Add svn:eol-style property to source files, so that the line endings are correctly converted to the target system's native end of line style.

4 files changed, 423 insertions, 423 deletions

diff --git a/LUFA/DriverStubs/Buttons.h b/LUFA/DriverStubs/Buttons.h
index deab56e9e..c92577a44 100644
--- a/LUFA/DriverStubs/Buttons.h
+++ b/LUFA/DriverStubs/Buttons.h
@@ -1,85 +1,85 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/*

-   This is a stub driver header file, for implementing custom board

-   layout hardware with compatible LUFA board specific drivers. If

-   the library is configured to use the BOARD_USER board mode, this

-   driver file should be completed and copied into the "/Board/" folder

-   inside the application's folder.

-

-   This stub is for the board-specific component of the LUFA Buttons driver,

-   for the control of physical board-mounted GPIO pushbuttons.

-*/

- 

-#ifndef __BUTTONS_USER_H__

-#define __BUTTONS_USER_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-		#include <stdbool.h>

-

-		// TODO: Add any required includes here

-

-	/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_BUTTONS_H)

-			#error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.

-		#endif

-		

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** Button mask for the first button on the board. */

-			#define BUTTONS_BUTTON1          // TODO: Add mask for first board button here

-	

-		/* Inline Functions: */

-		#if !defined(__DOXYGEN__)

-			static inline void Buttons_Init(void)

-			{

-				// TODO: Initialize the appropriate port pins as an inputs here, with pull-ups

-			}

-

-			static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;

-			static inline uint8_t Buttons_GetStatus(void)

-			{

-				// TODO: Return current button status here, debounced if required

-			}

-		#endif

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-			

-#endif

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/*
+   This is a stub driver header file, for implementing custom board
+   layout hardware with compatible LUFA board specific drivers. If
+   the library is configured to use the BOARD_USER board mode, this
+   driver file should be completed and copied into the "/Board/" folder
+   inside the application's folder.
+
+   This stub is for the board-specific component of the LUFA Buttons driver,
+   for the control of physical board-mounted GPIO pushbuttons.
+*/
+ 
+#ifndef __BUTTONS_USER_H__
+#define __BUTTONS_USER_H__
+
+	/* Includes: */
+		#include <avr/io.h>
+		#include <stdbool.h>
+
+		// TODO: Add any required includes here
+
+	/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_BUTTONS_H)
+			#error Do not include this file directly. Include LUFA/Drivers/Board/Buttons.h instead.
+		#endif
+		
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** Button mask for the first button on the board. */
+			#define BUTTONS_BUTTON1          // TODO: Add mask for first board button here
+	
+		/* Inline Functions: */
+		#if !defined(__DOXYGEN__)
+			static inline void Buttons_Init(void)
+			{
+				// TODO: Initialize the appropriate port pins as an inputs here, with pull-ups
+			}
+
+			static inline uint8_t Buttons_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
+			static inline uint8_t Buttons_GetStatus(void)
+			{
+				// TODO: Return current button status here, debounced if required
+			}
+		#endif
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+			
+#endif
diff --git a/LUFA/DriverStubs/Dataflash.h b/LUFA/DriverStubs/Dataflash.h
index 10eafa2a3..d00d3ef6e 100644
--- a/LUFA/DriverStubs/Dataflash.h
+++ b/LUFA/DriverStubs/Dataflash.h
@@ -1,117 +1,117 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/*

-   This is a stub driver header file, for implementing custom board

-   layout hardware with compatible LUFA board specific drivers. If

-   the library is configured to use the BOARD_USER board mode, this

-   driver file should be completed and copied into the "/Board/" folder

-   inside the application's folder.

-

-   This stub is for the board-specific component of the LUFA Dataflash

-   driver.

-*/

-

-#ifndef __DATAFLASH_USER_H__

-#define __DATAFLASH_USER_H__

-

-	/* Includes: */

-		// TODO: Add any required includes here

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_DATAFLASH_H)

-			#error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.

-		#endif

-		

-	/* Private Interface - For use in library only: */

-	#if !defined(__DOXYGEN__)

-		/* Macros: */

-			#define DATAFLASH_CHIPCS_MASK                // TODO: Replace this with a mask of all the /CS pins of all dataflashes

-			#define DATAFLASH_CHIPCS_DDR                 // TODO: Replace with the DDR register name for the board's Dataflash ICs

-			#define DATAFLASH_CHIPCS_PORT                // TODO: Replace with the PORT register name for the board's Dataflash ICs

-	#endif

-	

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** Constant indicating the total number of dataflash ICs mounted on the selected board. */

-			#define DATAFLASH_TOTALCHIPS                 // TODO: Replace with the number of dataflashes on the board, max 2

-

-			/** Mask for no dataflash chip selected. */

-			#define DATAFLASH_NO_CHIP                    DATAFLASH_CHIPCS_MASK

-

-			/** Mask for the first dataflash chip selected. */

-			#define DATAFLASH_CHIP1                      // TODO: Replace with mask to select the first Dataflash chip

-

-			/** Mask for the second dataflash chip selected. */

-			#define DATAFLASH_CHIP2                      // TODO: Replace with mask to select the second Dataflash chip, if available

-			

-			/** Internal main memory page size for the board's dataflash ICs. */

-			#define DATAFLASH_PAGE_SIZE                  // TODO: Replace with the page size for the Dataflash ICs

-

-			/** Total number of pages inside each of the board's dataflash ICs. */

-			#define DATAFLASH_PAGES                      // TODO: Replace with the total number of pages inside one of the Dataflash ICs

-

-		/* Inline Functions: */

-			/** Selects a dataflash IC from the given page number, which should range from 0 to

-			 *  ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one

-			 *  dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside

-			 *  the total number of pages contained in the boards dataflash ICs, all dataflash ICs

-			 *  are deselected.

-			 *

-			 *  \param[in] PageAddress  Address of the page to manipulate, ranging from

-			 *                          ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).

-			 */

-			static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)

-			{

-				Dataflash_DeselectChip();

-				

-				if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))

-				  return;

-

-				// TODO: If more than one dataflash chip, select the correct chip from the page address here

-				Dataflash_SelectChip(DATAFLASH_CHIP1);

-			}

-

-			/** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with

-			 *  dataflash commands which require a complete 24-byte address.

-			 *

-			 *  \param[in] PageAddress  Page address within the selected dataflash IC

-			 *  \param[in] BufferByte   Address within the dataflash's buffer

-			 */

-			static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, const uint16_t BufferByte)

-			{	

-				// TODO: If more than one dataflash chip, adjust absolute page address to be correct for the current chip,

-				//       also the shifts may need to be altered to suit the dataflash model being used				

-				Dataflash_SendByte(PageAddress >> 5);

-				Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));

-				Dataflash_SendByte(BufferByte);

-			}

-			

-#endif

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/*
+   This is a stub driver header file, for implementing custom board
+   layout hardware with compatible LUFA board specific drivers. If
+   the library is configured to use the BOARD_USER board mode, this
+   driver file should be completed and copied into the "/Board/" folder
+   inside the application's folder.
+
+   This stub is for the board-specific component of the LUFA Dataflash
+   driver.
+*/
+
+#ifndef __DATAFLASH_USER_H__
+#define __DATAFLASH_USER_H__
+
+	/* Includes: */
+		// TODO: Add any required includes here
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_DATAFLASH_H)
+			#error Do not include this file directly. Include LUFA/Drivers/Board/Dataflash.h instead.
+		#endif
+		
+	/* Private Interface - For use in library only: */
+	#if !defined(__DOXYGEN__)
+		/* Macros: */
+			#define DATAFLASH_CHIPCS_MASK                // TODO: Replace this with a mask of all the /CS pins of all dataflashes
+			#define DATAFLASH_CHIPCS_DDR                 // TODO: Replace with the DDR register name for the board's Dataflash ICs
+			#define DATAFLASH_CHIPCS_PORT                // TODO: Replace with the PORT register name for the board's Dataflash ICs
+	#endif
+	
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** Constant indicating the total number of dataflash ICs mounted on the selected board. */
+			#define DATAFLASH_TOTALCHIPS                 // TODO: Replace with the number of dataflashes on the board, max 2
+
+			/** Mask for no dataflash chip selected. */
+			#define DATAFLASH_NO_CHIP                    DATAFLASH_CHIPCS_MASK
+
+			/** Mask for the first dataflash chip selected. */
+			#define DATAFLASH_CHIP1                      // TODO: Replace with mask to select the first Dataflash chip
+
+			/** Mask for the second dataflash chip selected. */
+			#define DATAFLASH_CHIP2                      // TODO: Replace with mask to select the second Dataflash chip, if available
+			
+			/** Internal main memory page size for the board's dataflash ICs. */
+			#define DATAFLASH_PAGE_SIZE                  // TODO: Replace with the page size for the Dataflash ICs
+
+			/** Total number of pages inside each of the board's dataflash ICs. */
+			#define DATAFLASH_PAGES                      // TODO: Replace with the total number of pages inside one of the Dataflash ICs
+
+		/* Inline Functions: */
+			/** Selects a dataflash IC from the given page number, which should range from 0 to
+			 *  ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1). For boards containing only one
+			 *  dataflash IC, this will select DATAFLASH_CHIP1. If the given page number is outside
+			 *  the total number of pages contained in the boards dataflash ICs, all dataflash ICs
+			 *  are deselected.
+			 *
+			 *  \param[in] PageAddress  Address of the page to manipulate, ranging from
+			 *                          ((DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS) - 1).
+			 */
+			static inline void Dataflash_SelectChipFromPage(const uint16_t PageAddress)
+			{
+				Dataflash_DeselectChip();
+				
+				if (PageAddress >= (DATAFLASH_PAGES * DATAFLASH_TOTALCHIPS))
+				  return;
+
+				// TODO: If more than one dataflash chip, select the correct chip from the page address here
+				Dataflash_SelectChip(DATAFLASH_CHIP1);
+			}
+
+			/** Sends a set of page and buffer address bytes to the currently selected dataflash IC, for use with
+			 *  dataflash commands which require a complete 24-byte address.
+			 *
+			 *  \param[in] PageAddress  Page address within the selected dataflash IC
+			 *  \param[in] BufferByte   Address within the dataflash's buffer
+			 */
+			static inline void Dataflash_SendAddressBytes(uint16_t PageAddress, const uint16_t BufferByte)
+			{	
+				// TODO: If more than one dataflash chip, adjust absolute page address to be correct for the current chip,
+				//       also the shifts may need to be altered to suit the dataflash model being used				
+				Dataflash_SendByte(PageAddress >> 5);
+				Dataflash_SendByte((PageAddress << 3) | (BufferByte >> 8));
+				Dataflash_SendByte(BufferByte);
+			}
+			
+#endif
diff --git a/LUFA/DriverStubs/Joystick.h b/LUFA/DriverStubs/Joystick.h
index 21e306f1e..4e7040a42 100644
--- a/LUFA/DriverStubs/Joystick.h
+++ b/LUFA/DriverStubs/Joystick.h
@@ -1,97 +1,97 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/*

-   This is a stub driver header file, for implementing custom board

-   layout hardware with compatible LUFA board specific drivers. If

-   the library is configured to use the BOARD_USER board mode, this

-   driver file should be completed and copied into the "/Board/" folder

-   inside the application's folder.

-

-   This stub is for the board-specific component of the LUFA Joystick

-   driver, a small surface mount four-way (plus button) digital joystick

-   on most USB AVR boards.

-*/

- 

-#ifndef __JOYSTICK_USER_H__

-#define __JOYSTICK_USER_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-

-		// TODO: Add any required includes here

-

-	/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_JOYSTICK_H)

-			#error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.

-		#endif

-	

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** Mask for the joystick being pushed in the left direction. */

-			#define JOY_LEFT                  // TODO: Add mask to indicate joystick left position here

-

-			/** Mask for the joystick being pushed in the right direction. */

-			#define JOY_RIGHT                 // TODO: Add mask to indicate joystick right position here

-

-			/** Mask for the joystick being pushed in the upward direction. */

-			#define JOY_UP                    // TODO: Add mask to indicate joystick up position here

-

-			/** Mask for the joystick being pushed in the downward direction. */

-			#define JOY_DOWN                  // TODO: Add mask to indicate joystick down position here

-

-			/** Mask for the joystick being pushed inward. */

-			#define JOY_PRESS                 // TODO: Add mask to indicate joystick pressed position here

-			

-		/* Inline Functions: */

-		#if !defined(__DOXYGEN__)

-			static inline void Joystick_Init(void)

-			{

-				// TODO: Initialize joystick port pins as inputs with pull-ups

-			}

-			

-			static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;

-			static inline uint8_t Joystick_GetStatus(void)

-			{

-				// TODO: Return current joystick position data which can be obtained by masking against the JOY_* macros

-			}

-		#endif

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-

-#endif

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/*
+   This is a stub driver header file, for implementing custom board
+   layout hardware with compatible LUFA board specific drivers. If
+   the library is configured to use the BOARD_USER board mode, this
+   driver file should be completed and copied into the "/Board/" folder
+   inside the application's folder.
+
+   This stub is for the board-specific component of the LUFA Joystick
+   driver, a small surface mount four-way (plus button) digital joystick
+   on most USB AVR boards.
+*/
+ 
+#ifndef __JOYSTICK_USER_H__
+#define __JOYSTICK_USER_H__
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		// TODO: Add any required includes here
+
+	/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_JOYSTICK_H)
+			#error Do not include this file directly. Include LUFA/Drivers/Board/Joystick.h instead.
+		#endif
+	
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** Mask for the joystick being pushed in the left direction. */
+			#define JOY_LEFT                  // TODO: Add mask to indicate joystick left position here
+
+			/** Mask for the joystick being pushed in the right direction. */
+			#define JOY_RIGHT                 // TODO: Add mask to indicate joystick right position here
+
+			/** Mask for the joystick being pushed in the upward direction. */
+			#define JOY_UP                    // TODO: Add mask to indicate joystick up position here
+
+			/** Mask for the joystick being pushed in the downward direction. */
+			#define JOY_DOWN                  // TODO: Add mask to indicate joystick down position here
+
+			/** Mask for the joystick being pushed inward. */
+			#define JOY_PRESS                 // TODO: Add mask to indicate joystick pressed position here
+			
+		/* Inline Functions: */
+		#if !defined(__DOXYGEN__)
+			static inline void Joystick_Init(void)
+			{
+				// TODO: Initialize joystick port pins as inputs with pull-ups
+			}
+			
+			static inline uint8_t Joystick_GetStatus(void) ATTR_WARN_UNUSED_RESULT;
+			static inline uint8_t Joystick_GetStatus(void)
+			{
+				// TODO: Return current joystick position data which can be obtained by masking against the JOY_* macros
+			}
+		#endif
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+
+#endif
diff --git a/LUFA/DriverStubs/LEDs.h b/LUFA/DriverStubs/LEDs.h
index 6bdc847d1..3d70211b3 100644
--- a/LUFA/DriverStubs/LEDs.h
+++ b/LUFA/DriverStubs/LEDs.h
@@ -1,124 +1,124 @@
-/*

-             LUFA Library

-     Copyright (C) Dean Camera, 2010.

-              

-  dean [at] fourwalledcubicle [dot] com

-      www.fourwalledcubicle.com

-*/

-

-/*

-  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)

-

-  Permission to use, copy, modify, distribute, and sell this 

-  software and its documentation for any purpose is hereby granted

-  without fee, provided that the above copyright notice appear in 

-  all copies and that both that the copyright notice and this

-  permission notice and warranty disclaimer appear in supporting 

-  documentation, and that the name of the author not be used in 

-  advertising or publicity pertaining to distribution of the 

-  software without specific, written prior permission.

-

-  The author disclaim all warranties with regard to this

-  software, including all implied warranties of merchantability

-  and fitness.  In no event shall the author be liable for any

-  special, indirect or consequential damages or any damages

-  whatsoever resulting from loss of use, data or profits, whether

-  in an action of contract, negligence or other tortious action,

-  arising out of or in connection with the use or performance of

-  this software.

-*/

-

-/*

-   This is a stub driver header file, for implementing custom board

-   layout hardware with compatible LUFA board specific drivers. If

-   the library is configured to use the BOARD_USER board mode, this

-   driver file should be completed and copied into the "/Board/" folder

-   inside the application's folder.

-

-   This stub is for the board-specific component of the LUFA LEDs driver,

-   for the LEDs (up to four) mounted on most USB AVR boards.

-*/

-

-#ifndef __LEDS_USER_H__

-#define __LEDS_USER_H__

-

-	/* Includes: */

-		#include <avr/io.h>

-

-		// TODO: Add any required includes here

-

-/* Enable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			extern "C" {

-		#endif

-

-	/* Preprocessor Checks: */

-		#if !defined(__INCLUDE_FROM_LEDS_H)

-			#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.

-		#endif

-

-	/* Public Interface - May be used in end-application: */

-		/* Macros: */

-			/** LED mask for the first LED on the board. */

-			#define LEDS_LED1        // TODO: Add mask for first board LED here

-

-			/** LED mask for the second LED on the board. */

-			#define LEDS_LED2        // TODO: Add mask for second board LED here

-

-			/** LED mask for the third LED on the board. */

-			#define LEDS_LED3        // TODO: Add mask for third board LED here

-

-			/** LED mask for the fourth LED on the board. */

-			#define LEDS_LED4        // TODO: Add mask for fourth board LED here

-

-			/** LED mask for all the LEDs on the board. */

-			#define LEDS_ALL_LEDS    (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)

-

-			/** LED mask for the none of the board LEDs */

-			#define LEDS_NO_LEDS     0

-

-		/* Inline Functions: */

-		#if !defined(__DOXYGEN__)

-			static inline void LEDs_Init(void)

-			{

-				// TODO: Add code to initialize LED port pins as outputs here

-			}

-			

-			static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)

-			{

-				// TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is

-			}

-

-			static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)

-			{

-				// TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is

-			}

-

-			static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)

-			{

-				// TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off

-			}

-			

-			static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)

-			{

-				// TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here

-			}

-

-			static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)

-			{

-				// TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others

-			}

-			

-			static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;

-			static inline uint8_t LEDs_GetLEDs(void)

-			{

-				// TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros

-			}

-		#endif

-

-	/* Disable C linkage for C++ Compilers: */

-		#if defined(__cplusplus)

-			}

-		#endif

-		

-#endif

+/*
+             LUFA Library
+     Copyright (C) Dean Camera, 2010.
+              
+  dean [at] fourwalledcubicle [dot] com
+      www.fourwalledcubicle.com
+*/
+
+/*
+  Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
+
+  Permission to use, copy, modify, distribute, and sell this 
+  software and its documentation for any purpose is hereby granted
+  without fee, provided that the above copyright notice appear in 
+  all copies and that both that the copyright notice and this
+  permission notice and warranty disclaimer appear in supporting 
+  documentation, and that the name of the author not be used in 
+  advertising or publicity pertaining to distribution of the 
+  software without specific, written prior permission.
+
+  The author disclaim all warranties with regard to this
+  software, including all implied warranties of merchantability
+  and fitness.  In no event shall the author be liable for any
+  special, indirect or consequential damages or any damages
+  whatsoever resulting from loss of use, data or profits, whether
+  in an action of contract, negligence or other tortious action,
+  arising out of or in connection with the use or performance of
+  this software.
+*/
+
+/*
+   This is a stub driver header file, for implementing custom board
+   layout hardware with compatible LUFA board specific drivers. If
+   the library is configured to use the BOARD_USER board mode, this
+   driver file should be completed and copied into the "/Board/" folder
+   inside the application's folder.
+
+   This stub is for the board-specific component of the LUFA LEDs driver,
+   for the LEDs (up to four) mounted on most USB AVR boards.
+*/
+
+#ifndef __LEDS_USER_H__
+#define __LEDS_USER_H__
+
+	/* Includes: */
+		#include <avr/io.h>
+
+		// TODO: Add any required includes here
+
+/* Enable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			extern "C" {
+		#endif
+
+	/* Preprocessor Checks: */
+		#if !defined(__INCLUDE_FROM_LEDS_H)
+			#error Do not include this file directly. Include LUFA/Drivers/Board/LEDS.h instead.
+		#endif
+
+	/* Public Interface - May be used in end-application: */
+		/* Macros: */
+			/** LED mask for the first LED on the board. */
+			#define LEDS_LED1        // TODO: Add mask for first board LED here
+
+			/** LED mask for the second LED on the board. */
+			#define LEDS_LED2        // TODO: Add mask for second board LED here
+
+			/** LED mask for the third LED on the board. */
+			#define LEDS_LED3        // TODO: Add mask for third board LED here
+
+			/** LED mask for the fourth LED on the board. */
+			#define LEDS_LED4        // TODO: Add mask for fourth board LED here
+
+			/** LED mask for all the LEDs on the board. */
+			#define LEDS_ALL_LEDS    (LEDS_LED1 | LEDS_LED2 | LEDS_LED3 | LEDS_LED4)
+
+			/** LED mask for the none of the board LEDs */
+			#define LEDS_NO_LEDS     0
+
+		/* Inline Functions: */
+		#if !defined(__DOXYGEN__)
+			static inline void LEDs_Init(void)
+			{
+				// TODO: Add code to initialize LED port pins as outputs here
+			}
+			
+			static inline void LEDs_TurnOnLEDs(const uint8_t LEDMask)
+			{
+				// TODO: Add code to turn on LEDs given in the LEDMask mask here, leave others as-is
+			}
+
+			static inline void LEDs_TurnOffLEDs(const uint8_t LEDMask)
+			{
+				// TODO: Add code to turn off LEDs given in the LEDMask mask here, leave others as-is
+			}
+
+			static inline void LEDs_SetAllLEDs(const uint8_t LEDMask)
+			{
+				// TODO: Add code to turn on only LEDs given in the LEDMask mask here, all others off
+			}
+			
+			static inline void LEDs_ChangeLEDs(const uint8_t LEDMask, const uint8_t ActiveMask)
+			{
+				// TODO: Add code to set the Leds in the given LEDMask to the status given in ActiveMask here
+			}
+
+			static inline void LEDs_ToggleLEDs(const uint8_t LEDMask)
+			{
+				// TODO: Add code to toggle the Leds in the given LEDMask, ignoring all others
+			}
+			
+			static inline uint8_t LEDs_GetLEDs(void) ATTR_WARN_UNUSED_RESULT;
+			static inline uint8_t LEDs_GetLEDs(void)
+			{
+				// TODO: Add code to return the current LEDs status' here which can be masked against LED_LED* macros
+			}
+		#endif
+
+	/* Disable C linkage for C++ Compilers: */
+		#if defined(__cplusplus)
+			}
+		#endif
+		
+#endif