Added the --suppress-bootloader-mem option to the makefile dfu target, to ensure that writes to the bootloader section of the AVR's flash memory are ignored (thanks to Axel Rohde).

Fixed incorrect command name for EEPROM memory programming in the makefile dfu-ee target.

Makefile whitespace fixes.

12 files changed, 36 insertions, 36 deletions

diff --git a/Demos/Device/LowLevel/AudioInput/makefile b/Demos/Device/LowLevel/AudioInput/makefile
index 86bc0948c..3e4273a73 100644
--- a/Demos/Device/LowLevel/AudioInput/makefile
+++ b/Demos/Device/LowLevel/AudioInput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -522,7 +522,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -533,7 +533,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/AudioOutput/makefile b/Demos/Device/LowLevel/AudioOutput/makefile
index bf189c309..86bb0b791 100644
--- a/Demos/Device/LowLevel/AudioOutput/makefile
+++ b/Demos/Device/LowLevel/AudioOutput/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -524,7 +524,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -535,7 +535,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/DualVirtualSerial/makefile b/Demos/Device/LowLevel/DualVirtualSerial/makefile
index fbd5d459b..40b5a2c2f 100644
--- a/Demos/Device/LowLevel/DualVirtualSerial/makefile
+++ b/Demos/Device/LowLevel/DualVirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/GenericHID/makefile b/Demos/Device/LowLevel/GenericHID/makefile
index 9fa56a550..be6da3c6b 100644
--- a/Demos/Device/LowLevel/GenericHID/makefile
+++ b/Demos/Device/LowLevel/GenericHID/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/Joystick/makefile b/Demos/Device/LowLevel/Joystick/makefile
index 553a89aee..49697f7ab 100644
--- a/Demos/Device/LowLevel/Joystick/makefile
+++ b/Demos/Device/LowLevel/Joystick/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/Keyboard/makefile b/Demos/Device/LowLevel/Keyboard/makefile
index a7fcdbb2c..3794c5088 100644
--- a/Demos/Device/LowLevel/Keyboard/makefile
+++ b/Demos/Device/LowLevel/Keyboard/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/KeyboardMouse/makefile b/Demos/Device/LowLevel/KeyboardMouse/makefile
index d59329848..dcd70e04b 100644
--- a/Demos/Device/LowLevel/KeyboardMouse/makefile
+++ b/Demos/Device/LowLevel/KeyboardMouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/MIDI/makefile b/Demos/Device/LowLevel/MIDI/makefile
index 784709d4a..45a8c06be 100644
--- a/Demos/Device/LowLevel/MIDI/makefile
+++ b/Demos/Device/LowLevel/MIDI/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/MassStorage/makefile b/Demos/Device/LowLevel/MassStorage/makefile
index 9f740fb3b..b55334b92 100644
--- a/Demos/Device/LowLevel/MassStorage/makefile
+++ b/Demos/Device/LowLevel/MassStorage/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -523,7 +523,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -534,7 +534,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/Mouse/makefile b/Demos/Device/LowLevel/Mouse/makefile
index af82d9aaf..99467e769 100644
--- a/Demos/Device/LowLevel/Mouse/makefile
+++ b/Demos/Device/LowLevel/Mouse/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/RNDISEthernet/makefile b/Demos/Device/LowLevel/RNDISEthernet/makefile
index 0bb88470e..ed17d3662 100644
--- a/Demos/Device/LowLevel/RNDISEthernet/makefile
+++ b/Demos/Device/LowLevel/RNDISEthernet/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -541,7 +541,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -552,7 +552,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset
 
 
diff --git a/Demos/Device/LowLevel/VirtualSerial/makefile b/Demos/Device/LowLevel/VirtualSerial/makefile
index dacd22e8d..89ad42ca4 100644
--- a/Demos/Device/LowLevel/VirtualSerial/makefile
+++ b/Demos/Device/LowLevel/VirtualSerial/makefile
@@ -66,7 +66,7 @@ MCU = at90usb1287
 # Target board (see library "Board Types" documentation, NONE for projects not requiring
 # LUFA board drivers). If USER is selected, put custom board drivers in a directory called 
 # "Board" inside the application directory.
-BOARD  = USBKEY
+BOARD = USBKEY
 
 
 # Processor frequency.
@@ -521,7 +521,7 @@ flip: $(TARGET).hex
 
 dfu: $(TARGET).hex
 	dfu-programmer $(MCU) erase
-	dfu-programmer $(MCU) flash --debug 1 $(TARGET).hex
+	dfu-programmer $(MCU) flash --suppress-bootloader-mem --debug 1 $(TARGET).hex
 	dfu-programmer $(MCU) reset
 
 flip-ee: $(TARGET).hex $(TARGET).eep
@@ -532,7 +532,7 @@ flip-ee: $(TARGET).hex $(TARGET).eep
 	$(REMOVE) $(TARGET)eep.hex
 
 dfu-ee: $(TARGET).hex $(TARGET).eep
-	dfu-programmer $(MCU) flash-eeprom --debug 1 --suppress-bootloader-mem $(TARGET).eep
+	dfu-programmer $(MCU) eeprom-flash --debug 1 --suppress-bootloader-mem $(TARGET).eep
 	dfu-programmer $(MCU) reset