Rename the AVRISP main source files to AVRISP-MKII so that it matches the project name. Add AVRStudio project file for the AVRISP-MKII project.

1 files changed, 0 insertions, 130 deletions

diff --git a/Projects/AVRISP-MKII/AVRISP.c b/Projects/AVRISP-MKII/AVRISP.c
deleted file mode 100644
index 33ea07b52..000000000
--- a/Projects/AVRISP-MKII/AVRISP.c
+++ /dev/null
@@ -1,130 +0,0 @@
-/*
-             LUFA Library
-     Copyright (C) Dean Camera, 2010.
-              
-  dean [at] fourwalledcubicle [dot] com
-      www.fourwalledcubicle.com
-*/
-
-/*
-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
-
-  Permission to use, copy, modify, distribute, and sell this 
-  software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
-  all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
-  software without specific, written prior permission.
-
-  The author disclaim all warranties with regard to this
-  software, including all implied warranties of merchantability
-  and fitness.  In no event shall the author be liable for any
-  special, indirect or consequential damages or any damages
-  whatsoever resulting from loss of use, data or profits, whether
-  in an action of contract, negligence or other tortious action,
-  arising out of or in connection with the use or performance of
-  this software.
-*/
-
-/** \file
- *
- *  Main source file for the AVRISP project. This file contains the main tasks of
- *  the project and is responsible for the initial application hardware configuration.
- */
-
-#include "AVRISP.h"
-
-/** Main program entry point. This routine contains the overall program flow, including initial
- *  setup of all components and the main program loop.
- */
-int main(void)
-{
-	SetupHardware();
-	V2Protocol_Init();
-	
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-	sei();
-
-	for (;;)
-	{
-		AVRISP_Task();
-		USB_USBTask();
-	}
-}
-
-/** Configures the board hardware and chip peripherals for the demo's functionality. */
-void SetupHardware(void)
-{
-	/* Disable watchdog if enabled by bootloader/fuses */
-	MCUSR &= ~(1 << WDRF);
-	wdt_disable();
-
-	/* Disable clock division */
-	clock_prescale_set(clock_div_1);
-
-	/* Hardware Initialization */
-	LEDs_Init();
-	USB_Init();
-}
-
-/** Event handler for the library USB Connection event. */
-void EVENT_USB_Device_Connect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-}
-
-/** Event handler for the library USB Disconnection event. */
-void EVENT_USB_Device_Disconnect(void)
-{
-	LEDs_SetAllLEDs(LEDMASK_USB_NOTREADY);
-}
-
-/** Event handler for the library USB Configuration Changed event. */
-void EVENT_USB_Device_ConfigurationChanged(void)
-{
-	/* Indicate USB connected and ready */
-	LEDs_SetAllLEDs(LEDMASK_USB_READY);
-
-	/* Setup AVRISP data Endpoints */
-	if (!(Endpoint_ConfigureEndpoint(AVRISP_DATA_OUT_EPNUM, EP_TYPE_BULK,
-	                                 ENDPOINT_DIR_OUT, AVRISP_DATA_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-
-	#if defined(LIBUSB_DRIVER_COMPAT)
-	if (!(Endpoint_ConfigureEndpoint(AVRISP_DATA_IN_EPNUM, EP_TYPE_BULK,
-	                                 ENDPOINT_DIR_IN, AVRISP_DATA_EPSIZE,
-	                                 ENDPOINT_BANK_SINGLE)))
-	{
-		LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
-	}
-	#endif
-}
-
-/** Processes incoming V2 Protocol commands from the host, returning a response when required. */
-void AVRISP_Task(void)
-{
-	/* Device must be connected and configured for the task to run */
-	if (USB_DeviceState != DEVICE_STATE_Configured)
-	  return;
-
-	V2Params_UpdateParamValues();
-
-	Endpoint_SelectEndpoint(AVRISP_DATA_OUT_EPNUM);
-	
-	/* Check to see if a V2 Protocol command has been received */
-	if (Endpoint_IsOUTReceived())
-	{
-		LEDs_SetAllLEDs(LEDMASK_BUSY);
-
-		/* Pass off processing of the V2 Protocol command to the V2 Protocol handler */
-		V2Protocol_ProcessCommand();
-
-		LEDs_SetAllLEDs(LEDMASK_USB_READY);
-	}
-}
-