diff options
author | Dean Camera <dean@fourwalledcubicle.com> | 2012-05-10 19:24:58 +0000 |
---|---|---|
committer | Dean Camera <dean@fourwalledcubicle.com> | 2012-05-10 19:24:58 +0000 |
commit | 359fbfe14d00ab378f85a36664820ea9ba538c3f (patch) | |
tree | 0929d5663a3be4dc078dda0aba5ba798ebb627ab /LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h | |
parent | e8570c4a37e41117e3fd1e989e0b41f1e9608f3c (diff) | |
download | lufa-359fbfe14d00ab378f85a36664820ea9ba538c3f.tar.gz lufa-359fbfe14d00ab378f85a36664820ea9ba538c3f.tar.bz2 lufa-359fbfe14d00ab378f85a36664820ea9ba538c3f.zip |
Add branch for the conversion of demos to use standard C header files for configuration, rather than makefile defined macros.
Diffstat (limited to 'LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h')
-rw-r--r-- | LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h | 124 |
1 files changed, 58 insertions, 66 deletions
diff --git a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h index f17fa5376..837afe8b8 100644 --- a/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h +++ b/LUFA/Drivers/USB/Core/UC3/Pipe_UC3.h @@ -131,49 +131,22 @@ /** \name Pipe Token Masks */ //@{ - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a SETUP token (for CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a SETUP token (for CONTROL type pipes), * which will trigger a control request on the attached device when data is written to the pipe. */ #define PIPE_TOKEN_SETUP AVR32_USBB_UPCFG0_PTOKEN_SETUP - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a IN token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a IN token (for non-CONTROL type pipes), * indicating that the pipe data will flow from device to host. */ #define PIPE_TOKEN_IN AVR32_USBB_UPCFG0_PTOKEN_IN - /** Token mask for \ref Pipe_ConfigurePipe(). This sets the pipe as a OUT token (for non-CONTROL type pipes), + /** Token mask for \ref Pipe_SetPipeToken() and \ref Pipe_GetPipeToken(). This sets the pipe as a OUT token (for non-CONTROL type pipes), * indicating that the pipe data will flow from host to device. */ #define PIPE_TOKEN_OUT AVR32_USBB_UPCFG0_PTOKEN_OUT //@} - /** \name Pipe Bank Mode Masks */ - //@{ - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have one single bank, which requires less USB FIFO memory but results in slower transfers as - * only one USB device (the AVR or the attached device) can access the pipe's bank at the one time. - */ - #define PIPE_BANK_SINGLE AVR32_USBB_UPCFG0_PBK_SINGLE - - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe - * should have two banks, which requires more USB FIFO memory but results in faster transfers as one - * USB device (the AVR or the attached device) can access one bank while the other accesses the second - * bank. - */ - #define PIPE_BANK_DOUBLE AVR32_USBB_UPCFG0_PBK_DOUBLE - - #if defined(USB_SERIES_UC3A3_AVR32) || defined(USB_SERIES_UC3A4_AVR32) || defined(__DOXYGEN__) - /** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the - * pipe should have three banks, which requires more USB FIFO memory but results in faster transfers - * as one USB device (the AVR or the attached device) can access one bank while the other accesses the - * remaining banks. - * - * \note Not available on all AVR models. - */ - #define PIPE_BANK_TRIPLE AVR32_USBB_UPCFG0_PBK_TRIPLE - #endif - //@} - /** Default size of the default control pipe's bank, until altered by the Endpoint0Size value * in the device descriptor of the attached device. */ @@ -224,6 +197,16 @@ return (&AVR32_USBB.UPSTA0)[USB_Pipe_SelectedPipe].pbyct; } + /** Determines the currently selected pipe's direction. + * + * \return The currently selected pipe's direction, as a \c PIPE_DIR_* mask. + */ + static inline uint8_t Pipe_GetPipeDirection(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline uint8_t Pipe_GetPipeDirection(void) + { + return (((&AVR32_USBB.UPCFG0)[USB_Endpoint_SelectedEndpoint].ptoken == PIPE_TOKEN_OUT) ? PIPE_DIR_OUT : PIPE_DIR_IN); + } + /** Returns the pipe address of the currently selected pipe. This is typically used to save the * currently selected pipe number so that it can be restored after another pipe has been manipulated. * @@ -232,30 +215,32 @@ static inline uint8_t Pipe_GetCurrentPipe(void) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; static inline uint8_t Pipe_GetCurrentPipe(void) { - return USB_Pipe_SelectedPipe; + return (USB_Pipe_SelectedPipe | Pipe_GetPipeDirection()); } - /** Selects the given pipe number. Any pipe operations which do not require the pipe number to be + /** Selects the given pipe address. Any pipe operations which do not require the pipe address to be * indicated will operate on the currently selected pipe. * - * \param[in] PipeNumber Index of the pipe to select. + * \param[in] Address Address of the pipe to select. */ - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_SelectPipe(const uint8_t PipeNumber) + static inline void Pipe_SelectPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_SelectPipe(const uint8_t Address) { - USB_Pipe_SelectedPipe = PipeNumber; + USB_Pipe_SelectedPipe = (Address & PIPE_EPNUM_MASK); } /** Resets the desired pipe, including the pipe banks and flags. * - * \param[in] PipeNumber Index of the pipe to reset. + * \param[in] Address Index of the pipe to reset. */ - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) ATTR_ALWAYS_INLINE; - static inline void Pipe_ResetPipe(const uint8_t PipeNumber) + static inline void Pipe_ResetPipe(const uint8_t Address) ATTR_ALWAYS_INLINE; + static inline void Pipe_ResetPipe(const uint8_t Address) { + uint32_t PipeNumber = (Address & PIPE_EPNUM_MASK); + AVR32_USBB.uprst |= (AVR32_USBB_PRST0_MASK << PipeNumber); AVR32_USBB.uprst &= ~(AVR32_USBB_PRST0_MASK << PipeNumber); - USB_Pipe_FIFOPos[USB_Pipe_SelectedPipe] = &AVR32_USBB_SLAVE[USB_Pipe_SelectedPipe * PIPE_HSB_ADDRESS_SPACE_SIZE]; + USB_Pipe_FIFOPos[PipeNumber] = &AVR32_USBB_SLAVE[PipeNumber * PIPE_HSB_ADDRESS_SPACE_SIZE]; } /** Enables the currently selected pipe so that data can be sent and received through it to and from @@ -349,7 +334,7 @@ static inline uint8_t Pipe_GetBoundEndpointAddress(void) { return ((&AVR32_USBB.UPCFG0)[USB_Pipe_SelectedPipe].pepnum | - ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_EPDIR_MASK : 0)); + ((Pipe_GetPipeToken() == PIPE_TOKEN_IN) ? PIPE_DIR_IN : PIPE_DIR_OUT)); } /** Sets the period between interrupts for an INTERRUPT type pipe to a specified number of milliseconds. @@ -376,17 +361,17 @@ AVR32_USBB_P0INT_MASK)) >> AVR32_USBB_P0INT_OFFSET); } - /** Determines if the specified pipe number has interrupted (valid only for INTERRUPT type + /** Determines if the specified pipe address has interrupted (valid only for INTERRUPT type * pipes). * - * \param[in] PipeNumber Index of the pipe whose interrupt flag should be tested. + * \param[in] Address Address of the pipe whose interrupt flag should be tested. * * \return Boolean \c true if the specified pipe has interrupted, \c false otherwise. */ - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; - static inline bool Pipe_HasPipeInterrupted(const uint8_t PipeNumber) + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) ATTR_WARN_UNUSED_RESULT ATTR_ALWAYS_INLINE; + static inline bool Pipe_HasPipeInterrupted(const uint8_t Address) { - return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << PipeNumber)) ? true : false); + return ((AVR32_USBB.uhint & (AVR32_USBB_P0INTES_MASK << (Address & PIPE_EPNUM_MASK))) ? true : false); } /** Unfreezes the selected pipe, allowing it to communicate with an attached device. */ @@ -821,8 +806,22 @@ extern uint8_t USB_Host_ControlPipeSize; /* Function Prototypes: */ - /** Configures the specified pipe number with the given pipe type, token, target endpoint number in the - * attached device, bank size and banking mode. + /** Configures a table of pipe descriptions, in sequence. This function can be used to configure multiple + * pipes at the same time. + * + * \note Pipe with a zero address will be ignored, thus this function cannot be used to configure the + * control pipe. + * + * \param[in] Table Pointer to a table of pipe descriptions. + * \param[in] Entries Number of entries in the pipe table to configure. + * + * \return Boolean \c true if all pipes configured successfully, \c false otherwise. + */ + bool Pipe_ConfigurePipeTable(const USB_Pipe_Table_t* const Table, + const uint8_t Entries); + + /** Configures the specified pipe address with the given pipe type, endpoint address within the attached device, bank size + * and number of hardware banks. * * A newly configured pipe is frozen by default, and must be unfrozen before use via the \ref Pipe_Unfreeze() * before being used. Pipes should be kept frozen unless waiting for data from a device while in IN mode, or @@ -830,25 +829,19 @@ * numbers of IN requests without automatic freezing - this can be overridden by a call to * \ref Pipe_SetFiniteINRequests(). * - * \param[in] Number Pipe number to configure. This must be more than 0 and less than \ref PIPE_TOTAL_PIPES. - * - * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low - * Speed USB devices - refer to the USB 2.0 specification. + * \param[in] Address Pipe address to configure. * - * \param[in] Token Pipe data token, either \ref PIPE_TOKEN_SETUP, \ref PIPE_TOKEN_OUT or \ref PIPE_TOKEN_IN. - * All pipes (except Control type) are unidirectional - data may only be read from or - * written to the pipe bank based on its direction, not both. + * \param[in] Type Type of pipe to configure, an \c EP_TYPE_* mask. Not all pipe types are available on Low + * Speed USB devices - refer to the USB 2.0 specification. * - * \param[in] EndpointNumber Endpoint index within the attached device that the pipe should interface to. + * \param[in] EndpointAddress Endpoint address within the attached device that the pipe should interface to. * - * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to - * the USB device, or after they have been received from the USB device (depending on - * the pipe's data direction). The bank size must indicate the maximum packet size that - * the pipe can handle. + * \param[in] Size Size of the pipe's bank, where packets are stored before they are transmitted to + * the USB device, or after they have been received from the USB device (depending on + * the pipe's data direction). The bank size must indicate the maximum packet size that + * the pipe can handle. * - * \param[in] Banks Number of banks to use for the pipe being configured, a \c PIPE_BANK_* mask. More banks - * uses more USB DPRAM, but offers better performance. Isochronous type pipes <b>must</b> - * have at least two banks. + * \param[in] Banks Number of banks to use for the pipe being configured. * * \note When the \c ORDERED_EP_CONFIG compile time option is used, Pipes <b>must</b> be configured in ascending order, * or bank corruption will occur. @@ -867,10 +860,9 @@ * * \return Boolean \c true if the configuration succeeded, \c false otherwise. */ - bool Pipe_ConfigurePipe(const uint8_t Number, + bool Pipe_ConfigurePipe(const uint8_t Address, const uint8_t Type, - const uint8_t Token, - const uint8_t EndpointNumber, + const uint8_t EndpointAddress, const uint16_t Size, const uint8_t Banks); |