Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

1 files changed, 25 insertions, 24 deletions

diff --git a/Projects/TempDataLogger/makefile b/Projects/TempDataLogger/makefile
index 9f4942251..ec0153f5f 100644
--- a/Projects/TempDataLogger/makefile
+++ b/Projects/TempDataLogger/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -64,14 +64,14 @@ MCU = at90usb1287
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
 BOARD = USBKEY
 
 
 # Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
@@ -84,7 +84,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_CLOCK, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -146,7 +146,7 @@ SRC = $(TARGET).c                                                 \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = 
+CPPSRC =
 
 
 # List Assembler source files here.
@@ -159,7 +159,7 @@ CPPSRC =
 ASRC =
 
 
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -273,7 +273,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
@@ -286,7 +286,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
+PRINTF_LIB =
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -298,7 +298,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
+SCANF_LIB =
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -310,7 +310,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
+EXTRALIBDIRS =
 
 
 
@@ -333,7 +333,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -367,7 +367,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
@@ -401,7 +401,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -430,7 +430,7 @@ WINSHELL = cmd
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -449,10 +449,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 
 
 # Compiler flags to generate dependency files.
@@ -517,11 +517,11 @@ sizeafter:
 
 
 # Display compiler version information.
-gccversion : 
+gccversion :
 	@$(CC) --version
 
 
-# Program the device.  
+# Program the device.
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
@@ -548,9 +548,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set
 #     a breakpoint at main().
-gdb-config: 
+gdb-config:
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -648,14 +648,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
 	@echo
 	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
 
 
 # Compile: create assembler files from C source files.
@@ -677,7 +677,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 
 
 # Target: clean project.
@@ -721,3 +721,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 debug gdb-config
+