Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

1 files changed, 185 insertions, 185 deletions

diff --git a/LUFA/Drivers/Peripheral/SPI.h b/LUFA/Drivers/Peripheral/SPI.h
index 041c0788e..9e6475351 100644
--- a/LUFA/Drivers/Peripheral/SPI.h
+++ b/LUFA/Drivers/Peripheral/SPI.h
@@ -1,185 +1,185 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/** \file

- *  \brief Master include file for the SPI peripheral driver.

- *

- *  Hardware SPI subsystem driver for the supported USB AVRs models.

- */

-

-/** \ingroup Group_PeripheralDrivers

- *  @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h

- *

- *  \section Sec_Dependencies Module Source Dependencies

- *  The following files must be built with any user project that uses this module:

- *    - None

- *

- *  \section Module Description

- *  Driver for the hardware SPI port available on most AVR models. This module provides

- *  an easy to use driver for the setup of and transfer of data over the AVR's SPI port.

- *

- *  @{

- */

-

-#ifndef __SPI_H__

-#define __SPI_H__

-

-	/* Includes: */

-		#include <stdbool.h>

-

-	/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Private Interface - For use in library only: */

-	#if !defined(__DOXYGEN__)

-		/* Macros: */

-			#define SPI_USE_DOUBLESPEED            (1 << SPE)

-	#endif

-	

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 2. */

-			#define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 4. */

-			#define SPI_SPEED_FCPU_DIV_4           0

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 8. */

-			#define SPI_SPEED_FCPU_DIV_8           (SPI_USE_DOUBLESPEED | (1 << SPR0))

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 16. */

-			#define SPI_SPEED_FCPU_DIV_16          (1 << SPR0)

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 32. */

-			#define SPI_SPEED_FCPU_DIV_32          (SPI_USE_DOUBLESPEED | (1 << SPR1))

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 64. */

-			#define SPI_SPEED_FCPU_DIV_64          (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0))

-

-			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */

-			#define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))

-			

-			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */

-			#define SPI_SCK_LEAD_RISING            (0 << CPOL)

-

-			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */

-			#define SPI_SCK_LEAD_FALLING           (1 << CPOL)

-

-			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */

-			#define SPI_SAMPLE_LEADING             (0 << CPHA)

-

-			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */

-			#define SPI_SAMPLE_TRAILING            (1 << CPHA)

-			

-			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */

-			#define SPI_MODE_SLAVE                 (0 << MSTR)

-

-			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */

-			#define SPI_MODE_MASTER                (1 << MSTR)

-

-		/* Inline Functions: */

-			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other

-			 *  SPI routines.

-			 *

-			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the SPI_SPEED_*,

-			 *                         SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks

-			 */

-			static inline void SPI_Init(const uint8_t SPIOptions)

-			{

-				DDRB  |= ((1 << 1) | (1 << 2));

-				PORTB |= ((1 << 0) | (1 << 3));

-				

-				SPCR   = ((1 << SPE) | SPIOptions);

-				

-				if (SPIOptions & SPI_USE_DOUBLESPEED)

-				  SPSR |= (1 << SPI2X);

-				else

-				  SPSR &= ~(1 << SPI2X);

-			}

-			

-			/** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */

-			static inline void SPI_ShutDown(void)

-			{

-				DDRB  &= ~((1 << 1) | (1 << 2));

-				PORTB &= ~((1 << 0) | (1 << 3));

-				

-				SPCR   = 0;

-				SPSR   = 0;

-			}

-			

-			/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.

-			 *

-			 *  \param[in] Byte  Byte to send through the SPI interface

-			 *

-			 *  \return Response byte from the attached SPI device

-			 */

-			static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;

-			static inline uint8_t SPI_TransferByte(const uint8_t Byte)

-			{

-				SPDR = Byte;

-				while (!(SPSR & (1 << SPIF)));

-				return SPDR;

-			}

-

-			/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response

-			 *  byte sent to from the attached SPI device is ignored.

-			 *

-			 *  \param[in] Byte Byte to send through the SPI interface

-			 */

-			static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;

-			static inline void SPI_SendByte(const uint8_t Byte)

-			{

-				SPDR = Byte;

-				while (!(SPSR & (1 << SPIF)));

-			}

-

-			/** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response

-			 *  byte from the attached SPI device is returned.

-			 *

-			 *  \return The response byte from the attached SPI device

-			 */

-			static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;

-			static inline uint8_t SPI_ReceiveByte(void)

-			{

-				SPDR = 0x00;

-				while (!(SPSR & (1 << SPIF)));

-				return SPDR;

-			}

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-		

-#endif

-

-/** @} */

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/** \file
+ *  \brief Master include file for the SPI peripheral driver.
+ *
+ *  Hardware SPI subsystem driver for the supported USB AVRs models.
+ */
+
+/** \ingroup Group_PeripheralDrivers
+ *  @defgroup Group_SPI SPI Driver - LUFA/Drivers/Peripheral/SPI.h
+ *
+ *  \section Sec_Dependencies Module Source Dependencies
+ *  The following files must be built with any user project that uses this module:
+ *    - None
+ *
+ *  \section Module Description
+ *  Driver for the hardware SPI port available on most AVR models. This module provides
+ *  an easy to use driver for the setup of and transfer of data over the AVR's SPI port.
+ *
+ *  @{
+ */
+
+#ifndef __SPI_H__
+#define __SPI_H__
+
+	/* Includes: */
+		#include <stdbool.h>
+
+	/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Private Interface - For use in library only: */
+	#if !defined(__DOXYGEN__)
+		/* Macros: */
+			#define SPI_USE_DOUBLESPEED            (1 << SPE)
+	#endif
+	
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 2. */
+			#define SPI_SPEED_FCPU_DIV_2           SPI_USE_DOUBLESPEED
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 4. */
+			#define SPI_SPEED_FCPU_DIV_4           0
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 8. */
+			#define SPI_SPEED_FCPU_DIV_8           (SPI_USE_DOUBLESPEED | (1 << SPR0))
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 16. */
+			#define SPI_SPEED_FCPU_DIV_16          (1 << SPR0)
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 32. */
+			#define SPI_SPEED_FCPU_DIV_32          (SPI_USE_DOUBLESPEED | (1 << SPR1))
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 64. */
+			#define SPI_SPEED_FCPU_DIV_64          (SPI_USE_DOUBLESPEED | (1 << SPR1) | (1 << SPR0))
+
+			/** SPI prescaler mask for SPI_Init(). Divides the system clock by a factor of 128. */
+			#define SPI_SPEED_FCPU_DIV_128         ((1 << SPR1) | (1 << SPR0))
+			
+			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the rising edge. */
+			#define SPI_SCK_LEAD_RISING            (0 << CPOL)
+
+			/** SPI clock polarity mask for SPI_Init(). Indicates that the SCK should lead on the falling edge. */
+			#define SPI_SCK_LEAD_FALLING           (1 << CPOL)
+
+			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should sampled on the leading edge. */
+			#define SPI_SAMPLE_LEADING             (0 << CPHA)
+
+			/** SPI data sample mode mask for SPI_Init(). Indicates that the data should be sampled on the trailing edge. */
+			#define SPI_SAMPLE_TRAILING            (1 << CPHA)
+			
+			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into slave mode. */
+			#define SPI_MODE_SLAVE                 (0 << MSTR)
+
+			/** SPI mode mask for SPI_Init(). Indicates that the SPI interface should be initialized into master mode. */
+			#define SPI_MODE_MASTER                (1 << MSTR)
+
+		/* Inline Functions: */
+			/** Initializes the SPI subsystem, ready for transfers. Must be called before calling any other
+			 *  SPI routines.
+			 *
+			 *  \param[in] SPIOptions  SPI Options, a mask consisting of one of each of the SPI_SPEED_*,
+			 *                         SPI_SCK_*, SPI_SAMPLE_* and SPI_MODE_* masks
+			 */
+			static inline void SPI_Init(const uint8_t SPIOptions)
+			{
+				DDRB  |= ((1 << 1) | (1 << 2));
+				PORTB |= ((1 << 0) | (1 << 3));
+				
+				SPCR   = ((1 << SPE) | SPIOptions);
+				
+				if (SPIOptions & SPI_USE_DOUBLESPEED)
+				  SPSR |= (1 << SPI2X);
+				else
+				  SPSR &= ~(1 << SPI2X);
+			}
+			
+			/** Turns off the SPI driver, disabling and returning used hardware to their default configuration. */
+			static inline void SPI_ShutDown(void)
+			{
+				DDRB  &= ~((1 << 1) | (1 << 2));
+				PORTB &= ~((1 << 0) | (1 << 3));
+				
+				SPCR   = 0;
+				SPSR   = 0;
+			}
+			
+			/** Sends and receives a byte through the SPI interface, blocking until the transfer is complete.
+			 *
+			 *  \param[in] Byte  Byte to send through the SPI interface
+			 *
+			 *  \return Response byte from the attached SPI device
+			 */
+			static inline uint8_t SPI_TransferByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
+			static inline uint8_t SPI_TransferByte(const uint8_t Byte)
+			{
+				SPDR = Byte;
+				while (!(SPSR & (1 << SPIF)));
+				return SPDR;
+			}
+
+			/** Sends a byte through the SPI interface, blocking until the transfer is complete. The response
+			 *  byte sent to from the attached SPI device is ignored.
+			 *
+			 *  \param[in] Byte Byte to send through the SPI interface
+			 */
+			static inline void SPI_SendByte(const uint8_t Byte) ATTR_ALWAYS_INLINE;
+			static inline void SPI_SendByte(const uint8_t Byte)
+			{
+				SPDR = Byte;
+				while (!(SPSR & (1 << SPIF)));
+			}
+
+			/** Sends a dummy byte through the SPI interface, blocking until the transfer is complete. The response
+			 *  byte from the attached SPI device is returned.
+			 *
+			 *  \return The response byte from the attached SPI device
+			 */
+			static inline uint8_t SPI_ReceiveByte(void) ATTR_ALWAYS_INLINE ATTR_WARN_UNUSED_RESULT;
+			static inline uint8_t SPI_ReceiveByte(void)
+			{
+				SPDR = 0x00;
+				while (!(SPSR & (1 << SPIF)));
+				return SPDR;
+			}
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+		
+#endif
+
+/** @} */