Partial Commit: Move AVRISP project out of the Projects\Incomplete directory.

1 files changed, 0 insertions, 92 deletions

diff --git a/Projects/Incomplete/AVRISP/AVRISP.txt b/Projects/Incomplete/AVRISP/AVRISP.txt
deleted file mode 100644
index e26cfb11e..000000000
--- a/Projects/Incomplete/AVRISP/AVRISP.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \mainpage AVRISP MKII Programmer Project

- *

- *  \section SSec_Compat Demo Compatibility:

- *

- *  The following table indicates what microcontrollers are compatible with this demo.

- *

- *  - AT90USB1287

- *  - AT90USB1286

- *  - AT90USB647

- *  - AT90USB646

- *  - ATMEGA32U6

- *  - ATMEGA32U4

- *  - ATMEGA16U4

- *  - AT90USB162

- *  - AT90USB82

- *

- *  \section SSec_Info USB Information:

- *

- *  The following table gives a rundown of the USB utilization of this demo.

- *

- * <table>

- *  <tr>

- *   <td><b>USB Mode:</b></td>

- *   <td>Device</td>

- *  </tr>

- *  <tr>

- *   <td><b>USB Class:</b></td>

- *   <td>Vendor Specific Class</td>

- *  </tr>

- *  <tr> 

- *   <td><b>USB Subclass:</b></td>

- *   <td>N/A</td>

- *  </tr>

- *  <tr>

- *   <td><b>Relevant Standards:</b></td>

- *   <td>Atmel AVRISP MKII Protocol Specification</td>

- *  </tr>

- *  <tr>

- *   <td><b>Usable Speeds:</b></td>

- *   <td>Full Speed Mode</td>

- *  </tr>

- * </table>

- *

- *  \section SSec_Description Project Description: 

- *

- *  Firmware for an AVRStudio compatible AVRISP-MKII clone programmer. This project will enable the USB AVR series of

- *  microcontrollers to act as a clone of the official Atmel AVRISP-MKII programmer, usable within AVRStudio. In its

- *  most basic form, it allows for the programming of 5V AVRs from within AVRStudio with no special hardware other than

- *  the USB AVR and the parts needed for the USB interface. If the user desires, more advanced circuits incorporating

- *  level conversion can be made to allow for the programming of 3.3V AVR designs.

- *

- *  This device spoofs Atmel's official AVRISP-MKII device PID so that it remains compatible with Atmel's AVRISP-MKII

- *  drivers. When promted, direct your OS to install Atmel's AVRISP-MKII drivers provided with AVRStudio.

- *

- *  Note that this design currently has several limitations:

- *    - Minimum target clock speed of 500KHz due to hardware SPI used

- *    - No VTARGET detection and notification

- *    - No reversed/shorted target connector detection and notification

- *

- *  \section SSec_Options Project Options

- *

- *  The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.

- *

- *  <table>

- *   <tr>

- *    <td><b>Define Name:</b></td>

- *    <td><b>Location:</b></td>

- *    <td><b>Description:</b></td>

- *   </tr>

- *   <tr>

- *    <td>RESET_LINE_PORT</td>

- *    <td>Makefile CDEFS</td>

- *    <td>PORT register for the programmer's target RESET line.</td>

- *   </tr>

- *   <tr>

- *    <td>RESET_LINE_DDR</td>

- *    <td>Makefile CDEFS</td>

- *    <td>DDR register for the programmer's target RESET line.</td>

- *   </tr>

- *   <tr>

- *    <td>RESET_LINE_MASK</td>

- *    <td>Makefile CDEFS</td>

- *    <td>Mask for the programmer's target RESET line on the chosen port.</td>

- *   </tr>

- *  </table>

- */