Update makefiles to use the latest WinAVR/Atmel toolchain makefile template.

Add new module source variables to the library core makefile, so that module sources can be added to a project's makefile on a per-module rather than per-file basis.

1 files changed, 65 insertions, 83 deletions

diff --git a/Projects/RelayBoard/makefile b/Projects/RelayBoard/makefile
index 7c0df3e6b..6f3d08efd 100644
--- a/Projects/RelayBoard/makefile
+++ b/Projects/RelayBoard/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
-# make debug = Start either simulavr or avarice as specified for debugging,
+# make debug = Start either simulavr or avarice as specified for debugging, 
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -60,18 +60,18 @@
 
 
 # MCU name
-MCU = at90usb1286
+MCU = at90usb1287
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = TEENSY
+BOARD  = USBKEY
 
 
 # Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the
-#     processor frequency in Hz. You can then use this symbol in your source code to
+#     This will define a symbol, F_CPU, in all source code files equal to the 
+#     processor frequency in Hz. You can then use this symbol in your source code to 
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
@@ -80,11 +80,11 @@ BOARD  = TEENSY
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 16000000
+F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the
+#     This will define a symbol, F_CLOCK, in all source code files equal to the 
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -115,33 +115,27 @@ OBJDIR = .
 LUFA_PATH = ../..
 
 
-# LUFA library compile-time options
+# LUFA library compile-time options and predefined tokens
 LUFA_OPTS  = -D USB_DEVICE_ONLY
 LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=8
-LUFA_OPTS += -D CONTROL_ONLY_DEVICE
 LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
+LUFA_OPTS += -D CONTROL_ONLY_DEVICE
 LUFA_OPTS += -D USE_FLASH_DESCRIPTORS
 LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
 
 
+# Create the LUFA source path variables by including the LUFA root makefile
+include $(LUFA_PATH)/LUFA/makefile
+
+
 # List C source files here. (C dependencies are automatically generated.)
 SRC = $(TARGET).c                                                 \
 	  Descriptors.c                                               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/DevChapter9.c        \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Device.c             \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Endpoint.c           \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Host.c               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/HostChapter9.c       \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/LowLevel.c           \
- 	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/Pipe.c               \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/LowLevel/USBInterrupt.c       \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/ConfigDescriptor.c  \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/Events.c            \
-	  $(LUFA_PATH)/LUFA/Drivers/USB/HighLevel/USBTask.c           \
+	  $(LUFA_SRC_USB)
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC =
+CPPSRC = 
 
 
 # List Assembler source files here.
@@ -154,7 +148,7 @@ CPPSRC =
 ASRC =
 
 
-# Optimization level, can be [0, 1, 2, 3, s].
+# Optimization level, can be [0, 1, 2, 3, s]. 
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -183,14 +177,23 @@ CSTANDARD = -std=c99
 
 
 # Place -D or -U options here for C sources
-CDEFS  = -DF_CPU=$(F_CPU)UL -DF_CLOCK=$(F_CLOCK)UL -DBOARD=BOARD_$(BOARD) $(LUFA_OPTS)
+CDEFS  = -DF_CPU=$(F_CPU)UL
+CDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CDEFS += -DBOARD=BOARD_$(BOARD)
+CDEFS += $(LUFA_OPTS)
 
-# Place -D or -U options here for ASM sources
-ADEFS = -DF_CPU=$(F_CPU)
 
+# Place -D or -U options here for ASM sources
+ADEFS  = -DF_CPU=$(F_CPU)
+ADEFS += -DF_CLOCK=$(F_CLOCK)UL
+ADEFS += -DBOARD=BOARD_$(BOARD)
+ADEFS += $(LUFA_OPTS)
 
 # Place -D or -U options here for C++ sources
-CPPDEFS = -DF_CPU=$(F_CPU)UL
+CPPDEFS  = -DF_CPU=$(F_CPU)UL
+CPPDEFS += -DF_CLOCK=$(F_CLOCK)UL
+CPPDEFS += -DBOARD=BOARD_$(BOARD)
+CPPDEFS += $(LUFA_OPTS)
 #CPPDEFS += -D__STDC_LIMIT_MACROS
 #CPPDEFS += -D__STDC_CONSTANT_MACROS
 
@@ -215,8 +218,9 @@ CFLAGS += -fshort-enums
 CFLAGS += -fno-strict-aliasing
 CFLAGS += -Wall
 CFLAGS += -Wstrict-prototypes
-CFLAGS += -Wundef
+#CFLAGS += -mshort-calls
 #CFLAGS += -fno-unit-at-a-time
+#CFLAGS += -Wundef
 #CFLAGS += -Wunreachable-code
 #CFLAGS += -Wsign-compare
 CFLAGS += -Wa,-adhlns=$(<:%.c=$(OBJDIR)/%.lst)
@@ -240,7 +244,7 @@ CPPFLAGS += -fpack-struct
 CPPFLAGS += -fshort-enums
 CPPFLAGS += -fno-exceptions
 CPPFLAGS += -Wall
-CFLAGS += -Wundef
+CPPFLAGS += -Wundef
 #CPPFLAGS += -mshort-calls
 #CPPFLAGS += -fno-unit-at-a-time
 #CPPFLAGS += -Wstrict-prototypes
@@ -258,7 +262,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
@@ -271,7 +275,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB =
+PRINTF_LIB = 
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -283,7 +287,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB =
+SCANF_LIB = 
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -295,7 +299,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS =
+EXTRALIBDIRS = 
 
 
 
@@ -317,8 +321,8 @@ EXTMEMOPTS =
 #  -Wl,...:     tell GCC to pass this to linker.
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
-LDFLAGS = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax
+LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
+LDFLAGS += -Wl,--relax 
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -329,9 +333,7 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
 
 #---------------- Programming Options (avrdude) ----------------
 
-# Programming hardware: alf avr910 avrisp bascom bsd
-# dt006 pavr picoweb pony-stk200 sp12 stk200 stk500
-#
+# Programming hardware
 # Type: avrdude -c ?
 # to get a full listing.
 #
@@ -354,7 +356,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
@@ -388,7 +390,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when
+#     just set to localhost unless doing some sort of crazy debugging when 
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -411,12 +413,13 @@ REMOVEDIR = rm -rf
 COPY = cp
 WINSHELL = cmd
 
+
 # Define Messages
 # English
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before:
+MSG_SIZE_BEFORE = Size before: 
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -435,10 +438,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
 
 
 # Compiler flags to generate dependency files.
@@ -456,7 +459,7 @@ ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS)
 
 
 # Default target.
-all: begin gccversion sizebefore build showliboptions showtarget sizeafter end
+all: begin gccversion sizebefore build sizeafter end
 
 # Change the build target to build a HEX file or a library.
 build: elf hex eep lss sym
@@ -487,9 +490,7 @@ end:
 
 # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex
-ELFSIZE = $(SIZE) $(MCU_FLAG) $(FORMAT_FLAG) $(TARGET).elf
-MCU_FLAG = $(shell $(SIZE) --help | grep -- --mcu > /dev/null && echo --mcu=$(MCU) )
-FORMAT_FLAG = $(shell $(SIZE) --help | grep -- --format=.*avr > /dev/null && echo --format=avr )
+ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf
 
 sizebefore:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \
@@ -499,29 +500,14 @@ sizeafter:
 	@if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \
 	2>/dev/null; echo; fi
 
-showliboptions:
-	@echo
-	@echo ---- Compile Time Library Options ----
-	@for i in $(LUFA_OPTS:-D%=%); do \
-		echo $$i; \
-	done
-	@echo --------------------------------------
-
-showtarget:
-	@echo
-	@echo --------- Target Information ---------
-	@echo AVR Model: $(MCU)
-	@echo Board:     $(BOARD)
-	@echo Clock:     $(F_CPU)Hz CPU, $(F_CLOCK)Hz Master
-	@echo --------------------------------------
 
 
 # Display compiler version information.
-gccversion :
+gccversion : 
 	@$(CC) --version
 
 
-# Program the device.
+# Program the device.  
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
@@ -548,9 +534,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set
+#     define the reset signal, load the target file, connect to target, and set 
 #     a breakpoint at main().
-gdb-config:
+gdb-config: 
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -604,7 +590,7 @@ extcoff: $(TARGET).elf
 %.hex: %.elf
 	@echo
 	@echo $(MSG_FLASH) $@
-	$(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
+	$(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock $< $@
 
 %.eep: %.elf
 	@echo
@@ -616,7 +602,7 @@ extcoff: $(TARGET).elf
 %.lss: %.elf
 	@echo
 	@echo $(MSG_EXTENDED_LISTING) $@
-	$(OBJDUMP) -h -z -S $< > $@
+	$(OBJDUMP) -h -S -z $< > $@
 
 # Create a symbol table from ELF output file.
 %.sym: %.elf
@@ -648,14 +634,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@
+	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
 	@echo
 	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
 
 
 # Compile: create assembler files from C source files.
@@ -677,19 +663,17 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
 
 
 # Target: clean project.
-clean: begin clean_list clean_binary end
+clean: begin clean_list end
 
-clean_binary:
-	$(REMOVE) $(TARGET).hex
-	
-clean_list:
+clean_list :
+	@echo
 	@echo $(MSG_CLEANING)
+	$(REMOVE) $(TARGET).hex
 	$(REMOVE) $(TARGET).eep
-	$(REMOVE) $(TARGET)eep.hex
 	$(REMOVE) $(TARGET).cof
 	$(REMOVE) $(TARGET).elf
 	$(REMOVE) $(TARGET).map
@@ -700,7 +684,6 @@ clean_list:
 	$(REMOVE) $(SRC:.c=.s)
 	$(REMOVE) $(SRC:.c=.d)
 	$(REMOVE) $(SRC:.c=.i)
-	$(REMOVE) InvalidEvents.tmp
 	$(REMOVEDIR) .dep
 
 doxygen:
@@ -720,8 +703,7 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 
 
 # Listing of phony targets.
-.PHONY : all showliboptions showtarget begin       \
-finish end sizebefore sizeafter gccversion build   \
-elf hex eep lss sym coff extcoff program dfu flip  \
-flip-ee dfu-ee clean debug clean_list clean_binary \
-clean_doxygen gdb-config doxygen
\ No newline at end of file
+.PHONY : all begin finish end sizebefore sizeafter gccversion \
+build elf hex eep lss sym coff extcoff doxygen clean          \
+clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
+debug gdb-config