diff options
77 files changed, 310 insertions, 461 deletions
diff --git a/Bootloaders/CDC/Doxygen.conf b/Bootloaders/CDC/Doxygen.conf index ea21cd05e..915c510f6 100644 --- a/Bootloaders/CDC/Doxygen.conf +++ b/Bootloaders/CDC/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Bootloaders/DFU/Doxygen.conf b/Bootloaders/DFU/Doxygen.conf index 9aec702f5..d36ebbdcc 100644 --- a/Bootloaders/DFU/Doxygen.conf +++ b/Bootloaders/DFU/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Bootloaders/HID/Doxygen.conf b/Bootloaders/HID/Doxygen.conf index 5fe5a69b8..0a84010c5 100644 --- a/Bootloaders/HID/Doxygen.conf +++ b/Bootloaders/HID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -805,7 +805,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -957,9 +957,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/BuildTests/SingleUSBModeTest/makefile.test b/BuildTests/SingleUSBModeTest/makefile.test index 800e3c3a6..278780f10 100644 --- a/BuildTests/SingleUSBModeTest/makefile.test +++ b/BuildTests/SingleUSBModeTest/makefile.test @@ -16,11 +16,11 @@ F_CPU = $(F_USB) DEBUG_LEVEL = 0 ifeq ($(ARCH), AVR8) - F_USB = 8000000 + F_USB = 8000000 else ifeq ($(ARCH), XMEGA) - F_USB = 48000000 + F_USB = 48000000 else ifeq ($(ARCH), UC3) - F_USB = 48000000 + F_USB = 48000000 endif OPTIMIZATION = 1 @@ -47,7 +47,7 @@ CC_FLAGS += -Woverlength-strings # Only enable rendundant declaration warnings for AVR8 target (FIXME) ifeq ($(ARCH), AVR8) -CC_FLAGS += -Wredundant-decls + CC_FLAGS += -Wredundant-decls endif # C compiler only flags diff --git a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf index d217aa443..251853080 100644 --- a/Demos/Device/ClassDriver/AudioInput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf index 4cd9e9c5b..ac4ec567d 100644 --- a/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf +++ b/Demos/Device/ClassDriver/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf index 0f78680c3..601aa7f3e 100644 --- a/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf index 7b71c2054..72f700ffc 100644 --- a/Demos/Device/ClassDriver/GenericHID/Doxygen.conf +++ b/Demos/Device/ClassDriver/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/Joystick/Doxygen.conf b/Demos/Device/ClassDriver/Joystick/Doxygen.conf index 407d08a86..4faa0a290 100644 --- a/Demos/Device/ClassDriver/Joystick/Doxygen.conf +++ b/Demos/Device/ClassDriver/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf index 0b47b1a32..7b2277180 100644 --- a/Demos/Device/ClassDriver/Keyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf index a7357cb18..d81fea44e 100644 --- a/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf index c3696bbd9..0985bcfb8 100644 --- a/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf +++ b/Demos/Device/ClassDriver/KeyboardMouseMultiReport/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/MIDI/Doxygen.conf b/Demos/Device/ClassDriver/MIDI/Doxygen.conf index f95325f80..196b98389 100644 --- a/Demos/Device/ClassDriver/MIDI/Doxygen.conf +++ b/Demos/Device/ClassDriver/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf index 4ef067503..0f8ba2e07 100644 --- a/Demos/Device/ClassDriver/MassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf index 4f8b9e59d..966b45852 100644 --- a/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf +++ b/Demos/Device/ClassDriver/MassStorageKeyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/Mouse/Doxygen.conf b/Demos/Device/ClassDriver/Mouse/Doxygen.conf index 1dd2ccd02..bbc8d87fd 100644 --- a/Demos/Device/ClassDriver/Mouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf index da74f6b48..121299762 100644 --- a/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/ClassDriver/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf index ebe72a5d9..56e12f23c 100644 --- a/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf index c38f51df6..68f9f1195 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf index fea97b2d9..8dd99d4be 100644 --- a/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf +++ b/Demos/Device/ClassDriver/VirtualSerialMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/AudioInput/Doxygen.conf b/Demos/Device/LowLevel/AudioInput/Doxygen.conf index d217aa443..251853080 100644 --- a/Demos/Device/LowLevel/AudioInput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioInput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf index 4cd9e9c5b..ac4ec567d 100644 --- a/Demos/Device/LowLevel/AudioOutput/Doxygen.conf +++ b/Demos/Device/LowLevel/AudioOutput/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf index 0f78680c3..601aa7f3e 100644 --- a/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/DualVirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/GenericHID/Doxygen.conf b/Demos/Device/LowLevel/GenericHID/Doxygen.conf index 7b71c2054..72f700ffc 100644 --- a/Demos/Device/LowLevel/GenericHID/Doxygen.conf +++ b/Demos/Device/LowLevel/GenericHID/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/Joystick/Doxygen.conf b/Demos/Device/LowLevel/Joystick/Doxygen.conf index 407d08a86..4faa0a290 100644 --- a/Demos/Device/LowLevel/Joystick/Doxygen.conf +++ b/Demos/Device/LowLevel/Joystick/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/Keyboard/Doxygen.conf b/Demos/Device/LowLevel/Keyboard/Doxygen.conf index 0b47b1a32..7b2277180 100644 --- a/Demos/Device/LowLevel/Keyboard/Doxygen.conf +++ b/Demos/Device/LowLevel/Keyboard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf index a7357cb18..d81fea44e 100644 --- a/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf +++ b/Demos/Device/LowLevel/KeyboardMouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/MIDI/Doxygen.conf b/Demos/Device/LowLevel/MIDI/Doxygen.conf index f95325f80..196b98389 100644 --- a/Demos/Device/LowLevel/MIDI/Doxygen.conf +++ b/Demos/Device/LowLevel/MIDI/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/MassStorage/Doxygen.conf b/Demos/Device/LowLevel/MassStorage/Doxygen.conf index 4ef067503..0f8ba2e07 100644 --- a/Demos/Device/LowLevel/MassStorage/Doxygen.conf +++ b/Demos/Device/LowLevel/MassStorage/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/Mouse/Doxygen.conf b/Demos/Device/LowLevel/Mouse/Doxygen.conf index 1dd2ccd02..bbc8d87fd 100644 --- a/Demos/Device/LowLevel/Mouse/Doxygen.conf +++ b/Demos/Device/LowLevel/Mouse/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf index da74f6b48..121299762 100644 --- a/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf +++ b/Demos/Device/LowLevel/RNDISEthernet/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf index ebe72a5d9..56e12f23c 100644 --- a/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf +++ b/Demos/Device/LowLevel/VirtualSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf index ec511fec4..c7228945d 100644 --- a/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf +++ b/Demos/DualRole/ClassDriver/MouseHostDevice/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf index 36cb2f08e..18ee748c8 100644 --- a/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf index f3ed928f6..6645b195f 100644 --- a/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf index 237d312e6..9bdda1f1f 100644 --- a/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf index 575abd0e3..749263b8b 100644 --- a/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf index e626e69be..118e37f62 100644 --- a/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf index 72a0fb759..3659a85ab 100644 --- a/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf index 1d898aca2..bce67fde8 100644 --- a/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf index 086bf674c..8b7fb2192 100644 --- a/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf index 29459d8bc..a0158a393 100644 --- a/Demos/Host/ClassDriver/MouseHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf index 35b3dd063..4bc2c0590 100644 --- a/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/ClassDriver/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf index af83229fb..a2c5ee1f8 100644 --- a/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf index 8864c18da..7c4fc5ef0 100644 --- a/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf index f9ebf1510..518c26d4e 100644 --- a/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf index d6fe34d79..2f58e77db 100644 --- a/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/ClassDriver/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf index 36cb2f08e..18ee748c8 100644 --- a/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AndroidAccessoryHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf index f3ed928f6..6645b195f 100644 --- a/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioInputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf index 237d312e6..9bdda1f1f 100644 --- a/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf +++ b/Demos/Host/LowLevel/AudioOutputHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf index ae6cafac0..f2953a56f 100644 --- a/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf +++ b/Demos/Host/LowLevel/GenericHIDHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf index 575abd0e3..749263b8b 100644 --- a/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/JoystickHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf index e626e69be..118e37f62 100644 --- a/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf index 72a0fb759..3659a85ab 100644 --- a/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/KeyboardHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf index 1d898aca2..bce67fde8 100644 --- a/Demos/Host/LowLevel/MIDIHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MIDIHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf index 086bf674c..8b7fb2192 100644 --- a/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MassStorageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MouseHost/Doxygen.conf b/Demos/Host/LowLevel/MouseHost/Doxygen.conf index 29459d8bc..a0158a393 100644 --- a/Demos/Host/LowLevel/MouseHost/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf index 35b3dd063..4bc2c0590 100644 --- a/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf +++ b/Demos/Host/LowLevel/MouseHostWithParser/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf index af83229fb..a2c5ee1f8 100644 --- a/Demos/Host/LowLevel/PrinterHost/Doxygen.conf +++ b/Demos/Host/LowLevel/PrinterHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf index dac7bf3c0..1b388b9f9 100644 --- a/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf +++ b/Demos/Host/LowLevel/RNDISEthernetHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf index f9ebf1510..518c26d4e 100644 --- a/Demos/Host/LowLevel/StillImageHost/Doxygen.conf +++ b/Demos/Host/LowLevel/StillImageHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf index d6fe34d79..2f58e77db 100644 --- a/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf +++ b/Demos/Host/LowLevel/VirtualSerialHost/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/LUFA/Doxygen.conf b/LUFA/Doxygen.conf index 5280ae973..c199c9cc7 100644 --- a/LUFA/Doxygen.conf +++ b/LUFA/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -728,7 +728,8 @@ EXCLUDE_SYMBOLS = _* \ # directories that contain example code fragments that are included (see # the \include command). -EXAMPLE_PATH = ./ CodeTemplates/ +EXAMPLE_PATH = ./ \ + CodeTemplates/ # If the value of the EXAMPLE_PATH tag contains directories, you can use the # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp @@ -804,7 +805,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +957,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/AVRISP-MKII/Doxygen.conf b/Projects/AVRISP-MKII/Doxygen.conf index 24e139abe..51656db1a 100644 --- a/Projects/AVRISP-MKII/Doxygen.conf +++ b/Projects/AVRISP-MKII/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/Benito/Doxygen.conf b/Projects/Benito/Doxygen.conf index 64e72a1a7..d89541e57 100644 --- a/Projects/Benito/Doxygen.conf +++ b/Projects/Benito/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/HIDReportViewer/Doxygen.conf b/Projects/HIDReportViewer/Doxygen.conf index 4906ca5ea..e96c47f13 100644 --- a/Projects/HIDReportViewer/Doxygen.conf +++ b/Projects/HIDReportViewer/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/LEDNotifier/Doxygen.conf b/Projects/LEDNotifier/Doxygen.conf index 61467471f..9b77d03c0 100644 --- a/Projects/LEDNotifier/Doxygen.conf +++ b/Projects/LEDNotifier/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -807,7 +807,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -959,9 +959,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/MIDIToneGenerator/Doxygen.conf b/Projects/MIDIToneGenerator/Doxygen.conf index 277c61599..1786fd7b2 100644 --- a/Projects/MIDIToneGenerator/Doxygen.conf +++ b/Projects/MIDIToneGenerator/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/Magstripe/Doxygen.conf b/Projects/Magstripe/Doxygen.conf index aaddc869c..eb5fb2e77 100644 --- a/Projects/Magstripe/Doxygen.conf +++ b/Projects/Magstripe/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/MediaController/Doxygen.conf b/Projects/MediaController/Doxygen.conf index 32c532d93..40ebf9133 100644 --- a/Projects/MediaController/Doxygen.conf +++ b/Projects/MediaController/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/MissileLauncher/Doxygen.conf b/Projects/MissileLauncher/Doxygen.conf index 512649dfe..4454d2934 100644 --- a/Projects/MissileLauncher/Doxygen.conf +++ b/Projects/MissileLauncher/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf index dc116f0cf..66909d09d 100644 --- a/Projects/RelayBoard/Doxygen.conf +++ b/Projects/RelayBoard/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf index b16a3b8a8..a04837b86 100644 --- a/Projects/SerialToLCD/Doxygen.conf +++ b/Projects/SerialToLCD/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/TempDataLogger/Doxygen.conf b/Projects/TempDataLogger/Doxygen.conf index 70f6e0aeb..04859f62b 100644 --- a/Projects/TempDataLogger/Doxygen.conf +++ b/Projects/TempDataLogger/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -805,7 +805,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -957,9 +957,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/USBtoSerial/Doxygen.conf b/Projects/USBtoSerial/Doxygen.conf index ae0ed4822..836a38b9d 100644 --- a/Projects/USBtoSerial/Doxygen.conf +++ b/Projects/USBtoSerial/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/Webserver/Doxygen.conf b/Projects/Webserver/Doxygen.conf index 3d431fd09..522a05511 100644 --- a/Projects/Webserver/Doxygen.conf +++ b/Projects/Webserver/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -805,7 +805,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -957,9 +957,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf index 827d892c6..7478e0eec 100644 --- a/Projects/XPLAINBridge/Doxygen.conf +++ b/Projects/XPLAINBridge/Doxygen.conf @@ -1,4 +1,4 @@ -# Doxyfile 1.8.1 +# Doxyfile 1.8.1.2 # This file describes the settings to be used by the documentation system # doxygen (www.doxygen.org) for a project. @@ -588,7 +588,7 @@ FILE_VERSION_FILTER = # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed # by doxygen. The layout file controls the global structure of the generated -# output files in an output format independent way. The create the layout file +# output files in an output format independent way. To create the layout file # that represents doxygen's defaults, run doxygen with the -l option. # You can optionally specify a file name after the option, if omitted # DoxygenLayout.xml will be used as the name of the layout file. @@ -804,7 +804,7 @@ INLINE_SOURCES = NO # Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct # doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. +# fragments. Normal C, C++ and Fortran comments will always remain visible. STRIP_CODE_COMMENTS = YES @@ -956,9 +956,7 @@ HTML_TIMESTAMP = NO # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML # documentation will contain sections that can be hidden and shown after the -# page has loaded. For this to work a browser that supports -# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox -# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). +# page has loaded. HTML_DYNAMIC_SECTIONS = YES |