Spell check all source code variables, comments and strings.

8 files changed, 160 insertions, 160 deletions

diff --git a/Projects/AVRISP/AVRISP.c b/Projects/AVRISP/AVRISP.c
index 4eb02d2bf..203fced45 100644
--- a/Projects/AVRISP/AVRISP.c
+++ b/Projects/AVRISP/AVRISP.c
@@ -48,7 +48,7 @@ int main(void)
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);

 

 	for (;;)

-	{
+	{

 		Process_AVRISP_Commands();

 		

 		V2Params_UpdateParamValues();

@@ -111,20 +111,20 @@ void EVENT_USB_Device_ConfigurationChanged(void)
 	}

 }

 

-/** Processes incomming V2 Protocol commands from the host, returning a response when required. */
-void Process_AVRISP_Commands(void)
-{
+/** Processes incoming V2 Protocol commands from the host, returning a response when required. */

+void Process_AVRISP_Commands(void)

+{

 	/* Device must be connected and configured for the task to run */

 	if (USB_DeviceState != DEVICE_STATE_Configured)

-	  return;
-
+	  return;

+

 	Endpoint_SelectEndpoint(AVRISP_DATA_EPNUM);

-	
-	/* Check to see if a V2 Protocol command has been received */
+	

+	/* Check to see if a V2 Protocol command has been received */

 	if (Endpoint_IsOUTReceived())

-	{
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
+	{

+		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */

 		V2Protocol_ProcessCommand();

 	}

-}
-
+}

+

diff --git a/Projects/AVRISP/Lib/V2Protocol.c b/Projects/AVRISP/Lib/V2Protocol.c
index d7343aad6..d03bd8924 100644
--- a/Projects/AVRISP/Lib/V2Protocol.c
+++ b/Projects/AVRISP/Lib/V2Protocol.c
@@ -36,12 +36,12 @@
 #define  INCLUDE_FROM_V2PROTOCOL_C

 #include "V2Protocol.h"

 

-/** Master V2 Protocol packet handler, for receieved V2 Protocol packets from a connected host.

+/** Master V2 Protocol packet handler, for received V2 Protocol packets from a connected host.

  *  This routine decodes the issued command and passes off the handling of the command to the

  *  appropriate function.

  */

-void V2Protocol_ProcessCommand(void)
-{
+void V2Protocol_ProcessCommand(void)

+{

 	uint8_t V2Command = Endpoint_Read_Byte();

 		  

 	switch (V2Command)

@@ -95,8 +95,8 @@ void V2Protocol_ProcessCommand(void)
 	}

 	

 	Endpoint_WaitUntilReady();

-	Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);
-}
+	Endpoint_SetEndpointDirection(ENDPOINT_DIR_OUT);

+}

 

 /** Handler for unknown V2 protocol commands. This discards all sent data and returns a

  *  STATUS_CMD_UNKNOWN status back to the host.

@@ -105,7 +105,7 @@ void V2Protocol_ProcessCommand(void)
  */

 static void V2Protocol_Command_Unknown(uint8_t V2Command)

 {

-	/* Discard all incomming data */

+	/* Discard all incoming data */

 	while (Endpoint_BytesInEndpoint() == AVRISP_DATA_EPSIZE)

 	{

 		Endpoint_ClearOUT();

@@ -120,7 +120,7 @@ static void V2Protocol_Command_Unknown(uint8_t V2Command)
 	Endpoint_ClearIN();

 }

 

-/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */
+/** Handler for the CMD_SIGN_ON command, returning the programmer ID string to the host. */

 static void V2Protocol_Command_SignOn(void)

 {

 	Endpoint_ClearOUT();

@@ -151,7 +151,7 @@ static void V2Protocol_Command_GetSetParam(uint8_t V2Command)
 	

 	Endpoint_Write_Byte(V2Command);

 	

-	uint8_t ParamPrivs = V2Params_GetParameterPrivellages(ParamID);

+	uint8_t ParamPrivs = V2Params_GetParameterPrivileges(ParamID);

 	

 	if ((V2Command == CMD_SET_PARAMETER) && (ParamPrivs & PARAM_PRIV_WRITE))

 	{

diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.c b/Projects/AVRISP/Lib/V2ProtocolParams.c
index 6b4568a94..62149b4c3 100644
--- a/Projects/AVRISP/Lib/V2ProtocolParams.c
+++ b/Projects/AVRISP/Lib/V2ProtocolParams.c
@@ -44,43 +44,43 @@ static ParameterItem_t ParameterTable[] =
 	{

 		{ .ParamID          = PARAM_BUILD_NUMBER_LOW,

 		  .ParamValue       = (LUFA_VERSION_INTEGER >> 8),

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_BUILD_NUMBER_HIGH,

 		  .ParamValue       = (LUFA_VERSION_INTEGER & 0xFF),

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_HW_VER,

 		  .ParamValue       = 0x00,

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_SW_MAJOR,

 		  .ParamValue       = 0x01,

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_SW_MINOR,

 		  .ParamValue       = 0x0C,

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_VTARGET,

 		  .ParamValue       = 0x32,

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_SCK_DURATION,

 		  .ParamValue       = (TOTAL_PROGRAMMING_SPEEDS - 1),

-		  .ParamPrivellages = PARAM_PRIV_READ | PARAM_PRIV_WRITE },

+		  .ParamPrivileges = PARAM_PRIV_READ | PARAM_PRIV_WRITE },

 

 		{ .ParamID          = PARAM_RESET_POLARITY,

 		  .ParamValue       = 0x00,

-		  .ParamPrivellages = PARAM_PRIV_WRITE                   },

+		  .ParamPrivileges = PARAM_PRIV_WRITE                   },

 

 		{ .ParamID          = PARAM_STATUS_TGT_CONN,

 		  .ParamValue       = 0x00,

-		  .ParamPrivellages = PARAM_PRIV_READ                    },

+		  .ParamPrivileges = PARAM_PRIV_READ                    },

 

 		{ .ParamID          = PARAM_DISCHARGEDELAY,

 		  .ParamValue       = 0x00,

-		  .ParamPrivellages = PARAM_PRIV_WRITE                   },

+		  .ParamPrivileges = PARAM_PRIV_WRITE                   },

 	};

 

 

@@ -104,22 +104,22 @@ void V2Params_UpdateParamValues(void)
 	#endif

 }

 

-/** Retrieves the host PC read/write privellages for a given parameter in the parameter table. This should

+/** Retrieves the host PC read/write privileges for a given parameter in the parameter table. This should

  *  be called before calls to \ref V2Params_GetParameterValue() or \ref V2Params_SetParameterValue() when

  *  getting or setting parameter values in response to requests from the host.

  *

- *  \param[in] ParamID  Parameter ID whose privellages are to be retrieved from the table

+ *  \param[in] ParamID  Parameter ID whose privileges are to be retrieved from the table

  *

- *  \return Privellages for the requested parameter, as a mask of PARAM_PRIV_* masks

+ *  \return Privileges for the requested parameter, as a mask of PARAM_PRIV_* masks

  */ 

-uint8_t V2Params_GetParameterPrivellages(uint8_t ParamID)

+uint8_t V2Params_GetParameterPrivileges(uint8_t ParamID)

 {

 	ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);

 	

 	if (ParamInfo == NULL)

 	  return 0;

 

-	return ParamInfo->ParamPrivellages;

+	return ParamInfo->ParamPrivileges;

 }

 

 /** Retrieves the current value for a given parameter in the parameter table.

@@ -132,7 +132,7 @@ uint8_t V2Params_GetParameterValue(uint8_t ParamID)
 {

 	ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);

 	

-	if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivellages & PARAM_PRIV_READ))

+	if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivileges & PARAM_PRIV_READ))

 	  return 0;

 	

 	return ParamInfo->ParamValue;

@@ -149,7 +149,7 @@ void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value)
 {

 	ParameterItem_t* ParamInfo = V2Params_GetParamFromTable(ParamID);

 

-	if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivellages & PARAM_PRIV_WRITE))

+	if ((ParamInfo == NULL) || !(ParamInfo->ParamPrivileges & PARAM_PRIV_WRITE))

 	  return;

 

 	ParamInfo->ParamValue = Value;

@@ -159,7 +159,7 @@ void V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value)
 	  eeprom_write_byte(&EEPROM_Rest_Polarity, Value);  

 }

 

-/** Retrieves a parameter entry (including ID, value and privellages) from the parameter table that matches the given

+/** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given

  *  parameter ID.

  *

  *  \param[in] ParamID  Parameter ID to find in the table

diff --git a/Projects/AVRISP/Lib/V2ProtocolParams.h b/Projects/AVRISP/Lib/V2ProtocolParams.h
index 9ad84e7a3..b27a4ea94 100644
--- a/Projects/AVRISP/Lib/V2ProtocolParams.h
+++ b/Projects/AVRISP/Lib/V2ProtocolParams.h
@@ -33,14 +33,14 @@
  *  Header file for V2ProtocolParams.c.

  */

 

-#ifndef _V2_PROTOCOL_PARAMS_
-#define _V2_PROTOCOL_PARAMS_
-
-	/* Includes: */
+#ifndef _V2_PROTOCOL_PARAMS_

+#define _V2_PROTOCOL_PARAMS_

+

+	/* Includes: */

 		#include <avr/io.h>

-		#include <avr/eeprom.h>
+		#include <avr/eeprom.h>

 

-		#include <LUFA/Version.h>
+		#include <LUFA/Version.h>

 

 		#if defined(ADC)

 			#include <LUFA/Drivers/Peripheral/ADC.h>

@@ -50,32 +50,32 @@
 		#include "V2ProtocolConstants.h"

 

 	/* Macros: */

-		/** Parameter privellage mask to allow the host PC to read the parameter's value */

+		/** Parameter privilege mask to allow the host PC to read the parameter's value */

 		#define PARAM_PRIV_READ   (1 << 0)

 

-		/** Parameter privellage mask to allow the host PC to change the parameter's value */

+		/** Parameter privilege mask to allow the host PC to change the parameter's value */

 		#define PARAM_PRIV_WRITE  (1 << 1)

-
+

 	/* Type Defines: */

 		/** Type define for a parameter table entry indicating a PC readable or writable device parameter. */

 		typedef struct

 		{

 			const uint8_t ParamID; /**< Parameter ID number to uniquely identify the parameter within the device */

 			uint8_t ParamValue; /**< Current parameter's value within the device */

-			uint8_t ParamPrivellages;  /**< Parameter privellages to allow the host to read or write the parameter's value */

-		} ParameterItem_t;
-
+			uint8_t ParamPrivileges;  /**< Parameter privileges to allow the host to read or write the parameter's value */

+		} ParameterItem_t;

+

 	/* Function Prototypes: */

 		void    V2Params_LoadNonVolatileParamValues(void);

 		void    V2Params_UpdateParamValues(void);

 	

-		uint8_t V2Params_GetParameterPrivellages(uint8_t ParamID);

+		uint8_t V2Params_GetParameterPrivileges(uint8_t ParamID);

 		uint8_t V2Params_GetParameterValue(uint8_t ParamID);

 		void    V2Params_SetParameterValue(uint8_t ParamID, uint8_t Value);

 		

 		#if defined(INCLUDE_FROM_V2PROTOCOL_PARAMS_C)

 			static ParameterItem_t* V2Params_GetParamFromTable(uint8_t ParamID);

 		#endif

-
-#endif
-
+

+#endif

+

diff --git a/Projects/AVRISP/Lib/V2ProtocolTarget.c b/Projects/AVRISP/Lib/V2ProtocolTarget.c
index 169e49ac7..80e8be1e8 100644
--- a/Projects/AVRISP/Lib/V2ProtocolTarget.c
+++ b/Projects/AVRISP/Lib/V2ProtocolTarget.c
@@ -45,7 +45,7 @@ uint32_t CurrentAddress;
  */

 uint8_t V2Protocol_GetSPIPrescalerMask(void)

 {

-	static const uint8_t SPIMaskFromSCKDuration[TOTAL_PROGRAMMING_SPEEDS] =

+	static const uint8_t SPIMaskFromSCKDuration[] =

 	{

 	#if (F_CPU == 8000000)

 		SPI_SPEED_FCPU_DIV_2,    // AVRStudio =   8MHz SPI, Actual =   4MHz SPI

@@ -77,7 +77,7 @@ uint8_t V2Protocol_GetSPIPrescalerMask(void)
 }

 

 /** Asserts or deasserts the target's reset line, using the correct polarity as set by the host using a SET PARAM command.

- *  When not asserted, the line is tristated so as not to intefere with normal device operation.

+ *  When not asserted, the line is tristated so as not to interfere with normal device operation.

  *

  *  \param[in] ResetTarget Boolean true when the target should be held in reset, false otherwise

  */

diff --git a/Projects/Benito/Lib/RingBuff.c b/Projects/Benito/Lib/RingBuff.c
index 1f477f17a..0dd4a06bb 100644
--- a/Projects/Benito/Lib/RingBuff.c
+++ b/Projects/Benito/Lib/RingBuff.c
@@ -83,7 +83,7 @@ RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer)
 		if (!(Buffer->Elements))

 		  return 0;

 #elif !defined(BUFF_NOEMPTYCHECK)

-	#error No empty buffer check behaviour specified.

+	#error No empty buffer check behavior specified.

 #endif

 

 		BuffData = *(Buffer->OutPtr);

@@ -109,7 +109,7 @@ RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer)
 		if (!(Buffer->Elements))

 		  return 0;

 #elif !defined(BUFF_NOEMPTYCHECK)

-	#error No empty buffer check behaviour specified.

+	#error No empty buffer check behavior specified.

 #endif

 

 		BuffData = *(Buffer->OutPtr);

diff --git a/Projects/Magstripe/Lib/MagstripeHW.h b/Projects/Magstripe/Lib/MagstripeHW.h
index c4681188a..7561e18e3 100644
--- a/Projects/Magstripe/Lib/MagstripeHW.h
+++ b/Projects/Magstripe/Lib/MagstripeHW.h
@@ -1,100 +1,100 @@
-/*
-  Copyright 2009  Denver Gingerich (denver [at] ossguy [dot] com)
-  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, and distribute this software
-  and its documentation for any purpose and without fee is hereby
-  granted, provided that the above copyright notice appear in all
-  copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting
-  documentation, and that the name of the author not be used in
-  advertising or publicity pertaining to distribution of the
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/*
-	NOTE: The user of this include file MUST define the following macros
-	prior to including the file:
-
-	MAG_T1_CLOCK_PIN   Pin connected to Track 1 clock wire (ie. PORTC1)
-	MAG_T1_DATA_PIN    Pin connected to Track 1 data wire (ie. PORTC2)
-	MAG_T2_CLOCK_PIN   Pin connected to Track 2 clock wire (ie. PORTC3)
-	MAG_T2_DATA_PIN    Pin connected to Track 2 data wire (ie. PORTC0)
-	MAG_T3_CLOCK_PIN   Pin connected to Track 3 clock wire (ie. PORTC5)
-	MAG_T3_DATA_PIN    Pin connected to Track 3 data wire (ie. PORTC6)
-	MAG_CLS_PIN        Pin connected to card loaded wire (ie. PORTC4)
-	MAG_PIN            PIN macro for the reader's port (ie. PINC)
-	MAG_DDR            DDR macro for the reader's port (ie. DDRC)
-	MAG_PORT           PORT macro for the reader's port (ie. PORTC)
-
-	The example macros listed above assume that the Track 2 data wire is
-	connected to pin 0 on port C, the Track 2 clock wire is connected to
-	pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded
-	wire is connected to pin 4 on port C.
-
-	If the magstripe reader you are using only reads one or two tracks,
-	then set the clock and data pins for the tracks it doesn't read to a
-	pin that is unused.  For example, on the AT90USBKey, any of the pins on
-	port C that do not have wires attached will be unused since they are
-	not connected to any onboard devices (such as the joystick or
-	temperature sensor).
-
-	Connecting wires to pins on different ports (ie. a data wire to pin 0
-	on port C and a clock wire to pin 0 on port D) is currently
-	unsupported.  All pins specified above must be on the same port.
-*/
-
-/** \file
- *
- *  Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K).
- */
-
-#ifndef _MAGSTRIPEHW_H_
-#define _MAGSTRIPEHW_H_
-
-	/* Includes: */
-		#include <avr/io.h>
-
-		#include <LUFA/Common/Common.h>
-
-	/* Private Interface - For use in library only: */
-		/* Macros: */
-			/** Mask of the track data, clock and card detection pins. */
-			#define MAG_MASK    (MAG_T1_DATA | MAG_T1_CLOCK | \
-			                     MAG_T2_DATA | MAG_T2_CLOCK | \
-			                     MAG_T3_DATA | MAG_T3_CLOCK | \
-			                     MAG_CARDPRESENT)
-
-	/* Public Interface - May be used in end-application: */
-		/* Inline Functions: */
-			/** Initializes the magnetic stripe card reader ports and pins so that the card reader
-			 *  device can be controlled and read by the card reader driver. This must be called before
-			 *  trying to read any of the card reader's status lines.
-			 */
-			static inline void Magstripe_Init(void)
-			{
-				MAG_DDR  &= ~MAG_MASK;
-				MAG_PORT |=  MAG_MASK;
-			};
-
-			/** Returns the status of all the magnetic card reader's outputs.
-			 *
-			 *  \return A mask indicating which card lines are high or low
-			 */
-			static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
-			static inline uint8_t Magstripe_GetStatus(void)
-			{
-				/* Magstripe IOs are active low and must be inverted when read */
-				return ((uint8_t)~MAG_PIN & MAG_MASK);
-			}
-
-#endif
+/*

+  Copyright 2009  Denver Gingerich (denver [at] ossguy [dot] com)

+  Copyright 2009  Dean Camera (dean [at] fourwalledcubicle [dot] com)

+

+  Permission to use, copy, modify, and distribute this software

+  and its documentation for any purpose and without fee is hereby

+  granted, provided that the above copyright notice appear in all

+  copies and that both that the copyright notice and this

+  permission notice and warranty disclaimer appear in supporting

+  documentation, and that the name of the author not be used in

+  advertising or publicity pertaining to distribution of the

+  software without specific, written prior permission.

+

+  The author disclaim all warranties with regard to this

+  software, including all implied warranties of merchantability

+  and fitness.  In no event shall the author be liable for any

+  special, indirect or consequential damages or any damages

+  whatsoever resulting from loss of use, data or profits, whether

+  in an action of contract, negligence or other tortious action,

+  arising out of or in connection with the use or performance of

+  this software.

+*/

+

+/*

+	NOTE: The user of this include file MUST define the following macros

+	prior to including the file:

+

+	MAG_T1_CLOCK_PIN   Pin connected to Track 1 clock wire (i.e.. PORTC1)

+	MAG_T1_DATA_PIN    Pin connected to Track 1 data wire (i.e.. PORTC2)

+	MAG_T2_CLOCK_PIN   Pin connected to Track 2 clock wire (i.e.. PORTC3)

+	MAG_T2_DATA_PIN    Pin connected to Track 2 data wire (i.e.. PORTC0)

+	MAG_T3_CLOCK_PIN   Pin connected to Track 3 clock wire (i.e.. PORTC5)

+	MAG_T3_DATA_PIN    Pin connected to Track 3 data wire (i.e.. PORTC6)

+	MAG_CLS_PIN        Pin connected to card loaded wire (i.e.. PORTC4)

+	MAG_PIN            PIN macro for the reader's port (i.e.. PINC)

+	MAG_DDR            DDR macro for the reader's port (i.e.. DDRC)

+	MAG_PORT           PORT macro for the reader's port (i.e.. PORTC)

+

+	The example macros listed above assume that the Track 2 data wire is

+	connected to pin 0 on port C, the Track 2 clock wire is connected to

+	pin 3 on port C (similarly for Tracks 1 and 3), and the card loaded

+	wire is connected to pin 4 on port C.

+

+	If the mag-stripe reader you are using only reads one or two tracks,

+	then set the clock and data pins for the tracks it doesn't read to a

+	pin that is unused.  For example, on the AT90USBKey, any of the pins on

+	port C that do not have wires attached will be unused since they are

+	not connected to any onboard devices (such as the joystick or

+	temperature sensor).

+

+	Connecting wires to pins on different ports (i.e.. a data wire to pin 0

+	on port C and a clock wire to pin 0 on port D) is currently

+	unsupported.  All pins specified above must be on the same port.

+*/

+

+/** \file

+ *

+ *  Driver header for a TTL Magnetic Card reader device (such as the Omron V3B-4K).

+ */

+

+#ifndef _MAGSTRIPEHW_H_

+#define _MAGSTRIPEHW_H_

+

+	/* Includes: */

+		#include <avr/io.h>

+

+		#include <LUFA/Common/Common.h>

+

+	/* Private Interface - For use in library only: */

+		/* Macros: */

+			/** Mask of the track data, clock and card detection pins. */

+			#define MAG_MASK    (MAG_T1_DATA | MAG_T1_CLOCK | \

+			                     MAG_T2_DATA | MAG_T2_CLOCK | \

+			                     MAG_T3_DATA | MAG_T3_CLOCK | \

+			                     MAG_CARDPRESENT)

+

+	/* Public Interface - May be used in end-application: */

+		/* Inline Functions: */

+			/** Initializes the magnetic stripe card reader ports and pins so that the card reader

+			 *  device can be controlled and read by the card reader driver. This must be called before

+			 *  trying to read any of the card reader's status lines.

+			 */

+			static inline void Magstripe_Init(void)

+			{

+				MAG_DDR  &= ~MAG_MASK;

+				MAG_PORT |=  MAG_MASK;

+			};

+

+			/** Returns the status of all the magnetic card reader's outputs.

+			 *

+			 *  \return A mask indicating which card lines are high or low

+			 */

+			static inline uint8_t Magstripe_GetStatus(void) ATTR_WARN_UNUSED_RESULT;

+			static inline uint8_t Magstripe_GetStatus(void)

+			{

+				/* Mag-stripe IOs are active low and must be inverted when read */

+				return ((uint8_t)~MAG_PIN & MAG_MASK);

+			}

+

+#endif

diff --git a/Projects/USBtoSerial/Lib/RingBuff.c b/Projects/USBtoSerial/Lib/RingBuff.c
index 1f477f17a..0dd4a06bb 100644
--- a/Projects/USBtoSerial/Lib/RingBuff.c
+++ b/Projects/USBtoSerial/Lib/RingBuff.c
@@ -83,7 +83,7 @@ RingBuff_Data_t Buffer_GetElement(RingBuff_t* Buffer)
 		if (!(Buffer->Elements))

 		  return 0;

 #elif !defined(BUFF_NOEMPTYCHECK)

-	#error No empty buffer check behaviour specified.

+	#error No empty buffer check behavior specified.

 #endif

 

 		BuffData = *(Buffer->OutPtr);

@@ -109,7 +109,7 @@ RingBuff_Data_t Buffer_PeekElement(const RingBuff_t* Buffer)
 		if (!(Buffer->Elements))

 		  return 0;

 #elif !defined(BUFF_NOEMPTYCHECK)

-	#error No empty buffer check behaviour specified.

+	#error No empty buffer check behavior specified.

 #endif

 

 		BuffData = *(Buffer->OutPtr);