New BOARD value option BOARD_NONE (equivelent to not specifying BOARD) which will remove all board hardware drivers which do not adversely affect the code operation (currently only the LEDs driver).

Spell-check code/comments in the Webserver/AVRISP-MKII projects.

17 files changed, 26 insertions, 26 deletions

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
index c7e64a5eb..f327a47e8 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.c
@@ -66,7 +66,7 @@ static void TINYNVM_SendReadNVMRegister(const uint8_t Address)
  */

 static void TINYNVM_SendWriteNVMRegister(const uint8_t Address)

 {

-	/* The TPI command for writing to the I/O space uses wierd addressing, where the I/O address's upper

+	/* The TPI command for writing to the I/O space uses weird addressing, where the I/O address's upper

 	 * two bits of the 6-bit address are shifted left once */

 	XPROGTarget_SendByte(TPI_CMD_SOUT | ((Address & 0x30) << 1) | (Address & 0x0F));

 }

diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index 5c0fe0f64..2698de881 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD = USBKEY

diff --git a/Projects/Benito/makefile b/Projects/Benito/makefile
index 2f0040304..8b9d126a9 100644
--- a/Projects/Benito/makefile
+++ b/Projects/Benito/makefile
@@ -63,7 +63,7 @@
 MCU = atmega32u2

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USER

diff --git a/Projects/Incomplete/StandaloneProgrammer/makefile b/Projects/Incomplete/StandaloneProgrammer/makefile
index 074a279ac..9305373d8 100644
--- a/Projects/Incomplete/StandaloneProgrammer/makefile
+++ b/Projects/Incomplete/StandaloneProgrammer/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/LEDNotifier/makefile b/Projects/LEDNotifier/makefile
index 22a62b5e3..20cd598a6 100644
--- a/Projects/LEDNotifier/makefile
+++ b/Projects/LEDNotifier/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb646

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USER

diff --git a/Projects/Magstripe/makefile b/Projects/Magstripe/makefile
index 2571ad3a2..e2d87d800 100644
--- a/Projects/Magstripe/makefile
+++ b/Projects/Magstripe/makefile
@@ -63,10 +63,10 @@
 MCU = at90usb1287
 
 
-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring
+# Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USER
+BOARD  = NONE
 
 
 # Processor frequency.
diff --git a/Projects/MissileLauncher/makefile b/Projects/MissileLauncher/makefile
index 5f8c3bc6f..66ab8cb2f 100644
--- a/Projects/MissileLauncher/makefile
+++ b/Projects/MissileLauncher/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/TemperatureDataLogger/makefile b/Projects/TemperatureDataLogger/makefile
index a3da35ff3..622bb1c84 100644
--- a/Projects/TemperatureDataLogger/makefile
+++ b/Projects/TemperatureDataLogger/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/USBtoSerial/makefile b/Projects/USBtoSerial/makefile
index 3bdc15bb1..1a1adc075 100644
--- a/Projects/USBtoSerial/makefile
+++ b/Projects/USBtoSerial/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/Webserver/Lib/DHCPClientApp.c b/Projects/Webserver/Lib/DHCPClientApp.c
index 79170fabe..64cd70709 100644
--- a/Projects/Webserver/Lib/DHCPClientApp.c
+++ b/Projects/Webserver/Lib/DHCPClientApp.c
@@ -50,7 +50,7 @@ void DHCPClientApp_Init(void)
 	uip_ipaddr(&DHCPServerIPAddress, 255, 255, 255, 255);

 	AppState->DHCPClient.Connection = uip_udp_new(&DHCPServerIPAddress, HTONS(DHCPC_SERVER_PORT));

 	

-	/* If the connection was sucessfully created, bind it to the local DHCP client port */

+	/* If the connection was successfully created, bind it to the local DHCP client port */

 	if(AppState->DHCPClient.Connection != NULL)

 	{

 		uip_udp_bind(AppState->DHCPClient.Connection, HTONS(DHCPC_CLIENT_PORT));

@@ -240,7 +240,7 @@ uint8_t DHCPClientApp_SetOption(uint8_t* DHCPOptionList, uint8_t Option, uint8_t
  */

 bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Destination)

 {

-	/* Look through the incomming DHCP packet's options list for the requested option */

+	/* Look through the incoming DHCP packet's options list for the requested option */

 	while (*DHCPOptionList != DHCP_OPTION_END)

 	{

 		/* Check if the current DHCP option in the packet is the one requested */

@@ -249,7 +249,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
 			/* Copy request option's data to the destination buffer */

 			memcpy(Destination, &DHCPOptionList[2], DHCPOptionList[1]);

 			

-			/* Indicate that the requested option data was sucessfully retrieved */

+			/* Indicate that the requested option data was successfully retrieved */

 			return true;

 		}

 		

@@ -257,7 +257,7 @@ bool DHCPClientApp_GetOption(uint8_t* DHCPOptionList, uint8_t Option, void* Dest
 		DHCPOptionList += (DHCPOptionList[1] + 2);

 	}

 	

-	/* Requested option not found in the incomming packet's DHCP options list */

+	/* Requested option not found in the incoming packet's DHCP options list */

 	return false;

 }

 #endif

diff --git a/Projects/Webserver/Lib/HTTPServerApp.c b/Projects/Webserver/Lib/HTTPServerApp.c
index 081207c6b..c2263cb98 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.c
+++ b/Projects/Webserver/Lib/HTTPServerApp.c
@@ -150,7 +150,7 @@ void HTTPServerApp_Callback(void)
 	}		

 }

 

-/** HTTP Server State handler for the Request Process state. This state manages the processing of incomming HTTP

+/** HTTP Server State handler for the Request Process state. This state manages the processing of incoming HTTP

  *  GET requests to the server from the receiving HTTP client.

  */

 static void HTTPServerApp_OpenRequestedFile(void)

diff --git a/Projects/Webserver/Lib/HTTPServerApp.h b/Projects/Webserver/Lib/HTTPServerApp.h
index 13399b0f9..33a647bfe 100644
--- a/Projects/Webserver/Lib/HTTPServerApp.h
+++ b/Projects/Webserver/Lib/HTTPServerApp.h
@@ -64,7 +64,7 @@
 		} MIME_Type_t;

 	

 	/* Macros: */

-		/** TCP listen port for incomming HTTP traffic */

+		/** TCP listen port for incoming HTTP traffic */

 		#define HTTP_SERVER_PORT  80

 

 	/* Function Prototypes: */

diff --git a/Projects/Webserver/Lib/TELNETServerApp.h b/Projects/Webserver/Lib/TELNETServerApp.h
index 7b1eb46ee..ff34d1482 100644
--- a/Projects/Webserver/Lib/TELNETServerApp.h
+++ b/Projects/Webserver/Lib/TELNETServerApp.h
@@ -44,7 +44,7 @@
 		#include <uip.h>

 	

 	/* Macros: */

-		/** TCP listen port for incomming TELNET traffic */

+		/** TCP listen port for incoming TELNET traffic */

 		#define TELNET_SERVER_PORT  23

 		

 	/* Enums: */

diff --git a/Projects/Webserver/Lib/uIPManagement.c b/Projects/Webserver/Lib/uIPManagement.c
index 90629b893..c7773c455 100644
--- a/Projects/Webserver/Lib/uIPManagement.c
+++ b/Projects/Webserver/Lib/uIPManagement.c
@@ -30,7 +30,7 @@
 

 /** \file

  *

- *  uIP Managament functions. This file contains the functions and globals needed to maintain the uIP

+ *  uIP Management functions. This file contains the functions and globals needed to maintain the uIP

  *  stack once an RNDIS device has been attached to the system.

  */

 

@@ -87,7 +87,7 @@ void uIPManagement_ManageNetwork(void)
 {

 	if ((USB_CurrentMode == USB_MODE_HOST) && (USB_HostState == HOST_STATE_Configured))

 	{

-		uIPManagement_ProcessIncommingPacket();

+		uIPManagement_ProcessIncomingPacket();

 		uIPManagement_ManageConnections();

 	}

 }

@@ -123,8 +123,8 @@ void uIPManagement_UDPCallback(void)
 	}

 }

 

-/** Processes incomming packets to the server from the connected RNDIS device, creating responses as needed. */

-static void uIPManagement_ProcessIncommingPacket(void)

+/** Processes Incoming packets to the server from the connected RNDIS device, creating responses as needed. */

+static void uIPManagement_ProcessIncomingPacket(void)

 {

 	/* If no packet received, exit processing routine */

 	if (!(RNDIS_Host_IsPacketReceived(&Ethernet_RNDIS_Interface)))

@@ -132,7 +132,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
 	  

 	LEDs_SetAllLEDs(LEDMASK_USB_BUSY);

 

-	/* Read the incomming packet straight into the UIP packet buffer */

+	/* Read the Incoming packet straight into the UIP packet buffer */

 	RNDIS_Host_ReadPacket(&Ethernet_RNDIS_Interface, uip_buf, &uip_len);

 

 	/* If the packet contains an Ethernet frame, process it */

@@ -144,7 +144,7 @@ static void uIPManagement_ProcessIncommingPacket(void)
 				/* Filter packet by MAC destination */

 				uip_arp_ipin();

 

-				/* Process incomming packet */

+				/* Process Incoming packet */

 				uip_input();

 

 				/* If a response was generated, send it */

diff --git a/Projects/Webserver/Lib/uIPManagement.h b/Projects/Webserver/Lib/uIPManagement.h
index 1e7ffd0be..825c5cdef 100644
--- a/Projects/Webserver/Lib/uIPManagement.h
+++ b/Projects/Webserver/Lib/uIPManagement.h
@@ -69,7 +69,7 @@
 		void uIPManagement_UDPCallback(void);

 		

 		#if defined(INCLUDE_FROM_UIPMANAGEMENT_C)

-			static void uIPManagement_ProcessIncommingPacket(void);

+			static void uIPManagement_ProcessIncomingPacket(void);

 			static void uIPManagement_ManageConnections(void);

 		#endif

 		

diff --git a/Projects/Webserver/makefile b/Projects/Webserver/makefile
index daec03d0b..98ee03ca4 100644
--- a/Projects/Webserver/makefile
+++ b/Projects/Webserver/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = USBKEY

diff --git a/Projects/XPLAINBridge/makefile b/Projects/XPLAINBridge/makefile
index 831d53bbd..ba87e8a1f 100644
--- a/Projects/XPLAINBridge/makefile
+++ b/Projects/XPLAINBridge/makefile
@@ -63,7 +63,7 @@
 MCU = at90usb1287

 

 

-# Target board (see library "Board Types" documentation, USER or blank for projects not requiring

+# Target board (see library "Board Types" documentation, NONE for projects not requiring

 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 

 # "Board" inside the application directory.

 BOARD  = XPLAIN