Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.

3 files changed, 10 insertions, 9 deletions

diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
index 797fa3655..7368125f6 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPProtocol.c
@@ -150,7 +150,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 	Endpoint_Read_Stream_LE(&Write_Memory_Params, (sizeof(Write_Memory_Params) -
 	                                               sizeof(Write_Memory_Params.ProgData)), NULL);
 	Write_Memory_Params.BytesToWrite = SwapEndian_16(Write_Memory_Params.BytesToWrite);
-	
+
 	if (Write_Memory_Params.BytesToWrite > sizeof(Write_Memory_Params.ProgData))
 	{
 		Endpoint_ClearOUT();
@@ -236,7 +236,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 			/* Must reset the polling address afterwards, so it is not erroneously used for the next byte */
 			PollAddress = 0;
 		}
-		
+
 		/* EEPROM just increments the address each byte, flash needs to increment on each word and
 		 * also check to ensure that a LOAD EXTENDED ADDRESS command is issued each time the extended
 		 * address boundary has been crossed during FLASH memory programming */
@@ -248,7 +248,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 			  MustLoadExtendedAddress = true;
 		}
 	}
-	
+
 	/* If the current page must be committed, send the PROGRAM PAGE command to the target */
 	if (Write_Memory_Params.ProgrammingMode & PROG_MODE_COMMIT_PAGE_MASK)
 	{
@@ -271,7 +271,7 @@ void ISPProtocol_ProgramMemory(uint8_t V2Command)
 		/* Check to see if the FLASH address has crossed the extended address boundary */
 		if ((V2Command == CMD_PROGRAM_FLASH_ISP) && !(CurrentAddress & 0xFFFF))
 		  MustLoadExtendedAddress = true;
-	}	
+	}
 
 	Endpoint_Write_8(V2Command);
 	Endpoint_Write_8(ProgrammingStatus);
@@ -293,7 +293,7 @@ void ISPProtocol_ReadMemory(uint8_t V2Command)
 
 	Endpoint_Read_Stream_LE(&Read_Memory_Params, sizeof(Read_Memory_Params), NULL);
 	Read_Memory_Params.BytesToRead = SwapEndian_16(Read_Memory_Params.BytesToRead);
-	
+
 	Endpoint_ClearOUT();
 	Endpoint_SelectEndpoint(AVRISP_DATA_IN_EPNUM);
 	Endpoint_SetEndpointDirection(ENDPOINT_DIR_IN);
@@ -526,3 +526,4 @@ void ISPProtocol_DelayMS(uint8_t DelayMS)
 }
 
 #endif
+
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
index a6ec53600..04bfcb5f8 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.c
@@ -178,7 +178,7 @@ void ISPTarget_DisableTargetISP(void)
 	{
 		DDRB  &= ~((1 << 1) | (1 << 2));
 		PORTB &= ~((1 << 0) | (1 << 3));
-		
+
 		/* Must re-enable rescue clock once software ISP has exited, as the timer for the rescue clock is
 		 * re-purposed for software SPI */
 		ISPTarget_ConfigureRescueClock();
@@ -195,7 +195,7 @@ void ISPTarget_ConfigureRescueClock(void)
 	#if defined(XCK_RESCUE_CLOCK_ENABLE)
 		/* Configure XCK as an output for the specified AVR model */
 		DDRD  |= (1 << 5);
-		
+
 		/* Start USART to generate a 4MHz clock on the XCK pin */
 		UBRR1  = ((F_CPU / 2 / ISP_RESCUE_CLOCK_SPEED) - 1);
 		UCSR1B = (1 << TXEN1);
diff --git a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
index 350283f5e..d8ace7a7d 100644
--- a/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
+++ b/Projects/AVRISP-MKII/Lib/ISP/ISPTarget.h
@@ -113,7 +113,7 @@
 			if (HardwareSPIMode)
 			  return ~SPI_ReceiveByte();
 			else
-			  return ~ISPTarget_TransferSoftSPIByte(0x00);			
+			  return ~ISPTarget_TransferSoftSPIByte(0x00);
 			#endif
 		}
 
@@ -135,7 +135,7 @@
 			if (HardwareSPIMode)
 			  return ~SPI_TransferByte(Byte);
 			else
-			  return ~ISPTarget_TransferSoftSPIByte(Byte);		
+			  return ~ISPTarget_TransferSoftSPIByte(Byte);
 			#endif
 		}