Upgrade Doxygen configuration files for Doxygen 1.8.1, fix broken stylesheet and footer HTML, add explicit spacing into documentation code fragments to prevent Doxygen from removing empty lines in the output.

14 files changed, 210 insertions, 294 deletions

diff --git a/Projects/AVRISP-MKII/Doxygen.conf b/Projects/AVRISP-MKII/Doxygen.conf
index 12a6b9c78..24e139abe 100644
--- a/Projects/AVRISP-MKII/Doxygen.conf
+++ b/Projects/AVRISP-MKII/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "AVRISP-MKII Clone Programmer Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/Benito/Doxygen.conf b/Projects/Benito/Doxygen.conf
index 44ff2a40c..64e72a1a7 100644
--- a/Projects/Benito/Doxygen.conf
+++ b/Projects/Benito/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "Benito Arduino Programmer Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/HIDReportViewer/Doxygen.conf b/Projects/HIDReportViewer/Doxygen.conf
index b792c67bd..4906ca5ea 100644
--- a/Projects/HIDReportViewer/Doxygen.conf
+++ b/Projects/HIDReportViewer/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "HID Device Report Viewer Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/LEDNotifier/Doxygen.conf b/Projects/LEDNotifier/Doxygen.conf
index 562fcd8a8..61467471f 100644
--- a/Projects/LEDNotifier/Doxygen.conf
+++ b/Projects/LEDNotifier/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - USB LED Notifier Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -963,12 +957,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -977,6 +965,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1134,7 +1133,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1155,11 +1154,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1728,7 +1722,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/MIDIToneGenerator/Doxygen.conf b/Projects/MIDIToneGenerator/Doxygen.conf
index 50223a882..277c61599 100644
--- a/Projects/MIDIToneGenerator/Doxygen.conf
+++ b/Projects/MIDIToneGenerator/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - MIDI Tone Generator Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/Magstripe/Doxygen.conf b/Projects/Magstripe/Doxygen.conf
index 5bde2d854..aaddc869c 100644
--- a/Projects/Magstripe/Doxygen.conf
+++ b/Projects/Magstripe/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "Denver Gingerich's Stripe Snoop Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/MediaController/Doxygen.conf b/Projects/MediaController/Doxygen.conf
index 4ef61870d..32c532d93 100644
--- a/Projects/MediaController/Doxygen.conf
+++ b/Projects/MediaController/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - Media Controller Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/MissileLauncher/Doxygen.conf b/Projects/MissileLauncher/Doxygen.conf
index 480832870..512649dfe 100644
--- a/Projects/MissileLauncher/Doxygen.conf
+++ b/Projects/MissileLauncher/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "Dave Fletcher's Missile Launcher Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/RelayBoard/Doxygen.conf b/Projects/RelayBoard/Doxygen.conf
index 03778cb8f..dc116f0cf 100644
--- a/Projects/RelayBoard/Doxygen.conf
+++ b/Projects/RelayBoard/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "OB's Dual-Relay Outlet Control Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/SerialToLCD/Doxygen.conf b/Projects/SerialToLCD/Doxygen.conf
index eaa8e1688..b16a3b8a8 100644
--- a/Projects/SerialToLCD/Doxygen.conf
+++ b/Projects/SerialToLCD/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "Simon Foster's USB Serial to HD44780 LCD Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/TempDataLogger/Doxygen.conf b/Projects/TempDataLogger/Doxygen.conf
index 7a3832194..70f6e0aeb 100644
--- a/Projects/TempDataLogger/Doxygen.conf
+++ b/Projects/TempDataLogger/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "Temperature Datalogger Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -961,12 +955,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -975,6 +963,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1132,7 +1131,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1153,11 +1152,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1726,7 +1720,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/USBtoSerial/Doxygen.conf b/Projects/USBtoSerial/Doxygen.conf
index 57f8a9a67..ae0ed4822 100644
--- a/Projects/USBtoSerial/Doxygen.conf
+++ b/Projects/USBtoSerial/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - USB to Serial Device Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/Webserver/Doxygen.conf b/Projects/Webserver/Doxygen.conf
index 691ce6a79..3d431fd09 100644
--- a/Projects/Webserver/Doxygen.conf
+++ b/Projects/Webserver/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - uIP Powered Webserver Project"
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -961,12 +955,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -975,6 +963,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1132,7 +1131,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1153,11 +1152,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1726,7 +1720,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.
diff --git a/Projects/XPLAINBridge/Doxygen.conf b/Projects/XPLAINBridge/Doxygen.conf
index 2e5c3a3c2..827d892c6 100644
--- a/Projects/XPLAINBridge/Doxygen.conf
+++ b/Projects/XPLAINBridge/Doxygen.conf
@@ -1,4 +1,4 @@
-# Doxyfile 1.8.0
+# Doxyfile 1.8.1
 
 # This file describes the settings to be used by the documentation system
 # doxygen (www.doxygen.org) for a project.
@@ -32,7 +32,7 @@ PROJECT_NAME           = "LUFA Library - XPLAIN Serial Bridge/PDI Programmer Pro
 # This could be handy for archiving the generated documentation or
 # if some version control system is used.
 
-PROJECT_NUMBER         = 
+PROJECT_NUMBER         =
 
 # Using the PROJECT_BRIEF tag one can provide an optional one line description
 # for a project that appears at the top of each page and should give viewer
@@ -563,12 +563,6 @@ MAX_INITIALIZER_LINES  = 30
 
 SHOW_USED_FILES        = YES
 
-# If the sources in your project are distributed over multiple directories
-# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy
-# in the documentation. The default is NO.
-
-SHOW_DIRECTORIES       = YES
-
 # Set the SHOW_FILES tag to NO to disable the generation of the Files page.
 # This will remove the Files entry from the Quick Index and from the
 # Folder Tree View (if specified). The default is YES.
@@ -960,12 +954,6 @@ HTML_COLORSTYLE_GAMMA  = 80
 
 HTML_TIMESTAMP         = NO
 
-# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
-# files or namespaces will be aligned in HTML using tables. If set to
-# NO a bullet list will be used.
-
-HTML_ALIGN_MEMBERS     = YES
-
 # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
 # documentation will contain sections that can be hidden and shown after the
 # page has loaded. For this to work a browser that supports
@@ -974,6 +962,17 @@ HTML_ALIGN_MEMBERS     = YES
 
 HTML_DYNAMIC_SECTIONS  = YES
 
+# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of
+# entries shown in the various tree structured indices initially; the user
+# can expand and collapse entries dynamically later on. Doxygen will expand
+# the tree to such a level that at most the specified number of entries are
+# visible (unless a fully collapsed tree already exceeds this amount).
+# So setting the number of entries 1 will produce a full collapsed tree by
+# default. 0 is a special value representing an infinite number of entries
+# and will result in a full expanded tree by default.
+
+HTML_INDEX_NUM_ENTRIES = 100
+
 # If the GENERATE_DOCSET tag is set to YES, additional index files
 # will be generated that can be used as input for Apple's Xcode 3
 # integrated development environment, introduced with OSX 10.5 (Leopard).
@@ -1131,7 +1130,7 @@ ECLIPSE_DOC_ID         = org.doxygen.Project
 # navigation tree you can set this option to NO if you already set
 # GENERATE_TREEVIEW to YES.
 
-DISABLE_INDEX       = YES
+DISABLE_INDEX          = YES
 
 # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
 # structure should be generated to display hierarchical information.
@@ -1152,11 +1151,6 @@ GENERATE_TREEVIEW      = YES
 
 ENUM_VALUES_PER_LINE   = 1
 
-# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories,
-# and Class Hierarchy pages using a tree view instead of an ordered list.
-
-USE_INLINE_TREES       = NO
-
 # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be
 # used to set the initial width (in pixels) of the frame in which the tree
 # is shown.
@@ -1725,7 +1719,7 @@ CALLER_GRAPH           = NO
 
 GRAPHICAL_HIERARCHY    = NO
 
-# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES
+# If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES
 # then doxygen will show the dependencies a directory has on other directories
 # in a graphical way. The dependency relations are determined by the #include
 # relations between the files in the directories.