diff options
| -rw-r--r-- | Bootloaders/CDC/BootloaderCDC.txt | 6 | ||||
| -rw-r--r-- | Bootloaders/CDC/makefile | 2 | ||||
| -rw-r--r-- | Bootloaders/DFU/BootloaderDFU.txt | 6 | ||||
| -rw-r--r-- | Bootloaders/DFU/makefile | 2 | ||||
| -rw-r--r-- | Bootloaders/HID/BootloaderHID.txt | 8 | ||||
| -rw-r--r-- | Bootloaders/HID/makefile | 2 |
6 files changed, 13 insertions, 13 deletions
diff --git a/Bootloaders/CDC/BootloaderCDC.txt b/Bootloaders/CDC/BootloaderCDC.txt index 276a0c9c4..618b95d25 100644 --- a/Bootloaders/CDC/BootloaderCDC.txt +++ b/Bootloaders/CDC/BootloaderCDC.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a CDC Class device (virtual serial port), allowing for AVR109 * protocol compatible programming software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space. - * If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB - * and BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/CDC/makefile b/Bootloaders/CDC/makefile index 066fb8884..a92172d54 100644 --- a/Bootloaders/CDC/makefile +++ b/Bootloaders/CDC/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section, and the User Application diff --git a/Bootloaders/DFU/BootloaderDFU.txt b/Bootloaders/DFU/BootloaderDFU.txt index e10beea36..2c9eaf1de 100644 --- a/Bootloaders/DFU/BootloaderDFU.txt +++ b/Bootloaders/DFU/BootloaderDFU.txt @@ -47,9 +47,9 @@ * This bootloader enumerates to the host as a DFU Class device, allowing for DFU-compatible programming * software to load firmware onto the AVR. * - * Out of the box this bootloader builds for the AT90USBUSB1287, and will fit into 4KB of bootloader space. - * If you wish to enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB - * and BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 4KB of bootloader space. If you wish to alter this size and/or change the AVR model, you will need to + * edit the MCU, FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * When the bootloader is running, the board's LED(s) will flash at regular intervals to distinguish the * bootloader from the normal user application. diff --git a/Bootloaders/DFU/makefile b/Bootloaders/DFU/makefile index 608564ebe..f78ceb270 100644 --- a/Bootloaders/DFU/makefile +++ b/Bootloaders/DFU/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section, and the User Application diff --git a/Bootloaders/HID/BootloaderHID.txt b/Bootloaders/HID/BootloaderHID.txt index d32efeeb7..f6c084d65 100644 --- a/Bootloaders/HID/BootloaderHID.txt +++ b/Bootloaders/HID/BootloaderHID.txt @@ -51,10 +51,10 @@ * from PJRC (used with permission). This bootloader is deliberatley non-compatible with the properietary PJRC * HalfKay bootloader GUI; only the command line interface software accompanying this bootloader will work with it. * - * Out of the box this bootloader builds for the AT90USB1287, and will fit into 2KB of bootloader space for the - * Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for all other models. If you wish to - * enlarge this space and/or change the AVR model, you will need to edit the MCU, FLASH_SIZE_KB and - * BOOT_SECTION_SIZE_KB values in the accompanying makefile. + * Out of the box this bootloader builds for the AT90USB1287 with an 8KB bootloader section size, and will fit + * into 2KB of bootloader space for the Series 2 USB AVRs (ATMEGAxxU2, AT90USBxx2) or 4KB of bootloader space for + * all other models. If you wish to alter this size and/or change the AVR model, you will need to edit the MCU, + * FLASH_SIZE_KB and BOOT_SECTION_SIZE_KB values in the accompanying makefile. * * \section Sec_Installation Driver Installation * diff --git a/Bootloaders/HID/makefile b/Bootloaders/HID/makefile index efbb6a645..bfefbf695 100644 --- a/Bootloaders/HID/makefile +++ b/Bootloaders/HID/makefile @@ -95,7 +95,7 @@ F_USB = $(F_CPU) # Note that the bootloader size and start address given in AVRStudio is in words and not # bytes, and so will need to be doubled to obtain the byte address needed by AVR-GCC. FLASH_SIZE_KB = 128 -BOOT_SECTION_SIZE_KB = 4 +BOOT_SECTION_SIZE_KB = 8 # Formulas used to calculate the starting address of the Bootloader section. These formulas |