Oops - revert commit of an incomplete port of the AVRISP-MKII project.

19 files changed, 164 insertions, 332 deletions

diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.c b/Projects/AVRISP-MKII/AVRISP-MKII.c
index d774b1119..654ce5471 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.c
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.c
@@ -45,14 +45,14 @@ int main(void)
 	V2Protocol_Init();
 
 	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	GlobalInterruptEnable();
-	
+	sei();
+
 	for (;;)
 	{
 		#if (BOARD == BOARD_USBTINYMKII)
-			/* On the USBTINY-MKII board target, there is a secondary LED which indicates the current selected
-			   power mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
-			LEDs_ChangeLEDs(LEDS_LED3, (PIND & (1 << 0)) ? 0 : LEDS_LED3);
+		/* On the USBTINY-MKII target, there is a secondary LED which indicates the current selected power
+		   mode - either VBUS, or sourced from the VTARGET pin of the programming connectors */
+		LEDs_ChangeLEDs(LEDMASK_VBUSPOWER, (PIND & (1 << 0)) ? 0 : LEDMASK_VBUSPOWER);
 		#endif
 
 		AVRISP_Task();
@@ -63,35 +63,13 @@ int main(void)
 /** Configures the board hardware and chip peripherals for the demo's functionality. */
 void SetupHardware(void)
 {
-	#if (ARCH == ARCH_AVR8)
-		/* Disable watchdog if enabled by bootloader/fuses */
-		MCUSR &= ~(1 << WDRF);
-		wdt_disable();
-
-		/* Disable clock division */
-		clock_prescale_set(clock_div_1);
-	#elif (ARCH == ARCH_UC3)
-		/* Select slow startup, external high frequency crystal attached to OSC0 */
-		AVR32_PM.OSCCTRL0.mode    = 7;
-		AVR32_PM.OSCCTRL0.startup = 6;
-		AVR32_PM.MCCTRL.osc0en    = true;
-		while (!(AVR32_PM.POSCSR.osc0rdy));
-
-		/* Switch CPU core to use OSC0 as the system clock */
-		AVR32_PM.MCCTRL.mcsel     = 1;
-
-		/* Start PLL1 to feed into the USB generic clock module */
-		AVR32_PM.PLL[1].pllmul    = (F_USB / F_CPU) ? (((F_USB / F_CPU) - 1) / 2) : 0;
-		AVR32_PM.PLL[1].plldiv    = 0;
-		AVR32_PM.PLL[1].pllosc    = 0;	
-		AVR32_PM.PLL[1].pllen     = true;
-		while (!(AVR32_PM.POSCSR.lock1));
-	
-		/* Configure interrupt management peripheral */
-//		INTC_Init();
-		INTC_RegisterGroupHandler(AVR32_USBB_IRQ, AVR32_INTC_INT0, USB_GEN_vect);	
-	#endif
-	
+	/* Disable watchdog if enabled by bootloader/fuses */
+	MCUSR &= ~(1 << WDRF);
+	wdt_disable();
+
+	/* Disable clock division */
+	clock_prescale_set(clock_div_1);
+
 	/* Hardware Initialization */
 	LEDs_Init();
 	USB_Init();
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h
index 5a0d09111..2650b4939 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.h
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.h
@@ -37,7 +37,11 @@
 #define _AVRISP_H_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <avr/wdt.h>
+		#include <avr/interrupt.h>
+		#include <avr/power.h>
+
 		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
@@ -46,17 +50,6 @@
 			#include <LUFA/Drivers/Peripheral/ADC.h>
 		#endif
 
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/wdt.h>
-			#include <avr/interrupt.h>
-			#include <avr/power.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>
-
-			#include <LUFA/Platform/UC3/INTC_UC3.h> // TODO: FIXME
-		#endif
-
 		#include "Descriptors.h"
 		#include "Lib/V2Protocol.h"
 
@@ -76,6 +69,9 @@
 		/** LED mask for the library LED driver, to indicate that the USB interface is busy. */
 		#define LEDMASK_BUSY             (LEDS_LED1 | LEDS_LED2)
 
+		/** LED mask for the library LED driver, to indicate that the target is being powered by VBUS. */
+		#define LEDMASK_VBUSPOWER         LEDS_LED3
+
 	/* Function Prototypes: */
 		void SetupHardware(void);
 		void AVRISP_Task(void);
diff --git a/Projects/AVRISP-MKII/Descriptors.c b/Projects/AVRISP-MKII/Descriptors.c
index 9889820cf..a84b75f38 100644
--- a/Projects/AVRISP-MKII/Descriptors.c
+++ b/Projects/AVRISP-MKII/Descriptors.c
@@ -53,8 +53,8 @@ const USB_Descriptor_Device_t PROGMEM DeviceDescriptor =
 
 	.Endpoint0Size          = FIXED_CONTROL_ENDPOINT_SIZE,
 
-	.VendorID               = CPU_TO_LE16(0x03EB),
-	.ProductID              = CPU_TO_LE16(0x2104),
+	.VendorID               = 0x03EB,
+	.ProductID              = 0x2104,
 	.ReleaseNumber          = VERSION_BCD(02.00),
 
 	.ManufacturerStrIndex   = 0x01,
@@ -75,7 +75,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 		{
 			.Header                 = {.Size = sizeof(USB_Descriptor_Configuration_Header_t), .Type = DTYPE_Configuration},
 
-			.TotalConfigurationSize = CPU_TO_LE16(sizeof(USB_Descriptor_Configuration_t)),
+			.TotalConfigurationSize = sizeof(USB_Descriptor_Configuration_t),
 			.TotalInterfaces        = 1,
 
 			.ConfigurationNumber    = 1,
@@ -108,7 +108,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_IN | AVRISP_DATA_IN_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CPU_TO_LE16(AVRISP_DATA_EPSIZE),
+			.EndpointSize           = AVRISP_DATA_EPSIZE,
 			.PollingIntervalMS      = 0x0A
 		},
 
@@ -118,7 +118,7 @@ const USB_Descriptor_Configuration_t PROGMEM ConfigurationDescriptor =
 
 			.EndpointAddress        = (ENDPOINT_DESCRIPTOR_DIR_OUT | AVRISP_DATA_OUT_EPNUM),
 			.Attributes             = (EP_TYPE_BULK | ENDPOINT_ATTR_NO_SYNC | ENDPOINT_USAGE_DATA),
-			.EndpointSize           = CPU_TO_LE16(AVRISP_DATA_EPSIZE),
+			.EndpointSize           = AVRISP_DATA_EPSIZE,
 			.PollingIntervalMS      = 0x0A
 		},
 };
@@ -142,17 +142,7 @@ const USB_Descriptor_String_t PROGMEM ManufacturerString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(11), .Type = DTYPE_String},
 
-	.UnicodeString          = {CPU_TO_LE16('D'),
-	                           CPU_TO_LE16('e'), 
-	                           CPU_TO_LE16('a'), 
-	                           CPU_TO_LE16('n'), 
-	                           CPU_TO_LE16(' '), 
-	                           CPU_TO_LE16('C'), 
-	                           CPU_TO_LE16('a'), 
-	                           CPU_TO_LE16('m'), 
-	                           CPU_TO_LE16('e'), 
-	                           CPU_TO_LE16('r'), 
-	                           CPU_TO_LE16('a')}
+	.UnicodeString          = L"Dean Camera"
 };
 
 /** Product descriptor string. This is a Unicode string containing the product's details in human readable form,
@@ -163,28 +153,7 @@ const USB_Descriptor_String_t PROGMEM ProductString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(22), .Type = DTYPE_String},
 
-	.UnicodeString          = {CPU_TO_LE16('L'), 
-	                           CPU_TO_LE16('U'), 
-	                           CPU_TO_LE16('F'), 
-	                           CPU_TO_LE16('A'), 
-	                           CPU_TO_LE16(' '), 
-	                           CPU_TO_LE16('A'), 
-	                           CPU_TO_LE16('V'), 
-	                           CPU_TO_LE16('R'), 
-	                           CPU_TO_LE16('I'), 
-	                           CPU_TO_LE16('S'), 
-	                           CPU_TO_LE16('P'), 
-	                           CPU_TO_LE16(' '), 
-	                           CPU_TO_LE16('M'), 
-	                           CPU_TO_LE16('k'), 
-	                           CPU_TO_LE16('I'), 
-	                           CPU_TO_LE16('I'), 
-	                           CPU_TO_LE16(' '), 
-	                           CPU_TO_LE16('C'), 
-	                           CPU_TO_LE16('l'), 
-	                           CPU_TO_LE16('o'), 
-	                           CPU_TO_LE16('n'), 
-	                           CPU_TO_LE16('e')}
+	.UnicodeString          = L"LUFA AVRISP MkII Clone"
 };
 
 /** Serial number string. This is a Unicode string containing the device's unique serial number, expressed as a
@@ -194,19 +163,7 @@ const USB_Descriptor_String_t PROGMEM SerialString =
 {
 	.Header                 = {.Size = USB_STRING_LEN(13), .Type = DTYPE_String},
 
-	.UnicodeString          = {CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('A'), 
-	                           CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('0'), 
-	                           CPU_TO_LE16('1'), 
-	                           CPU_TO_LE16('2'), 
-	                           CPU_TO_LE16('8'), 
-	                           CPU_TO_LE16('2'), 
-	                           CPU_TO_LE16('5'), 
-	                           CPU_TO_LE16('5')}
+	.UnicodeString          = L"0000A00128255"
 };
 
 /** This function is called by the library when in device mode, and must be overridden (see library "USB Descriptors"
diff --git a/Projects/AVRISP-MKII/Descriptors.h b/Projects/AVRISP-MKII/Descriptors.h
index c831cffd6..ca68fd518 100644
--- a/Projects/AVRISP-MKII/Descriptors.h
+++ b/Projects/AVRISP-MKII/Descriptors.h
@@ -37,18 +37,11 @@
 #define _DESCRIPTORS_H_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
+		#include <avr/pgmspace.h>
 
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/pgmspace.h>
-		#endif
+		#include <LUFA/Drivers/USB/USB.h>
 
 	/* Macros: */
-		#if (ARCH == ARCH_UC3) // TODO: FIXME
-			#define PROGMEM const
-		#endif
-	
 		#if !defined(LIBUSB_DRIVER_COMPAT)
 			/** Endpoint number of the AVRISP data OUT endpoint. */
 			#define AVRISP_DATA_OUT_EPNUM      2
@@ -77,7 +70,7 @@
 			USB_Descriptor_Interface_t               AVRISP_Interface;
 			USB_Descriptor_Endpoint_t                AVRISP_DataInEndpoint;
 			USB_Descriptor_Endpoint_t                AVRISP_DataOutEndpoint;
-		} ATTR_PACKED USB_Descriptor_Configuration_t;
+		} USB_Descriptor_Configuration_t;
 
 	/* Function Prototypes: */
 		uint16_t CALLBACK_USB_GetDescriptor(const uint16_t wValue,
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index 2e31c1819..ccd31f3d2 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -52,7 +52,7 @@ void ISPProtocol_EnterISPMode(void)
 		uint8_t PollValue;
 		uint8_t PollIndex;
 		uint8_t EnterProgBytes[4];
-	} ATTR_PACKED Enter_ISP_Params;
+	} Enter_ISP_Params;
 
 	Endpoint_Read_Stream_LE(&Enter_ISP_Params, sizeof(Enter_ISP_Params), NULL);
 
@@ -107,7 +107,7 @@ void ISPProtocol_LeaveISPMode(void)
 	{
 		uint8_t PreDelayMS;
 		uint8_t PostDelayMS;
-	} ATTR_PACKED Leave_ISP_Params;
+	} Leave_ISP_Params;
 
 	Endpoint_Read_Stream_LE(&Leave_ISP_Params, sizeof(Leave_ISP_Params), NULL);
 
@@ -141,12 +141,12 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 		uint8_t  ProgrammingCommands[3];
 		uint8_t  PollValue1;
 		uint8_t  PollValue2;
-		uint8_t  ProgData[256];        // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
-	} ATTR_PACKED Write_Memory_Params; // whole page and ACK the packet as fast as possible to prevent it from aborting
+		uint8_t  ProgData[256]; // Note, the Jungo driver has a very short ACK timeout period, need to buffer the
+	} Write_Memory_Params;      // whole page and ACK the packet as fast as possible to prevent it from aborting
 
 	Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
 	                                               sizeof(Write_Memory_Params.ProgData)), NULL);
-	Write_Memory_Params.BytesToWrite = be16_to_cpu(Write_Memory_Params.BytesToWrite);
+	Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
 	
 	if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
 	{
@@ -286,10 +286,10 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
 	{
 		uint16_t BytesToRead;
 		uint8_t  ReadMemoryCommand;
-	} ATTR_PACKED Read_Memory_Params;
+	} Read_Memory_Params;
 
 	Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params), NULL);
-	Read_Memory_Params.BytesToRead = be16_to_cpu(Read_Memory_Params.BytesToRead);
+	Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
 	
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
@@ -360,7 +360,7 @@ void ISPProtocol_ChipErase(void)
 		uint8_t EraseDelayMS;
 		uint8_t PollMethod;
 		uint8_t EraseCommandBytes[4];
-	} ATTR_PACKED Erase_Chip_Params;
+	} Erase_Chip_Params;
 
 	Endpoint_Read_Stream_LE(&Erase_Chip_Params, sizeof(Erase_Chip_Params), NULL);
 
@@ -396,7 +396,7 @@ void ISPProtocol_ReadFuseLockSigOSCCAL(uint8_t V2Command)
 	{
 		uint8_t RetByte;
 		uint8_t ReadCommandBytes[4];
-	} ATTR_PACKED Read_FuseLockSigOSCCAL_Params;
+	} Read_FuseLockSigOSCCAL_Params;
 
 	Endpoint_Read_Stream_LE(&Read_FuseLockSigOSCCAL_Params, sizeof(Read_FuseLockSigOSCCAL_Params), NULL);
 
@@ -427,7 +427,7 @@ void ISPProtocol_WriteFuseLock(uint8_t V2Command)
 	struct
 	{
 		uint8_t WriteCommandBytes[4];
-	} ATTR_PACKED Write_FuseLockSig_Params;
+	} Write_FuseLockSig_Params;
 
 	Endpoint_Read_Stream_LE(&Write_FuseLockSig_Params, sizeof(Write_FuseLockSig_Params), NULL);
 
@@ -454,7 +454,7 @@ void ISPProtocol_SPIMulti(void)
 		uint8_t RxBytes;
 		uint8_t RxStartAddr;
 		uint8_t TxData[255];
-	} ATTR_PACKED SPI_Multi_Params;
+	} SPI_Multi_Params;
 
 	Endpoint_Read_Stream_LE(&SPI_Multi_Params, (sizeof(SPI_Multi_Params) - sizeof(SPI_Multi_Params.TxData)), NULL);
 	Endpoint_Read_Stream_LE(&SPI_Multi_Params.TxData, SPI_Multi_Params.TxBytes, NULL);
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
index 8b0861971..213ce5ce6 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
@@ -37,14 +37,10 @@
 #define _ISP_PROTOCOL_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <util/delay.h>
+
 		#include <LUFA/Drivers/USB/USB.h>
-		
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
 
 		#include "../V2Protocol.h"
 
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
index e183dee0f..057aa7ad1 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
@@ -37,19 +37,12 @@
 #define _ISP_TARGET_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <avr/pgmspace.h>
+		#include <util/delay.h>
+
 		#include <LUFA/Drivers/USB/USB.h>
-		
-		#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
-			#include <LUFA/Drivers/Peripheral/SPI.h> // TODO: FIXME
-		#endif
-		
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/pgmspace.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
+		#include <LUFA/Drivers/Peripheral/SPI.h>
 
 		#include "../V2ProtocolParams.h"
 
@@ -91,7 +84,6 @@
 		                                      const uint8_t ReadMemCommand);
 
 	/* Inline Functions: */
-		#if defined(ENABLE_ISP_PROTOCOL) || defined(__DOXYGEN__)
 		/** Sends a byte of ISP data to the attached target, using the appropriate SPI hardware or
 		 *  software routines depending on the selected ISP speed.
 		 *
@@ -132,7 +124,6 @@
 			else
 			  return ISPTarget_TransferSoftSPIByte(Byte);
 		}
-		#endif
 
 #endif
 
diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.c b/Projects/AVRISP-MKII/Lib/V2Protocol.c
index a955a95a8..f763d6333 100644
--- a/Projects/AVRISP-MKII/Lib/V2Protocol.c
+++ b/Projects/AVRISP-MKII/Lib/V2Protocol.c
@@ -42,17 +42,13 @@ uint32_t CurrentAddress;
 /** Flag to indicate that the next read/write operation must update the device's current extended FLASH address */
 bool MustLoadExtendedAddress;
 
-/** Command timeout expiration flag. */
-volatile bool TimeoutExpired;
 
-#if (ARCH == ARCH_AVR8) // TODO: FIXME
 /** ISR to manage timeouts whilst processing a V2Protocol command */
 ISR(WDT_vect, ISR_BLOCK)
 {
 	TimeoutExpired = true;
 	wdt_disable();
 }
-#endif
 
 /** Initialises the hardware and software associated with the V2 protocol command handling. */
 void V2Protocol_Init(void)
@@ -79,12 +75,10 @@ void V2Protocol_ProcessCommand(void)
 {
 	uint8_t V2Command = Endpoint_Read_8();
 
-	#if (ARCH == ARCH_AVR8) // TODO: FIXME
 	/* Start the watchdog with timeout interrupt enabled to manage the timeout */
 	TimeoutExpired = false;
 	wdt_enable(WDTO_1S);
 	WDTCSR |= (1 << WDIE);
-	#endif
 
 	switch (V2Command)
 	{
@@ -146,10 +140,8 @@ void V2Protocol_ProcessCommand(void)
 			break;
 	}
 
-	#if (ARCH == ARCH_AVR8) // TODO: FIXME
 	/* Disable the timeout management watchdog timer */
 	wdt_disable();
-	#endif
 
 	Endpoint_WaitUntilReady();
 	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.h b/Projects/AVRISP-MKII/Lib/V2Protocol.h
index c2f0ee072..8e9e6ff38 100644
--- a/Projects/AVRISP-MKII/Lib/V2Protocol.h
+++ b/Projects/AVRISP-MKII/Lib/V2Protocol.h
@@ -37,17 +37,12 @@
 #define _V2_PROTOCOL_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <avr/interrupt.h>
+		#include <avr/wdt.h>
+	
 		#include <LUFA/Drivers/USB/USB.h>
 
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/interrupt.h>
-			#include <avr/wdt.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>
-		#endif
-		
 		#include "../Descriptors.h"
 		#include "V2ProtocolConstants.h"
 		#include "V2ProtocolParams.h"
@@ -74,13 +69,15 @@
 		/** Timeout period for each issued command from the host before it is aborted (in 10ms ticks). */
 		#define COMMAND_TIMEOUT_TICKS      100
 
+		/** Command timeout expiration flag, GPIOR for speed. */
+		#define TimeoutExpired             GPIOR1
+
 		/** MUX mask for the VTARGET ADC channel number. */
 		#define VTARGET_ADC_CHANNEL_MASK   ADC_GET_CHANNEL_MASK(VTARGET_ADC_CHANNEL)
 
 	/* External Variables: */
-		extern uint32_t      CurrentAddress;
-		extern bool          MustLoadExtendedAddress;
-		extern volatile bool TimeoutExpired;
+		extern uint32_t CurrentAddress;
+		extern bool     MustLoadExtendedAddress;
 
 	/* Function Prototypes: */
 		void V2Protocol_Init(void);
diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h b/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
index f4fad5eff..716e5fadb 100644
--- a/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
+++ b/Projects/AVRISP-MKII/Lib/V2ProtocolConstants.h
@@ -73,7 +73,6 @@
 		#define STATUS_CONN_FAIL_SCK        0x04
 		#define STATUS_TGT_NOT_DETECTED     0x10
 		#define STATUS_TGT_REVERSE_INSERTED 0x20
-		#define STATUS_ANSWER_CKSUM_ERROR 	0xB0
 
 		#define PARAM_BUILD_NUMBER_LOW      0x80
 		#define PARAM_BUILD_NUMBER_HIGH     0x81
diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
index 6342d75b3..3c1a88130 100644
--- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
+++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.c
@@ -37,7 +37,7 @@
 #include "V2ProtocolParams.h"
 
 /* Non-Volatile Parameter Values for EEPROM storage */
-static uint8_t EEMEM EEPROM_Reset_Polarity = 0x00;
+static uint8_t EEMEM EEPROM_Rest_Polarity = 0x00;
 
 /* Volatile Parameter Values for RAM storage */
 static ParameterItem_t ParameterTable[] =
@@ -88,7 +88,7 @@ static ParameterItem_t ParameterTable[] =
 void V2Params_LoadNonVolatileParamValues(void)
 {
 	/* Target RESET line polarity is a non-volatile value, retrieve current parameter value from EEPROM */
-	V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Reset_Polarity);
+	V2Params_GetParamFromTable(PARAM_RESET_POLARITY)->ParamValue = eeprom_read_byte(&EEPROM_Rest_Polarity);
 }
 
 /** Updates any parameter values that are sourced from hardware rather than explicitly set by the host, such as
@@ -163,7 +163,7 @@ void V2Params_SetParameterValue(const uint8_t ParamID,
 
 	/* The target RESET line polarity is a non-volatile parameter, save to EEPROM when changed */
 	if (ParamID == PARAM_RESET_POLARITY)
-	  eeprom_update_byte(&EEPROM_Reset_Polarity, Value);
+	  eeprom_update_byte(&EEPROM_Rest_Polarity, Value);
 }
 
 /** Retrieves a parameter entry (including ID, value and privileges) from the parameter table that matches the given
diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
index 4ef091ce7..f4479d308 100644
--- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
+++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
@@ -37,20 +37,15 @@
 #define _V2_PROTOCOL_PARAMS_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <avr/eeprom.h>
+
 		#include <LUFA/Version.h>
 
 		#if defined(ADC)
 			#include <LUFA/Drivers/Peripheral/ADC.h>
 		#endif
 
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/eeprom.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>		
-		#endif
-
 		#include "V2Protocol.h"
 		#include "V2ProtocolConstants.h"
 		#include "ISP/ISPTarget.h"
@@ -64,12 +59,6 @@
 
 		/** Total number of parameters in the parameter table */
 		#define TABLE_PARAM_COUNT   (sizeof(ParameterTable) / sizeof(ParameterTable[0]))
-		
-		#if (ARCH == ARCH_UC3) // TODO: FIXME
-			#define EEMEM
-			#define eeprom_read_byte(x) *x
-			#define eeprom_update_byte(x,y) *x=y
-		#endif
 
 	/* Type Defines: */
 		/** Type define for a parameter table entry indicating a PC readable or writable device parameter. */
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
index 089341592..b2b37e916 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
@@ -37,17 +37,12 @@
 #define _TINY_NVM_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
-
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/interrupt.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
-		
+		#include <avr/io.h>
+		#include <avr/interrupt.h>
 		#include <stdbool.h>
 
+		#include <LUFA/Common/Common.h>
+
 		#include "XPROGProtocol.h"
 		#include "XPROGTarget.h"
 
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
index 11f79326b..48fa8eb96 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
@@ -37,17 +37,12 @@
 #define _XMEGA_NVM_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
-
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/interrupt.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
-		
+		#include <avr/io.h>
+		#include <avr/interrupt.h>
 		#include <stdbool.h>
 
+		#include <LUFA/Common/Common.h>
+
 		#include "XPROGProtocol.h"
 		#include "XPROGTarget.h"
 
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 778a7df9b..72cc53636 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -60,7 +60,7 @@ void XPROGProtocol_SetMode(void)
 	struct
 	{
 		uint8_t Protocol;
-	} ATTR_PACKED SetMode_XPROG_Params;
+	} SetMode_XPROG_Params;
 
 	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NULL);
 
@@ -163,10 +163,10 @@ static void XPROGProtocol_Erase(void)
 	{
 		uint8_t  MemoryType;
 		uint32_t Address;
-	} ATTR_PACKED Erase_XPROG_Params;
+	} Erase_XPROG_Params;
 
 	Endpoint_Read_Stream_LE(&Erase_XPROG_Params, sizeof(Erase_XPROG_Params), NULL);
-	Erase_XPROG_Params.Address = be32_to_cpu(Erase_XPROG_Params.Address);
+	Erase_XPROG_Params.Address = SwapEndian_32(Erase_XPROG_Params.Address);
 
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
@@ -242,12 +242,12 @@ static void XPROGProtocol_WriteMemory(void)
 		uint32_t Address;
 		uint16_t Length;
 		uint8_t  ProgData[256];
-	} ATTR_PACKED WriteMemory_XPROG_Params;
+	} WriteMemory_XPROG_Params;
 
 	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
 	                                                    sizeof(WriteMemory_XPROG_Params).ProgData), NULL);
-	WriteMemory_XPROG_Params.Address = be32_to_cpu(WriteMemory_XPROG_Params.Address);
-	WriteMemory_XPROG_Params.Length  = be16_to_cpu(WriteMemory_XPROG_Params.Length);
+	WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
+	WriteMemory_XPROG_Params.Length  = SwapEndian_16(WriteMemory_XPROG_Params.Length);
 	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length, NULL);
 
 	// The driver will terminate transfers that are a round multiple of the endpoint bank in size with a ZLP, need
@@ -335,11 +335,11 @@ static void XPROGProtocol_ReadMemory(void)
 		uint8_t  MemoryType;
 		uint32_t Address;
 		uint16_t Length;
-	} ATTR_PACKED ReadMemory_XPROG_Params;
+	} ReadMemory_XPROG_Params;
 
 	Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NULL);
-	ReadMemory_XPROG_Params.Address = be32_to_cpu(ReadMemory_XPROG_Params.Address);
-	ReadMemory_XPROG_Params.Length  = be16_to_cpu(ReadMemory_XPROG_Params.Length);
+	ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
+	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);
 
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
@@ -380,7 +380,7 @@ static void XPROGProtocol_ReadCRC(void)
 	struct
 	{
 		uint8_t CRCType;
-	} ATTR_PACKED ReadCRC_XPROG_Params;
+	} ReadCRC_XPROG_Params;
 
 	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NULL);
 
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
index 9c7986e55..d637c79ea 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
@@ -37,18 +37,12 @@
 #define _XPROG_PROTOCOL_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
-		#include <LUFA/Drivers/USB/USB.h>
-
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
-		
-		#include <stdbool.h>
+		#include <avr/io.h>
+		#include <util/delay.h>
 		#include <stdio.h>
 
+		#include <LUFA/Drivers/USB/USB.h>
+
 		#include "../V2Protocol.h"
 		#include "XMEGANVM.h"
 		#include "TINYNVM.h"
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
index 70e49f7c6..0a2dee73b 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.c
@@ -46,22 +46,18 @@ void XPROGTarget_EnableTargetPDI(void)
 {
 	IsSending = false;
 
-	#if (ARCH == ARCH_AVR8)
-		/* Set Tx and XCK as outputs, Rx as input */
-		DDRD |=  (1 << 5) | (1 << 3);
-		DDRD &= ~(1 << 2);
-
-		/* Set DATA line high for at least 90ns to disable /RESET functionality */
-		PORTD |= (1 << 3);
-		Delay_MS(1);
-
-		/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
-		UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
-		UCSR1B = (1 << TXEN1);
-		UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Set Tx and XCK as outputs, Rx as input */
+	DDRD |=  (1 << 5) | (1 << 3);
+	DDRD &= ~(1 << 2);
+
+	/* Set DATA line high for at least 90ns to disable /RESET functionality */
+	PORTD |= (1 << 3);
+	_delay_us(1);
+
+	/* Set up the synchronous USART for XMEGA communications - 8 data bits, even parity, 2 stop bits */
+	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
+	UCSR1B = (1 << TXEN1);
+	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
 	/* Send two IDLEs of 12 bits each to enable PDI interface (need at least 16 idle bits) */
 	XPROGTarget_SendIdle();
@@ -73,23 +69,19 @@ void XPROGTarget_EnableTargetTPI(void)
 {
 	IsSending = false;
 
-	#if (ARCH == ARCH_AVR8)
-		/* Set /RESET line low for at least 400ns to enable TPI functionality */
-		AUX_LINE_DDR  |=  AUX_LINE_MASK;
-		AUX_LINE_PORT &= ~AUX_LINE_MASK;
-		Delay_MS(1);
+	/* Set /RESET line low for at least 400ns to enable TPI functionality */
+	AUX_LINE_DDR  |=  AUX_LINE_MASK;
+	AUX_LINE_PORT &= ~AUX_LINE_MASK;
+	_delay_us(1);
 
-		/* Set Tx and XCK as outputs, Rx as input */
-		DDRD |=  (1 << 5) | (1 << 3);
-		DDRD &= ~(1 << 2);
+	/* Set Tx and XCK as outputs, Rx as input */
+	DDRD |=  (1 << 5) | (1 << 3);
+	DDRD &= ~(1 << 2);
 
-		/* Set up the synchronous USART for TINY communications - 8 data bits, even parity, 2 stop bits */
-		UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
-		UCSR1B = (1 << TXEN1);
-		UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Set up the synchronous USART for TINY communications - 8 data bits, even parity, 2 stop bits */
+	UBRR1  = ((F_CPU / 2 / XPROG_HARDWARE_SPEED) - 1);
+	UCSR1B = (1 << TXEN1);
+	UCSR1C = (1 << UMSEL10) | (1 << UPM11) | (1 << USBS1) | (1 << UCSZ11) | (1 << UCSZ10) | (1 << UCPOL1);
 
 	/* Send two IDLEs of 12 bits each to enable TPI interface (need at least 16 idle bits) */
 	XPROGTarget_SendIdle();
@@ -102,18 +94,14 @@ void XPROGTarget_DisableTargetPDI(void)
 	/* Switch to Rx mode to ensure that all pending transmissions are complete */
 	XPROGTarget_SetRxMode();
 
-	#if (ARCH == ARCH_AVR8)
-		/* Turn off receiver and transmitter of the USART, clear settings */
-		UCSR1A  = ((1 << TXC1) | (1 << RXC1));
-		UCSR1B  = 0;
-		UCSR1C  = 0;
-
-		/* Tristate all pins */
-		DDRD  &= ~((1 << 5) | (1 << 3));
-		PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Turn off receiver and transmitter of the USART, clear settings */
+	UCSR1A  = ((1 << TXC1) | (1 << RXC1));
+	UCSR1B  = 0;
+	UCSR1C  = 0;
+
+	/* Tristate all pins */
+	DDRD  &= ~((1 << 5) | (1 << 3));
+	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
 }
 
 /** Disables the target's TPI interface, exits programming mode and starts the target's application. */
@@ -122,22 +110,18 @@ void XPROGTarget_DisableTargetTPI(void)
 	/* Switch to Rx mode to ensure that all pending transmissions are complete */
 	XPROGTarget_SetRxMode();
 
-	#if (ARCH == ARCH_AVR8)
-		/* Turn off receiver and transmitter of the USART, clear settings */
-		UCSR1A |= (1 << TXC1) | (1 << RXC1);
-		UCSR1B  = 0;
-		UCSR1C  = 0;
-
-		/* Set all USART lines as inputs, tristate */
-		DDRD  &= ~((1 << 5) | (1 << 3));
-		PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
-		
-		/* Tristate target /RESET line */
-		AUX_LINE_DDR  &= ~AUX_LINE_MASK;
-		AUX_LINE_PORT &= ~AUX_LINE_MASK;
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Turn off receiver and transmitter of the USART, clear settings */
+	UCSR1A |= (1 << TXC1) | (1 << RXC1);
+	UCSR1B  = 0;
+	UCSR1C  = 0;
+
+	/* Set all USART lines as inputs, tristate */
+	DDRD  &= ~((1 << 5) | (1 << 3));
+	PORTD &= ~((1 << 5) | (1 << 3) | (1 << 2));
+	
+	/* Tristate target /RESET line */
+	AUX_LINE_DDR  &= ~AUX_LINE_MASK;
+	AUX_LINE_PORT &= ~AUX_LINE_MASK;
 }
 
 /** Sends a byte via the USART.
@@ -150,14 +134,10 @@ void XPROGTarget_SendByte(const uint8_t Byte)
 	if (!(IsSending))
 	  XPROGTarget_SetTxMode();
 
-	#if (ARCH == ARCH_AVR8)
-		/* Wait until there is space in the hardware Tx buffer before writing */
-		while (!(UCSR1A & (1 << UDRE1)));
-		UCSR1A |= (1 << TXC1);
-		UDR1    = Byte;
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Wait until there is space in the hardware Tx buffer before writing */
+	while (!(UCSR1A & (1 << UDRE1)));
+	UCSR1A |= (1 << TXC1);
+	UDR1    = Byte;
 }
 
 /** Receives a byte via the software USART, blocking until data is received.
@@ -170,15 +150,10 @@ uint8_t XPROGTarget_ReceiveByte(void)
 	if (IsSending)
 	  XPROGTarget_SetRxMode();
 
-	#if (ARCH == ARCH_AVR8)
-		/* Wait until a byte has been received before reading */
-		while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));
+	/* Wait until a byte has been received before reading */
+	while (!(UCSR1A & (1 << RXC1)) && !(TimeoutExpired));
 
-		return UDR1;
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-		return 0;
-	#endif
+	return UDR1;
 }
 
 /** Sends an IDLE via the USART to the attached target, consisting of a full frame of idle bits. */
@@ -188,52 +163,40 @@ void XPROGTarget_SendIdle(void)
 	if (!(IsSending))
 	  XPROGTarget_SetTxMode();
 	
-	#if (ARCH == ARCH_AVR8)
-		/* Need to do nothing for a full frame to send an IDLE */
-		for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
-		{
-			/* Wait for a full cycle of the clock */
-			while (PIND & (1 << 5));
-			while (!(PIND & (1 << 5)));
-		}
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	/* Need to do nothing for a full frame to send an IDLE */
+	for (uint8_t i = 0; i < BITS_IN_USART_FRAME; i++)
+	{
+		/* Wait for a full cycle of the clock */
+		while (PIND & (1 << 5));
+		while (!(PIND & (1 << 5)));
+	}
 }
 
 static void XPROGTarget_SetTxMode(void)
 {
-	#if (ARCH == ARCH_AVR8)
-		/* Wait for a full cycle of the clock */
-		while (PIND & (1 << 5));
-		while (!(PIND & (1 << 5)));
+	/* Wait for a full cycle of the clock */
+	while (PIND & (1 << 5));
+	while (!(PIND & (1 << 5)));
 
-		PORTD  |=  (1 << 3);
-		DDRD   |=  (1 << 3);
+	PORTD  |=  (1 << 3);
+	DDRD   |=  (1 << 3);
 
-		UCSR1B &= ~(1 << RXEN1);
-		UCSR1B |=  (1 << TXEN1);
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	UCSR1B &= ~(1 << RXEN1);
+	UCSR1B |=  (1 << TXEN1);
 
 	IsSending = true;
 }
 
 static void XPROGTarget_SetRxMode(void)
 {
-	#if (ARCH == ARCH_AVR8)
-		while (!(UCSR1A & (1 << TXC1)));
-		UCSR1A |=  (1 << TXC1);
-
-		UCSR1B &= ~(1 << TXEN1);
-		UCSR1B |=  (1 << RXEN1);
-
-		DDRD   &= ~(1 << 3);
-		PORTD  &= ~(1 << 3);
-	#elif (ARCH == ARCH_UC3)
-		// TODO: FIXME
-	#endif
+	while (!(UCSR1A & (1 << TXC1)));
+	UCSR1A |=  (1 << TXC1);
+
+	UCSR1B &= ~(1 << TXEN1);
+	UCSR1B |=  (1 << RXEN1);
+
+	DDRD   &= ~(1 << 3);
+	PORTD  &= ~(1 << 3);
 
 	IsSending = false;
 }
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index e2194b3fe..ebc563933 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -37,14 +37,11 @@
 #define _XPROG_TARGET_
 
 	/* Includes: */
-		#include <LUFA/Common/Common.h>
+		#include <avr/io.h>
+		#include <avr/interrupt.h>
+		#include <stdbool.h>
 
-		#if (ARCH == ARCH_AVR8)
-			#include <avr/io.h>
-			#include <avr/interrupt.h>
-		#elif (ARCH == ARCH_UC3)
-			#include <avr32/io.h>			
-		#endif
+		#include <LUFA/Common/Common.h>
 
 		#include "../V2Protocol.h"
 		#include "XPROGProtocol.h"
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index d9129237e..de1e225da 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -174,7 +174,7 @@ CPPSRC =
 #     Even though the DOS/Win* filesystem matches both .s and .S the same,
 #     it will preserve the spelling of the filenames, and gcc itself does
 #     care about how the name is spelled on its command-line.
-ASRC = 
+ASRC =
 
 
 # Optimization level, can be [0, 1, 2, 3, s].