Fixed incorrect PID value being used in the USBtoSerial project (thanks to Phill).

1 files changed, 4 insertions, 3 deletions

diff --git a/LUFA/Drivers/USB/HighLevel/USBTask.h b/LUFA/Drivers/USB/HighLevel/USBTask.h
index 21b1ae200..1e1209a5f 100644
--- a/LUFA/Drivers/USB/HighLevel/USBTask.h
+++ b/LUFA/Drivers/USB/HighLevel/USBTask.h
@@ -128,14 +128,15 @@
 			 *  in device mode) in order to manage USB communications. This task may be executed inside an RTOS,

 			 *  scheduler (e.g. the simple LUFA Scheduler), fast timer ISR or the main user application loop.

 			 *

-			 *  The USB task must be serviced within 50mS in all modes, when needed. The task may be serviced 

-			 *  at all times, or (for minimum CPU consumption):

+			 *  The USB task must be serviced within 30ms while in device mode, or within 1ms while in host mode.

+			 *  The task may be serviced at all times, or (for minimum CPU consumption):

 			 *

 			 *    - In device mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_Connect() event

 			 *    and disabled again on the firing of the \ref EVENT_USB_Disconnect() event.

 			 *

 			 *    - In host mode, it may be disabled at start-up, enabled on the firing of the \ref EVENT_USB_DeviceAttached()

-			 *    event and disabled again on the firing of the \ref EVENT_USB_DeviceUnattached() event.

+			 *    event and disabled again on the firing of the \ref EVENT_USB_DeviceEnumerationComplete() or

+			 *    \ref EVENT_USB_DeviceEnumerationFailed() events.

 			 *

 			 *  If in device mode (only), the control endpoint can instead be managed via interrupts entirely by the library

 			 *  by defining the INTERRUPT_CONTROL_ENDPOINT token and passing it to the compiler via the -D switch.