optional variables used in the generation of an RTF document. Syntax is -# similar to doxygen's config file. A template extensions file can be generated -# using doxygen -e rtf extensionFile. +# similar to doxygen's configuration file. A template extensions file can be +# generated using doxygen -e rtf extensionFile. # This tag requires that the tag GENERATE_RTF is set to YES. RTF_EXTENSIONS_FILE = @@ -1878,6 +2007,13 @@ XML_OUTPUT = xml XML_PROGRAMLISTING = YES +# If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include +# namespace members in file scope as well, matching the HTML output. +# The default value is: NO. +# This tag requires that the tag GENERATE_XML is set to YES. + +XML_NS_MEMB_FILE_SCOPE = NO + #--------------------------------------------------------------------------- # Configuration options related to the DOCBOOK output #--------------------------------------------------------------------------- @@ -1910,9 +2046,9 @@ DOCBOOK_PROGRAMLISTING = NO #--------------------------------------------------------------------------- # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an -# AutoGen Definitions (see http://autogen.sf.net) file that captures the -# structure of the code including all documentation. Note that this feature is -# still experimental and incomplete at the moment. +# AutoGen Definitions (see http://autogen.sourceforge.net/) file that captures +# the structure of the code including all documentation. Note that this feature +# is still experimental and incomplete at the moment. # The default value is: NO. GENERATE_AUTOGEN_DEF = NO @@ -2080,12 +2216,6 @@ EXTERNAL_GROUPS = YES EXTERNAL_PAGES = YES -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of 'which perl'). -# The default file (with absolute path) is: /usr/bin/perl. - -PERL_PATH = /usr/bin/perl - #--------------------------------------------------------------------------- # Configuration options related to the dot tool #--------------------------------------------------------------------------- @@ -2099,15 +2229,6 @@ PERL_PATH = /usr/bin/perl CLASS_DIAGRAMS = NO -# You can define message sequence charts within doxygen comments using the \msc -# command. Doxygen will then run the mscgen tool (see: -# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the -# documentation. The MSCGEN_PATH tag allows you to specify the directory where -# the mscgen tool resides. If left empty the tool is assumed to be found in the -# default search path. - -MSCGEN_PATH = - # You can include diagrams made with dia in doxygen documentation. Doxygen will # then run dia to produce the diagram and insert it in the documentation. The # DIA_PATH tag allows you to specify the directory where the dia binary resides. @@ -2240,7 +2361,8 @@ INCLUDED_BY_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. +# functions only using the \callgraph command. Disabling a call graph can be +# accomplished by means of the command \hidecallgraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2251,7 +2373,8 @@ CALL_GRAPH = NO # # Note that enabling this option will significantly increase the time of a run. # So in most cases it will be better to enable caller graphs for selected -# functions only using the \callergraph command. +# functions only using the \callergraph command. Disabling a caller graph can be +# accomplished by means of the command \hidecallergraph. # The default value is: NO. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2274,11 +2397,15 @@ GRAPHICAL_HIERARCHY = NO DIRECTORY_GRAPH = NO # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. +# generated by dot. For an explanation of the image formats see the section +# output formats in the documentation of the dot tool (Graphviz (see: +# http://www.graphviz.org/)). # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order # to make the SVG files visible in IE 9+ (other browsers do not have this # requirement). -# Possible values are: png, jpg, gif and svg. +# Possible values are: png, jpg, gif, svg, png:gd, png:gd:gd, png:cairo, +# png:cairo:gd, png:cairo:cairo, png:cairo:gdiplus, png:gdiplus and +# png:gdiplus:gdiplus. # The default value is: png. # This tag requires that the tag HAVE_DOT is set to YES. @@ -2329,6 +2456,11 @@ DIAFILE_DIRS = PLANTUML_JAR_PATH = +# When using plantuml, the PLANTUML_CFG_FILE tag can be used to specify a +# configuration file for plantuml. + +PLANTUML_CFG_FILE = + # When using plantuml, the specified paths are searched for files specified by # the !include statement in a plantuml block. |