Added const modifiers to device mode class drivers.

Added parameter directions to function parameter documentation.

Added new experimental FAST_STREAM_FUNCTIONS compile time option to speed up stream transfers at the expense of a higher FLASH consumption (needs testing to verify improved throughput).

3 files changed, 14 insertions, 14 deletions

diff --git a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
index 4b624190f..c5035fe0a 100644
--- a/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
+++ b/Demos/Device/LowLevel/MassStorage/Lib/DataflashManager.c
@@ -43,8 +43,8 @@
  *  the pre-selected data OUT endpoint. This routine reads in OS sized blocks from the endpoint and writes

  *  them to the dataflash in Dataflash page sized blocks.

  *

- *  \param BlockAddress  Data block starting address for the write sequence

- *  \param TotalBlocks   Number of blocks of data to write

+ *  \param[in] BlockAddress  Data block starting address for the write sequence

+ *  \param[in] TotalBlocks   Number of blocks of data to write

  */

 void DataflashManager_WriteBlocks(const uint32_t BlockAddress, uint16_t TotalBlocks)

 {

@@ -168,8 +168,8 @@ void DataflashManager_WriteBlocks(const uint32_t BlockAddress, uint16_t TotalBlo
  *  the pre-selected data IN endpoint. This routine reads in Dataflash page sized blocks from the Dataflash

  *  and writes them in OS sized blocks to the endpoint.

  *

- *  \param BlockAddress  Data block starting address for the read sequence

- *  \param TotalBlocks   Number of blocks of data to read

+ *  \param[in] BlockAddress  Data block starting address for the read sequence

+ *  \param[in] TotalBlocks   Number of blocks of data to read

  */

 void DataflashManager_ReadBlocks(const uint32_t BlockAddress, uint16_t TotalBlocks)

 {

@@ -271,9 +271,9 @@ void DataflashManager_ReadBlocks(const uint32_t BlockAddress, uint16_t TotalBloc
  *  dataflash in Dataflash page sized blocks. This can be linked to FAT libraries to write files to the

  *  dataflash.

  *

- *  \param BlockAddress  Data block starting address for the write sequence

- *  \param TotalBlocks   Number of blocks of data to write

- *  \param BufferPtr     Pointer to the data source RAM buffer

+ *  \param[in] BlockAddress  Data block starting address for the write sequence

+ *  \param[in] TotalBlocks   Number of blocks of data to write

+ *  \param[in] BufferPtr     Pointer to the data source RAM buffer

  */

 void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, uint16_t TotalBlocks, uint8_t* BufferPtr)

 {

@@ -367,9 +367,9 @@ void DataflashManager_WriteBlocks_RAM(const uint32_t BlockAddress, uint16_t Tota
  *  and writes them in OS sized blocks to the given buffer. This can be linked to FAT libraries to read

  *  the files stored on the dataflash.

  *

- *  \param BlockAddress  Data block starting address for the read sequence

- *  \param TotalBlocks   Number of blocks of data to read

- *  \param BufferPtr     Pointer to the data destination RAM buffer

+ *  \param[in] BlockAddress  Data block starting address for the read sequence

+ *  \param[in] TotalBlocks   Number of blocks of data to read

+ *  \param[out] BufferPtr    Pointer to the data destination RAM buffer

  */

 void DataflashManager_ReadBlocks_RAM(const uint32_t BlockAddress, uint16_t TotalBlocks, uint8_t* BufferPtr)

 {

diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
index 5993a546d..53d773ffb 100644
--- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
+++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.c
@@ -302,7 +302,7 @@ static bool SCSI_Command_Send_Diagnostic(void)
  *  and total number of blocks to process, then calls the appropriate low-level dataflash routine to handle the actual

  *  reading and writing of the data.

  *

- *  \param IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)

+ *  \param[in] IsDataRead  Indicates if the command is a READ (10) command or WRITE (10) command (DATA_READ or DATA_WRITE)

  *

  *  \return Boolean true if the command completed successfully, false otherwise.

  */

diff --git a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
index d7693cafb..5002df5d4 100644
--- a/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
+++ b/Demos/Device/LowLevel/MassStorage/Lib/SCSI.h
@@ -54,9 +54,9 @@
 		 *  is for convenience, as it allows for all three sense values (returned upon request to the host to give information about

 		 *  the last command failure) in a quick and easy manner.

 		 *

-		 *  \param key    New SCSI sense key to set the sense code to

-		 *  \param acode  New SCSI additional sense key to set the additional sense code to

-		 *  \param aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to

+		 *  \param[in] key    New SCSI sense key to set the sense code to

+		 *  \param[in] acode  New SCSI additional sense key to set the additional sense code to

+		 *  \param[in] aqual  New SCSI additional sense key qualifier to set the additional sense qualifier code to

 		 */

 		#define SCSI_SET_SENSE(key, acode, aqual)  MACROS{ SenseData.SenseKey = key;              \

 		                                                   SenseData.AdditionalSenseCode = acode; \