Documentation enhancements to improve documentation cross-references.

16 files changed, 220 insertions, 228 deletions

diff --git a/LUFA/Drivers/USB/Class/ConfigDescriptor.h b/LUFA/Drivers/USB/Class/ConfigDescriptor.h
index 362a43e75..da38492ff 100644
--- a/LUFA/Drivers/USB/Class/ConfigDescriptor.h
+++ b/LUFA/Drivers/USB/Class/ConfigDescriptor.h
@@ -118,7 +118,7 @@
 			 *  for certain descriptors matching unique criteria.

 			 *

 			 *  Comparator routines are passed in a single pointer named CurrentDescriptor, and should return a value

-			 *  of a member of the DSearch_Return_ErrorCodes_t enum.

+			 *  of a member of the \ref DSearch_Return_ErrorCodes_t enum.

 			 */

 			#define DESCRIPTOR_COMPARATOR(name)           uint8_t DCOMP_##name (void* const CurrentDescriptor)

 

@@ -137,7 +137,7 @@
 				 *  \param CurrConfigLoc  Pointer to the current position in the configuration descriptor

 				 *  \param ComparatorRoutine  Name of the comparator search function to use on the configuration descriptor

 				 *

-				 *  \return Value of one of the members of the DSearch_Comp_Return_ErrorCodes_t enum

+				 *  \return Value of one of the members of the \ref DSearch_Comp_Return_ErrorCodes_t enum

 				 *

 				 *  Usage Example:

 				 *  \code

@@ -166,7 +166,7 @@
 			#endif

 			

 		/* Enums: */

-			/** Enum for return values of a descriptor comparator made with DESCRIPTOR_COMPARATOR. */

+			/** Enum for return values of a descriptor comparator made with \ref DESCRIPTOR_COMPARATOR. */

 			enum DSearch_Return_ErrorCodes_t

 			{

 				DESCRIPTOR_SEARCH_Found                = 0, /**< Current descriptor matches comparator criteria. */

@@ -174,7 +174,7 @@
 				DESCRIPTOR_SEARCH_NotFound             = 2, /**< Current descriptor does not match comparator criteria. */

 			};

 

-			/** Enum for return values of USB_GetNextDescriptorComp(). */

+			/** Enum for return values of \ref USB_GetNextDescriptorComp(). */

 			enum DSearch_Comp_Return_ErrorCodes_t

 			{

 				DESCRIPTOR_SEARCH_COMP_Found           = 0, /**< Configuration descriptor now points to descriptor which matches

diff --git a/LUFA/Drivers/USB/Class/HIDParser.h b/LUFA/Drivers/USB/Class/HIDParser.h
index f02f1fd09..49e57c295 100644
--- a/LUFA/Drivers/USB/Class/HIDParser.h
+++ b/LUFA/Drivers/USB/Class/HIDParser.h
@@ -114,7 +114,7 @@
 

 	/* Public Interface - May be used in end-application: */

 		/* Enums: */

-			/** Enum for indicating what type of report item an entry in a HID_ReportInfo_t ReportItem array is */

+			/** Enum for indicating what type of report item an entry in a \ref HID_ReportInfo_t ReportItem array is */

 			enum HID_ReportItemTypes_t

 			{

 				REPORT_ITEM_TYPE_In                   = 0, /**< Indicates that the item is an IN report type. */

@@ -122,16 +122,16 @@
 				REPORT_ITEM_TYPE_Feature              = 2, /**< Indicates that the item is a FEATURE report type. */

 			};

 			

-			/** Enum for the possible error codes in the return value of the ProcessHIDReport() function */

+			/** Enum for the possible error codes in the return value of the \ref USB_ProcessHIDReport() function */

 			enum HID_Parse_ErrorCodes_t

 			{

 				HID_PARSE_Successful                  = 0, /**< Successful parse of the HID report descriptor, no error. */

-				HID_PARSE_HIDStackOverflow            = 1, /**< More than HID_STATETABLE_STACK_DEPTH nested PUSHes in the report. */ 

+				HID_PARSE_HIDStackOverflow            = 1, /**< More than \ref HID_STATETABLE_STACK_DEPTH nested PUSHes in the report. */ 

 				HID_PARSE_HIDStackUnderflow           = 2, /**< A POP was found when the state table stack was empty. */

-				HID_PARSE_InsufficientReportItems     = 3, /**< More than HID_MAX_REPORTITEMS report items in the report. */

+				HID_PARSE_InsufficientReportItems     = 3, /**< More than \ref HID_MAX_REPORTITEMS report items in the report. */

 				HID_PARSE_UnexpectedEndCollection     = 4, /**< END COLLECTION found without matching COLLECTION item. */

-				HID_PARSE_InsufficientCollectionPaths = 5, /**< More than HID_MAX_COLLECTIONS collections in the report. */

-				HID_PARSE_UsageStackOverflow          = 6, /**< More than HID_USAGE_STACK_DEPTH usages listed in a row. */

+				HID_PARSE_InsufficientCollectionPaths = 5, /**< More than \ref HID_MAX_COLLECTIONS collections in the report. */

+				HID_PARSE_UsageStackOverflow          = 6, /**< More than \ref HID_USAGE_STACK_DEPTH usages listed in a row. */

 			};

 		

 		/* Type Defines: */		

@@ -162,7 +162,7 @@
 			 */

 			typedef struct CollectionPath

 			{

-				uint8_t                      Type;   /**< Collection type (for example "Generic Desktop"). */

+				uint8_t                      Type;   /**< Collection type (e.g. "Generic Desktop"). */

 				HID_Usage_t                  Usage;  /**< Collection usage. */

 				struct CollectionPath*       Parent; /**< Reference to parent collection, or NULL if root collection. */

 			} HID_CollectionPath_t;

@@ -207,22 +207,22 @@
 			

 		/* Function Prototypes: */

 			/** Function to process a given HID report returned from an attached device, and store it into a given

-			 *  HID_ReportInfo_t structure.

+			 *  \ref HID_ReportInfo_t structure.

 			 *

 			 *  \param ReportData  Buffer containing the device's HID report table

 			 *  \param ReportSize  Size in bytes of the HID report table

-			 *  \param ParserData  Pointer to a HID_ReportInfo_t instance for the parser output

+			 *  \param ParserData  Pointer to a \ref HID_ReportInfo_t instance for the parser output

 			 *

-			 *  \return A value in the HID_Parse_ErrorCodes_t enum

+			 *  \return A value in the \ref HID_Parse_ErrorCodes_t enum

 			 */

 			uint8_t USB_ProcessHIDReport(const uint8_t* ReportData, uint16_t ReportSize, HID_ReportInfo_t* const ParserData)

 			                             ATTR_NON_NULL_PTR_ARG(1, 3);

 

 			/** Extracts the given report item's value out of the given HID report and places it into the Value

-			 *  member of the report item's HID_ReportItem_t structure.

+			 *  member of the report item's \ref HID_ReportItem_t structure.

 			 *

 			 *  \param ReportData  Buffer containing an IN or FEATURE report from an attached device

-			 *  \param ReportItem  Pointer to the report item of interest in a HID_ReportInfo_t ReportItem array

+			 *  \param ReportItem  Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array

 			 *

 			 *  \returns Boolean true if the item to retrieve was located in the given report, false otherwise

 			 */

@@ -230,14 +230,14 @@
 			                              ATTR_NON_NULL_PTR_ARG(1, 2);

 

 			/** Retrieves the given report item's value out of the Value member of the report item's

-			 *  HID_ReportItem_t structure and places it into the correct position in the HID report

+			 *  \ref HID_ReportItem_t structure and places it into the correct position in the HID report

 			 *  buffer. The report buffer is assumed to have the appropriate bits cleared before calling

 			 *  this function (i.e., the buffer should be explicitly cleared before report values are added).

 			 *

 			 *  If the device has multiple HID reports, the report ID is set to the report ID of the given item.

 			 *

 			 *  \param ReportData  Buffer holding the current OUT report data

-			 *  \param ReportItem  Pointer to the report item of interest in a HID_ReportInfo_t ReportItem array

+			 *  \param ReportItem  Pointer to the report item of interest in a \ref HID_ReportInfo_t ReportItem array

 			 */

 			void USB_SetHIDReportItemInfo(uint8_t* ReportData, const HID_ReportItem_t* ReportItem)

 			                              ATTR_NON_NULL_PTR_ARG(1, 2);

diff --git a/LUFA/Drivers/USB/HighLevel/Events.h b/LUFA/Drivers/USB/HighLevel/Events.h
index 73a804c35..317495cc0 100644
--- a/LUFA/Drivers/USB/HighLevel/Events.h
+++ b/LUFA/Drivers/USB/HighLevel/Events.h
@@ -36,7 +36,7 @@
  *  multiple places in the user or library code, which may or may not be inside an ISR, thus each handler

  *  should be written to be as small and fast as possible to prevent possible problems.

  *

- *  Events can be hooked by the user application using the EVENT_HANDLER() and HANDLES_EVENT() macros. If an

+ *  Events can be hooked by the user application using the \ref EVENT_HANDLER() and \ref HANDLES_EVENT() macros. If an

  *  event with no associated handler is fired within the library, it by default fires an internal empty stub

  *  function. This is achieved through the use of the GCC compiler's "alias" attribute.

  *

@@ -82,7 +82,7 @@
 

 			/** Indicates that a given module can raise a given event. This is the equivalent of putting the

 			 *  event function's prototype into the module, but in a cleaner way. Each event which may be

-			 *  fired via the RAISE_EVENT macro in the module should have an accompanying RAISES_EVENT

+			 *  fired via the \ref RAISE_EVENT macro in the module should have an accompanying \ref RAISES_EVENT

 			 *  prototype in the module's header file.

 			 *

 			 *  Usage Examples:

@@ -122,7 +122,7 @@
 			

 			/** Indicates that a given module handles an event. This is the equivalent of putting the

 			 *  event function's prototype into the module, but in a cleaner way. Each event which may be

-			 *  handled via the EVENT_HANDLER macro in the module should have an accompanying HANDLES_EVENT

+			 *  handled via the \ref EVENT_HANDLER macro in the module should have an accompanying \ref HANDLES_EVENT

 			 *  prototype in the module's header file.

 			 *

 			 *  Usage Examples:

@@ -178,7 +178,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.

+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the \ref USB_IsConnected global changed manually.

 			 *

 			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.

 			 */

@@ -196,7 +196,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.

+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the \ref USB_IsConnected global changed manually.

 			 *

 			 *  \see USBTask.h for more information on the USB management task and reducing CPU usage.

 			 */

@@ -205,7 +205,7 @@
 			/** Event for USB device power on failure. This event fires when the USB interface fails to

 			 *  initialize correctly due to a hardware or software fault.

 			 *

-			 *  \param ErrorCode  Error code indicating the failure reason, a value in USB_PowerOnErrorCodes_t

+			 *  \param ErrorCode  Error code indicating the failure reason, a value in \ref USB_PowerOnErrorCodes_t

 			 *                    located in LowLevel.h.

 			 */

 			void USB_PowerOnFail(const uint8_t ErrorCode);

@@ -224,7 +224,7 @@
 			/** Event for USB host error. This event fires when a hardware fault has occurred whilst the USB

 			 *  interface is in host mode.

 			 *

-			 *  \param ErrorCode  Error code indicating the failure reason, a value in USB_Host_ErrorCodes_t

+			 *  \param ErrorCode  Error code indicating the failure reason, a value in \ref USB_Host_ErrorCodes_t

 			 *                    located in Host.h.

 			 *

 			 *  \note This event only exists on USB AVR models which supports host mode.

@@ -236,7 +236,7 @@
 			

 			/** Event for USB device attachment. This event fires when a the USB interface is in host mode, and

 			 *  a USB device has been connected to the USB interface. This is interrupt driven, thus fires before

-			 *  the standard USB_DeviceConnect event and so can be used to programmatically start the USB management

+			 *  the standard \ref USB_Connect event and so can be used to programmatically start the USB management

 			 *  task to reduce CPU consumption.

 			 *

 			 *  \note This event only exists on USB AVR models which supports host mode.

@@ -291,19 +291,13 @@
 			 *  issued to the device which must be handled appropriately. Due to the strict timing requirements

 			 *  on control transfers, interrupts are disabled during control request processing.

 			 *

-			 *  \param bRequest       Request value, indicating what command the host has issued.

-			 *  \param bmRequestType  Mask indicating the request data direction (if any), type and recipient.

-			 *

 			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

 			 *        LowLevel.h documentation).

 			 *

 			 *  \note Requests should be handled in the same manner as described in the USB 2.0 Specification,

-			 *        or appropriate class' specification. In all instances, the library has already read the

-			 *        request bmRequestType and bRequest values out (into the Request and RequestType parameters

-			 *        respectively) so that it can correctly determine if it is able to handle the request

-			 *        internally, or hand off the request to the user application via this event. Other request

-			 *        parameters (wValue, wIndex, wLength, and Data) remain in the control endpoint bank until

-			 *        read out by the user application for processing.

+			 *        or appropriate class specification. In all instances, the library has already read the

+			 *        request SETUP parameters into the \ref USB_ControlRequest structure which should then be used

+			 *        by the application to determine how to handle the issued request.

 			 */

 			void USB_UnhandledControlPacket(void);

 

@@ -311,7 +305,7 @@
 			 *  selected configuration number while in device mode. This event should be hooked in device

 			 *  applications to create the endpoints and configure the device for the selected configuration.

 			 *

-			 *  This event fires after the value of USB_ConfigurationNumber has been changed.

+			 *  This event fires after the value of \ref USB_ConfigurationNumber has been changed.

 			 *

 			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

 			 *        LowLevel.h documentation).

@@ -325,7 +319,7 @@
 			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

 			 *        LowLevel.h documentation).

 			 *

-			 *  \see USB_WakeUp() event for accompanying Wake Up event.

+			 *  \see \ref USB_WakeUp() event for accompanying Wake Up event.

 			 */

 			void USB_Suspend(void);

 

@@ -337,7 +331,7 @@
 			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

 			 *        LowLevel.h documentation).

 			 *

-			 *  \see USB_Suspend() event for accompanying Suspend event.

+			 *  \see \ref USB_Suspend() event for accompanying Suspend event.

 			 */

 			void USB_WakeUp(void);

 

@@ -356,7 +350,7 @@
 			 *  and an error occurs which prevents it from operating normally.

 			 *

 			 *  \param ErrorCode  Error code indicating the source of the error. One of the values in the

-			 *                    USB_Device_ErrorCodes_t enum located in Device.h.

+			 *                    \ref USB_Device_ErrorCodes_t enum located in Device.h.

 			 *

 			 *  \note This event does not exist if the USB_HOST_ONLY token is supplied to the compiler (see

 			 *        LowLevel.h documentation).

diff --git a/LUFA/Drivers/USB/HighLevel/StdDescriptors.h b/LUFA/Drivers/USB/HighLevel/StdDescriptors.h
index 431080b72..caa0fb046 100644
--- a/LUFA/Drivers/USB/HighLevel/StdDescriptors.h
+++ b/LUFA/Drivers/USB/HighLevel/StdDescriptors.h
@@ -90,85 +90,85 @@
 			#define VERSION_BCD(x)                    ((((VERSION_TENS(x) << 4) | VERSION_ONES(x)) << 8) | \

 			                                          ((VERSION_TENTHS(x) << 4) | VERSION_HUNDREDTHS(x)))

 

-			/** String language ID for the English language. Should be used in USB_Descriptor_Language_t descriptors

+			/** String language ID for the English language. Should be used in \ref USB_Descriptor_String_t descriptors

 			 *  to indicate that the English language is supported by the device in its string descriptors.

 			 */

 			#define LANGUAGE_ID_ENG                   0x0409

 

-			/** Can be masked with an endpoint address for a USB_Descriptor_Endpoint_t endpoint descriptor's

+			/** Can be masked with an endpoint address for a \ref USB_Descriptor_Endpoint_t endpoint descriptor's

 			 *  EndpointAddress value to indicate to the host that the endpoint is of the IN direction (i.e, from

 			 *  device to host).

 			 */

 			#define ENDPOINT_DESCRIPTOR_DIR_IN        0x80

 

-			/** Can be masked with an endpoint address for a USB_Descriptor_Endpoint_t endpoint descriptor's

+			/** Can be masked with an endpoint address for a \ref USB_Descriptor_Endpoint_t endpoint descriptor's

 			 *  EndpointAddress value to indicate to the host that the endpoint is of the OUT direction (i.e, from

 			 *  host to device).

 			 */

 			#define ENDPOINT_DESCRIPTOR_DIR_OUT       0x00		

 

-			/** Can be masked with other configuration descriptor attributes for a USB_Descriptor_Configuration_Header_t

+			/** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t

 			 *  descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power

 			 *  from the host's VBUS line.

 			 */

 			#define USB_CONFIG_ATTR_BUSPOWERED        0x80

 

-			/** Can be masked with other configuration descriptor attributes for a USB_Descriptor_Configuration_Header_t

+			/** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t

 			 *  descriptor's ConfigAttributes value to indicate that the specified configuration can draw its power

 			 *  from the device's own power source.

 			 */

 			#define USB_CONFIG_ATTR_SELFPOWERED       0xC0

 

-			/** Can be masked with other configuration descriptor attributes for a USB_Descriptor_Configuration_Header_t

+			/** Can be masked with other configuration descriptor attributes for a \ref USB_Descriptor_Configuration_Header_t

 			 *  descriptor's ConfigAttributes value to indicate that the specified configuration supports the

 			 *  remote wakeup feature of the USB standard, allowing a suspended USB device to wake up the host upon

 			 *  request.

 			 */

 			#define USB_CONFIG_ATTR_REMOTEWAKEUP      0xA0

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is not synchronized.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint attributes.

 			 */

 			#define ENDPOINT_ATTR_NO_SYNC             (0 << 2)

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is asynchronous.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint attributes.

 			 */

 			#define ENDPOINT_ATTR_ASYNC               (1 << 2)

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is adaptive.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint attributes.

 			 */

 			#define ENDPOINT_ATTR_ADAPTIVE            (2 << 2)

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is synchronized.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint attributes.

 			 */

 			#define ENDPOINT_ATTR_SYNC                (3 << 2)

 			

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is used for data transfers.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint usage attributes.

 			 */

 			#define ENDPOINT_USAGE_DATA               (0 << 4)

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is used for feedback.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint usage attributes.

 			 */

 			#define ENDPOINT_USAGE_FEEDBACK           (1 << 4)

 

-			/** Can be masked with other endpoint descriptor attributes for a USB_Descriptor_Endpoint_t descriptor's

+			/** Can be masked with other endpoint descriptor attributes for a \ref USB_Descriptor_Endpoint_t descriptor's

 			 *  Attributes value to indicate that the specified endpoint is used for implicit feedback.

 			 *

 			 *  \see The USB specification for more details on the possible Endpoint usage attributes.

@@ -180,7 +180,7 @@
 

 		/* Events: */

 			#if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)

-				/** This module raises the Device Error event while in device mode, if the USB_GetDescriptor()

+				/** This module raises the Device Error event while in device mode, if the \ref USB_GetDescriptor()

 				 *  routine is not hooked in the user application to properly return descriptors to the library.

 				 *

 				 *  \see Events.h for more information on this event.

@@ -215,7 +215,7 @@
 			{

 				#if defined(USE_NONSTANDARD_DESCRIPTOR_NAMES) || defined(__DOXYGEN__)

 				uint8_t Size; /**< Size of the descriptor, in bytes. */

-				uint8_t Type; /**< Type of the descriptor, either a value in DescriptorTypes_t or a value

+				uint8_t Type; /**< Type of the descriptor, either a value in \ref USB_DescriptorTypes_t or a value

 				               *   given by the specific class.

 				               */

 				#else

@@ -251,7 +251,7 @@
                                                                *   host will request this string via a separate

 			                                                   *   control request for the string descriptor.

 				                                               *

-				                                               *   \note If no string supplied, use NO_DESCRIPTOR.

+				                                               *   \note If no string supplied, use \ref NO_DESCRIPTOR.

 				                                               */

 				uint8_t                 ProductStrIndex; /**< String index for the product name/details.

 				                                          *

@@ -309,7 +309,7 @@
 				                                           */

 				

 				uint8_t                 MaxPowerConsumption; /**< Maximum power consumption of the device while in the

-				                                              *   current configuration, calculated by the USB_CONFIG_POWER_MA()

+				                                              *   current configuration, calculated by the \ref USB_CONFIG_POWER_MA()

 				                                              *   macro.

 				                                              */

 				#else

@@ -364,7 +364,7 @@
 				#endif

 			} USB_Descriptor_Interface_t;

 

-			/** Type define for a standard interface association descriptor.

+			/** Type define for a standard Interface Association descriptor.

 			 *

 			 *  This descriptor has been added as a supplement to the USB2.0 standard, in the ECN located at

 			 *  <a>http://www.usb.org/developers/docs/InterfaceAssociationDescriptor_ecn.pdf</a>. It allows compound

@@ -442,7 +442,7 @@
 			} USB_Descriptor_Endpoint_t;

 

 			/** Type define for a standard string descriptor. Unlike other standard descriptors, the length

-			 *  of the descriptor for placement in the descriptor header must be determined by the USB_STRING_LEN()

+			 *  of the descriptor for placement in the descriptor header must be determined by the \ref USB_STRING_LEN()

 			 *  macro rather than by the size of the descriptor structure, as the length is not fixed.

 			 *

 			 *  This structure should also be used for string index 0, which contains the supported language IDs for

@@ -479,7 +479,7 @@
 		/* Function Prototypes: */

 			/** Function to retrieve a given descriptor's size and memory location from the given descriptor type value,

 			 *  index and language ID. This function MUST be overridden in the user application (added with full, identical  

-			 *  prototype and name except for the ATTR_WEAK attribute) so that the library can call it to retrieve descriptor 

+			 *  prototype and name except for the \ref ATTR_WEAK attribute) so that the library can call it to retrieve descriptor 

 			 *  data.

 			 *

 			 *  \param wValue             The type of the descriptor to retrieve in the upper byte, and the index in the 

@@ -490,7 +490,7 @@
 			 *                            otherwise zero for standard descriptors, or as defined in a class-specific

 			 *                            standards.

 			 *  \param DescriptorAddress  Pointer to the descriptor in memory. This should be set by the routine to

-			 *                            the location of the descriptor, found by the DESCRIPTOR_ADDRESS macro.

+			 *                            the location of the descriptor, found by the \ref DESCRIPTOR_ADDRESS() macro.

 			 *

 			 *  \note By default, the library expects all descriptors to be located in flash memory via the PROGMEM attribute.

 			 *        If descriptors should be located in RAM or EEPROM instead (to speed up access in the case of RAM, or to

@@ -498,7 +498,7 @@
 			 *        USE_EEPROM_DESCRIPTORS tokens may be defined in the project makefile and passed to the compiler by the -D

 			 *        switch.

 			 *

-			 *  \return Size in bytes of the descriptor if it exists, zero or NO_DESCRIPTOR otherwise

+			 *  \return Size in bytes of the descriptor if it exists, zero or \ref NO_DESCRIPTOR otherwise

 			 */

 			uint16_t USB_GetDescriptor(const uint16_t wValue, const uint8_t wIndex, void** const DescriptorAddress)

 									   ATTR_WARN_UNUSED_RESULT ATTR_WEAK ATTR_NON_NULL_PTR_ARG(3);

diff --git a/LUFA/Drivers/USB/HighLevel/StdRequestType.h b/LUFA/Drivers/USB/HighLevel/StdRequestType.h
index 6f214893b..fc626cc0a 100644
--- a/LUFA/Drivers/USB/HighLevel/StdRequestType.h
+++ b/LUFA/Drivers/USB/HighLevel/StdRequestType.h
@@ -66,58 +66,58 @@
 

 			/** Request data direction mask, indicating that the request data will flow from host to device.

 			 *

-			 *  \see CONTROL_REQTYPE_DIRECTION macro.

+			 *  \see \ref CONTROL_REQTYPE_DIRECTION macro.

 			 */

 			#define REQDIR_HOSTTODEVICE        (0 << 7)

 

 			/** Request data direction mask, indicating that the request data will flow from device to host.

 			 *

-			 *  \see CONTROL_REQTYPE_DIRECTION macro.

+			 *  \see \ref CONTROL_REQTYPE_DIRECTION macro.

 			 */

 			#define REQDIR_DEVICETOHOST        (1 << 7)

 

 			/** Request type mask, indicating that the request is a standard request.

 			 *

-			 *  \see CONTROL_REQTYPE_TYPE macro.

+			 *  \see \ref CONTROL_REQTYPE_TYPE macro.

 			 */

 			#define REQTYPE_STANDARD           (0 << 5)

 

 			/** Request type mask, indicating that the request is a class-specific request.

 			 *

-			 *  \see CONTROL_REQTYPE_TYPE macro.

+			 *  \see \ref CONTROL_REQTYPE_TYPE macro.

 			 */

 			#define REQTYPE_CLASS              (1 << 5)

 

 			/** Request type mask, indicating that the request is a vendor specific request.

 			 *

-			 *  \see CONTROL_REQTYPE_TYPE macro.

+			 *  \see \ref CONTROL_REQTYPE_TYPE macro.

 			 */

 			#define REQTYPE_VENDOR             (2 << 5)

 

 			/** Request recipient mask, indicating that the request is to be issued to the device as a whole.

 			 *

-			 *  \see CONTROL_REQTYPE_RECIPIENT macro.

+			 *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.

 			 */

 			#define REQREC_DEVICE              (0 << 0)

 

 			/** Request recipient mask, indicating that the request is to be issued to an interface in the

 			 *  currently selected configuration.

 			 *

-			 *  \see CONTROL_REQTYPE_RECIPIENT macro.

+			 *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.

 			 */

 			#define REQREC_INTERFACE           (1 << 0)

 

 			/** Request recipient mask, indicating that the request is to be issued to an endpoint in the

 			 *  currently selected configuration.

 			 *

-			 *  \see CONTROL_REQTYPE_RECIPIENT macro.

+			 *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.

 			 */

 			#define REQREC_ENDPOINT            (2 << 0)

 

 			/** Request recipient mask, indicating that the request is to be issued to an unspecified element

 			 *  in the currently selected configuration.

 			 *

-			 *  \see CONTROL_REQTYPE_RECIPIENT macro.

+			 *  \see \ref CONTROL_REQTYPE_RECIPIENT macro.

 			 */

 			#define REQREC_OTHER               (3 << 0)

 			

@@ -151,7 +151,7 @@
 

 		/* Enums: */

 			/** Enumeration for the various standard request commands. These commands are applicable when the

-			 *  request type is REQTYPE_STANDARD (with the exception of REQ_GetDescriptor, which is always

+			 *  request type is \ref REQTYPE_STANDARD (with the exception of \ref REQ_GetDescriptor, which is always

 			 *  handled regardless of the request type value).

 			 *

 			 *  \see Chapter 9 of the USB 2.0 Specification.

@@ -160,41 +160,41 @@
 			{

 				REQ_GetStatus           = 0, /**< Implemented in the library for device, endpoint and interface

 				                              *   recipients. Passed to the user application for other recipients

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_ClearFeature        = 1, /**< Implemented in the library for device, endpoint and interface

 				                              *   recipients. Passed to the user application for other recipients

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_SetFeature          = 3, /**< Implemented in the library for device, endpoint and interface

 				                              *   recipients. Passed to the user application for other recipients

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_SetAddress          = 5, /**< Implemented in the library for the device recipient. Passed

 				                              *   to the user application for other recipients via the

-				                              *   USB_UnhandledControlPacket() event when received in

+				                              *   \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_GetDescriptor       = 6, /**< Implemented in the library for all recipients and all request

 				                              *   types. */

 				REQ_SetDescriptor       = 7, /**< Not implemented in the library, passed to the user application

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_GetConfiguration    = 8, /**< Implemented in the library for the device recipient. Passed

 				                              *   to the user application for other recipients via the

-				                              *   USB_UnhandledControlPacket() event when received in

+				                              *   \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_SetConfiguration    = 9, /**< Implemented in the library for the device recipient. Passed

 				                              *   to the user application for other recipients via the

-				                              *   USB_UnhandledControlPacket() event when received in

+				                              *   \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_GetInterface        = 10, /**< Not implemented in the library, passed to the user application

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_SetInterface        = 11, /**< Not implemented in the library, passed to the user application

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 				REQ_SynchFrame          = 12, /**< Not implemented in the library, passed to the user application

-				                              *   via the USB_UnhandledControlPacket() event when received in

+				                              *   via the \ref USB_UnhandledControlPacket() event when received in

 				                              *   device mode. */

 			};

 

diff --git a/LUFA/Drivers/USB/HighLevel/StreamCallbacks.h b/LUFA/Drivers/USB/HighLevel/StreamCallbacks.h
index 5f0b73742..6a18920c3 100644
--- a/LUFA/Drivers/USB/HighLevel/StreamCallbacks.h
+++ b/LUFA/Drivers/USB/HighLevel/StreamCallbacks.h
@@ -47,7 +47,7 @@
 			 *  these functions are used) which allow the user application to abort the transfer when certain

 			 *  arbitrary conditions are met.

 			 *

-			 *  Stream callback functions should return a value from the StreamCallback_Return_ErrorCodes_t

+			 *  Stream callback functions should return a value from the \ref StreamCallback_Return_ErrorCodes_t

 			 *  enum.

 			 *

 			 *  Usage Example (Device Endpoint, but applicable for Host Pipes also):

diff --git a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
index c5b0a8358..ee13f2554 100644
--- a/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
+++ b/LUFA/Drivers/USB/HighLevel/USBInterrupt.h
@@ -70,7 +70,7 @@
 

 			/** Disables the given USB interrupt vector.

 			 *

-			 *  \see USB_INT_Enable()

+			 *  \see \ref USB_INT_Enable()

 			 */

 			#define USB_INT_Disable(int)             MACROS{ USB_INT_GET_EN_REG(int)   &= ~(USB_INT_GET_EN_MASK(int));  }MACROE

 

@@ -96,7 +96,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.

+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.

 			 */

 			RAISES_EVENT(USB_Connect);

 

@@ -108,7 +108,7 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.

+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the USB_IsConnected global changed manually.

 			 */

 			RAISES_EVENT(USB_Disconnect);

 

diff --git a/LUFA/Drivers/USB/HighLevel/USBTask.h b/LUFA/Drivers/USB/HighLevel/USBTask.h
index 7e88ce88b..918fa5e31 100644
--- a/LUFA/Drivers/USB/HighLevel/USBTask.h
+++ b/LUFA/Drivers/USB/HighLevel/USBTask.h
@@ -67,14 +67,14 @@
 			 *        which is not always accurate (host may suspend the bus while still connected). If the actual connection state

 			 *        needs to be determined, VBUS should be routed to an external pin, and the auto-detect behaviour turned off by

 			 *        passing the NO_LIMITED_CONTROLLER_CONNECT token to the compiler via the -D switch at compile time. The connection

-			 *        and disconnection events may be manually fired by RAISE_EVENT(), and the USB_IsConnected global changed manually.

+			 *        and disconnection events may be manually fired by \ref RAISE_EVENT(), and the \ref USB_IsConnected global changed manually.

 			 *

 			 *  \ingroup Group_USBManagement

 			 */

 			extern volatile bool USB_IsConnected;

 

 			/** Indicates if the USB interface is currently initialized but not necessarily connected to a host

-			 *  or device (i.e. if USB_Init() has been run). If this is false, all other library globals are invalid.

+			 *  or device (i.e. if \ref USB_Init() has been run). If this is false, all other library globals are invalid.

 			 *

 			 *  \note This variable should be treated as read-only in the user application, and never manually

 			 *        changed in value.

@@ -84,8 +84,8 @@
 			extern volatile bool USB_IsInitialized;

 

 			/** Structure containing the last received Control request when in Device mode (for use in user-applications

-			 *  inside of the USB_UnhandledControlPacket() event, or for filling up with a control request to issue when

-			 *  in Host mode before calling USB_Host_SendControlRequest().

+			 *  inside of the \ref USB_UnhandledControlPacket() event, or for filling up with a control request to issue when

+			 *  in Host mode before calling \ref USB_Host_SendControlRequest().

 			 *

 			 *  \ingroup Group_USBManagement

 			 */

@@ -94,7 +94,7 @@
 			#if defined(USB_CAN_BE_DEVICE) || defined(__DOXYGEN__)

 			/** Indicates if the USB interface is currently suspended by the host when in device mode. When suspended,

 			 *  the device should consume minimal power, and cannot communicate to the host. If Remote Wakeup is

-			 *  supported by the device and USB_RemoteWakeupEnabled is true, suspension can be terminated by the device

+			 *  supported by the device and \ref USB_RemoteWakeupEnabled is true, suspension can be terminated by the device

 			 *  by issuing a Remote Wakeup request.

 			 *

 			 *  \note This global is only present if the user application can be a USB device.

@@ -109,11 +109,11 @@
 

 			#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)

 			/** Indicates the current host state machine state. When in host mode, this indicates the state

-			 *  via one of the values of the USB_Host_States_t enum values in Host.h.

+			 *  via one of the values of the \ref USB_Host_States_t enum values in Host.h.

 			 *

-			 *  This value may be altered by the user application to implement the HOST_STATE_Addressed,

-			 *  HOST_STATE_Configured, HOST_STATE_Ready and HOST_STATE_Suspended states which are not implemented

-			 *  by the library.

+			 *  This value may be altered by the user application to implement the \ref HOST_STATE_Addressed,

+			 *  \ref HOST_STATE_Configured, \ref HOST_STATE_Ready and \ref HOST_STATE_Suspended states which

+			 *  are not implemented by the library.

 			 *

 			 *  \note This global is only present if the user application can be a USB host.

 			 *

@@ -124,35 +124,35 @@
 

 		/* Throwable Events: */

 			#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)

-				/** This module raises the USB Connect event when a USB device has been connected whilst in host

+				/** This module raises the \ref USB_Connect event when a USB device has been connected whilst in host

 				 *  mode, but not yet enumerated.

 				 *

 				 *  \see Events.h for more information on this event.

 				 */

 				RAISES_EVENT(USB_Connect);

 

-				/** This module raises the USB Device Attached event when in host mode, and a device is attached

+				/** This module raises the \ref USB_DeviceAttached event when in host mode, and a device is attached

 				 *  to the AVR's USB interface.

 				 *

 				 *  \see Events.h for more information on this event.

 				 */

 				RAISES_EVENT(USB_DeviceAttached);

 

-				/** This module raises the USB Device Unattached event when in host mode, and a device is removed

+				/** This module raises the \ref USB_DeviceUnattached event when in host mode, and a device is removed

 				 *  from the AVR's USB interface.

 				 *

 				 *  \see Events.h for more information on this event.

 				 */

 				RAISES_EVENT(USB_DeviceUnattached);

 				

-				/** This module raises the USB Device Enumeration Failed event when in host mode, and an

+				/** This module raises the \ref USB_DeviceEnumerationFailed event when in host mode, and an

 				 *  attached USB device has failed to successfully enumerated.

 				 *

 				 *  \see Events.h for more information on this event.

 				 */

 				RAISES_EVENT(USB_DeviceEnumerationFailed);

 

-				/** This module raises the USB Device Enumeration Complete event when in host mode, and an

+				/** This module raises the \ref USB_DeviceEnumerationComplete event when in host mode, and an

 				 *  attached USB device has been successfully enumerated and ready to be used by the user

 				 *  application.

 				 *

@@ -160,7 +160,7 @@
 				 */

 				RAISES_EVENT(USB_DeviceEnumerationComplete);

 

-				/** This module raises the USB Disconnect event when an attached USB device is removed from the USB

+				/** This module raises the \ref USB_Disconnect event when an attached USB device is removed from the USB

 				 *  bus.

 				 *

 				 *  \see Events.h for more information on this event.

@@ -177,11 +177,11 @@
 			 *  The USB task must be serviced within 50mS in all modes, when needed. The task may be serviced 

 			 *  at all times, or (for minimum CPU consumption):

 			 *

-			 *    - In device mode, it may be disabled at start-up, enabled on the firing of the USB_Connect event

-			 *    and disabled again on the firing of the USB_Disconnect event.

+			 *    - In device mode, it may be disabled at start-up, enabled on the firing of the \ref USB_Connect event

+			 *    and disabled again on the firing of the \ref USB_Disconnect event.

 			 *

-			 *    - In host mode, it may be disabled at start-up, enabled on the firing of the USB_DeviceAttached

-			 *    event and disabled again on the firing of the USB_DeviceUnattached event.

+			 *    - In host mode, it may be disabled at start-up, enabled on the firing of the \ref USB_DeviceAttached

+			 *    event and disabled again on the firing of the \ref USB_DeviceUnattached event.

 			 *

 			 *  \see Events.h for more information on the USB events.

 			 *

diff --git a/LUFA/Drivers/USB/LowLevel/DevChapter9.h b/LUFA/Drivers/USB/LowLevel/DevChapter9.h
index 10a91937f..b3cac2d50 100644
--- a/LUFA/Drivers/USB/LowLevel/DevChapter9.h
+++ b/LUFA/Drivers/USB/LowLevel/DevChapter9.h
@@ -83,22 +83,22 @@
 			extern bool USB_CurrentlySelfPowered;

 

 		/* Throwable Events: */

-			/** This module raises the USB_UnhandledControlPacket event when a request to the default control

+			/** This module raises the \ref USB_UnhandledControlPacket event when a request to the default control

 			 *  endpoint has been received, but the library does not implement an internal handler for it.

 			 *

 			 *  \see Events.h for more information on this event.

 			 */

 			RAISES_EVENT(USB_UnhandledControlPacket);

 

-			/** This module raises the USB_ConfigurationChanged event when the host issues a REQ_SetConfiguration

+			/** This module raises the \ref USB_ConfigurationChanged event when the host issues a \ref REQ_SetConfiguration

 			 *  device request, to change the currently selected configuration number.

 			 *

 			 *  \see Events.h for more information on this event.

 			 */

 			RAISES_EVENT(USB_ConfigurationChanged);

 

-			/** This module raises the USB_DeviceEnumerationComplete event when the host has completed its

-			 *  enumeration of the device (i.e. when a REQ_SetConfiguration request changes the current configuration

+			/** This module raises the \ref USB_DeviceEnumerationComplete event when the host has completed its

+			 *  enumeration of the device (i.e. when a \ref REQ_SetConfiguration request changes the current configuration

 			 *  number from 0 to a non-zero value).

 			 *

 			 *  \see Events.h for more information on this event.

diff --git a/LUFA/Drivers/USB/LowLevel/Device.h b/LUFA/Drivers/USB/LowLevel/Device.h
index 206a99361..b3a11d27b 100644
--- a/LUFA/Drivers/USB/LowLevel/Device.h
+++ b/LUFA/Drivers/USB/LowLevel/Device.h
@@ -51,7 +51,7 @@
 	/* Public Interface - May be used in end-application: */

 		/* Macros: */

 			#if defined(USB_FULL_CONTROLLER) || defined(USB_MODIFIED_FULL_CONTROLLER) || defined(__DOXYGEN__)

-				/** Mask for the Options parameter of the USB_Init() function. This indicates that the

+				/** Mask for the Options parameter of the \ref USB_Init() function. This indicates that the

 				 *  USB interface should be initialized in low speed (1.5Mb/s) mode.

 				 *

 				 *  \note Low Speed mode is not available on all USB AVR models.

@@ -78,7 +78,7 @@
 				 *  \note This macro should only be used if the device has indicated to the host that it

 				 *        supports the Remote Wakeup feature in the device descriptors, and should only be

 				 *        issued if the host is currently allowing remote wakeup events from the device (i.e.,

-				 *        the USB_RemoteWakeupEnabled flag is set, see DevChapter9.h documentation).

+				 *        the \ref USB_RemoteWakeupEnabled flag is set).

 				 *

 				 *  \see StdDescriptors.h for more information on the RMWAKEUP feature and device descriptors.

 				 */

@@ -87,7 +87,7 @@
 				/** Indicates if a Remote Wakeup request is being sent to the host. This returns true if a

 				 *  remote wakeup is currently being sent, false otherwise.

 				 *

-				 *  This can be used in conjunction with the USB_Device_IsUSBSuspended() macro to determine if

+				 *  This can be used in conjunction with the \ref USB_Device_IsUSBSuspended() macro to determine if

 				 *  a sent RMWAKEUP request was accepted or rejected by the host.

 				 *

 				 *  \note This macro should only be used if the device has indicated to the host that it

@@ -99,9 +99,9 @@
 				 */

 				static inline bool USB_Device_IsRemoteWakeupSent(void);

 				

-				/** Indicates if the device is currently suspended by the host. While suspended, the device is

-				 *  to enter a low power state until resumed by the host. While suspended no USB traffic to or

-				 *  from the device can occur (except for Remote Wakeup requests).

+				/** Indicates if the device is currently suspended by the host. Whilst suspended, the device is

+				 *  to enter a low power state until resumed by the host. No USB traffic to or from the device

+				 *  can occur (except for Remote Wakeup requests) during suspension by the host.

 				 *

 				 *  \return Boolean true if the USB communications have been suspended by the host, false otherwise.

 				 */

@@ -115,17 +115,17 @@
 			#endif

 

 		/* Enums: */

-			/** Enum for the ErrorCode parameter of the USB_DeviceError event.

+			/** Enum for the ErrorCode parameter of the \ref USB_DeviceError event.

 			 *

 			 *  \see Events.h for more information on this event.

 			 */

 			enum USB_Device_ErrorCodes_t

 			{

-				DEVICE_ERROR_GetDescriptorNotHooked        = 0, /**< Indicates that the GetDescriptor() method

+				DEVICE_ERROR_GetDescriptorNotHooked        = 0, /**< Indicates that the \ref USB_GetDescriptor() method

 				                                                 *   has not been hooked by the user application.

 				                                                 *

 				                                                 *   \see StdDescriptors.h for more information on

-				                                                 *        the GetDescriptor() method.

+				                                                 *        the \ref USB_GetDescriptor() method.

 				                                                 */

 			};

 

diff --git a/LUFA/Drivers/USB/LowLevel/Endpoint.h b/LUFA/Drivers/USB/LowLevel/Endpoint.h
index 816e7632a..172ab33d7 100644
--- a/LUFA/Drivers/USB/LowLevel/Endpoint.h
+++ b/LUFA/Drivers/USB/LowLevel/Endpoint.h
@@ -69,24 +69,24 @@
 

 	/* Public Interface - May be used in end-application: */

 		/* Macros: */

-			/** Endpoint data direction mask for Endpoint_ConfigureEndpoint(). This indicates that the endpoint

+			/** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint

 			 *  should be initialized in the OUT direction - i.e. data flows from host to device.

 			 */

 			#define ENDPOINT_DIR_OUT                      (0 << EPDIR)

 

-			/** Endpoint data direction mask for Endpoint_ConfigureEndpoint(). This indicates that the endpoint

+			/** Endpoint data direction mask for \ref Endpoint_ConfigureEndpoint(). This indicates that the endpoint

 			 *  should be initialized in the IN direction - i.e. data flows from device to host.

 			 */

 			#define ENDPOINT_DIR_IN                       (1 << EPDIR)

 

-			/** Mask for the bank mode selection for the Endpoint_ConfigureEndpoint() macro. This indicates

+			/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates

 			 *  that the endpoint should have one single bank, which requires less USB FIFO memory but results

 			 *  in slower transfers as only one USB device (the AVR or the host) can access the endpoint's

 			 *  bank at the one time.

 			 */

 			#define ENDPOINT_BANK_SINGLE                  (0 << EPBK0)

 

-			/** Mask for the bank mode selection for the Endpoint_ConfigureEndpoint() macro. This indicates

+			/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates

 			 *  that the endpoint should have two banks, which requires more USB FIFO memory but results

 			 *  in faster transfers as one USB device (the AVR or the host) can access one bank while the other

 			 *  accesses the second bank.

@@ -146,7 +146,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the

 			 *        endpoint is selected), and will fire the common endpoint interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define ENDPOINT_INT_SETUP                    UEIENX, (1 << RXSTPE), UEINTX, (1 << RXSTPI)

 

@@ -160,7 +160,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the

 			 *        endpoint is selected), and will fire the common endpoint interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define ENDPOINT_INT_IN                       UEIENX, (1 << TXINE) , UEINTX, (1 << TXINI)

 

@@ -174,7 +174,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* endpoint which requires it (after the

 			 *        endpoint is selected), and will fire the common endpoint interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define ENDPOINT_INT_OUT                      UEIENX, (1 << RXOUTE), UEINTX, (1 << RXOUTI)

 			

@@ -200,7 +200,7 @@
 				static inline uint8_t Endpoint_GetCurrentEndpoint(void);

 				

 				/** Selects the given endpoint number. If the address from the device descriptors is used, the

-				 *  value should be masked with the ENDPOINT_EPNUM_MASK constant to extract only the endpoint

+				 *  value should be masked with the \ref ENDPOINT_EPNUM_MASK constant to extract only the endpoint

 				 *  number (and discarding the endpoint direction bit).

 				 *

 				 *  Any endpoint operations which do not require the endpoint number to be indicated will operate on

@@ -220,8 +220,7 @@
 				/** Enables the currently selected endpoint so that data can be sent and received through it to

 				 *  and from a host.

 				 *

-				 *  \note Endpoints must first be configured properly rather than just being enabled via the

-				 *        Endpoint_ConfigureEndpoint() macro, which calls Endpoint_EnableEndpoint() automatically.

+				 *  \note Endpoints must first be configured properly via \ref Endpoint_ConfigureEndpoint().

 				 */

 				static inline void Endpoint_EnableEndpoint(void);

 

@@ -330,7 +329,7 @@
 				 *  way for devices to indicate invalid commands to the host so that the current transfer can be

 				 *  aborted and the host can begin its own recovery sequence.

 				 *

-				 *  The currently selected endpoint remains stalled until either the Endpoint_ClearStall() macro

+				 *  The currently selected endpoint remains stalled until either the \ref Endpoint_ClearStall() macro

 				 *  is called, or the host issues a CLEAR FEATURE request to the device for the currently selected

 				 *  endpoint.

 				 *

@@ -415,7 +414,7 @@
 			#endif

 

 		/* Enums: */

-			/** Enum for the possible error return codes of the Endpoint_WaitUntilReady function.

+			/** Enum for the possible error return codes of the \ref Endpoint_WaitUntilReady() function.

 			 *

 			 *  \ingroup Group_EndpointRW

 			 */

@@ -430,7 +429,7 @@
 				                                                 */	

 				ENDPOINT_READYWAIT_Timeout                 = 3, /**< The host failed to accept or send the next packet

 				                                                 *   within the software timeout period set by the

-				                                                 *   USB_STREAM_TIMEOUT_MS macro.

+				                                                 *   \ref USB_STREAM_TIMEOUT_MS macro.

 				                                                 */

 			};

 		

@@ -449,7 +448,7 @@
 				                                                 */

 				ENDPOINT_RWSTREAM_ERROR_Timeout            = 2, /**< The host failed to accept or send the next packet

 				                                                 *   within the software timeout period set by the

-				                                                 *   USB_STREAM_TIMEOUT_MS macro.

+				                                                 *   \ref USB_STREAM_TIMEOUT_MS macro.

 				                                                 */

 				ENDPOINT_RWSTREAM_ERROR_CallbackAborted    = 3, /**< Indicates that the stream's callback function

 			                                                     *   aborted the transfer early.

@@ -703,15 +702,15 @@
 			 *  device (i.e. endpoint 1 should be configured before endpoint 2 and so on).

 			 *

 			 *  The endpoint type may be one of the EP_TYPE_* macros listed in LowLevel.h and the direction

-			 *  may be either ENDPOINT_DIR_OUT or ENDPOINT_DIR_IN.

+			 *  may be either \ref ENDPOINT_DIR_OUT or \ref ENDPOINT_DIR_IN.

 			 *

 			 *  The bank size must indicate the maximum packet size that the endpoint can handle. Different

 			 *  endpoint numbers can handle different maximum packet sizes - refer to the chosen USB AVR's

 			 *  datasheet to determine the maximum bank size for each endpoint.

 			 *

-			 *  The banking mode may be either ENDPOINT_BANK_SINGLE or ENDPOINT_BANK_DOUBLE.

+			 *  The banking mode may be either \ref ENDPOINT_BANK_SINGLE or \ref ENDPOINT_BANK_DOUBLE.

 			 *

-			 *  The success of this routine can be determined via the Endpoint_IsConfigured() macro.

+			 *  The success of this routine can be determined via the \ref Endpoint_IsConfigured() macro.

 			 *

 			 *  By default, the routine is entirely dynamic, and will accept both constant and variable inputs.

 			 *  If dynamic configuration is unused, a small space savings can be made by defining the

@@ -733,18 +732,18 @@
 			 *

 			 *  \ingroup Group_EndpointRW

 			 *

-			 *  \return A value from the Endpoint_WaitUntilReady_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_WaitUntilReady_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_WaitUntilReady(void);

 

 			/** Reads and discards the given number of bytes from the endpoint from the given buffer,

 			 *  discarding fully read packets from the host as needed. The last packet is not automatically

 			 *  discarded once the remaining bytes has been read; the user is responsible for manually

-			 *  discarding the last packet from the host via the Endpoint_ClearOUT() macro. Between

+			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between

 			 *  each USB packet, the given stream callback function is executed repeatedly until the next

 			 *  packet is ready, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -755,7 +754,7 @@
 			 *  \param Length    Number of bytes to send via the currently selected endpoint.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Discard_Stream(uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -766,11 +765,11 @@
 			/** Writes the given number of bytes to the endpoint from the given buffer in little endian,

 			 *  sending full packets to the host as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function

+			 *  \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function

 			 *  is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early

 			 *  aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -782,7 +781,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected endpoint into the buffer.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Write_Stream_LE(const void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -793,11 +792,11 @@
 			/** Writes the given number of bytes to the endpoint from the given buffer in big endian,

 			 *  sending full packets to the host as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function

+			 *  \ref Endpoint_ClearIN() macro. Between each USB packet, the given stream callback function

 			 *  is executed repeatedly until the endpoint is ready to accept the next packet, allowing for early

 			 *  aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -809,7 +808,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected endpoint into the buffer.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Write_Stream_BE(const void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -820,11 +819,11 @@
 			/** Reads the given number of bytes from the endpoint from the given buffer in little endian,

 			 *  discarding fully read packets from the host as needed. The last packet is not automatically

 			 *  discarded once the remaining bytes has been read; the user is responsible for manually

-			 *  discarding the last packet from the host via the Endpoint_ClearOUT() macro. Between

+			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between

 			 *  each USB packet, the given stream callback function is executed repeatedly until the endpoint

 			 *  is ready to accept the next packet, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -836,7 +835,7 @@
 			 *  \param Length    Number of bytes to send via the currently selected endpoint.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Read_Stream_LE(void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -847,11 +846,11 @@
 			/** Reads the given number of bytes from the endpoint from the given buffer in big endian,

 			 *  discarding fully read packets from the host as needed. The last packet is not automatically

 			 *  discarded once the remaining bytes has been read; the user is responsible for manually

-			 *  discarding the last packet from the host via the Endpoint_ClearOUT() macro. Between

+			 *  discarding the last packet from the host via the \ref Endpoint_ClearOUT() macro. Between

 			 *  each USB packet, the given stream callback function is executed repeatedly until the endpoint

 			 *  is ready to accept the next packet, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -863,7 +862,7 @@
 			 *  \param Length    Number of bytes to send via the currently selected endpoint.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Endpoint_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Read_Stream_BE(void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -874,7 +873,7 @@
 			/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in little endian,

 			 *  sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared

 			 *  in both failure and success states; the user is responsible for manually clearing the setup OUT to

-			 *  finalize the transfer via the Endpoint_ClearOUT() macro.

+			 *  finalize the transfer via the \ref Endpoint_ClearOUT() macro.

 			 *

 			 *  \note This routine should only be used on CONTROL type endpoints.

 			 *

@@ -886,14 +885,14 @@
 			 *  \param Buffer  Pointer to the source data buffer to read from.

 			 *  \param Length  Number of bytes to read for the currently selected endpoint into the buffer.

 			 *

-			 *  \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Write_Control_Stream_LE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

 

 			/** Writes the given number of bytes to the CONTROL type endpoint from the given buffer in big endian,

 			 *  sending full packets to the host as needed. The host OUT acknowledgement is not automatically cleared

 			 *  in both failure and success states; the user is responsible for manually clearing the setup OUT to

-			 *  finalize the transfer via the Endpoint_ClearOUT() macro.

+			 *  finalize the transfer via the \ref Endpoint_ClearOUT() macro.

 			 *

 			 *  \note This routine should only be used on CONTROL type endpoints.

 			 *

@@ -905,14 +904,14 @@
 			 *  \param Buffer  Pointer to the source data buffer to read from.

 			 *  \param Length  Number of bytes to read for the currently selected endpoint into the buffer.

 			 *

-			 *  \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Write_Control_Stream_BE(const void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

 

 			/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in little endian,

 			 *  discarding fully read packets from the host as needed. The device IN acknowledgement is not

 			 *  automatically sent after success or failure states; the user is responsible for manually sending the

-			 *  setup IN to finalize the transfer via the Endpoint_ClearIN() macro.

+			 *  setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.

 			 *

 			 *  \note This routine should only be used on CONTROL type endpoints.

 			 *

@@ -924,14 +923,14 @@
 			 *  \param Buffer  Pointer to the destination data buffer to write to.

 			 *  \param Length  Number of bytes to send via the currently selected endpoint.

 			 *

-			 *  \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Read_Control_Stream_LE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);

 

 			/** Reads the given number of bytes from the CONTROL endpoint from the given buffer in big endian,

 			 *  discarding fully read packets from the host as needed. The device IN acknowledgement is not

 			 *  automatically sent after success or failure states; the user is responsible for manually sending the

-			 *  setup IN to finalize the transfer via the Endpoint_ClearIN() macro.

+			 *  setup IN to finalize the transfer via the \ref Endpoint_ClearIN() macro.

 			 *

 			 *  \note This routine should only be used on CONTROL type endpoints.

 			 *

@@ -943,7 +942,7 @@
 			 *  \param Buffer  Pointer to the destination data buffer to write to.

 			 *  \param Length  Number of bytes to send via the currently selected endpoint.

 			 *

-			 *  \return A value from the Endpoint_ControlStream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Endpoint_ControlStream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Endpoint_Read_Control_Stream_BE(void* Buffer, uint16_t Length) ATTR_NON_NULL_PTR_ARG(1);		

 			

diff --git a/LUFA/Drivers/USB/LowLevel/Host.h b/LUFA/Drivers/USB/LowLevel/Host.h
index 62921e866..0eb484374 100644
--- a/LUFA/Drivers/USB/LowLevel/Host.h
+++ b/LUFA/Drivers/USB/LowLevel/Host.h
@@ -68,7 +68,7 @@
 				 *  library will return a timeout error code.

 				 *

 				 *  This value may be overridden in the user project makefile as the value of the 

-				 *  USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch.

+				 *  \ref USB_HOST_TIMEOUT_MS token, and passed to the compiler using the -D switch.

 				 */

 				#define USB_HOST_TIMEOUT_MS                1000

 			#endif

@@ -95,7 +95,7 @@
 				 */

 				static inline void USB_Host_ResetBus(void);

 

-				/** Determines if a previously issued bus reset (via the USB_Host_ResetBus() macro) has

+				/** Determines if a previously issued bus reset (via the \ref USB_Host_ResetBus() macro) has

 				 *  completed.

 				 *

 				 *  \return Boolean true if no bus reset is currently being sent, false otherwise.

@@ -114,7 +114,7 @@
 				 */

 				static inline void USB_Host_SuspendBus(void);

 				

-				/** Determines if the USB bus has been suspended via the use of the USB_Host_SuspendBus() macro,

+				/** Determines if the USB bus has been suspended via the use of the \ref USB_Host_SuspendBus() macro,

 				 *  false otherwise. While suspended, no USB communications can occur until the bus is resumed,

 				 *  except for the Remote Wakeup event from the device if supported.

 				 *

@@ -200,28 +200,28 @@
 				HOST_STATE_Suspended                    = 13, /**< May be implemented by the user project. */

 			};

 			

-			/** Enum for the error codes for the USB_HostError event.

+			/** Enum for the error codes for the \ref USB_HostError event.

 			 *

 			 *  \see Events.h for more information on this event.

 			 */

 			enum USB_Host_ErrorCodes_t

 			{

 				HOST_ERROR_VBusVoltageDip       = 0, /**< VBUS voltage dipped to an unacceptable level. This

-				                                      *  error may be the result of an attached device drawing

+				                                      *   error may be the result of an attached device drawing

 				                                      *   too much current from the VBUS line, or due to the

 				                                      *   AVR's power source being unable to supply sufficient

 				                                      *   current.

 				                                      */

 			};

 			

-			/** Enum for the error codes for the USB_DeviceEnumerationFailed event.

+			/** Enum for the error codes for the \ref USB_DeviceEnumerationFailed event.

 			 *

 			 *  \see Events.h for more information on this event.

 			 */

 			enum USB_Host_EnumerationErrorCodes_t

 			{

 				HOST_ENUMERROR_NoError          = 0, /**< No error occurred. Used internally, this is not a valid

-				                                      *   ErrorCode parameter value for the USB_DeviceEnumerationFailed

+				                                      *   ErrorCode parameter value for the \ref USB_DeviceEnumerationFailed

 				                                      *   event.

 				                                      */

 				HOST_ENUMERROR_WaitStage        = 1, /**< One of the delays between enumeration steps failed

diff --git a/LUFA/Drivers/USB/LowLevel/HostChapter9.h b/LUFA/Drivers/USB/LowLevel/HostChapter9.h
index cbb5ba5a8..1e3f7b258 100644
--- a/LUFA/Drivers/USB/LowLevel/HostChapter9.h
+++ b/LUFA/Drivers/USB/LowLevel/HostChapter9.h
@@ -46,7 +46,7 @@
 

 	/* Public Interface - May be used in end-application: */

 		/* Enums: */

-			/** Enum for the USB_Host_SendControlRequest() return code, indicating the reason for the error

+			/** Enum for the \ref USB_Host_SendControlRequest() return code, indicating the reason for the error

 			 *  if the transfer of the request is unsuccessful.

 			 *

 			 *  \ingroup Group_PipeControlReq

@@ -65,7 +65,7 @@
 			};

 			

 		/* Function Prototypes: */

-			/** Sends the request stored in the USB_ControlRequest global structure to the attached device,

+			/** Sends the request stored in the \ref USB_ControlRequest global structure to the attached device,

 			 *  and transfers the data stored in the buffer to the device, or from the device to the buffer

 			 *  as requested. The transfer is made on the currently selected pipe.

 			 *

@@ -74,7 +74,7 @@
 			 *  \param BufferPtr  Pointer to the start of the data buffer if the request has a data stage, or

 			 *                    NULL if the request transfers no data to or from the device.

 			 *

-			 *  \return A value from the USB_Host_SendControlErrorCodes_t enum to indicate the result.

+			 *  \return A value from the \ref USB_Host_SendControlErrorCodes_t enum to indicate the result.

 			 */

 			uint8_t USB_Host_SendControlRequest(void* BufferPtr);

 			

diff --git a/LUFA/Drivers/USB/LowLevel/LowLevel.h b/LUFA/Drivers/USB/LowLevel/LowLevel.h
index 5c474df70..3bf413745 100644
--- a/LUFA/Drivers/USB/LowLevel/LowLevel.h
+++ b/LUFA/Drivers/USB/LowLevel/LowLevel.h
@@ -102,18 +102,18 @@
 		

 	/* Public Interface - May be used in end-application: */

 		/* Macros: */

-			/** Mode mask for the USB_CurrentMode global. This indicates that the USB interface is currently not

+			/** Mode mask for the \ref USB_CurrentMode global. This indicates that the USB interface is currently not

 			 *  initialized into any mode.

 			 */

 			#define USB_MODE_NONE                      0

 

-			/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the

+			/** Mode mask for the \ref USB_CurrentMode global and the \ref USB_Init() function. This indicates that the

 			 *  USB interface is or should be initialized in the USB device mode.

 			 */

 			#define USB_MODE_DEVICE                    1

 

 			#if defined(USB_CAN_BE_HOST) || defined(__DOXYGEN__)

-				/** Mode mask for the USB_CurrentMode global and the USB_Init() function. This indicates that the

+				/** Mode mask for the \ref USB_CurrentMode global and the \ref USB_Init() function. This indicates that the

 				 *  USB interface is or should be initialized in the USB host mode.

 				 *

 				 *  \note This token is not available on AVR models which do not support host mode.

@@ -122,7 +122,7 @@
 			#endif

 			

 			#if defined(USB_CAN_BE_BOTH) || defined(__DOXYGEN__)

-				/** Mode mask for the the USB_Init() function. This indicates that the USB interface should be

+				/** Mode mask for the the \ref USB_Init() function. This indicates that the USB interface should be

 				 *  initialized into whatever mode the UID pin of the USB AVR indicates, and that the device

 				 *  should swap over its mode when the level of the UID pin changes during operation.

 				 *

@@ -131,27 +131,27 @@
 				#define USB_MODE_UID                       3

 			#endif

 			

-			/** Regulator disable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad

+			/** Regulator disable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad

 			 *  regulator should be enabled to regulate the data pin voltages to within the USB standard.

 			 *

 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.

 			 */

 			#define USB_OPT_REG_DISABLED               (1 << 1)

 

-			/** Regulator enable option mask for USB_Init(). This indicates that the internal 3.3V USB data pad

+			/** Regulator enable option mask for \ref USB_Init(). This indicates that the internal 3.3V USB data pad

 			 *  regulator should be disabled and the AVR's VCC level used for the data pads.

 			 *

 			 *  \note See USB AVR data sheet for more information on the internal pad regulator.

 			 */

 			#define USB_OPT_REG_ENABLED                (0 << 1)

 			

-			/** Manual PLL control option mask for USB_Init(). This indicates to the library that the user application

+			/** Manual PLL control option mask for \ref USB_Init(). This indicates to the library that the user application

 			 *  will take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock

 			 *  that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.

 			 */

 			#define USB_OPT_MANUAL_PLL                 (1 << 2)

 

-			/** Automatic PLL control option mask for USB_Init(). This indicates to the library that the library should

+			/** Automatic PLL control option mask for \ref USB_Init(). This indicates to the library that the library should

 			 *  take full responsibility for controlling the AVR's PLL (used to generate the high frequency clock

 			 *  that the USB controller requires) and ensuring that it is locked at the correct frequency for USB operations.

 			 */

@@ -192,7 +192,7 @@
 

 			/** Detaches the device from the USB bus. This has the effect of removing the device from any

 			 *  host if, ceasing USB communications. If no host is present, this prevents any host from

-			 *  enumerating the device once attached until USB_Attach() is called.

+			 *  enumerating the device once attached until \ref USB_Attach() is called.

 			 */

 			#define USB_Detach()                    MACROS{ UDCON  |=  (1 << DETACH);  }MACROE

 

@@ -212,7 +212,7 @@
 				 *  is not received or acknowledged within this time period, the stream function will fail.

 				 *

 				 *  This value may be overridden in the user project makefile as the value of the 

-				 *  USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.

+				 *  \ref USB_STREAM_TIMEOUT_MS token, and passed to the compiler using the -D switch.

 				 */

 				#define USB_STREAM_TIMEOUT_MS       100

 			#endif

@@ -229,7 +229,7 @@
 			 *  interface reset and re-enumeration.

 			 *

 			 *  \param Mode     This is a mask indicating what mode the USB interface is to be initialized to.

-			 *                  Valid mode masks are USB_MODE_DEVICE, USB_MODE_HOST or USB_MODE_UID.

+			 *                  Valid mode masks are \ref USB_MODE_DEVICE, \ref USB_MODE_HOST or \ref USB_MODE_UID.

 			 *

 			 *  \param Options  Mask indicating the options which should be used when initializing the USB

 			 *                  interface to control the USB interface's behaviour. This should be comprised of

@@ -272,7 +272,7 @@
 			

 			/** Shuts down the USB interface. This turns off the USB interface after deallocating all USB FIFO

 			 *  memory, endpoints and pipes. When turned off, no USB functionality can be used until the interface

-			 *  is restarted with the USB_Init() function.

+			 *  is restarted with the \ref USB_Init() function.

 			 */

 			void USB_ShutDown(void);

 

@@ -283,11 +283,11 @@
 

 		/* Enums: */

 			/** Enum for error codes relating to the powering on of the USB interface. These error codes are

-			 *  used in the ErrorCode parameter value of the USB_PowerOnFail event.

+			 *  used in the ErrorCode parameter value of the \ref USB_PowerOnFail event.

 			 */

 			enum USB_PowerOnErrorCodes_t

 			{

-				POWERON_ERROR_NoUSBModeSpecified       = 0, /**< Indicates that USB_Init() was called with an

+				POWERON_ERROR_NoUSBModeSpecified       = 0, /**< Indicates that \ref USB_Init() was called with an

 			                                                 *   invalid or missing Mode parameter.

 			                                                 */

 			};

@@ -305,7 +305,7 @@
 			

 			#if !defined(USE_STATIC_OPTIONS) || defined(__DOXYGEN__)

 				extern volatile uint8_t USB_Options;

-				/** Indicates the current USB options that the USB interface was initialized with when USB_Init()

+				/** Indicates the current USB options that the USB interface was initialized with when \ref USB_Init()

 				 *  was called. This value will be one of the USB_MODE_* masks defined elsewhere in this module.

 				 *

 				 *  \note This variable should be treated as read-only in the user application, and never manually

@@ -314,7 +314,7 @@
 			#endif

 

 		/* Throwable Events: */

-			/** This module raises the USB_Disconnect event if the USB interface is reset (such as during a mode

+			/** This module raises the \ref USB_Disconnect event if the USB interface is reset (such as during a mode

 			 *  change while in UID mode) while the USB interface is connected to a device when in host mode, or

 			 *  a host while in device mode.

 			 *

diff --git a/LUFA/Drivers/USB/LowLevel/OTG.h b/LUFA/Drivers/USB/LowLevel/OTG.h
index 1f59e0cfa..8defff7ff 100644
--- a/LUFA/Drivers/USB/LowLevel/OTG.h
+++ b/LUFA/Drivers/USB/LowLevel/OTG.h
@@ -102,7 +102,7 @@
 				 *  There are two different methods of sending a SRP - either pulses on the VBUS line, or by

 				 *  pulsing the Data + line via the internal pull-up resistor.

 				 *

-				 *  \param SRPTypeMask  Mask indicating the type of SRP to use, either USB_OTG_SRP_VBUS or USB_OTG_STP_DATA.

+				 *  \param SRPTypeMask  Mask indicating the type of SRP to use, either \ref USB_OTG_SRP_VBUS or \ref USB_OTG_STP_DATA.

 				 */

 				static inline void USB_OTG_DEV_Initiate_SRP(uint8_t SRPTypeMask);

 			#else

@@ -115,7 +115,7 @@
 				

 				#define USB_OTG_HOST_Accept_HNP()          MACROS{ OTGCON |=  (1 << HNPREQ); }MACROE

 

-				#define USB_OTG_HOST_Reject_HNP()         MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE

+				#define USB_OTG_HOST_Reject_HNP()          MACROS{ OTGCON &= ~(1 << HNPREQ); }MACROE

 				

 				#define USB_OTG_HOST_IsHNPReceived()             ((OTGCON &   (1 << HNPREQ)) ? true : false)

 				

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index 25121cafa..748dc590b 100644
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -77,43 +77,43 @@
 

 	/* Public Interface - May be used in end-application: */

 		/* Macros: */

-			/** Mask for Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */

+			/** Mask for \ref Pipe_GetErrorFlags(), indicating that a CRC error occurred in the pipe on the received data. */

 			#define PIPE_ERRORFLAG_CRC16            (1 << 4)

 

-			/** Mask for Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */

+			/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware timeout error occurred in the pipe. */

 			#define PIPE_ERRORFLAG_TIMEOUT          (1 << 3)

 

-			/** Mask for Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */

+			/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware PID error occurred in the pipe. */

 			#define PIPE_ERRORFLAG_PID              (1 << 2)

 

-			/** Mask for Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */

+			/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data PID error occurred in the pipe. */

 			#define PIPE_ERRORFLAG_DATAPID          (1 << 1)

 

-			/** Mask for Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */

+			/** Mask for \ref Pipe_GetErrorFlags(), indicating that a hardware data toggle error occurred in the pipe. */

 			#define PIPE_ERRORFLAG_DATATGL          (1 << 0)

 

-			/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),

+			/** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes),

 			 *  which will trigger a control request on the attached device when data is written to the pipe.

 			 */

 			#define PIPE_TOKEN_SETUP                (0 << PTOKEN0)

 

-			/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),

+			/** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),

 			 *  indicating that the pipe data will flow from device to host.

 			 */

 			#define PIPE_TOKEN_IN                   (1 << PTOKEN0)

 

-			/** Token mask for Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),

+			/** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes),

 			 *  indicating that the pipe data will flow from host to device.

 			 */

 			#define PIPE_TOKEN_OUT                  (2 << PTOKEN0)

 

-			/** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe

+			/** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe

 			 *  should have one single bank, which requires less USB FIFO memory but results in slower transfers as

 			 *  only one USB device (the AVR or the attached device) can access the pipe's bank at the one time.

 			 */

 			#define PIPE_BANK_SINGLE                (0 << EPBK0)

 

-			/** Mask for the bank mode selection for the Pipe_ConfigurePipe() macro. This indicates that the pipe

+			/** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe

 			 *  should have two banks, which requires more USB FIFO memory but results in faster transfers as one

 			 *  USB device (the AVR or the attached device) can access one bank while the other accesses the second

 			 *  bank.

@@ -168,7 +168,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define PIPE_INT_IN                     UPIENX, (1 << RXINE) , UPINTX, (1 << RXINI)

 

@@ -182,7 +182,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define PIPE_INT_OUT                   UPIENX, (1 << TXOUTE), UPINTX, (1 << TXOUTI)

 

@@ -195,7 +195,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define PIPE_INT_SETUP                 UPIENX, (1 << TXSTPE) , UPINTX, (1 << TXSTPI)

 

@@ -208,9 +208,9 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 *

-			 *  \see Pipe_GetErrorFlags() for more information on the pipe errors.

+			 *  \see \ref Pipe_GetErrorFlags() for more information on the pipe errors.

 			 */

 			#define PIPE_INT_ERROR                 UPIENX, (1 << PERRE), UPINTX, (1 << PERRI)

 

@@ -223,9 +223,9 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 *

-			 *  \see Pipe_IsNAKReceived() for more information on pipe NAKs.

+			 *  \see \ref Pipe_IsNAKReceived() for more information on pipe NAKs.

 			 */

 			#define PIPE_INT_NAK                   UPIENX, (1 << NAKEDE), UPINTX, (1 << NAKEDI)

 

@@ -238,7 +238,7 @@
 			 *  \note This interrupt must be enabled and cleared on *each* pipe which requires it (after the pipe

 			 *        is selected), and will fire the common pipe interrupt vector.

 			 *

-			 *  \see ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

+			 *  \see \ref ENDPOINT_PIPE_vect for more information on the common pipe and endpoint interrupt vector.

 			 */

 			#define PIPE_INT_STALL                 UPIENX, (1 << RXSTALLE), UPINTX, (1 << RXSTALLI)

 

@@ -278,8 +278,7 @@
 				/** Enables the currently selected pipe so that data can be sent and received through it to and from

 				 *  an attached device.

 				 *

-				 *  \note Pipes must first be configured properly rather than just being enabled via the

-				 *        Pipe_ConfigurePipe() macro, which calls Pipe_EnablePipe() automatically.

+				 *  \note Pipes must first be configured properly via \ref Pipe_ConfigurePipe().

 				 */

 				static inline void Pipe_EnablePipe(void);

 

@@ -365,7 +364,7 @@
 				/** Determines if the master pipe error flag is set for the currently selected pipe, indicating that

 				 *  some sort of hardware error has occurred on the pipe.

 				 *

-				 *  \see Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.

+				 *  \see \ref Pipe_GetErrorFlags() macro for information on retrieving the exact error flag.

 				 *

 				 *  \return Boolean true if an error has occurred on the selected pipe, false otherwise

 				 */

@@ -445,7 +444,7 @@
 				/** Determines if the device sent a NAK (Negative Acknowledge) in response to the last sent packet on

 				 *  the currently selected pipe. This occurs when the host sends a packet to the device, but the device

 				 *  is not currently ready to handle the packet (i.e. its endpoint banks are full). Once a NAK has been

-				 *  received, it must be cleared using Pipe_ClearNAKReceived() before the previous (or any other) packet

+				 *  received, it must be cleared using \ref Pipe_ClearNAKReceived() before the previous (or any other) packet

 				 *  can be re-sent.

 				 *

 				 *  \ingroup Group_PipePacketManagement

@@ -458,7 +457,7 @@
 				 *

 				 *  \ingroup Group_PipePacketManagement

 				 *

-				 *  \see Pipe_IsNAKReceived() for more details.

+				 *  \see \ref Pipe_IsNAKReceived() for more details.

 				 */

 				static inline void Pipe_ClearNAKReceived(void);

 				 

@@ -559,7 +558,7 @@
 				PIPE_READYWAIT_DeviceDisconnected      = 2,	/**< Device was disconnected from the host while waiting. */

 				PIPE_READYWAIT_Timeout                 = 3, /**< The device failed to accept or send the next packet

 				                                             *   within the software timeout period set by the

-				                                             *   USB_STREAM_TIMEOUT_MS macro.

+				                                             *   \ref USB_STREAM_TIMEOUT_MS macro.

 				                                             */

 			};

 

@@ -576,7 +575,7 @@
 			                                                 */		

 				PIPE_RWSTREAM_ERROR_Timeout            = 3, /**< The device failed to accept or send the next packet

 				                                             *   within the software timeout period set by the

-				                                             *   USB_STREAM_TIMEOUT_MS macro.

+				                                             *   \ref USB_STREAM_TIMEOUT_MS macro.

 				                                             */

 				PIPE_RWSTREAM_ERROR_CallbackAborted    = 4, /**< Indicates that the stream's callback function aborted

 			                                                 *   the transfer early.

@@ -811,9 +810,9 @@
 			 *  numbers can handle different maximum packet sizes - refer to the chosen USB AVR's datasheet to

 			 *  determine the maximum bank size for each pipe.

 			 *

-			 *  The banking mode may be either PIPE_BANK_SINGLE or PIPE_BANK_DOUBLE.

+			 *  The banking mode may be either \ref PIPE_BANK_SINGLE or \ref PIPE_BANK_DOUBLE.

 			 *

-			 *  A newly configured pipe is frozen by default, and must be unfrozen before use via the Pipe_Unfreeze() macro.

+			 *  A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() macro.

 			 *

 			 *  \note This routine will select the specified pipe, and the pipe will remain selected once the

 			 *        routine completes regardless of if the pipe configuration succeeds.

@@ -835,10 +834,10 @@
 			/** Writes the given number of bytes to the pipe from the given buffer in little endian,

 			 *  sending full packets to the device as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is

+			 *  \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is

 			 *  executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -848,7 +847,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected pipe into the buffer.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Pipe_Write_Stream_LE(const void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -859,10 +858,10 @@
 			/** Writes the given number of bytes to the pipe from the given buffer in big endian,

 			 *  sending full packets to the device as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is

+			 *  \ref Pipe_ClearOUT() macro. Between each USB packet, the given stream callback function is

 			 *  executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -872,7 +871,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected pipe into the buffer.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Pipe_Write_Stream_BE(const void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -882,11 +881,11 @@
 

 			/** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host

 			 *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the

-			 *  user is responsible for manually discarding the last packet from the device via the Pipe_ClearIN() macro.

+			 *  user is responsible for manually discarding the last packet from the device via the \ref Pipe_ClearIN() macro.

 			 *  Between each USB packet, the given stream callback function is executed repeatedly until the next packet is ready,

 			 *  allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -895,7 +894,7 @@
 			 *  \param Length  Number of bytes to send via the currently selected pipe.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Pipe_Discard_Stream(uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -906,10 +905,10 @@
 			/** Reads the given number of bytes from the pipe into the given buffer in little endian,

 			 *  sending full packets to the device as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is

+			 *  \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is

 			 *  executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -919,7 +918,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected pipe to read from.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Pipe_Read_Stream_LE(void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)

@@ -930,10 +929,10 @@
 			/** Reads the given number of bytes from the pipe into the given buffer in big endian,

 			 *  sending full packets to the device as needed. The last packet filled is not automatically sent;

 			 *  the user is responsible for manually sending the last written packet to the host via the

-			 *  Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is

+			 *  \ref Pipe_ClearIN() macro. Between each USB packet, the given stream callback function is

 			 *  executed repeatedly until the next packet is ready, allowing for early aborts of stream transfers.

 			 *

-			 *	The callback routine should be created using the STREAM_CALLBACK() macro. If the token

+			 *	The callback routine should be created using the \ref STREAM_CALLBACK() macro. If the token

 			 *  NO_STREAM_CALLBACKS is passed via the -D option to the compiler, stream callbacks are disabled

 			 *  and this function has the Callback parameter omitted.

 			 *

@@ -943,7 +942,7 @@
 			 *  \param Length    Number of bytes to read for the currently selected pipe to read from.

 			 *  \param Callback  Name of a callback routine to call between successive USB packet transfers, NULL if no callback

 			 *

-			 *  \return A value from the Pipe_Stream_RW_ErrorCodes_t enum.

+			 *  \return A value from the \ref Pipe_Stream_RW_ErrorCodes_t enum.

 			 */

 			uint8_t Pipe_Read_Stream_BE(void* Buffer, uint16_t Length

 			#if !defined(NO_STREAM_CALLBACKS) || defined(__DOXYGEN__)