Documentation improvements - put driver example code into its own section, fix incorrect and missing section names.

45 files changed, 97 insertions, 58 deletions

diff --git a/LUFA/Drivers/Board/Buttons.h b/LUFA/Drivers/Board/Buttons.h
index e112683a8..27a2f3c22 100644
--- a/LUFA/Drivers/Board/Buttons.h
+++ b/LUFA/Drivers/Board/Buttons.h
@@ -50,7 +50,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Hardware buttons driver. This provides an easy to use driver for the hardware buttons present on many boards.
  *  It provides a way to easily configure and check the status of all the buttons on the board so that appropriate
  *  actions can be taken.
@@ -60,7 +60,10 @@
  *
  *  For possible BOARD makefile values, see \ref Group_BoardTypes.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the button driver before first use
  *      Buttons_Init();
diff --git a/LUFA/Drivers/Board/Dataflash.h b/LUFA/Drivers/Board/Dataflash.h
index d443c8f5a..45654c000 100644
--- a/LUFA/Drivers/Board/Dataflash.h
+++ b/LUFA/Drivers/Board/Dataflash.h
@@ -50,7 +50,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Dataflash driver. This module provides an easy to use interface for the Dataflash ICs located on many boards,
  *  for the storage of large amounts of data into the Dataflash's non-volatile memory.
  *
@@ -59,7 +59,10 @@
  *
  *  For possible BOARD makefile values, see \ref Group_BoardTypes.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the SPI and board Dataflash drivers before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
diff --git a/LUFA/Drivers/Board/Joystick.h b/LUFA/Drivers/Board/Joystick.h
index f3c5c9d26..81be0ea3f 100644
--- a/LUFA/Drivers/Board/Joystick.h
+++ b/LUFA/Drivers/Board/Joystick.h
@@ -50,7 +50,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Hardware Joystick driver. This module provides an easy to use interface to control the hardware digital Joystick
  *  located on many boards.
  *
@@ -59,7 +59,10 @@
  *
  *  For possible BOARD makefile values, see \ref Group_BoardTypes.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the board Joystick driver before first use
  *      Joystick_Init();
diff --git a/LUFA/Drivers/Board/LEDs.h b/LUFA/Drivers/Board/LEDs.h
index b05d55cf8..8cd3037a3 100644
--- a/LUFA/Drivers/Board/LEDs.h
+++ b/LUFA/Drivers/Board/LEDs.h
@@ -50,7 +50,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Hardware LEDs driver. This provides an easy to use driver for the hardware LEDs present on many boards. It
  *  provides an interface to configure, test and change the status of all the board LEDs.
  *
@@ -68,7 +68,10 @@
  *        compatible code for a board with no LEDs by making a board LED driver (see \ref Page_WritingBoardDrivers)
  *        which contains only stub functions and defines no LEDs.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the board LED driver before first use
  *      LEDs_Init();
diff --git a/LUFA/Drivers/Board/Temperature.h b/LUFA/Drivers/Board/Temperature.h
index c8b36f586..fa86ccd24 100644
--- a/LUFA/Drivers/Board/Temperature.h
+++ b/LUFA/Drivers/Board/Temperature.h
@@ -41,13 +41,16 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/Board/Temperature.c <i>(Makefile source module name: LUFA_SRC_TEMPERATURE)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Temperature sensor driver. This provides an easy to use interface for the hardware temperature sensor located
  *  on many boards. It provides an interface to configure the sensor and appropriate ADC channel, plus read out the
  *  current temperature in degrees C. It is designed for and will only work with the temperature sensor located on the
  *  official Atmel USB AVR boards, as each sensor has different characteristics.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the ADC and board temperature sensor drivers before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_128);
diff --git a/LUFA/Drivers/Misc/RingBuffer.h b/LUFA/Drivers/Misc/RingBuffer.h
index af6a69f83..3af5d8e44 100644
--- a/LUFA/Drivers/Misc/RingBuffer.h
+++ b/LUFA/Drivers/Misc/RingBuffer.h
@@ -47,7 +47,7 @@
  *  The following files must be built with any user project that uses this module:

  *    - None

  *

- *  \section Module Description

+ *  \section Sec_ModDescription Module Description

  *  Lightweight ring buffer, for fast insertion/deletion. Multiple buffers can be created of

  *  different sizes to suit different needs.

  *

@@ -56,7 +56,10 @@
  *  or deletions) must not overlap. If there is possibility of two or more of the same kind of

  *  operating occuring at the same point in time, atomic (mutex) locking should be used.

  *

- *  <b>Example Usage:</b>

+ *  \section Sec_ExampleUsage Example Usage

+ *  The following snippet is an example of how this module may be used within a typical

+ *  application.

+ *

  *  \code

  *      // Create the buffer structure and its underlying storage array

  *      RingBuff_t Buffer;

diff --git a/LUFA/Drivers/Misc/TerminalCodes.h b/LUFA/Drivers/Misc/TerminalCodes.h
index e1cba1674..0b82613d3 100644
--- a/LUFA/Drivers/Misc/TerminalCodes.h
+++ b/LUFA/Drivers/Misc/TerminalCodes.h
@@ -42,16 +42,22 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Escape code macros for ANSI compliant text terminals.
  *
  *  \note If desired, the macro DISABLE_TERMINAL_CODES can be defined in the project makefile and passed to the GCC
  *        compiler via the -D switch to disable the terminal codes without modifying the source, for use with non
  *        compatible terminals (any terminal codes then equate to empty strings).
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
- *      printf("Some String, " ESC_BOLD_ON " Some bold string");
+ *      printf("Normal String, "
+ *             ESC_BOLD_ON "Bold String, "
+ *             ESC_UNDERLINE_ON "Bold and Underlined String"
+ *             ESC_RESET ESC_FG_BLUE ESC_BG_YELLOW "Normal Blue-on-Yellow String");
  *  \endcode
  *
  *  @{
diff --git a/LUFA/Drivers/Peripheral/ADC.h b/LUFA/Drivers/Peripheral/ADC.h
index 0fba2d10e..79d2e89b1 100644
--- a/LUFA/Drivers/Peripheral/ADC.h
+++ b/LUFA/Drivers/Peripheral/ADC.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Hardware ADC driver. This module provides an easy to use driver for the hardware
  *  ADC present on many AVR models, for the conversion of analogue signals into the
  *  digital domain.
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
index 3e736864c..8f3210a6c 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/ADC.h
@@ -47,7 +47,10 @@
  *  \note This file should not be included directly. It is automatically included as needed by the ADC driver
  *        dispatch header located in LUFA/Drivers/Peripheral/ADC.h.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the ADC driver before first use
  *      ADC_Init(ADC_FREE_RUNNING | ADC_PRESCALE_32);
diff --git a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
index c6fb42009..634ecc986 100644
--- a/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
+++ b/LUFA/Drivers/Peripheral/AVRU4U6U7/TWI.h
@@ -45,7 +45,10 @@
  *  \note This file should not be included directly. It is automatically included as needed by the TWI driver
  *        dispatch header located in LUFA/Drivers/Peripheral/TWI.h.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the TWI driver before first use
  *      TWI_Init();
diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h
index ff45bc3ae..f22b6d99a 100644
--- a/LUFA/Drivers/Peripheral/SPI.h
+++ b/LUFA/Drivers/Peripheral/SPI.h
@@ -41,11 +41,14 @@
  *  The following files must be built with any user project that uses this module:
  *    - None
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Driver for the hardware SPI port available on most AVR models. This module provides
  *  an easy to use driver for the setup of and transfer of data over the AVR's SPI port.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the SPI driver before first use
  *      SPI_Init(SPI_SPEED_FCPU_DIV_2 | SPI_ORDER_MSB_FIRST | SPI_SCK_LEAD_FALLING |
diff --git a/LUFA/Drivers/Peripheral/Serial.h b/LUFA/Drivers/Peripheral/Serial.h
index f40201de5..549448d92 100644
--- a/LUFA/Drivers/Peripheral/Serial.h
+++ b/LUFA/Drivers/Peripheral/Serial.h
@@ -41,11 +41,14 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/Peripheral/Serial.c <i>(Makefile source module name: LUFA_SRC_SERIAL)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Hardware serial USART driver. This module provides an easy to use driver for
  *  the setup of and transfer of data over the AVR's USART port.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the serial USART driver before first use, with 9600 baud (and no double-speed mode)
  *      Serial_Init(9600, false);
diff --git a/LUFA/Drivers/Peripheral/SerialStream.h b/LUFA/Drivers/Peripheral/SerialStream.h
index bef52ac9e..3ea165066 100644
--- a/LUFA/Drivers/Peripheral/SerialStream.h
+++ b/LUFA/Drivers/Peripheral/SerialStream.h
@@ -44,13 +44,16 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/Peripheral/SerialStream.c <i>(Makefile source module name: LUFA_SRC_SERIALSTREAM)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Serial stream driver for the USART subsystem on supported USB AVRs. This makes use of the functions in the
  *  regular USART driver (see \ref Group_Serial), but allows the avr-libc standard stream functions (printf,
  *  puts, etc.) to work with the USART. Upon configuration, this will redirect the standard input and output
  *  streams to the USART.
  *
- *  <b>Example Usage:</b>
+ *  \section Sec_ExampleUsage Example Usage
+ *  The following snippet is an example of how this module may be used within a typical
+ *  application.
+ *
  *  \code
  *      // Initialise the Serial Stream driver before first use, with 9600 baud (and no double-speed mode)
  *      SerialStream_Init(9600, false);
diff --git a/LUFA/Drivers/Peripheral/TWI.h b/LUFA/Drivers/Peripheral/TWI.h
index e8cc834c8..5c2223e41 100644
--- a/LUFA/Drivers/Peripheral/TWI.h
+++ b/LUFA/Drivers/Peripheral/TWI.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/Peripheral/TWI.c <i>(Makefile source module name: LUFA_SRC_TWI)</i>
  *
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Master Mode Hardware TWI driver. This module provides an easy to use driver for the hardware
  *  TWI present on many AVR models, for the transmission and reception of data on a TWI bus.
  *
diff --git a/LUFA/Drivers/USB/Class/Audio.h b/LUFA/Drivers/USB/Class/Audio.h
index a33e98ed3..8ea5662dc 100644
--- a/LUFA/Drivers/USB/Class/Audio.h
+++ b/LUFA/Drivers/USB/Class/Audio.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/Audio.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Audio Class Driver module. This module contains an internal implementation of the USB Audio 1.0 Class, for Device
  *  USB mode only. User applications can use this class driver instead of implementing the Audio class manually via
  *  the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/CDC.h b/LUFA/Drivers/USB/Class/CDC.h
index 12aaf9362..fe45c2a22 100644
--- a/LUFA/Drivers/USB/Class/CDC.h
+++ b/LUFA/Drivers/USB/Class/CDC.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/USB/Class/Device/CDC.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/CDC.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  CDC Class Driver module. This module contains an internal implementation of the USB CDC-ACM class Virtual Serial
  *  Ports, for both Device and Host USB modes. User applications can use this class driver instead of implementing the
  *  CDC class manually via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/Common/Audio.h b/LUFA/Drivers/USB/Class/Common/Audio.h
index c10e499ad..db3b10d9b 100644
--- a/LUFA/Drivers/USB/Class/Common/Audio.h
+++ b/LUFA/Drivers/USB/Class/Common/Audio.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassAudio
  *  @defgroup Group_USBClassAudioCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  Audio 1.0 Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/CDC.h b/LUFA/Drivers/USB/Class/Common/CDC.h
index aaaf12144..3c9cee20f 100644
--- a/LUFA/Drivers/USB/Class/Common/CDC.h
+++ b/LUFA/Drivers/USB/Class/Common/CDC.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassCDC
  *  @defgroup Group_USBClassCDCCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  CDC Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/HID.h b/LUFA/Drivers/USB/Class/Common/HID.h
index 024158aa3..017eb8249 100644
--- a/LUFA/Drivers/USB/Class/Common/HID.h
+++ b/LUFA/Drivers/USB/Class/Common/HID.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassHID
  *  @defgroup Group_USBClassHIDCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  HID Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/MIDI.h b/LUFA/Drivers/USB/Class/Common/MIDI.h
index efab81820..fe43fe5ca 100644
--- a/LUFA/Drivers/USB/Class/Common/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Common/MIDI.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassMIDI
  *  @defgroup Group_USBClassMIDICommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  MIDI Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/MassStorage.h b/LUFA/Drivers/USB/Class/Common/MassStorage.h
index 1e0c4546d..f7e31198b 100644
--- a/LUFA/Drivers/USB/Class/Common/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/Common/MassStorage.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassMS
  *  @defgroup Group_USBClassMSCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  Mass Storage Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/Printer.h b/LUFA/Drivers/USB/Class/Common/Printer.h
index 20a862daa..3a75183d4 100644
--- a/LUFA/Drivers/USB/Class/Common/Printer.h
+++ b/LUFA/Drivers/USB/Class/Common/Printer.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassPrinter
  *  @defgroup Group_USBClassPrinterCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  Printer Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/RNDIS.h b/LUFA/Drivers/USB/Class/Common/RNDIS.h
index 79aae7f89..ead305153 100644
--- a/LUFA/Drivers/USB/Class/Common/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Common/RNDIS.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassRNDIS
  *  @defgroup Group_USBClassRNDISCommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  RNDIS Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Common/StillImage.h b/LUFA/Drivers/USB/Class/Common/StillImage.h
index c836b9137..64f5dd6fa 100644
--- a/LUFA/Drivers/USB/Class/Common/StillImage.h
+++ b/LUFA/Drivers/USB/Class/Common/StillImage.h
@@ -40,7 +40,7 @@
 /** \ingroup Group_USBClassSI
  *  @defgroup Group_USBClassSICommon  Common Class Definitions
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Constants, Types and Enum definitions that are common to both Device and Host modes for the USB
  *  Still Image Class.
  *
diff --git a/LUFA/Drivers/USB/Class/Device/Audio.h b/LUFA/Drivers/USB/Class/Device/Audio.h
index 429b899c6..85e37e1c6 100644
--- a/LUFA/Drivers/USB/Class/Device/Audio.h
+++ b/LUFA/Drivers/USB/Class/Device/Audio.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/Audio.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the Audio 1.0 USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Device/CDC.h b/LUFA/Drivers/USB/Class/Device/CDC.h
index caea6ebc7..00ff8802c 100644
--- a/LUFA/Drivers/USB/Class/Device/CDC.h
+++ b/LUFA/Drivers/USB/Class/Device/CDC.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/CDC.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the CDC USB Class driver.
  *
  *  \note There are several major drawbacks to the CDC-ACM standard USB class, however
diff --git a/LUFA/Drivers/USB/Class/Device/HID.h b/LUFA/Drivers/USB/Class/Device/HID.h
index b9baf2900..07ffc2522 100644
--- a/LUFA/Drivers/USB/Class/Device/HID.h
+++ b/LUFA/Drivers/USB/Class/Device/HID.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/HID.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the HID USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Device/MIDI.h b/LUFA/Drivers/USB/Class/Device/MIDI.h
index 4f72d5c93..6b93cb0e7 100644
--- a/LUFA/Drivers/USB/Class/Device/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Device/MIDI.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/MIDI.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the MIDI USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Device/MassStorage.h b/LUFA/Drivers/USB/Class/Device/MassStorage.h
index 57b145e38..ba7654692 100644
--- a/LUFA/Drivers/USB/Class/Device/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/Device/MassStorage.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Device/RNDIS.h b/LUFA/Drivers/USB/Class/Device/RNDIS.h
index 292c51b77..66bb43c61 100644
--- a/LUFA/Drivers/USB/Class/Device/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Device/RNDIS.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Device/RNDIS.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Device Mode USB Class driver framework interface, for the RNDIS USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/HID.h b/LUFA/Drivers/USB/Class/HID.h
index a01370e57..91c0090b8 100644
--- a/LUFA/Drivers/USB/Class/HID.h
+++ b/LUFA/Drivers/USB/Class/HID.h
@@ -46,7 +46,7 @@
  *    - LUFA/Drivers/USB/Class/Host/HID.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  HID Class Driver module. This module contains an internal implementation of the USB HID Class, for both Device
  *  and Host USB modes. User applications can use this class driver instead of implementing the HID class manually
  *  via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/Host/CDC.h b/LUFA/Drivers/USB/Class/Host/CDC.h
index 016f4a5d1..2aa46de1b 100644
--- a/LUFA/Drivers/USB/Class/Host/CDC.h
+++ b/LUFA/Drivers/USB/Class/Host/CDC.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/CDC.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the CDC USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Host/HID.h b/LUFA/Drivers/USB/Class/Host/HID.h
index d1392c94b..f00cdc943 100644
--- a/LUFA/Drivers/USB/Class/Host/HID.h
+++ b/LUFA/Drivers/USB/Class/Host/HID.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/USB/Class/Host/HID.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the HID USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Host/HIDParser.h b/LUFA/Drivers/USB/Class/Host/HIDParser.h
index df259591d..5ec2b55fa 100644
--- a/LUFA/Drivers/USB/Class/Host/HIDParser.h
+++ b/LUFA/Drivers/USB/Class/Host/HIDParser.h
@@ -43,7 +43,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/HIDParser.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Functions, macros, variables, enums and types related to the parsing of HID class device report descriptors.
  *
  *  The processed HID report is presented back to the user application as a flat structure containing each report
diff --git a/LUFA/Drivers/USB/Class/Host/MIDI.h b/LUFA/Drivers/USB/Class/Host/MIDI.h
index 7ac4ab7c4..f0b4a27a2 100644
--- a/LUFA/Drivers/USB/Class/Host/MIDI.h
+++ b/LUFA/Drivers/USB/Class/Host/MIDI.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/MIDI.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the MIDI USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Host/MassStorage.h b/LUFA/Drivers/USB/Class/Host/MassStorage.h
index 5779a4721..4a4ae7809 100644
--- a/LUFA/Drivers/USB/Class/Host/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/Host/MassStorage.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the Mass Storage USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Host/Printer.h b/LUFA/Drivers/USB/Class/Host/Printer.h
index 99df01fa4..bc41bafda 100644
--- a/LUFA/Drivers/USB/Class/Host/Printer.h
+++ b/LUFA/Drivers/USB/Class/Host/Printer.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/Printer.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the Printer USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/Host/RNDIS.h b/LUFA/Drivers/USB/Class/Host/RNDIS.h
index 6eaf131ea..32d4e585e 100644
--- a/LUFA/Drivers/USB/Class/Host/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/Host/RNDIS.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/RNDIS.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the Microsoft RNDIS Ethernet
  *  USB Class driver.
  *
diff --git a/LUFA/Drivers/USB/Class/Host/StillImage.h b/LUFA/Drivers/USB/Class/Host/StillImage.h
index 39ab65ddf..3bbf71000 100644
--- a/LUFA/Drivers/USB/Class/Host/StillImage.h
+++ b/LUFA/Drivers/USB/Class/Host/StillImage.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/StillImage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Host Mode USB Class driver framework interface, for the Still Image USB Class driver.
  *
  *  @{
diff --git a/LUFA/Drivers/USB/Class/MIDI.h b/LUFA/Drivers/USB/Class/MIDI.h
index 9d00e2b0c..f3062a1b0 100644
--- a/LUFA/Drivers/USB/Class/MIDI.h
+++ b/LUFA/Drivers/USB/Class/MIDI.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/USB/Class/Device/MIDI.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/MIDI.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  MIDI Class Driver module. This module contains an internal implementation of the USB MIDI Class, for both Device
  *  and Host USB modes. User applications can use this class driver instead of implementing the MIDI class manually
  *  via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/MassStorage.h b/LUFA/Drivers/USB/Class/MassStorage.h
index 31b1dac65..5b60dad2a 100644
--- a/LUFA/Drivers/USB/Class/MassStorage.h
+++ b/LUFA/Drivers/USB/Class/MassStorage.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/USB/Class/Device/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/MassStorage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Mass Storage Class Driver module. This module contains an internal implementation of the USB Mass Storage Class, for both
  *  Device and Host USB modes. User applications can use this class driver instead of implementing the Mass Storage class
  *  manually via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/Printer.h b/LUFA/Drivers/USB/Class/Printer.h
index ec10197c5..d933eebc2 100644
--- a/LUFA/Drivers/USB/Class/Printer.h
+++ b/LUFA/Drivers/USB/Class/Printer.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/Printer.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Printer Class Driver module. This module contains an internal implementation of the USB Printer Class, for the base
  *  USB Printer transport layer for USB Host mode only. Note that printers are free to implement whatever printer language
  *  they choose on top of this (e.g. Postscript), and so this driver exposes low level data transport functions only rather
diff --git a/LUFA/Drivers/USB/Class/RNDIS.h b/LUFA/Drivers/USB/Class/RNDIS.h
index 6a0fbe5a5..44f3f6fb6 100644
--- a/LUFA/Drivers/USB/Class/RNDIS.h
+++ b/LUFA/Drivers/USB/Class/RNDIS.h
@@ -45,7 +45,7 @@
  *    - LUFA/Drivers/USB/Class/Device/RNDIS.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *    - LUFA/Drivers/USB/Class/Host/RNDIS.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  RNDIS Class Driver module. This module contains an internal implementation of the Microsoft USB RNDIS Networking
  *  Class, for both Device and Host USB modes. User applications can use this class driver instead of implementing the
  *  RNDIS class manually via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/Class/StillImage.h b/LUFA/Drivers/USB/Class/StillImage.h
index 5d587a95a..5835428d9 100644
--- a/LUFA/Drivers/USB/Class/StillImage.h
+++ b/LUFA/Drivers/USB/Class/StillImage.h
@@ -44,7 +44,7 @@
  *  The following files must be built with any user project that uses this module:
  *    - LUFA/Drivers/USB/Class/Host/StillImage.c <i>(Makefile source module name: LUFA_SRC_USBCLASS)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Still Image Class Driver module. This module contains an internal implementation of the USB Still Image Class,
  *  for USB Host mode only. User applications can use this class driver instead of implementing the Still Image class
  *  manually via the low-level LUFA APIs.
diff --git a/LUFA/Drivers/USB/USB.h b/LUFA/Drivers/USB/USB.h
index fcb74006f..731704ea8 100644
--- a/LUFA/Drivers/USB/USB.h
+++ b/LUFA/Drivers/USB/USB.h
@@ -55,7 +55,7 @@
  *    - LUFA/Drivers/USB/HighLevel/PipeStream.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *    - LUFA/Drivers/USB/HighLevel/USBTask.c <i>(Makefile source module name: LUFA_SRC_USB)</i>
  *
- *  \section Module Description
+ *  \section Sec_ModDescription Module Description
  *  Driver and framework for the USB controller hardware on the USB series of AVR microcontrollers. This module
  *  consists of many submodules, and is designed to provide an easy way to configure and control USB host, device
  *  or OTG mode USB applications.
@@ -139,7 +139,7 @@
  *  slightly differently, and thus will be explained separately. For information on a specific class driver, read
  *  the class driver's module documentation.
  *
- *  \subsection SSec_ClassDriverDevice Device Mode Class Drivers
+ *  \subsection Sec_ClassDriverDevice Device Mode Class Drivers
  *  Implementing a Device Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
  *  the module configuration and state structure must be added to the project source. These structures are named in a
  *  similar manner between classes, that of <i>USB_ClassInfo_<b>{Class Name}</b>_Device_t</i>, and are used to hold the
@@ -238,7 +238,7 @@
  *  read and write routines. See each driver's individual documentation for more information on the
  *  class-specific functions.
  *
- *  \subsection SSec_ClassDriverHost Host Mode Class Drivers
+ *  \subsection Sec_ClassDriverHost Host Mode Class Drivers
  *  Implementing a Host Mode Class Driver in a user application requires a number of steps to be followed. Firstly,
  *  the module configuration and state structure must be added to the project source. These structures are named in a
  *  similar manner between classes, that of <i>USB_ClassInfo_<b>{Class Name}</b>_Host_t</i>, and are used to hold the