diff options
Diffstat (limited to 'Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt')
-rw-r--r-- | Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt | 132 |
1 files changed, 66 insertions, 66 deletions
diff --git a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt index bb494cfbe..74578b6e2 100644 --- a/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt +++ b/Demos/Host/LowLevel/MassStorageHost/MassStorageHost.txt @@ -1,67 +1,67 @@ -/** \file
- *
- * This file contains special DoxyGen information for the generation of the main page and other special
- * documentation pages. It is not a project source file.
- */
-
-/** \mainpage Mass Storage Host Demo
- *
- * \section SSec_Compat Demo Compatibility:
- *
- * The following list indicates what microcontrollers are compatible with this demo.
- *
- * - Series 7 USB AVRs
- *
- * \section SSec_Info USB Information:
- *
- * The following table gives a rundown of the USB utilization of this demo.
- *
- * <table>
- * <tr>
- * <td><b>USB Mode:</b></td>
- * <td>Host</td>
- * </tr>
- * <tr>
- * <td><b>USB Class:</b></td>
- * <td>Mass Storage Device</td>
- * </tr>
- * <tr>
- * <td><b>USB Subclass:</b></td>
- * <td>Bulk Only</td>
- * </tr>
- * <tr>
- * <td><b>Relevant Standards:</b></td>
- * <td>USBIF Mass Storage Standard \n
- * USB Bulk-Only Transport Standard \n
- * SCSI Primary Commands Specification \n
- * SCSI Block Commands Specification</td>
- * </tr>
- * <tr>
- * <td><b>Usable Speeds:</b></td>
- * <td>Full Speed Mode</td>
- * </tr>
- * </table>
- *
- * \section SSec_Description Project Description:
- *
- * Mass Storage host demonstration application. This gives a simple reference
- * application for implementing a USB Mass Storage host, for USB storage devices
- * using the standard Mass Storage USB profile.
- *
- * The first 512 bytes (boot sector) of an attached disk's memory will be dumped
- * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287
- * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents
- * of the disk will be dumped to the serial port.
- *
- * \section SSec_Options Project Options
- *
- * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
- *
- * <table>
- * <tr>
- * <td>
- * None
- * </td>
- * </tr>
- * </table>
+/** \file + * + * This file contains special DoxyGen information for the generation of the main page and other special + * documentation pages. It is not a project source file. + */ + +/** \mainpage Mass Storage Host Demo + * + * \section SSec_Compat Demo Compatibility: + * + * The following list indicates what microcontrollers are compatible with this demo. + * + * - Series 7 USB AVRs + * + * \section SSec_Info USB Information: + * + * The following table gives a rundown of the USB utilization of this demo. + * + * <table> + * <tr> + * <td><b>USB Mode:</b></td> + * <td>Host</td> + * </tr> + * <tr> + * <td><b>USB Class:</b></td> + * <td>Mass Storage Device</td> + * </tr> + * <tr> + * <td><b>USB Subclass:</b></td> + * <td>Bulk Only</td> + * </tr> + * <tr> + * <td><b>Relevant Standards:</b></td> + * <td>USBIF Mass Storage Standard \n + * USB Bulk-Only Transport Standard \n + * SCSI Primary Commands Specification \n + * SCSI Block Commands Specification</td> + * </tr> + * <tr> + * <td><b>Usable Speeds:</b></td> + * <td>Full Speed Mode</td> + * </tr> + * </table> + * + * \section SSec_Description Project Description: + * + * Mass Storage host demonstration application. This gives a simple reference + * application for implementing a USB Mass Storage host, for USB storage devices + * using the standard Mass Storage USB profile. + * + * The first 512 bytes (boot sector) of an attached disk's memory will be dumped + * out of the serial port in HEX and ASCII form when it is attached to the AT90USB1287 + * AVR. The device will then wait for HWB to be pressed, whereupon the entire ASCII contents + * of the disk will be dumped to the serial port. + * + * \section SSec_Options Project Options + * + * The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value. + * + * <table> + * <tr> + * <td> + * None + * </td> + * </tr> + * </table> */
\ No newline at end of file |