Merge in AppConfigHeaders branch to trunk, altering all projects and demos to use configuration headers for application and LUFA compile time settings, rather than defines in the project makefiles.

13 files changed, 196 insertions, 55 deletions

diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.h b/Projects/AVRISP-MKII/AVRISP-MKII.h
index 87cfacef0..8f0fabcca 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.h
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.h
@@ -42,7 +42,6 @@
 		#include <avr/interrupt.h>
 		#include <avr/power.h>
 
-		#include <LUFA/Version.h>
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
 
@@ -52,6 +51,7 @@
 
 		#include "AVRISPDescriptors.h"
 		#include "Lib/V2Protocol.h"
+		#include "Config/AppConfig.h"
 
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt
index 44ed1e4c3..2cf8ceb47 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.txt
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt
@@ -214,60 +214,60 @@
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_PORT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
  *        but is generally used for the target's /RESET line.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_PIN</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
  *        but is generally used for the target's /RESET line.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_DDR</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
  *        but is generally used for the target's /RESET line.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_MASK</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
  *        but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_ADC_CHANNEL</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
  *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
  *   </tr>
  *   <tr>
  *    <td>ENABLE_ISP_PROTOCOL</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to enable SPI programming protocol support.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>ENABLE_XPROG_PROTOCOL</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to enable PDI and TPI programming protocol support.
  *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>NO_VTARGET_DETECT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
  *        to report a fixed 3.3V target voltage to the host regardless of the real target voltage. 
  *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_REF_VOLTS</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
  *        voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
  *        to the ADC.
@@ -275,14 +275,14 @@
  *   </tr>
  *   <tr>
  *    <td>VTARGET_USE_INTERNAL_REF</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will
  *        override the VTARGET_REF_VOLTS configuration option.
  *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_SCALE_FACTOR</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
  *        ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
  *        measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
@@ -291,7 +291,7 @@
  *   </tr>
  *   <tr>
  *    <td>LIBUSB_DRIVER_COMPAT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to switch to a non-standard endpoint scheme, breaking compatibility with AVRStudio under Windows but making
  *        the code compatible with software such as avrdude (all platforms) that use the libUSB driver.
  *
@@ -299,7 +299,7 @@
  *   </tr>
  *   <tr>
  *    <td>RESET_TOGGLES_LIBUSB_COMPAT</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to make the /RESET line of the AVR toggle between Jungo and libUSB driver compatibility modes. Each time the AVR is
  *        reset externally via the reset pin, the compatibility mode will be toggled. The compatibility mode is preserved between
  *        power cycles and is not toggled via other forms of reset such as Watchdog or Brown Out.
@@ -311,19 +311,19 @@
  *   </tr>
  *   <tr>
  *    <td>XCK_RESCUE_CLOCK_ENABLE</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming
  *        hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td>
  *   </tr>
  *   <tr>
  *    <td>INVERTED_ISP_MISO</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to invert the received data on the ISP MISO line. This is sometimes needed depending on the level translation hardware used,
  *        if the translator hardware inverts the received logic level.</td>
  *   </tr>
  *   <tr>
  *    <td>FIRMWARE_VERSION_MINOR</td>
- *    <td>Makefile LUFA_OPTS</td>
+ *    <td>AppConfig.h</td>
  *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
  *        with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
  *   </tr>
diff --git a/Projects/AVRISP-MKII/Config/AppConfig.h b/Projects/AVRISP-MKII/Config/AppConfig.h
new file mode 100644
index 000000000..26198e3d7
--- /dev/null
+++ b/Projects/AVRISP-MKII/Config/AppConfig.h
@@ -0,0 +1,66 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Application Configuration Header File
+ *
+ *  This is a header file which is be used to configure some of
+ *  the application's compile time options, as an alternative to
+ *  specifying the compile time constants supplied through a 
+ *  makefile or build system.
+ *
+ *  For information on what each token does, refer to the 
+ *  \ref Sec_Options section of the application documentation.
+ */
+
+#ifndef _APP_CONFIG_H_
+#define _APP_CONFIG_H_
+
+	#define AUX_LINE_PORT              PORTB
+	#define AUX_LINE_PIN               PINB
+	#define AUX_LINE_DDR               DDRB
+	#define AUX_LINE_MASK              (1 << 4)
+
+	#define ENABLE_ISP_PROTOCOL
+	#define ENABLE_XPROG_PROTOCOL
+
+	#define VTARGET_ADC_CHANNEL        2
+	#define VTARGET_REF_VOLTS          5
+	#define VTARGET_SCALE_FACTOR       1
+//	#define VTARGET_USE_INTERNAL_REF
+//	#define NO_VTARGET_DETECT
+//	#define XCK_RESCUE_CLOCK_ENABLE
+//	#define INVERTED_ISP_MISO
+
+//	#define LIBUSB_DRIVER_COMPAT
+//	#define RESET_TOGGLES_LIBUSB_COMPAT
+//	#define FIRMWARE_VERSION_MINOR     0x11
+
+#endif
\ No newline at end of file
diff --git a/Projects/AVRISP-MKII/Config/LUFAConfig.h b/Projects/AVRISP-MKII/Config/LUFAConfig.h
new file mode 100644
index 000000000..2071bfdd1
--- /dev/null
+++ b/Projects/AVRISP-MKII/Config/LUFAConfig.h
@@ -0,0 +1,93 @@
+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2012.
+
+  dean [at] fourwalledcubicle [dot] com
+           www.lufa-lib.org
+*/
+
+/*
+  Copyright 2012  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief LUFA Library Configuration Header File
+ *
+ *  This header file is used to configure LUFA's compile time options,
+ *  as an alternative to the compile time constants supplied through
+ *  a makefile.
+ *
+ *  For information on what each token does, refer to the LUFA
+ *  manual section "Summary of Compile Tokens".
+ */
+
+#ifndef _LUFA_CONFIG_H_
+#define _LUFA_CONFIG_H_
+
+	#if (ARCH == ARCH_AVR8)
+
+		/* Non-USB Related Configuration Tokens: */
+//		#define DISABLE_TERMINAL_CODES
+
+		/* USB Class Driver Related Tokens: */
+//		#define HID_HOST_BOOT_PROTOCOL_ONLY
+//		#define HID_STATETABLE_STACK_DEPTH       {Insert Value Here}
+//		#define HID_USAGE_STACK_DEPTH            {Insert Value Here}
+//		#define HID_MAX_COLLECTIONS              {Insert Value Here}
+//		#define HID_MAX_REPORTITEMS              {Insert Value Here}
+//		#define HID_MAX_REPORT_IDS               {Insert Value Here}
+//		#define NO_CLASS_DRIVER_AUTOFLUSH
+
+		/* General USB Driver Related Tokens: */
+		#define ORDERED_EP_CONFIG
+		#define USE_STATIC_OPTIONS               (USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)
+		#define USB_DEVICE_ONLY
+//		#define USB_HOST_ONLY
+//		#define USB_STREAM_TIMEOUT_MS            {Insert Value Here}
+//		#define NO_LIMITED_CONTROLLER_CONNECT
+		#define NO_SOF_EVENTS
+
+		/* USB Device Mode Driver Related Tokens: */
+//		#define USE_RAM_DESCRIPTORS
+//		#define USE_FLASH_DESCRIPTORS
+//		#define USE_EEPROM_DESCRIPTORS
+		#define NO_INTERNAL_SERIAL
+		#define FIXED_CONTROL_ENDPOINT_SIZE      16
+		#define DEVICE_STATE_AS_GPIOR            0
+		#define FIXED_NUM_CONFIGURATIONS         1
+//		#define CONTROL_ONLY_DEVICE
+//		#define INTERRUPT_CONTROL_ENDPOINT
+		#define NO_DEVICE_REMOTE_WAKEUP
+		#define NO_DEVICE_SELF_POWER
+
+		/* USB Host Mode Driver Related Tokens: */
+//		#define HOST_STATE_AS_GPIOR              {Insert Value Here}
+//		#define USB_HOST_TIMEOUT_MS              {Insert Value Here}
+//		#define HOST_DEVICE_SETTLE_DELAY_MS	     {Insert Value Here}
+//      #define NO_AUTO_VBUS_MANAGEMENT
+//      #define INVERTED_VBUS_ENABLE_LINE
+
+	#else
+
+		#error Unsupported architecture for this LUFA configuration file.
+
+	#endif
+#endif
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
index 4ad526390..7f65e46b4 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.h
@@ -43,7 +43,8 @@
 		#include <LUFA/Drivers/USB/USB.h>
 
 		#include "../V2Protocol.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
index 9124b1a6b..4c0ea8245 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
@@ -44,8 +44,10 @@
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/Peripheral/SPI.h>
 
-		#include "../V2ProtocolParams.h"
-
+		#include "../V2Protocol.h"
+		#include "ISPProtocol.h"
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/Lib/V2Protocol.h b/Projects/AVRISP-MKII/Lib/V2Protocol.h
index a730aa296..ae69efffd 100644
--- a/Projects/AVRISP-MKII/Lib/V2Protocol.h
+++ b/Projects/AVRISP-MKII/Lib/V2Protocol.h
@@ -48,7 +48,8 @@
 		#include "V2ProtocolParams.h"
 		#include "ISP/ISPProtocol.h"
 		#include "XPROG/XPROGProtocol.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
index ab47664d3..53cad8ded 100644
--- a/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
+++ b/Projects/AVRISP-MKII/Lib/V2ProtocolParams.h
@@ -40,8 +40,6 @@
 		#include <avr/io.h>
 		#include <avr/eeprom.h>
 
-		#include <LUFA/Version.h>
-
 		#if defined(ADC)
 			#include <LUFA/Drivers/Peripheral/ADC.h>
 		#endif
@@ -49,7 +47,8 @@
 		#include "V2Protocol.h"
 		#include "V2ProtocolConstants.h"
 		#include "ISP/ISPTarget.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Macros: */
 		/** Parameter privilege mask to allow the host PC to read the parameter's value. */
 		#define PARAM_PRIV_READ     (1 << 0)
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
index c028321b0..696e5f5b8 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/TINYNVM.h
@@ -45,7 +45,8 @@
 
 		#include "XPROGProtocol.h"
 		#include "XPROGTarget.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
index a8704df3c..2789d0217 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XMEGANVM.h
@@ -45,7 +45,8 @@
 
 		#include "XPROGProtocol.h"
 		#include "XPROGTarget.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
index 605653588..2d99d5656 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.h
@@ -46,7 +46,8 @@
 		#include "../V2Protocol.h"
 		#include "XMEGANVM.h"
 		#include "TINYNVM.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			/* On the XPLAIN board, we only need PDI programming
diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
index 09c6ee587..2df1e38a1 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGTarget.h
@@ -45,7 +45,8 @@
 
 		#include "../V2Protocol.h"
 		#include "XPROGProtocol.h"
-
+		#include "Config/AppConfig.h"
+		
 	/* Preprocessor Checks: */
 		#if ((BOARD == BOARD_XPLAIN) || (BOARD == BOARD_XPLAIN_REV1))
 			#undef ENABLE_ISP_PROTOCOL
diff --git a/Projects/AVRISP-MKII/makefile b/Projects/AVRISP-MKII/makefile
index a336ebd26..c54f4ec74 100644
--- a/Projects/AVRISP-MKII/makefile
+++ b/Projects/AVRISP-MKII/makefile
@@ -120,32 +120,7 @@ LUFA_PATH = ../..
 
 
 # LUFA library compile-time options and predefined tokens
-LUFA_OPTS  = -D USB_DEVICE_ONLY
-LUFA_OPTS += -D DEVICE_STATE_AS_GPIOR=0
-LUFA_OPTS += -D ORDERED_EP_CONFIG
-LUFA_OPTS += -D FIXED_CONTROL_ENDPOINT_SIZE=16
-LUFA_OPTS += -D FIXED_NUM_CONFIGURATIONS=1
-LUFA_OPTS += -D USE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
-LUFA_OPTS += -D NO_INTERNAL_SERIAL
-LUFA_OPTS += -D NO_DEVICE_REMOTE_WAKEUP
-LUFA_OPTS += -D NO_DEVICE_SELF_POWER
-
-LUFA_OPTS += -D AUX_LINE_PORT=PORTB
-LUFA_OPTS += -D AUX_LINE_PIN=PINB
-LUFA_OPTS += -D AUX_LINE_DDR=DDRB
-LUFA_OPTS += -D AUX_LINE_MASK="(1 << 4)"
-LUFA_OPTS += -D ENABLE_ISP_PROTOCOL
-LUFA_OPTS += -D ENABLE_XPROG_PROTOCOL
-LUFA_OPTS += -D VTARGET_ADC_CHANNEL=2
-LUFA_OPTS += -D VTARGET_REF_VOLTS=5
-LUFA_OPTS += -D VTARGET_SCALE_FACTOR=1
-#LUFA_OPTS += -D VTARGET_USE_INTERNAL_REF
-#LUFA_OPTS += -D NO_VTARGET_DETECT
-#LUFA_OPTS += -D LIBUSB_DRIVER_COMPAT
-#LUFA_OPTS += -D RESET_TOGGLES_LIBUSB_COMPAT
-#LUFA_OPTS += -D XCK_RESCUE_CLOCK_ENABLE
-#LUFA_OPTS += -D INVERTED_ISP_MISO
-#LUFA_OPTS += -D FIRMWARE_VERSION_MINOR=0x11
+LUFA_OPTS  = -D USE_LUFA_CONFIG_HEADER
 
 
 # Create the LUFA source path variables by including the LUFA root makefile
@@ -197,7 +172,7 @@ DEBUG = dwarf-2
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRAINCDIRS = $(LUFA_PATH)/
+EXTRAINCDIRS = $(LUFA_PATH)/ Config/
 
 
 # Compiler flag to set the C Standard level.