Minor documentation fixes.

Make an explicit constant name for the CMDEX bit of the target's NVM command register in the AVRISP-MKII Clone project.

1 files changed, 23 insertions, 15 deletions

diff --git a/Projects/AVRISP-MKII/AVRISP-MKII.txt b/Projects/AVRISP-MKII/AVRISP-MKII.txt
index d2977dde9..a6f00b4a3 100644
--- a/Projects/AVRISP-MKII/AVRISP-MKII.txt
+++ b/Projects/AVRISP-MKII/AVRISP-MKII.txt
@@ -215,63 +215,69 @@
  *    <td>AUX_LINE_PORT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>PORT register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ *        but is generally used for the target's /RESET line.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_PIN</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>PIN register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ *        but is generally used for the target's /RESET line.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_DDR</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>DDR register for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ *        but is generally used for the target's /RESET line.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>AUX_LINE_MASK</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Mask for the programmer's AUX target line. The use of this line varies between the programming protocols,
- *        but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>. <i>Ignored when
- *        compiled for the XPLAIN board.</i></td>
+ *        but is generally used for the target's /RESET line. <b>Must not be the AVR's /SS pin</b>.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_ADC_CHANNEL</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>ADC channel number (on supported AVRs) to use for VTARGET level detection, if NO_VTARGET_DETECT is not defined.
- *        <i>Ignored when compiled for targets lacking an ADC.</i></td>
+ *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
  *   </tr>
  *   <tr>
  *    <td>ENABLE_ISP_PROTOCOL</td>
  *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to enable SPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ *    <td>Define to enable SPI programming protocol support.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>ENABLE_XPROG_PROTOCOL</td>
  *    <td>Makefile LUFA_OPTS</td>
- *    <td>Define to enable PDI and TPI programming protocol support. <i>Ignored when compiled for the XPLAIN board.</i></td>
+ *    <td>Define to enable PDI and TPI programming protocol support.
+ *        \n \n <i>Ignored when compiled for the XPLAIN board.</i></td>
  *   </tr>
  *   <tr>
  *    <td>NO_VTARGET_DETECT</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to disable VTARGET sampling and reporting on AVR models with an ADC converter. This will cause the programmer
- *        to report a fixed 3.3V target voltage to the host regardless of the real target voltage. <i>Ignored when compiled for
- *        targets lacking an ADC.</i></td>
+ *        to report a fixed 3.3V target voltage to the host regardless of the real target voltage. 
+ *        \n \n <i>Ignored when compiled for targets lacking an ADC.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_REF_VOLTS</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Indicates the programmer AVR's AVCC reference voltage when measuring the target's supply voltage. Note that the supply
  *        voltage should never exceed the reference voltage on the programmer AVR without some form of protection to prevent damage
- *        to the ADC. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
+ *        to the ADC.
+ *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_USE_INTERNAL_REF</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Selects the internal 2.56V ADC reference voltage, instead of using the AVR's VREF pin. When enabled, this option will
- *        override the VTARGET_REF_VOLTS configuration option. <i>Ignored when compiled for targets lacking an ADC, or when
- *        NO_VTARGET_DETECT is defined.</i></td>
+ *        override the VTARGET_REF_VOLTS configuration option.
+ *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
  *   </tr>
  *   <tr>
  *    <td>VTARGET_SCALE_FACTOR</td>
@@ -279,7 +285,8 @@
  *    <td>Indicates the target's supply voltage scale factor when applied to the ADC. A simple resistive divider can be used on the
  *        ADC pin for measuring the target's supply voltage, so that voltages above the programmer AVR's AVCC reference voltage can be
  *        measured. This should be the reciprocal of the division performed - e.g. if the VTARGET voltage is halved, this should be set
- *        to 2. <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
+ *        to 2.
+ *        \n \n <i>Ignored when compiled for targets lacking an ADC, or when NO_VTARGET_DETECT is defined.</i></td>
  *   </tr>
  *   <tr>
  *    <td>LIBUSB_DRIVER_COMPAT</td>
@@ -291,7 +298,7 @@
  *    <td>XCK_RESCUE_CLOCK_ENABLE</td>
  *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to move the ISP rescue clock to the AVR's XCK pin instead of the OCR1A output pin. This is useful for existing programming
- *        hardware that does not expose the OCR1A pin of the AVR, but *may* cause some issues with PDI programming mode.</td>
+ *        hardware that does not expose the OCR1A pin of the AVR, but <i>may</i> cause some issues with PDI programming mode.</td>
  *   </tr>
  *   <tr>
  *    <td>INVERTED_ISP_MISO</td>
@@ -301,6 +308,7 @@
  *   </tr>
  *   <tr>
  *    <td>FIRMWARE_VERSION_MINOR</td>
+ *    <td>Makefile LUFA_OPTS</td>
  *    <td>Define to set the minor firmware revision nunber reported to the host on request. By default this will use a firmware version compatible
  *        with the latest Atmel IDE version, however if desired the reported minor value can be adjusted here.</td>
  *   </tr>