Added new Pipe_BoundEndpointNumber() and Pipe_IsEndpointBound() functions.

3 files changed, 37 insertions, 4 deletions

diff --git a/LUFA/Drivers/USB/LowLevel/Host.c b/LUFA/Drivers/USB/LowLevel/Host.c
index ae7525bee..3d99b2594 100644
--- a/LUFA/Drivers/USB/LowLevel/Host.c
+++ b/LUFA/Drivers/USB/LowLevel/Host.c
@@ -187,7 +187,6 @@ void USB_Host_ProcessNextHostState(void)
 

 			EVENT_USB_DeviceEnumerationComplete();

 			USB_HostState = HOST_STATE_Addressed;

-

 			break;

 	}

 

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.c b/LUFA/Drivers/USB/LowLevel/Pipe.c
index 7d3e87602..0a32f183b 100644
--- a/LUFA/Drivers/USB/LowLevel/Pipe.c
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.c
@@ -70,6 +70,22 @@ void Pipe_ClearPipes(void)
 	}

 }

 

+bool Pipe_IsEndpointBound(uint8_t EndpointAddress)

+{

+	uint8_t PrevPipeNumber = Pipe_GetPipeNumber();

+

+	for (uint8_t PNum = 0; PNum < PIPE_TOTAL_PIPES; PNum++)

+	{

+		Pipe_SelectPipe(PNum);

+		

+		if (Pipe_IsConfigured() && (Pipe_BoundEndpointAddress() == EndpointAddress))

+		  return true;

+	}

+	

+	Pipe_SelectPipe(PrevPipeNumber);

+	return false;

+}

+

 uint8_t Pipe_WaitUntilReady(void)

 {

 	#if (USB_STREAM_TIMEOUT_MS < 0xFF)

diff --git a/LUFA/Drivers/USB/LowLevel/Pipe.h b/LUFA/Drivers/USB/LowLevel/Pipe.h
index fae8105ff..b6fad5146 100644
--- a/LUFA/Drivers/USB/LowLevel/Pipe.h
+++ b/LUFA/Drivers/USB/LowLevel/Pipe.h
@@ -257,6 +257,13 @@
 				 */

 				static inline bool Pipe_IsConfigured(void);

 				

+				/** Retrieves the endpoint number of the endpoint within the attached device that the currently selected

+				 *  pipe is bound to.

+				 *

+				 *  \return Endpoint number the currently selected pipe is bound to

+				 */

+				static inline uint8_t Pipe_BoundEndpointNumber(void);

+

 				/** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds.

 				 *

 				 *  \param[in] Milliseconds  Number of milliseconds between each pipe poll

@@ -427,6 +434,8 @@
 

 				#define Pipe_IsConfigured()            ((UPSTAX  & (1 << CFGOK)) ? true : false)

 

+				#define Pipe_BoundEndpointNumber()     ((UPCFG0X >> PEPNUM0) & PIPE_EPNUM_MASK)

+				

 				#define Pipe_SetInterruptPeriod(ms)    MACROS{ UPCFG2X = ms; }MACROE

 

 				#define Pipe_GetPipeInterrupts()       UPINT

@@ -764,14 +773,23 @@
 			bool Pipe_ConfigurePipe(const uint8_t  Number, const uint8_t Type, const uint8_t Token, const uint8_t EndpointNumber,

 			                        const uint16_t Size, const uint8_t Banks);

 

-			/** Spinloops until the currently selected non-control pipe is ready for the next packed of data

-			 *  to be read or written to it.

+			/** Spinloops until the currently selected non-control pipe is ready for the next packed of data to be read 

+			 *  or written to it, aborting in the case of an error condition (such as a timeout or device disconnect).

 			 *

 			 *  \ingroup Group_PipeRW

 			 *

 			 *  \return A value from the Pipe_WaitUntilReady_ErrorCodes_t enum.

 			 */

-			uint8_t Pipe_WaitUntilReady(void);		

+			uint8_t Pipe_WaitUntilReady(void);

+			

+			/** Determines if a pipe has been bound to the given device endpoint address. If a pipe which is bound to the given

+			 *  endpoint is found, it is automatically selected.

+			 *

+			 *  \param EndpointAddress Address of the endpoint within the attached device to check

+			 *

+			 *  \return Boolean true if a pipe bound to the given endpoint address is found, false otherwise

+			 */

+			bool Pipe_IsEndpointBound(uint8_t EndpointAddress);

 		

 			/** Reads and discards the given number of bytes from the pipe, discarding fully read packets from the host

 			 *  as needed. The last packet is not automatically discarded once the remaining bytes has been read; the