diff options
Diffstat (limited to 'Bootloaders')
| -rw-r--r-- | Bootloaders/CDC/BootloaderCDC.txt | 6 | ||||
| -rw-r--r-- | Bootloaders/DFU/BootloaderDFU.txt | 6 | ||||
| -rw-r--r-- | Bootloaders/HID/BootloaderHID.txt | 6 |
3 files changed, 9 insertions, 9 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index d6ab94516..276a0c9c4 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 * protocol compatible programming software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the USB1287, and will fit into 4KB of bootloader space. If - * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU - * values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space. + * If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB + * and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index d0811b2aa..e10beea36 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming * software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the USB1287, and should fit into 4KB of bootloader space. If - * you wish to enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU - * values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space. + * If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB + * and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt index a774ab485..d32efeeb7 100644 --- a/Bootloaders/HID/BootloaderHID.txt +++ b/Bootloaders/HID/BootloaderHID.txt @@ -51,10 +51,10 @@ * from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC * HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it. * - * Out of the box this bootloader builds for the USB1287, and will fit into 2KB of bootloader space for the + * Out of the box this bootloader builds for the AT90USB1287, and will fit into 2KB of bootloader space for the * Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for all other models. If you wish to - * enlarge this space and/or change the AVR model, you will need to edit the BOOT_START and MCU values in the - * accompanying makefile. + * enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB and + * BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * \section Sec_Installation Driver Installation * |