Clean up excessive whitespace at the end of each line using the wspurify tool made by Laszlo Monda

4 files changed, 65 insertions, 61 deletions

diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
index d02424c7b..7948e2c49 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.c
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -33,7 +33,7 @@
  *  Main source file for the MouseHostWithParser demo. This file contains the main tasks of
  *  the demo and is responsible for the initial application hardware configuration.
  */
- 
+
 #include "MouseHostWithParser.h"
 
 /** Processed HID report descriptor items structure, containing information on each HID report element */
@@ -52,14 +52,14 @@ USB_ClassInfo_HID_Host_t Mouse_HID_Interface =
 
 				.DataOUTPipeNumber      = 2,
 				.DataOUTPipeDoubleBank  = false,
-				
+
 				.HIDInterfaceProtocol   = HID_BOOTP_NonBootProtocol,
-				
+
 				.HIDParserData          = &HIDReportInfo
 			},
 	};
 
-	
+
 /** Main program entry point. This routine configures the hardware required by the application, then
  *  enters a loop to run the application tasks in sequence.
  */
@@ -78,7 +78,7 @@ int main(void)
 		{
 			case HOST_STATE_Addressed:
 				LEDs_SetAllLEDs(LEDMASK_USB_ENUMERATING);
-			
+
 				uint16_t ConfigDescriptorSize;
 				uint8_t  ConfigDescriptorData[512];
 
@@ -99,7 +99,7 @@ int main(void)
 					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
 					break;
 				}
-				
+
 				if (USB_Host_SetDeviceConfiguration(1) != HOST_SENDCONTROL_Successful)
 				{
 					puts_P(PSTR("Error Setting Device Configuration.\r\n"));
@@ -115,7 +115,7 @@ int main(void)
 					USB_HostState = HOST_STATE_WaitForDeviceRemoval;
 					break;
 				}
-				
+
 				puts_P(PSTR("Mouse Enumerated.\r\n"));
 				LEDs_SetAllLEDs(LEDMASK_USB_READY);
 				USB_HostState = HOST_STATE_Configured;
@@ -131,11 +131,11 @@ int main(void)
 					for (uint8_t ReportNumber = 0; ReportNumber < HIDReportInfo.TotalReportItems; ReportNumber++)
 					{
 						HID_ReportItem_t* ReportItem = &HIDReportInfo.ReportItems[ReportNumber];
-						
+
 						/* Update the report item value if it is contained within the current report */
 						if (!(USB_GetHIDReportItemInfo(MouseReport, ReportItem)))
 						  continue;
-						
+
 						/* Determine what report item is being tested, process updated value as needed */
 						if ((ReportItem->Attributes.Usage.Page        == USAGE_PAGE_BUTTON) &&
 							(ReportItem->ItemType                     == HID_REPORT_ITEM_In))
@@ -148,7 +148,7 @@ int main(void)
 								 (ReportItem->ItemType                == HID_REPORT_ITEM_In))
 						{
 							int16_t WheelDelta = HID_ALIGN_DATA(ReportItem, int16_t);
-							
+
 							if (WheelDelta)
 							  LEDMask = (LEDS_LED1 | LEDS_LED2 | ((WheelDelta > 0) ? LEDS_LED3 : LEDS_LED4));
 						}
@@ -158,7 +158,7 @@ int main(void)
 								 (ReportItem->ItemType                == HID_REPORT_ITEM_In))
 						{
 							int16_t DeltaMovement = HID_ALIGN_DATA(ReportItem, int16_t);
-							
+
 							if (DeltaMovement)
 							{
 								if (ReportItem->Attributes.Usage.Usage == USAGE_X)
@@ -168,13 +168,13 @@ int main(void)
 							}
 						}
 					}
-					
+
 					LEDs_SetAllLEDs(LEDMask);
 				}
-				
+
 				break;
 		}
-	
+
 		HID_Host_USBTask(&Mouse_HID_Interface);
 		USB_USBTask();
 	}
@@ -244,7 +244,7 @@ void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
 	                         " -- Error Code %d\r\n"
 	                         " -- Sub Error Code %d\r\n"
 	                         " -- In State %d\r\n" ESC_FG_WHITE), ErrorCode, SubErrorCode, USB_HostState);
-	
+
 	LEDs_SetAllLEDs(LEDMASK_USB_ERROR);
 }
 
@@ -286,3 +286,4 @@ bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem)
 	return ((CurrentItem->Attributes.Usage.Page == USAGE_PAGE_BUTTON) ||
 	        (CurrentItem->Attributes.Usage.Page == USAGE_PAGE_GENERIC_DCTRL));
 }
+
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
index 3b26cead5..e4958b7c5 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.h
@@ -1,7 +1,7 @@
 /*
              LUFA Library
      Copyright (C) Dean Camera, 2010.
-              
+
   dean [at] fourwalledcubicle [dot] com
       www.fourwalledcubicle.com
 */
@@ -9,13 +9,13 @@
 /*
   Copyright 2010  Dean Camera (dean [at] fourwalledcubicle [dot] com)
 
-  Permission to use, copy, modify, distribute, and sell this 
+  Permission to use, copy, modify, distribute, and sell this
   software and its documentation for any purpose is hereby granted
-  without fee, provided that the above copyright notice appear in 
+  without fee, provided that the above copyright notice appear in
   all copies and that both that the copyright notice and this
-  permission notice and warranty disclaimer appear in supporting 
-  documentation, and that the name of the author not be used in 
-  advertising or publicity pertaining to distribution of the 
+  permission notice and warranty disclaimer appear in supporting
+  documentation, and that the name of the author not be used in
+  advertising or publicity pertaining to distribution of the
   software without specific, written prior permission.
 
   The author disclaim all warranties with regard to this
@@ -50,7 +50,7 @@
 		#include <LUFA/Drivers/Board/LEDs.h>
 		#include <LUFA/Drivers/USB/USB.h>
 		#include <LUFA/Drivers/USB/Class/HID.h>
-		
+
 	/* Macros: */
 		/** LED mask for the library LED driver, to indicate that the USB interface is not ready. */
 		#define LEDMASK_USB_NOTREADY        LEDS_LED1
@@ -78,20 +78,21 @@
 
 		/** HID Report Descriptor Usage value for a Y axis movement. */
 		#define USAGE_Y                     0x31
-		
+
 		/** HID Report Descriptor Usage value for a Scroll Wheel movement. */
 		#define USAGE_SCROLL_WHEEL          0x38
 
 	/* Function Prototypes: */
 		void SetupHardware(void);
-	
+
 		void EVENT_USB_Host_HostError(const uint8_t ErrorCode);
 		void EVENT_USB_Host_DeviceAttached(void);
 		void EVENT_USB_Host_DeviceUnattached(void);
 		void EVENT_USB_Host_DeviceEnumerationFailed(const uint8_t ErrorCode,
 		                                            const uint8_t SubErrorCode);
 		void EVENT_USB_Host_DeviceEnumerationComplete(void);
-		
+
 		bool CALLBACK_HIDParser_FilterHIDReportItem(HID_ReportItem_t* const CurrentItem);
-		
+
 #endif
+
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
index febd4a939..fdcdb6153 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/MouseHostWithParser.txt
@@ -3,7 +3,7 @@
  *  This file contains special DoxyGen information for the generation of the main page and other special
  *  documentation pages. It is not a project source file.
  */
- 
+
 /** \mainpage Mouse Host With HID Descriptor Parser Demo
  *
  *  \section SSec_Compat Demo Compatibility:
@@ -25,7 +25,7 @@
  *    <td><b>USB Class:</b></td>
  *    <td>Human Interface Device (HID)</td>
  *   </tr>
- *   <tr> 
+ *   <tr>
  *    <td><b>USB Subclass:</b></td>
  *    <td>N/A</td>
  *   </tr>
@@ -41,19 +41,19 @@
  *   </tr>
  *  </table>
  *
- *  \section SSec_Description Project Description: 
+ *  \section SSec_Description Project Description:
  *
  *  Mouse host demonstration application. This gives a simple reference
  *  application for implementing a USB Mouse host, for USB mice using
  *  the standard mouse HID profile. It uses a HID parser for the HID
  *  reports, allowing for correct operation across all USB mice. This
  *  demo supports mice with a single HID report.
- *  
+ *
  *  Mouse and scroll wheel movement and button presses are displayed
  *  on the board LEDs. On connection to a USB mouse, the report items
  *  will be processed and printed as a formatted list through the USART
  *  before the mouse is fully enumerated.
- *  
+ *
  *  Currently only single interface mice are supported.
  *
  *  \section SSec_Options Project Options
@@ -68,3 +68,4 @@
  *   </tr>
  *  </table>
  */
+
diff --git a/Demos/Host/ClassDriver/MouseHostWithParser/makefile b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
index aacce7a04..48923b2de 100644
--- a/Demos/Host/ClassDriver/MouseHostWithParser/makefile
+++ b/Demos/Host/ClassDriver/MouseHostWithParser/makefile
@@ -47,7 +47,7 @@
 # make doxygen = Generate DoxyGen documentation for the project (must have
 #                DoxyGen installed)
 #
-# make debug = Start either simulavr or avarice as specified for debugging, 
+# make debug = Start either simulavr or avarice as specified for debugging,
 #              with avr-gdb or avr-insight as the front end for debugging.
 #
 # make filename.s = Just compile filename.c into the assembler code only.
@@ -64,14 +64,14 @@ MCU = at90usb1287
 
 
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
-# LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
+# LUFA board drivers). If USER is selected, put custom board drivers in a directory called
 # "Board" inside the application directory.
 BOARD = USBKEY
 
 
 # Processor frequency.
-#     This will define a symbol, F_CPU, in all source code files equal to the 
-#     processor frequency in Hz. You can then use this symbol in your source code to 
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
 #     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
 #     automatically to create a 32-bit value in your source code.
 #
@@ -84,7 +84,7 @@ F_CPU = 8000000
 
 
 # Input clock frequency.
-#     This will define a symbol, F_CLOCK, in all source code files equal to the 
+#     This will define a symbol, F_CLOCK, in all source code files equal to the
 #     input clock frequency (before any prescaling is performed) in Hz. This value may
 #     differ from F_CPU if prescaling is used on the latter, and is required as the
 #     raw input clock is fed directly to the PLL sections of the AVR for high speed
@@ -133,7 +133,7 @@ SRC = $(TARGET).c                                                 \
 
 
 # List C++ source files here. (C dependencies are automatically generated.)
-CPPSRC = 
+CPPSRC =
 
 
 # List Assembler source files here.
@@ -146,7 +146,7 @@ CPPSRC =
 ASRC =
 
 
-# Optimization level, can be [0, 1, 2, 3, s]. 
+# Optimization level, can be [0, 1, 2, 3, s].
 #     0 = turn off optimization. s = optimize for size.
 #     (Note: 3 is not always the best optimization level. See avr-libc FAQ.)
 OPT = s
@@ -260,7 +260,7 @@ CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS))
 #             for use in COFF files, additional information about filenames
 #             and function names needs to be present in the assembler source
 #             files -- see avr-libc docs [FIXME: not yet described there]
-#  -listing-cont-lines: Sets the maximum number of continuation lines of hex 
+#  -listing-cont-lines: Sets the maximum number of continuation lines of hex
 #       dump that will be displayed for a given single line of source input.
 ASFLAGS = $(ADEFS) -Wa,-adhlns=$(<:%.S=$(OBJDIR)/%.lst),-gstabs,--listing-cont-lines=100
 
@@ -273,7 +273,7 @@ PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min
 PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt
 
 # If this is left blank, then it will use the Standard printf version.
-PRINTF_LIB = 
+PRINTF_LIB =
 #PRINTF_LIB = $(PRINTF_LIB_MIN)
 #PRINTF_LIB = $(PRINTF_LIB_FLOAT)
 
@@ -285,7 +285,7 @@ SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min
 SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt
 
 # If this is left blank, then it will use the Standard scanf version.
-SCANF_LIB = 
+SCANF_LIB =
 #SCANF_LIB = $(SCANF_LIB_MIN)
 #SCANF_LIB = $(SCANF_LIB_FLOAT)
 
@@ -297,7 +297,7 @@ MATH_LIB = -lm
 #     Each directory must be seperated by a space.
 #     Use forward slashes for directory separators.
 #     For a directory that has spaces, enclose it in quotes.
-EXTRALIBDIRS = 
+EXTRALIBDIRS =
 
 
 
@@ -320,7 +320,7 @@ EXTMEMOPTS =
 #    -Map:      create map file
 #    --cref:    add cross reference to  map file
 LDFLAGS  = -Wl,-Map=$(TARGET).map,--cref
-LDFLAGS += -Wl,--relax 
+LDFLAGS += -Wl,--relax
 LDFLAGS += -Wl,--gc-sections
 LDFLAGS += $(EXTMEMOPTS)
 LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
@@ -354,7 +354,7 @@ AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
 #AVRDUDE_NO_VERIFY = -V
 
 # Increase verbosity level.  Please use this when submitting bug
-# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude> 
+# reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
 # to submit bug reports.
 #AVRDUDE_VERBOSE = -v -v
 
@@ -388,7 +388,7 @@ JTAG_DEV = /dev/com1
 DEBUG_PORT = 4242
 
 # Debugging host used to communicate between GDB / avarice / simulavr, normally
-#     just set to localhost unless doing some sort of crazy debugging when 
+#     just set to localhost unless doing some sort of crazy debugging when
 #     avarice is running on a different computer.
 DEBUG_HOST = localhost
 
@@ -417,7 +417,7 @@ WINSHELL = cmd
 MSG_ERRORS_NONE = Errors: none
 MSG_BEGIN = -------- begin --------
 MSG_END = --------  end  --------
-MSG_SIZE_BEFORE = Size before: 
+MSG_SIZE_BEFORE = Size before:
 MSG_SIZE_AFTER = Size after:
 MSG_COFF = Converting to AVR COFF:
 MSG_EXTENDED_COFF = Converting to AVR Extended COFF:
@@ -436,10 +436,10 @@ MSG_CREATING_LIBRARY = Creating library:
 
 
 # Define all object files.
-OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o) 
+OBJ = $(SRC:%.c=$(OBJDIR)/%.o) $(CPPSRC:%.cpp=$(OBJDIR)/%.o) $(ASRC:%.S=$(OBJDIR)/%.o)
 
 # Define all listing files.
-LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst) 
+LST = $(SRC:%.c=$(OBJDIR)/%.lst) $(CPPSRC:%.cpp=$(OBJDIR)/%.lst) $(ASRC:%.S=$(OBJDIR)/%.lst)
 
 
 # Compiler flags to generate dependency files.
@@ -504,11 +504,11 @@ sizeafter:
 
 
 # Display compiler version information.
-gccversion : 
+gccversion :
 	@$(CC) --version
 
 
-# Program the device.  
+# Program the device.
 program: $(TARGET).hex $(TARGET).eep
 	$(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
@@ -535,9 +535,9 @@ dfu-ee: $(TARGET).hex $(TARGET).eep
 
 
 # Generate avr-gdb config/init file which does the following:
-#     define the reset signal, load the target file, connect to target, and set 
+#     define the reset signal, load the target file, connect to target, and set
 #     a breakpoint at main().
-gdb-config: 
+gdb-config:
 	@$(REMOVE) $(GDBINIT_FILE)
 	@echo define reset >> $(GDBINIT_FILE)
 	@echo SIGNAL SIGHUP >> $(GDBINIT_FILE)
@@ -635,14 +635,14 @@ extcoff: $(TARGET).elf
 $(OBJDIR)/%.o : %.c
 	@echo
 	@echo $(MSG_COMPILING) $<
-	$(CC) -c $(ALL_CFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CFLAGS) $< -o $@
 
 
 # Compile: create object files from C++ source files.
 $(OBJDIR)/%.o : %.cpp
 	@echo
 	@echo $(MSG_COMPILING_CPP) $<
-	$(CC) -c $(ALL_CPPFLAGS) $< -o $@ 
+	$(CC) -c $(ALL_CPPFLAGS) $< -o $@
 
 
 # Compile: create assembler files from C source files.
@@ -664,7 +664,7 @@ $(OBJDIR)/%.o : %.S
 
 # Create preprocessed source for use in sending a bug report.
 %.i : %.c
-	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ 
+	$(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@
 
 
 # Target: clean project.
@@ -708,3 +708,4 @@ $(shell mkdir $(OBJDIR) 2>/dev/null)
 build elf hex eep lss sym coff extcoff doxygen clean          \
 clean_list clean_doxygen program dfu flip flip-ee dfu-ee      \
 debug gdb-config
+