aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--LUFA/CodeTemplates/makefile_template.uc35
-rw-r--r--LUFA/CodeTemplates/makefile_template.xmega8
-rw-r--r--LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c2
-rw-r--r--LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c5
-rw-r--r--LUFA/Platform/UC3/ClockManagement.h17
-rw-r--r--LUFA/Platform/XMEGA/ClockManagement.h226
6 files changed, 172 insertions, 91 deletions
diff --git a/LUFA/CodeTemplates/makefile_template.uc3 b/LUFA/CodeTemplates/makefile_template.uc3
index 2077ca187..645f6c288 100644
--- a/LUFA/CodeTemplates/makefile_template.uc3
+++ b/LUFA/CodeTemplates/makefile_template.uc3
@@ -70,10 +70,7 @@ F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ###
# USB controller master clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU, as the USB clock is often sourced from the same oscillator as
-# the CPU clock, but run through multipliers and dividers to achieve the desired
-# clock rate.
+# input clock frequency of the USB controller's clock generator in Hz.
#
# For the UC3 chips, this should be equal to 48MHz or 96MHz.
F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ###
diff --git a/LUFA/CodeTemplates/makefile_template.xmega b/LUFA/CodeTemplates/makefile_template.xmega
index 2ceca1faa..719a107fd 100644
--- a/LUFA/CodeTemplates/makefile_template.xmega
+++ b/LUFA/CodeTemplates/makefile_template.xmega
@@ -86,12 +86,10 @@ F_CPU = ### INSERT PRESCALED SYSTEM CLOCK SPEED HERE, IN HZ ###
# USB controller master clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
-# input clock frequency (before any prescaling is performed) in Hz. This value may
-# differ from F_CPU, as the USB clock is often sourced from the same oscillator as
-# the CPU clock, but run through multipliers and dividers to achieve the desired
-# clock rate.
+# input clock frequency of the USB controller's clock generator in Hz.
#
-# For the UC3 chips, this should be equal to 48MHz or 96MHz.
+# For the XMEGA chips, this should be equal to a multiple of 6MHz for Low
+# Speed USB mode, or a multiple of 48MHz for Full Speed USB mode.
F_USB = ### INSERT CLOCK TO USB MODULE HERE, IN HZ ###
diff --git a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c
index 154020c41..daace9697 100644
--- a/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c
+++ b/LUFA/Drivers/USB/Core/XMEGA/Endpoint_XMEGA.c
@@ -43,7 +43,7 @@ bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
const uint8_t UECFG0XData,
const uint8_t UECFG1XData)
{
- // TODO
+ return false; // TODO
}
void Endpoint_ClearEndpoints(void)
diff --git a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c
index 2556ee858..c8839c9d0 100644
--- a/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c
+++ b/LUFA/Drivers/USB/Core/XMEGA/USBController_XMEGA.c
@@ -78,6 +78,11 @@ void USB_Disable(void)
void USB_ResetInterface(void)
{
+ if (USB_Options & USB_DEVICE_OPT_LOWSPEED)
+ CLK.USBCTRL = ((((F_USB / 6000000) - 1) << CLK_USBPSDIV_gp) | CLK_USBSRC_PLL_gc | CLK_USBEN_bm);
+ else
+ CLK.USBCTRL = ((((F_USB / 48000000) - 1) << CLK_USBPSDIV_gp) | CLK_USBSRC_PLL_gc | CLK_USBEN_bm);
+
USB_INT_DisableAllInterrupts();
USB_INT_ClearAllInterrupts();
diff --git a/LUFA/Platform/UC3/ClockManagement.h b/LUFA/Platform/UC3/ClockManagement.h
index d6fac358a..125a8a9b5 100644
--- a/LUFA/Platform/UC3/ClockManagement.h
+++ b/LUFA/Platform/UC3/ClockManagement.h
@@ -123,12 +123,12 @@
*
* \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
*/
- static inline uint8_t AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup) ATTR_ALWAYS_INLINE;
- static inline uint8_t AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup)
+ static inline bool AVR32CLK_StartExternalOscillator(const uint8_t Channel,
+ const uint8_t Type,
+ const uint8_t Startup) ATTR_ALWAYS_INLINE;
+ static inline bool AVR32CLK_StartExternalOscillator(const uint8_t Channel,
+ const uint8_t Type,
+ const uint8_t Startup)
{
switch (Channel)
{
@@ -162,6 +162,8 @@
/** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use.
*
+ * \note The output frequency must be equal to or greater than the source frequency.
+ *
* \param[in] Channel Index of the PLL to start.
* \param[in] Source Clock source for the PLL, a value from \ref UC3_System_ClockSource_t.
* \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.
@@ -178,6 +180,9 @@
const uint32_t SourceFreq,
const uint32_t Frequency)
{
+ if (SourceFreq > Frequency)
+ return false;
+
switch (Source)
{
case CLOCK_SRC_OSC0:
diff --git a/LUFA/Platform/XMEGA/ClockManagement.h b/LUFA/Platform/XMEGA/ClockManagement.h
index de531c298..9e6a0f4b1 100644
--- a/LUFA/Platform/XMEGA/ClockManagement.h
+++ b/LUFA/Platform/XMEGA/ClockManagement.h
@@ -53,7 +53,13 @@
*
* void main(void)
* {
- * [TODO]
+ * // Start the internal 32MHz RC oscillator and switch the CPU core to run from it
+ * AVR32CLK_StartInternalOscillator(CLOCK_SRC_INT_RC32MHZ);
+ * XMEGACLK_SetCPUClockSource(CLOCK_SRC_INT_RC32MHZ, F_CPU);
+ *
+ * // Start the external oscillator and multiply up the frequency
+ * AVR32CLK_StartExternalOscillator(EXOSC_FREQ_9MHZ_MAX, EXOSC_START_1KCLK);
+ * AVR32CLK_StartPLL(CLOCK_SRC_XOSC, 8000000, F_USB);
* }
* \endcode
*
@@ -73,13 +79,13 @@
/* Public Interface - May be used in end-application: */
/* Macros: */
- /** Enum for the possible external oscillator types. */
- enum XMEGA_Extern_OSC_ClockTypes_t
+ /** Enum for the possible external oscillator frequency ranges. */
+ enum XMEGA_Extern_OSC_ClockFrequency_t
{
- EXOSC_MODE_2MHZ_MAX = OSC_FRQRANGE_04TO2_gc, /**< External crystal oscillator equal to or slower than 2MHz. */
- EXOSC_MODE_9MHZ_MAX = OSC_FRQRANGE_2TO9_gc, /**< External crystal oscillator equal to or slower than 9MHz. */
- EXOSC_MODE_12MHZ_MAX = OSC_FRQRANGE_9TO12_gc, /**< External crystal oscillator equal to or slower than 12MHz. */
- EXOSC_MODE_16MHZ_MAX = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
+ EXOSC_FREQ_2MHZ_MAX = OSC_FRQRANGE_04TO2_gc, /**< External crystal oscillator equal to or slower than 2MHz. */
+ EXOSC_FREQ_9MHZ_MAX = OSC_FRQRANGE_2TO9_gc, /**< External crystal oscillator equal to or slower than 9MHz. */
+ EXOSC_FREQ_12MHZ_MAX = OSC_FRQRANGE_9TO12_gc, /**< External crystal oscillator equal to or slower than 12MHz. */
+ EXOSC_FREQ_16MHZ_MAX = OSC_FRQRANGE_12TO16_gc, /**< External crystal oscillator equal to or slower than 16MHz. */
};
/** Enum for the possible external oscillator statup times. */
@@ -103,113 +109,183 @@
};
/* Inline Functions: */
- /** Starts the given external oscillator of the UC3 microcontroller, with the given options. This routine blocks until
+ /** Starts the external oscillator of the XMEGA microcontroller, with the given options. This routine blocks until
* the oscillator is ready for use.
*
- * \param[in] Channel Index of the external oscillator to start.
- * \param[in] Type Type of clock attached to the given oscillator channel, a value from \ref XMEGA_Extern_OSC_ClockTypes_t.
- * \param[in] Startup Statup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
+ * \param[in] FreqRange Frequency range of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockFrequency_t.
+ * \param[in] Startup Statup time of the external oscillator, a value from \ref XMEGA_Extern_OSC_ClockStartup_t.
*
* \return Boolean \c true if the external oscillator was successfully started, \c false if invalid parameters specified.
*/
- static inline uint8_t AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup) ATTR_ALWAYS_INLINE;
- static inline uint8_t AVR32CLK_StartExternalOscillator(const uint8_t Channel,
- const uint8_t Type,
- const uint8_t Startup)
+ static inline bool AVR32CLK_StartExternalOscillator(const uint8_t FreqRange,
+ const uint8_t Startup) ATTR_ALWAYS_INLINE;
+ static inline bool AVR32CLK_StartExternalOscillator(const uint8_t FreqRange,
+ const uint8_t Startup)
{
- return false; // TODO
+ OSC.XOSCCTRL = (FreqRange | ((Startup == EXOSC_START_32KCLK) ? OSC_X32KLPM_bm : 0) | Startup);
+ OSC.CTRL |= OSC_XOSCEN_bm;
+
+ while (!(OSC.STATUS & OSC_XOSCRDY_bm));
+ return true;
}
- /** Stops the given external oscillator of the UC3 microcontroller.
- *
- * \param[in] Channel Index of the external oscillator to stop.
- */
- static inline void AVR32CLK_StopExternalOscillator(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopExternalOscillator(const uint8_t Channel)
+ /** Stops the external oscillator of the XMEGA microcontroller. */
+ static inline void AVR32CLK_StopExternalOscillator(void) ATTR_ALWAYS_INLINE;
+ static inline void AVR32CLK_StopExternalOscillator(void)
{
- return; // TODO
+ OSC.CTRL &= ~OSC_XOSCEN_bm;
}
- /** Starts the given PLL of the UC3 microcontroller, with the given options. This routine blocks until the PLL is ready for use.
+ /** Starts the given internal oscillator of the XMEGA microcontroller, with the given options. This routine blocks until
+ * the oscillator is ready for use.
*
- * \param[in] Channel Index of the PLL to start.
- * \param[in] Source Clock source for the PLL, a value from \ref XMEGA_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.
- * \param[in] Frequency Target frequency of the PLL's output.
+ * \param[in] Source Internal oscillator to start, a value from \ref XMEGA_System_ClockSource_t.
*
- * \return Boolean \c true if the PLL was successfully started, \c false if invalid parameters specified.
+ * \return Boolean \c true if the internal oscillator was successfully started, \c false if invalid parameters specified.
*/
- static inline bool AVR32CLK_StartPLL(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StartPLL(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency)
+ static inline uint8_t AVR32CLK_StartInternalOscillator(const uint8_t Source) ATTR_ALWAYS_INLINE;
+ static inline uint8_t AVR32CLK_StartInternalOscillator(const uint8_t Source)
{
- return false; // TODO
+ switch (Source)
+ {
+ case CLOCK_SRC_INT_RC2MHZ:
+ OSC.CTRL |= OSC_RC2MEN_bm;
+ while (!(OSC.STATUS & OSC_RC2MRDY_bm));
+ return true;
+ case CLOCK_SRC_INT_RC32MHZ:
+ OSC.CTRL |= OSC_RC32MEN_bm;
+ while (!(OSC.STATUS & OSC_RC32MRDY_bm));
+ return true;
+ case CLOCK_SRC_INT_RC32KHZ:
+ OSC.CTRL |= OSC_RC32KEN_bm;
+ while (!(OSC.STATUS & OSC_RC32KRDY_bm));
+ return true;
+ }
+
+ return false;
}
- /** Stops the given PLL of the UC3 microcontroller.
+ /** Stops the given internal oscillator of the XMEGA microcontroller.
*
- * \param[in] Channel Index of the PLL to stop.
- */
- static inline void AVR32CLK_StopPLL(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopPLL(const uint8_t Channel)
+ * \param[in] Source Internal oscillator to stop, a value from \ref XMEGA_System_ClockSource_t.
+ *
+ * \return Boolean \c true if the internal oscillator was successfully stopped, \c false if invalid parameters specified.
+ */
+ static inline bool AVR32CLK_StopInternalOscillator(const uint8_t Source) ATTR_ALWAYS_INLINE;
+ static inline bool AVR32CLK_StopInternalOscillator(const uint8_t Source)
{
- // TODO
- }
+ switch (Source)
+ {
+ case CLOCK_SRC_INT_RC2MHZ:
+ OSC.CTRL &= ~OSC_RC2MEN_bm;
+ return true;
+ case CLOCK_SRC_INT_RC32MHZ:
+ OSC.CTRL &= ~OSC_RC32MEN_bm;
+ return true;
+ case CLOCK_SRC_INT_RC32KHZ:
+ OSC.CTRL &= ~OSC_RC32KEN_bm;
+ return true;
+ }
- /** Starts the given Generic Clock of the UC3 microcontroller, with the given options.
+ return false;
+ }
+
+ /** Starts the PLL of the XMEGA microcontroller, with the given options. This routine blocks until the PLL is ready for use.
*
- * \param[in] Channel Index of the Generic Clock to start.
- * \param[in] Source Clock source for the Generic Clock, a value from \ref XMEGA_System_ClockSource_t.
- * \param[in] SourceFreq Frequency of the Generic Clock's clock source, in Hz.
- * \param[in] Frequency Target frequency of the Generic Clock's output.
+ * \note The output frequency must be equal to or greater than the source frequency.
*
- * \return Boolean \c true if the Generic Clock was successfully started, \c false if invalid parameters specified.
+ * \param[in] Source Clock source for the PLL, a value from \ref XMEGA_System_ClockSource_t.
+ * \param[in] SourceFreq Frequency of the PLL's clock source, in Hz.
+ * \param[in] Frequency Target frequency of the PLL's output.
+ *
+ * \return Boolean \c true if the PLL was successfully started, \c false if invalid parameters specified.
*/
- static inline bool AVR32CLK_StartGenericClock(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_StartGenericClock(const uint8_t Channel,
- const uint8_t Source,
- const uint32_t SourceFreq,
- const uint32_t Frequency)
+ static inline bool AVR32CLK_StartPLL(const uint8_t Source,
+ const uint32_t SourceFreq,
+ const uint32_t Frequency) ATTR_ALWAYS_INLINE;
+ static inline bool AVR32CLK_StartPLL(const uint8_t Source,
+ const uint32_t SourceFreq,
+ const uint32_t Frequency)
{
- return false; // TODO
- }
+ uint8_t MulFactor = (Frequency / SourceFreq);
+
+ if (SourceFreq > Frequency)
+ return false;
- /** Stops the given generic clock of the UC3 microcontroller.
- *
- * \param[in] Channel Index of the generic clock to stop.
- */
- static inline void AVR32CLK_StopGenericClock(const uint8_t Channel) ATTR_ALWAYS_INLINE;
- static inline void AVR32CLK_StopGenericClock(const uint8_t Channel)
+ switch (Source)
+ {
+ case CLOCK_SRC_INT_RC2MHZ:
+ OSC.PLLCTRL = (OSC_PLLSRC_RC2M_gc | MulFactor);
+ break;
+ case CLOCK_SRC_INT_RC32MHZ:
+ OSC.PLLCTRL = (OSC_PLLSRC_RC32M_gc | MulFactor);
+ break;
+ case CLOCK_SRC_XOSC:
+ OSC.PLLCTRL = (OSC_PLLSRC_XOSC_gc | MulFactor);
+ break;
+ default:
+ return false;
+ }
+
+ OSC.CTRL |= OSC_PLLEN_bm;
+
+ while (!(OSC.STATUS & OSC_PLLRDY_bm));
+ return true;
+ }
+
+ /** Stops the PLL of the XMEGA microcontroller. */
+ static inline void AVR32CLK_StopPLL(void) ATTR_ALWAYS_INLINE;
+ static inline void AVR32CLK_StopPLL(void)
{
- // TODO
+ OSC.CTRL &= ~OSC_PLLEN_bm;
}
/** Sets the clock source for the main microcontroller core. The given clock source should be configured
* and ready for use before this function is called.
*
- * This function will configure the FLASH controller's wait states automatically to suit the given clock source.
- *
* \param[in] Source Clock source for the CPU core, a value from \ref XMEGA_System_ClockSource_t.
* \param[in] SourceFreq Frequency of the CPU core's clock source, in Hz.
*
* \return Boolean \c true if the CPU core clock was sucessfully altered, \c false if invalid parameters specified.
*/
- static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
+ static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source,
const uint32_t SourceFreq) ATTR_ALWAYS_INLINE;
- static inline bool AVR32CLK_SetCPUClockSource(const uint8_t Source,
+ static inline bool XMEGACLK_SetCPUClockSource(const uint8_t Source,
const uint32_t SourceFreq)
{
- return false // TODO
+ uint8_t ClockSourceMask = 0;
+
+ switch (Source)
+ {
+ case CLOCK_SRC_INT_RC2MHZ:
+ ClockSourceMask = CLK_SCLKSEL_RC2M_gc;
+ break;
+ case CLOCK_SRC_INT_RC32MHZ:
+ ClockSourceMask = CLK_SCLKSEL_RC32M_gc;
+ break;
+ case CLOCK_SRC_INT_RC32KHZ:
+ ClockSourceMask = CLK_SCLKSEL_RC32K_gc;
+ break;
+ case CLOCK_SRC_XOSC:
+ ClockSourceMask = CLK_SCLKSEL_XOSC_gc;
+ break;
+ case CLOCK_SRC_PLL:
+ ClockSourceMask = CLK_SCLKSEL_PLL_gc;
+ break;
+ default:
+ return false;
+ }
+
+ uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
+ GlobalInterruptDisable();
+
+ CCP = CCP_IOREG_gc;
+ CLK.CTRL = ClockSourceMask;
+
+ SetGlobalInterruptMask(CurrentGlobalInt);
+
+ Delay_MS(1);
+ return (CLK.CTRL == ClockSourceMask);
}
/* Disable C linkage for C++ Compilers: */
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-29 07:05:09 +0000