Run wspurify script on /trunk/ and /branches/ C source files, to remove any trailing whitespace at the end of each line.

13 files changed, 41 insertions, 36 deletions

diff --git a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
index 7da3bb2f3..97de0555b 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Device_AVR8.h
@@ -54,7 +54,7 @@
 		#include "../StdDescriptors.h"
 		#include "../USBInterrupt.h"
 		#include "../Endpoint.h"
-		
+
 	/* Enable C linkage for C++ Compilers: */
 		#if defined(__cplusplus)
 			extern "C" {
@@ -99,7 +99,7 @@
 			 */
 			#define USB_DEVICE_OPT_FULLSPEED               (0 << 0)
 			//@}
-			
+
 			#if (!defined(NO_INTERNAL_SERIAL) && \
 			     (defined(USB_SERIES_7_AVR) || defined(USB_SERIES_6_AVR) || defined(USB_SERIES_4_AVR) || \
 			      (defined(USB_SERIES_2_AVR) && (!defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__))) || \
@@ -119,7 +119,7 @@
 				 *  model.
 				 */
 				#define INTERNAL_SERIAL_LENGTH_BITS    80
-				
+
 				/** Start address of the internal serial number, in the appropriate address space, if present on the selected microcontroller
 				 *  model.
 				 */
@@ -129,8 +129,8 @@
 
 				#define INTERNAL_SERIAL_LENGTH_BITS    0
 				#define INTERNAL_SERIAL_START_ADDRESS  0
-			#endif			
-			
+			#endif
+
 		/* Function Prototypes: */
 			/** Sends a Remote Wakeup request to the host. This signals to the host that the device should
 			 *  be taken out of suspended mode, and communications should resume.
@@ -221,14 +221,14 @@
 			{
 				return (UDADDR & (1 << ADDEN));
 			}
-		
+
 			#if (USE_INTERNAL_SERIAL != NO_DESCRIPTOR)
 			static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString) ATTR_NON_NULL_PTR_ARG(1);
 			static inline void USB_Device_GetSerialString(uint16_t* const UnicodeString)
 			{
 				uint_reg_t CurrentGlobalInt = GetGlobalInterruptMask();
 				GlobalInterruptDisable();
-				
+
 				uint8_t SigReadAddress = INTERNAL_SERIAL_START_ADDRESS;
 
 				for (uint8_t SerialCharNum = 0; SerialCharNum < (INTERNAL_SERIAL_LENGTH_BITS / 4); SerialCharNum++)
@@ -246,7 +246,7 @@
 					UnicodeString[SerialCharNum] = cpu_to_le16((SerialByte >= 10) ?
 															   (('A' - 10) + SerialByte) : ('0' + SerialByte));
 				}
-				
+
 				SetGlobalInterruptMask(CurrentGlobalInt);
 			}
 			#endif
diff --git a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c
index 09907596b..ff85e0444 100644
--- a/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c
+++ b/LUFA/Drivers/USB/Core/AVR8/EndpointStream_AVR8.c
@@ -268,3 +268,4 @@ uint8_t Endpoint_Null_Stream(uint16_t Length,
 #endif

 

 #endif
+
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c
index 9f7cec15e..218dcf96e 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.c
@@ -52,7 +52,7 @@ bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
 	UECFG1X = UECFG1XData;
 
 	return Endpoint_IsConfigured();
-#else	
+#else
 	for (uint8_t EPNum = Number; EPNum < ENDPOINT_TOTAL_ENDPOINTS; EPNum++)
 	{
 		uint8_t UECFG0XTemp;
@@ -60,7 +60,7 @@ bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
 		uint8_t UEIENXTemp;
 
 		Endpoint_SelectEndpoint(EPNum);
-		
+
 		if (EPNum == Number)
 		{
 			UECFG0XTemp = UECFG0XData;
@@ -84,11 +84,11 @@ bool Endpoint_ConfigureEndpoint_Prv(const uint8_t Number,
 		UECFG0X = UECFG0XTemp;
 		UECFG1X = UECFG1XTemp;
 		UEIENX  = UEIENXTemp;
-			
+
 		if (!(Endpoint_IsConfigured()))
-		  return false;			
+		  return false;
 	}
-	
+
 	Endpoint_SelectEndpoint(Number);
 	return true;
 #endif
@@ -155,7 +155,7 @@ uint8_t Endpoint_WaitUntilReady(void)
 			if (Endpoint_IsOUTReceived())
 			  return ENDPOINT_READYWAIT_NoError;
 		}
-		
+
 		uint8_t USB_DeviceState_LCL = USB_DeviceState;
 
 		if (USB_DeviceState_LCL == DEVICE_STATE_Unattached)
diff --git a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
index 6aff5cc2c..25a07755d 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Endpoint_AVR8.h
@@ -144,7 +144,7 @@
 	#endif
 
 	/* Public Interface - May be used in end-application: */
-		/* Macros: */			
+		/* Macros: */
 			/** \name Endpoint Bank Mode Masks */
 			//@{
 			/** Mask for the bank mode selection for the \ref Endpoint_ConfigureEndpoint() macro. This indicates
diff --git a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c
index 55cd8f991..dde5b1b0f 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Host_AVR8.c
@@ -254,7 +254,7 @@ static void USB_Host_ResetDevice(void)
 	USB_Host_ResetBus();
 	while (!(USB_Host_IsBusResetComplete()));
 	USB_Host_ResumeBus();
-	
+
 	USB_Host_ConfigurationNumber = 0;
 
 	bool HSOFIEnabled = USB_INT_IsEnabled(USB_INT_HSOFI);
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c
index 9484abed3..a484df13b 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.c
@@ -56,7 +56,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number,
 	Pipe_SetInfiniteINRequests();
 
 	return Pipe_IsConfigured();
-#else	
+#else
 	for (uint8_t PNum = Number; PNum < PIPE_TOTAL_PIPES; PNum++)
 	{
 		uint8_t UPCFG0XTemp;
@@ -65,7 +65,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number,
 		uint8_t UPIENXTemp;
 
 		Pipe_SelectPipe(PNum);
-		
+
 		if (PNum == Number)
 		{
 			UPCFG0XTemp = ((Type << EPTYPE0) | Token | ((EndpointNumber & PIPE_EPNUM_MASK) << PEPNUM0));
@@ -83,7 +83,7 @@ bool Pipe_ConfigurePipe(const uint8_t Number,
 
 		if (!(UPCFG1XTemp & (1 << ALLOC)))
 		  continue;
-		  
+
 		Pipe_DisablePipe();
 		UPCFG1X &= ~(1 << ALLOC);
 
@@ -94,12 +94,12 @@ bool Pipe_ConfigurePipe(const uint8_t Number,
 		UPIENX  = UPIENXTemp;
 
 		Pipe_SetInfiniteINRequests();
-	
+
 		if (!(Pipe_IsConfigured()))
-		  return false;		
+		  return false;
 	}
-		
-	Pipe_SelectPipe(Number);	
+
+	Pipe_SelectPipe(Number);
 	return true;
 #endif
 }
diff --git a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
index 277e28290..308bd34e1 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/Pipe_AVR8.h
@@ -139,7 +139,7 @@
 			 */
 			#define PIPE_TOKEN_OUT                  (2 << PTOKEN0)
 			//@}
-			
+
 			/** \name Pipe Bank Mode Masks */
 			//@{
 			/** Mask for the bank mode selection for the \ref Pipe_ConfigurePipe() macro. This indicates that the pipe
@@ -425,7 +425,7 @@
 				                   PIPE_ERRORFLAG_DATATGL)) |
 				        (UPSTAX & (PIPE_ERRORFLAG_OVERFLOW | PIPE_ERRORFLAG_UNDERFLOW)));
 			}
-			
+
 			/** Retrieves the number of busy banks in the currently selected pipe, which have been queued for
 			 *  transmission via the \ref Pipe_ClearOUT() command, or are awaiting acknowledgement via the
 			 *  \ref Pipe_ClearIN() command.
diff --git a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c
index 68f645b89..55d137ba3 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_R.c
@@ -81,3 +81,4 @@ uint8_t TEMPLATE_FUNC_NAME (void* const Buffer,
 #undef TEMPLATE_TRANSFER_BYTE
 
 #endif
+
diff --git a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c
index 5d4fc42f2..36685f0c4 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_Control_W.c
@@ -90,3 +90,4 @@ uint8_t TEMPLATE_FUNC_NAME (const void* const Buffer,
 #undef TEMPLATE_TRANSFER_BYTE
 
 #endif
+
diff --git a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c
index 46b006364..7ed192df7 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Endpoint_RW.c
@@ -86,3 +86,4 @@ uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
 #undef TEMPLATE_BUFFER_MOVE
 
 #endif
+
diff --git a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c
index bc8570d01..daba216ac 100644
--- a/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c
+++ b/LUFA/Drivers/USB/Core/AVR8/Template/Template_Pipe_RW.c
@@ -48,7 +48,7 @@ uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
 		Length -= *BytesProcessed;
 		TEMPLATE_BUFFER_MOVE(DataStream, *BytesProcessed);
 	}
-	
+
 	while (Length)
 	{
 		if (!(Pipe_IsReadWriteAllowed()))
@@ -85,3 +85,4 @@ uint8_t TEMPLATE_FUNC_NAME (TEMPLATE_BUFFER_TYPE const Buffer,
 #undef TEMPLATE_BUFFER_MOVE
 
 #endif
+
diff --git a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c
index 9f688db06..c660fb3ba 100644
--- a/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c
+++ b/LUFA/Drivers/USB/Core/AVR8/USBController_AVR8.c
@@ -162,7 +162,7 @@ void USB_ResetInterface(void)
 		{
 			#if defined(USB_CAN_BE_HOST)
 			USB_PLL_On();
-			while (!(USB_PLL_IsReady()));		
+			while (!(USB_PLL_IsReady()));
 			#endif
 		}
 
@@ -191,7 +191,7 @@ static void USB_Init_Device(void)
 
 	#if !defined(FIXED_CONTROL_ENDPOINT_SIZE)
 	USB_Descriptor_Device_t* DeviceDescriptorPtr;
-	
+
 	#if defined(ARCH_HAS_MULTI_ADDRESS_SPACE) && \
 	    !(defined(USE_FLASH_DESCRIPTORS) || defined(USE_EEPROM_DESCRIPTORS) || defined(USE_RAM_DESCRIPTORS))
 	uint8_t DescriptorAddressSpace;
@@ -215,7 +215,7 @@ static void USB_Init_Device(void)
 		#else
 		USB_Device_ControlEndpointSize = pgm_read_byte(&DeviceDescriptorPtr->Endpoint0Size);
 		#endif
-	}	
+	}
 	#endif
 	#endif
 
@@ -255,7 +255,7 @@ static void USB_Init_Host(void)
 
 	USB_INT_Enable(USB_INT_SRPI);
 	USB_INT_Enable(USB_INT_BCERRI);
-	
+
 	USB_Attach();
 }
 #endif
diff --git a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h
index 6115ec6e3..dad55f101 100644
--- a/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h
+++ b/LUFA/Drivers/USB/Core/AVR8/USBInterrupt_AVR8.h
@@ -136,7 +136,7 @@
 						OTGIEN |= (1 << VBERRE);
 						break;
 					case USB_INT_SRPI:
-						OTGIEN |= (1 << SRPE);						
+						OTGIEN |= (1 << SRPE);
 						break;
 					#endif
 				}
@@ -194,12 +194,12 @@
 						OTGIEN &= ~(1 << VBERRE);
 						break;
 					case USB_INT_SRPI:
-						OTGIEN &= ~(1 << SRPE);						
+						OTGIEN &= ~(1 << SRPE);
 						break;
 					#endif
 				}
 			}
-			
+
 			static inline void USB_INT_Clear(const uint8_t Interrupt) ATTR_ALWAYS_INLINE;
 			static inline void USB_INT_Clear(const uint8_t Interrupt)
 			{
@@ -257,7 +257,7 @@
 					#endif
 				}
 			}
-			
+
 			static inline bool USB_INT_IsEnabled(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
 			static inline bool USB_INT_IsEnabled(const uint8_t Interrupt)
 			{
@@ -300,10 +300,10 @@
 						return (OTGIEN & (1 << SRPE));
 					#endif
 				}
-				
+
 				return false;
 			}
-		
+
 			static inline bool USB_INT_HasOccurred(const uint8_t Interrupt) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
 			static inline bool USB_INT_HasOccurred(const uint8_t Interrupt)
 			{