Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 26 insertions, 26 deletions

diff --git a/LUFA/ManPages/ProgrammingApps.txt b/LUFA/ManPages/ProgrammingApps.txt
index 4302170ec..4f3107502 100644
--- a/LUFA/ManPages/ProgrammingApps.txt
+++ b/LUFA/ManPages/ProgrammingApps.txt
@@ -1,27 +1,27 @@
-/** \file

- *

- *  This file contains special DoxyGen information for the generation of the main page and other special

- *  documentation pages. It is not a project source file.

- */

- 

-/** \page Page_ProgrammingApps Programming an Application into a USB AVR

- *

- *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your

- *  application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the

- *  reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the

- *  supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer,

- *  a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website.

- *

- *  Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel

- *  DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the

- *  AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.

- *  Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased

- *  or broken without an external programming device. They have disadvantages however; they cannot change the fuses of

- *  the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the

- *  AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the

- *  loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs).

- *

- *  If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.

- *  Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)

- *  alternative exists called "dfu-programmer".

+/** \file
+ *
+ *  This file contains special DoxyGen information for the generation of the main page and other special
+ *  documentation pages. It is not a project source file.
+ */
+ 
+/** \page Page_ProgrammingApps Programming an Application into a USB AVR
+ *
+ *  Once you have built an application, you will need a way to program in the resulting ".HEX" file (and, if your
+ *  application uses EEPROM variables with initial values, also a ".EEP" file) into your USB AVR. Normally, the
+ *  reprogramming of an AVR device must be performed using a special piece of programming hardware, through one of the
+ *  supported AVR programming protocols - ISP, HVSP, HVPP, JTAG or dW. This can be done through a custom programmer,
+ *  a third party programmer, or an official Atmel AVR tool - for more information, see the Atmel.com website.
+ *
+ *  Alternatively, you can use the bootloader. From the Atmel factory, each USB AVR comes preloaded with the Atmel
+ *  DFU (Device Firmware Update) class bootloader, a small piece of AVR firmware which allows the remainder of the
+ *  AVR to be programmed through a non-standard interface such as the serial USART port, SPI, or (in this case) USB.
+ *  Bootloaders have the advantage of not requiring any special hardware for programming, and cannot usually be erased
+ *  or broken without an external programming device. They have disadvantages however; they cannot change the fuses of
+ *  the AVR (special configuration settings that control the operation of the chip itself) and a small portion of the
+ *  AVR's FLASH program memory must be reserved to contain the bootloader firmware, and thus cannot be used by the
+ *  loaded application. Atmel's DFU bootloader is either 4KB (for the smaller USB AVRs) or 8KB (for the larger USB AVRs).
+ *
+ *  If you wish to use the DFU bootloader to program in your application, refer to your DFU programmer's documentation.
+ *  Atmel provides a free utility called FLIP which is USB AVR compatible, and an open source (Linux compatible)
+ *  alternative exists called "dfu-programmer".
  */
\ No newline at end of file