diff options
Diffstat (limited to 'Demos/Device')
10 files changed, 127 insertions, 9 deletions
diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c index 5e0a82be2..ac6c9e7c7 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.c @@ -113,6 +113,9 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) case SCSI_CMD_READ_10: CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; case SCSI_CMD_TEST_UNIT_READY: case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: case SCSI_CMD_VERIFY_10: @@ -281,6 +284,17 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa uint32_t BlockAddress; uint16_t TotalBlocks; + /* Check if the disk is write protected or not */ + if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, + SCSI_ASENSE_WRITE_PROTECTED, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); @@ -302,7 +316,7 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa /* Adjust the given block address to the real media address based on the selected LUN */ BlockAddress += ((uint32_t)MSInterfaceInfo->State.CommandBlock.LUN * LUN_MEDIA_BLOCKS); #endif - + /* Determine if the packet is a READ (10) or WRITE (10) command, call appropriate function */ if (IsDataRead == DATA_READ) DataflashManager_ReadBlocks(MSInterfaceInfo, BlockAddress, TotalBlocks); @@ -315,3 +329,24 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa return true; } +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00); + Endpoint_Write_Byte(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} diff --git a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h index e8f5eb65e..6f2e19d39 100644 --- a/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorage/Lib/SCSI.h @@ -81,6 +81,7 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); #endif #endif diff --git a/Demos/Device/ClassDriver/MassStorage/MassStorage.h b/Demos/Device/ClassDriver/MassStorage/MassStorage.h index f7ac3636f..63a864288 100644 --- a/Demos/Device/ClassDriver/MassStorage/MassStorage.h +++ b/Demos/Device/ClassDriver/MassStorage/MassStorage.h @@ -73,6 +73,9 @@ /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + + /** Indicates if the disk is write protected or not. */ + #define DISK_READ_ONLY false /* Function Prototypes: */ void SetupHardware(void); diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h index 3db19dad4..d7f8605be 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/DataflashManager.h @@ -63,12 +63,6 @@ /** Total number of blocks of the virtual memory for reporting to the host as the device's total capacity. */ #define VIRTUAL_MEMORY_BLOCKS (VIRTUAL_MEMORY_BYTES / VIRTUAL_MEMORY_BLOCK_SIZE) - /** Total number of logical drives within the device - must be non-zero. */ - #define TOTAL_LUNS 1 - - /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ - #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) - /* Function Prototypes: */ void DataflashManager_WriteBlocks(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const uint32_t BlockAddress, diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c index 5e0a82be2..5d0adf90a 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.c @@ -113,6 +113,9 @@ bool SCSI_DecodeSCSICommand(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) case SCSI_CMD_READ_10: CommandSuccess = SCSI_Command_ReadWrite_10(MSInterfaceInfo, DATA_READ); break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(MSInterfaceInfo); + break; case SCSI_CMD_TEST_UNIT_READY: case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: case SCSI_CMD_VERIFY_10: @@ -281,6 +284,17 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa uint32_t BlockAddress; uint16_t TotalBlocks; + /* Check if the disk is write protected or not */ + if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, + SCSI_ASENSE_WRITE_PROTECTED, + SCSI_ASENSEQ_NO_QUALIFIER); + + return false; + } + /* Load in the 32-bit block address (SCSI uses big-endian, so have to reverse the byte order) */ BlockAddress = SwapEndian_32(*(uint32_t*)&MSInterfaceInfo->State.CommandBlock.SCSICommandData[2]); @@ -315,3 +329,24 @@ static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfa return true; } +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \param[in] MSInterfaceInfo Pointer to the Mass Storage class interface structure that the command is associated with + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00); + Endpoint_Write_Byte(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + MSInterfaceInfo->State.CommandBlock.DataTransferLength -= 4; + + return true; +} diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h index bab018cc5..9a5bd802c 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Lib/SCSI.h @@ -81,6 +81,7 @@ static bool SCSI_Command_Send_Diagnostic(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); static bool SCSI_Command_ReadWrite_10(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo, const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(USB_ClassInfo_MS_Device_t* const MSInterfaceInfo); #endif #endif diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h index e07157a64..110953cbd 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/MassStorageKeyboard.h @@ -73,6 +73,15 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 + /** Total number of logical drives within the device - must be non-zero. */ + #define TOTAL_LUNS 1 + + /** Blocks in each LUN, calculated from the total capacity divided by the total number of Logical Units in the device. */ + #define LUN_MEDIA_BLOCKS (VIRTUAL_MEMORY_BLOCKS / TOTAL_LUNS) + + /** Indicates if the disk is write protected or not. */ + #define DISK_READ_ONLY false + /* Function Prototypes: */ void SetupHardware(void); diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c index 598c689fd..63f1ec3b4 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c @@ -111,6 +111,9 @@ bool SCSI_DecodeSCSICommand(void) case SCSI_CMD_READ_10: CommandSuccess = SCSI_Command_ReadWrite_10(DATA_READ); break; + case SCSI_CMD_MODE_SENSE_6: + CommandSuccess = SCSI_Command_ModeSense_6(); + break; case SCSI_CMD_TEST_UNIT_READY: case SCSI_CMD_PREVENT_ALLOW_MEDIUM_REMOVAL: case SCSI_CMD_VERIFY_10: @@ -278,9 +281,23 @@ static bool SCSI_Command_Send_Diagnostic(void) */ static bool SCSI_Command_ReadWrite_10(const bool IsDataRead) { - uint32_t BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]); - uint16_t TotalBlocks = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]); + uint32_t BlockAddress; + uint16_t TotalBlocks; + + /* Check if the disk is write protected or not */ + if ((IsDataRead == DATA_WRITE) && DISK_READ_ONLY) + { + /* Block address is invalid, update SENSE key and return command fail */ + SCSI_SET_SENSE(SCSI_SENSE_KEY_DATA_PROTECT, + SCSI_ASENSE_WRITE_PROTECTED, + SCSI_ASENSEQ_NO_QUALIFIER); + return false; + } + + BlockAddress = SwapEndian_32(*(uint32_t*)&CommandBlock.SCSICommandData[2]); + TotalBlocks = SwapEndian_16(*(uint16_t*)&CommandBlock.SCSICommandData[7]); + /* Check if the block address is outside the maximum allowable value for the LUN */ if (BlockAddress >= LUN_MEDIA_BLOCKS) { @@ -309,3 +326,22 @@ static bool SCSI_Command_ReadWrite_10(const bool IsDataRead) return true; } +/** Command processing for an issued SCSI MODE SENSE (6) command. This command returns various informational pages about + * the SCSI device, as well as the device's Write Protect status. + * + * \return Boolean true if the command completed successfully, false otherwise. + */ +static bool SCSI_Command_ModeSense_6(void) +{ + /* Send an empty header response with the Write Protect flag status */ + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(0x00); + Endpoint_Write_Byte(DISK_READ_ONLY ? 0x80 : 0x00); + Endpoint_Write_Byte(0x00); + Endpoint_ClearIN(); + + /* Update the bytes transferred counter and succeed the command */ + CommandBlock.DataTransferLength -= 4; + + return true; +} diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h index 962a2acf7..8710db88b 100644 --- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h +++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h @@ -143,6 +143,7 @@ static bool SCSI_Command_Read_Capacity_10(void); static bool SCSI_Command_Send_Diagnostic(void); static bool SCSI_Command_ReadWrite_10(const bool IsDataRead); + static bool SCSI_Command_ModeSense_6(void); #endif #endif diff --git a/Demos/Device/LowLevel/MassStorage/MassStorage.h b/Demos/Device/LowLevel/MassStorage/MassStorage.h index 0baa36944..d817075d8 100644 --- a/Demos/Device/LowLevel/MassStorage/MassStorage.h +++ b/Demos/Device/LowLevel/MassStorage/MassStorage.h @@ -68,6 +68,9 @@ /** LED mask for the library LED driver, to indicate that the USB interface is busy. */ #define LEDMASK_USB_BUSY LEDS_LED2 + /** Indicates if the disk is write protected or not. */ + #define DISK_READ_ONLY false + /* Global Variables: */ extern MS_CommandBlockWrapper_t CommandBlock; extern MS_CommandStatusWrapper_t CommandStatus; |