Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

1 files changed, 53 insertions, 52 deletions

diff --git a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
index 85820fd31..edd362b48 100644
--- a/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/XPROG/XPROGProtocol.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -61,18 +61,18 @@ void XPROGProtocol_SetMode(void)
 	{
 		uint8_t Protocol;
 	} SetMode_XPROG_Params;
-	
+
 	Endpoint_Read_Stream_LE(&SetMode_XPROG_Params, sizeof(SetMode_XPROG_Params), NO_STREAM_CALLBACK);
 
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-	
+
 	XPROG_SelectedProtocol = SetMode_XPROG_Params.Protocol;
-	
+
 	Endpoint_Write_Byte(CMD_XPROG_SETMODE);
 	Endpoint_Write_Byte((SetMode_XPROG_Params.Protocol != XPRG_PROTOCOL_JTAG) ? STATUS_CMD_OK : STATUS_CMD_FAILED);
-	Endpoint_ClearIN();	
+	Endpoint_ClearIN();
 }
 
 /** Handler for the CMD_XPROG command, which wraps up XPROG commands in a V2 wrapper which need to be
@@ -81,7 +81,7 @@ void XPROGProtocol_SetMode(void)
 void XPROGProtocol_Command(void)
 {
 	uint8_t XPROGCommand = Endpoint_Read_Byte();
-	
+
 	switch (XPROGCommand)
 	{
 		case XPRG_CMD_ENTER_PROGMODE:
@@ -114,7 +114,7 @@ static void XPROGProtocol_EnterXPROGMode(void)
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-	
+
 	bool NVMBusEnabled = false;
 
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
@@ -123,11 +123,11 @@ static void XPROGProtocol_EnterXPROGMode(void)
 		XPROGTarget_EnableTargetPDI();
 
 		/* Store the RESET key into the RESET PDI register to keep the XMEGA in reset */
-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
+		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
 		XPROGTarget_SendByte(PDI_RESET_KEY);
 
 		/* Lower direction change guard time to 0 USART bits */
-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);	
+		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_CTRL_REG);
 		XPROGTarget_SendByte(0x07);
 
 		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
@@ -142,20 +142,20 @@ static void XPROGProtocol_EnterXPROGMode(void)
 	{
 		/* Enable TPI programming mode with the attached target */
 		XPROGTarget_EnableTargetTPI();
-		
+
 		/* Lower direction change guard time to 0 USART bits */
 		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
 		XPROGTarget_SendByte(0x07);
-		
+
 		/* Enable access to the XPROG NVM bus by sending the documented NVM access key to the device */
-		XPROGTarget_SendByte(TPI_CMD_SKEY);	
+		XPROGTarget_SendByte(TPI_CMD_SKEY);
 		for (uint8_t i = sizeof(TPI_NVMENABLE_KEY); i > 0; i--)
 		  XPROGTarget_SendByte(TPI_NVMENABLE_KEY[i - 1]);
 
 		/* Wait until the NVM bus becomes active */
 		NVMBusEnabled = TINYNVM_WaitWhileNVMBusBusy();
 	}
-	
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_ENTER_PROGMODE);
 	Endpoint_Write_Byte(NVMBusEnabled ? XPRG_ERR_OK : XPRG_ERR_FAILED);
@@ -170,17 +170,17 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-	
+
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
 	{
 		XMEGANVM_WaitWhileNVMBusBusy();
 
 		/* Clear the RESET key in the RESET PDI register to allow the XMEGA to run */
-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
+		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
 		XPROGTarget_SendByte(0x00);
 
 		/* Do it twice to make sure it takes affect (silicon bug?) */
-		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);	
+		XPROGTarget_SendByte(PDI_CMD_STCS | PDI_RESET_REG);
 		XPROGTarget_SendByte(0x00);
 
 		XPROGTarget_DisableTargetPDI();
@@ -190,12 +190,12 @@ static void XPROGProtocol_LeaveXPROGMode(void)
 		TINYNVM_WaitWhileNVMBusBusy();
 
 		/* Clear the NVMEN bit in the TPI CONTROL register to disable TPI mode */
-		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);	
+		XPROGTarget_SendByte(TPI_CMD_SSTCS | TPI_CTRL_REG);
 		XPROGTarget_SendByte(0x00);
-	
+
 		XPROGTarget_DisableTargetTPI();
 	}
-	
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_LEAVE_PROGMODE);
 	Endpoint_Write_Byte(XPRG_ERR_OK);
@@ -219,11 +219,11 @@ static void XPROGProtocol_Erase(void)
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-	
+
 	uint8_t EraseCommand;
 
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
-	{	
+	{
 		/* Determine which NVM command to send to the device depending on the memory to erase */
 		switch (Erase_XPROG_Params.MemoryType)
 		{
@@ -255,7 +255,7 @@ static void XPROGProtocol_Erase(void)
 				EraseCommand = XMEGA_NVM_CMD_NOOP;
 				break;
 		}
-		
+
 		/* Erase the target memory, indicate timeout if occurred */
 		if (!(XMEGANVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;
@@ -266,16 +266,16 @@ static void XPROGProtocol_Erase(void)
 		  EraseCommand = TINY_NVM_CMD_CHIPERASE;
 		else
 		  EraseCommand = TINY_NVM_CMD_SECTIONERASE;
-	
+
 		/* Erase the target memory, indicate timeout if occurred */
 		if (!(TINYNVM_EraseMemory(EraseCommand, Erase_XPROG_Params.Address)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;
 	}
-	
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_ERASE);
 	Endpoint_Write_Byte(ReturnStatus);
-	Endpoint_ClearIN();	
+	Endpoint_ClearIN();
 }
 
 /** Handler for the XPROG WRITE_MEMORY command to write to a specific memory space within the attached device. */
@@ -291,7 +291,7 @@ static void XPROGProtocol_WriteMemory(void)
 		uint16_t Length;
 		uint8_t  ProgData[256];
 	} WriteMemory_XPROG_Params;
-	
+
 	Endpoint_Read_Stream_LE(&WriteMemory_XPROG_Params, (sizeof(WriteMemory_XPROG_Params) -
 	                                                    sizeof(WriteMemory_XPROG_Params).ProgData), NO_STREAM_CALLBACK);
 	WriteMemory_XPROG_Params.Address = SwapEndian_32(WriteMemory_XPROG_Params.Address);
@@ -309,7 +309,7 @@ static void XPROGProtocol_WriteMemory(void)
 		uint8_t WriteBuffCommand = XMEGA_NVM_CMD_LOADFLASHPAGEBUFF;
 		uint8_t EraseBuffCommand = XMEGA_NVM_CMD_ERASEFLASHPAGEBUFF;
 		bool    PagedMemory      = true;
-		
+
 		switch (WriteMemory_XPROG_Params.MemoryType)
 		{
 			case XPRG_MEM_TYPE_APPL:
@@ -321,7 +321,7 @@ static void XPROGProtocol_WriteMemory(void)
 			case XPRG_MEM_TYPE_EEPROM:
 				WriteCommand     = XMEGA_NVM_CMD_ERASEWRITEEEPROMPAGE;
 				WriteBuffCommand = XMEGA_NVM_CMD_LOADEEPROMPAGEBUFF;
-				EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;			
+				EraseBuffCommand = XMEGA_NVM_CMD_ERASEEEPROMPAGEBUFF;
 				break;
 			case XPRG_MEM_TYPE_USERSIG:
 				WriteCommand     = XMEGA_NVM_CMD_WRITEUSERSIG;
@@ -335,9 +335,9 @@ static void XPROGProtocol_WriteMemory(void)
 				PagedMemory      = false;
 				break;
 		}
-		
+
 		/* Send the appropriate memory write commands to the device, indicate timeout if occurred */
-		if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand, 
+		if ((PagedMemory && !(XMEGANVM_WritePageMemory(WriteBuffCommand, EraseBuffCommand, WriteCommand,
 													   WriteMemory_XPROG_Params.PageMode, WriteMemory_XPROG_Params.Address,
 													   WriteMemory_XPROG_Params.ProgData, WriteMemory_XPROG_Params.Length))) ||
 		   (!PagedMemory && !(XMEGANVM_WriteByteMemory(WriteCommand, WriteMemory_XPROG_Params.Address,
@@ -355,10 +355,10 @@ static void XPROGProtocol_WriteMemory(void)
 			ReturnStatus = XPRG_ERR_TIMEOUT;
 		}
 	}
-	
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_WRITE_MEM);
-	Endpoint_Write_Byte(ReturnStatus);	
+	Endpoint_Write_Byte(ReturnStatus);
 	Endpoint_ClearIN();
 }
 
@@ -375,7 +375,7 @@ static void XPROGProtocol_ReadMemory(void)
 		uint32_t Address;
 		uint16_t Length;
 	} ReadMemory_XPROG_Params;
-	
+
 	Endpoint_Read_Stream_LE(&ReadMemory_XPROG_Params, sizeof(ReadMemory_XPROG_Params), NO_STREAM_CALLBACK);
 	ReadMemory_XPROG_Params.Address = SwapEndian_32(ReadMemory_XPROG_Params.Address);
 	ReadMemory_XPROG_Params.Length  = SwapEndian_16(ReadMemory_XPROG_Params.Length);
@@ -385,7 +385,7 @@ static void XPROGProtocol_ReadMemory(void)
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
 
 	uint8_t ReadBuffer[256];
-	
+
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
 	{
 		/* Read the PDI target's memory, indicate timeout if occurred */
@@ -402,10 +402,10 @@ static void XPROGProtocol_ReadMemory(void)
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_READ_MEM);
 	Endpoint_Write_Byte(ReturnStatus);
-	
+
 	if (ReturnStatus == XPRG_ERR_OK)
 	  Endpoint_Write_Stream_LE(ReadBuffer, ReadMemory_XPROG_Params.Length, NO_STREAM_CALLBACK);
-	
+
 	Endpoint_ClearIN();
 }
 
@@ -415,18 +415,18 @@ static void XPROGProtocol_ReadMemory(void)
 static void XPROGProtocol_ReadCRC(void)
 {
 	uint8_t ReturnStatus = XPRG_ERR_OK;
-	
+
 	struct
 	{
 		uint8_t CRCType;
 	} ReadCRC_XPROG_Params;
-	
+
 	Endpoint_Read_Stream_LE(&ReadCRC_XPROG_Params, sizeof(ReadCRC_XPROG_Params), NO_STREAM_CALLBACK);
 
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-	
+
 	uint32_t MemoryCRC;
 
 	if (XPROG_SelectedProtocol == XPRG_PROTOCOL_PDI)
@@ -446,7 +446,7 @@ static void XPROGProtocol_ReadCRC(void)
 				CRCCommand = XMEGA_NVM_CMD_FLASHCRC;
 				break;
 		}
-		
+
 		/* Perform and retrieve the memory CRC, indicate timeout if occurred */
 		if (!(XMEGANVM_GetMemoryCRC(CRCCommand, &MemoryCRC)))
 		  ReturnStatus = XPRG_ERR_TIMEOUT;
@@ -456,18 +456,18 @@ static void XPROGProtocol_ReadCRC(void)
 		/* TPI does not support memory CRC */
 		ReturnStatus = XPRG_ERR_FAILED;
 	}
-	
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_CRC);
 	Endpoint_Write_Byte(ReturnStatus);
-	
+
 	if (ReturnStatus == XPRG_ERR_OK)
 	{
 		Endpoint_Write_Byte(MemoryCRC >> 16);
-		Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);		
+		Endpoint_Write_Word_LE(MemoryCRC & 0xFFFF);
 	}
-	
-	Endpoint_ClearIN();	
+
+	Endpoint_ClearIN();
 }
 
 /** Handler for the XPROG SET_PARAM command to set a XPROG parameter for use when communicating with the
@@ -478,7 +478,7 @@ static void XPROGProtocol_SetParam(void)
 	uint8_t ReturnStatus = XPRG_ERR_OK;
 
 	uint8_t XPROGParam = Endpoint_Read_Byte();
-	
+
 	/* Determine which parameter is being set, store the new parameter value */
 	switch (XPROGParam)
 	{
@@ -502,7 +502,7 @@ static void XPROGProtocol_SetParam(void)
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
-		  
+
 	Endpoint_Write_Byte(CMD_XPROG);
 	Endpoint_Write_Byte(XPRG_CMD_SET_PARAM);
 	Endpoint_Write_Byte(ReturnStatus);
@@ -510,3 +510,4 @@ static void XPROGProtocol_SetParam(void)
 }
 
 #endif
+